SANIFLO SANIACCESS 3 UPFLUSH MACERATOR PUMP + ROUND TOILET KIT, WHITE FINISH

How to troubleshoot a toilet that does not discharge

Toilets usually work without much maintenance, so a toilet that does not go flush could cause some concern for a homeowner. It is a simple plumbing fixture. The reservoir on the back of the toilet bowl contains water that removes debris. A handle on the front of the tank raises the arm inside the tank. The arm pulls a plunger that holds the water inside the tank. When the plunger is lifted, the water runs in the toilet bowl. If any of these components breaks, the toilet does not discharge.



SANIFLO SANIACCESS 3 UPFLUSH MACERATOR PUMP + ROUND TOILET KIT, WHITE FINISH

Instructions

1 Lift the lid of the toilet tank and set it aside.

2 Inspect the handle and make sure that the handle arm is still attached to the handle. Push the handle down to see the arm of the handle in action. It should be lifted up and down.

3 Place the chain that goes to the fin on the bottom of the tank if it has fallen. Make sure there is enough slack in the fin chain to close, but it is short enough that the fin lifts when the handle is rotated.

4 Check the trap and make sure it is connected to the discharge valve and that it moves freely.

KOHLER K-4197-96 Wellworth Round-Front Bowl, Biscuit

What to do with a toilet that overflows

A flooded toilet presents an immediate problem that must be resolved before the toilet can be used again. First you will have to stop the toilet from overflowing, and deal with the blockage in the drain pipe of the toilet bowl to prevent it from overflowing again. Avoid clogging your toilet by using less toilet paper and not putting other objects in the toilet.



KOHLER K-4197-96 Wellworth Round-Front Bowl, Biscuit

Close the tap

First you will have to stop the toilet from overflowing by cutting off the toilet's water supply. You will have to locate the closing valve of the toilet, which is usually located near the floor behind or next to the toilet. Once you find the valve, turn the lever to the right as far as your hand can use it. Do not use a wrench or other tool to tighten the handle, or you could damage the handle or valve. If the water continues to flow, you will have to close the main water valve in the house, which will turn off all the water in the house, until the toilet can be repaired. Clean the water on the floor since it left that can lead to water damage or mold growth.

Use a plunger

Find a funnel cup plunger to use in the toilet, as it has a curved extension in the bottom of the cup that creates more pressure in the toilet's drain pipe. Regular plungers that have a simple cup of them work best in sinks and tubs when they clog. It is necessary to place the plunger cup in the toilet and cover the drainage hole, creating an airtight seal between the container and the edges of the plunger cup. Vigorously pump the handle of the plunger up and down at least a dozen times, remove the cup from the drain hole and pull the chain to see if the clogging persists. Continue sinking if you see the progress; otherwise go to the auger.

Use an endless screw

A closet auger consists of a handle and a long, flexible hose that has a metal hook or corkscrew on one end. You feed the flexible part of the auger in the toilet drain opening, hook or at the end of the corkscrew first, ensure that you do not scratch the porcelain. Turn the handle to the right of the auger to feed more deeply into the toilet drain pipe and to push through any blockage in the pipe. Once you reach the end of the flexible hose, retract the drain screw by turning the handle to the left. Depending on the severity of the obstruction is, you may have to feed the auger in the toilet up to three times. The first time it is needed to point towards the center of the leak; in subsequent attempts feed the auger through the left and right walls of the leak in an effort to clean the entire drain pipe.

Call a plumber

Some toilet blockages will still not come free, even after using an endless screw. These clogs require the experience of a trained plumber, who will employ additional methods that are necessary to return his toilet to his normal work order. There may be a bigger problem in your home's plumbing if you notice water backing up in other drains in your home.

Kohler K-4067-NY Bancroft Comfort Height Elongated Bowl, Dune

Problems with the float valve in a toilet

Toilets are a useful modern convenience when they are functioning properly, but can be irritating when they have problems. Understanding how the toilet works will make it much easier to treat if and when problems develop. The problem with a toilet in constant operation or leaks is usually related to the float valve. Only old toilets have float valves; these have been replaced in the new toilets with discharge valves.



Kohler K-4067-NY Bancroft Comfort Height Elongated Bowl, Dune

Tilted arm float valve

If the toilet is running constantly, either, or stops before the bowl has been filled, the problem may be that the arm of your float valve is bent, causing the float valve to be at the wrong height. Remove the lid of the toilet tank from your rear and take a look. The plastic or metal ball that floats on the surface of the water is the float valve. When the water rises high enough, the ball is pushed upwards and a shut-off valve is activated. If the arm bends up, the water will reach high enough to start running the overflow before closing the valve. If the arm bends down, the valve will close before the bowl has finished filling.

Waterlog

Sometimes, the float valve can develop a crack or leak, causing it to fill with water. When this happens, it no longer floats on the surface of the water. When the chain is pulled, the rear tank will refill, but the ball will not float on the surface of the water, and the water will simply continue to run in the rear tank and exit through the overflow valve.

Break

If the arm of the float valve is bent or shaken too badly, the float valve may break out of it. If you take the lid of your rear tank and you see the float valve floating in the water, but not connected to anything, this is obviously what happened. You will probably need to replace both the float and the float arm to operate the toilet correctly.

Mansfield 135WHT 135010007 White Elong Toilet Bowl

Problem with a toilet that does not get enough pressure

If you accidentally press the handle on a toilet and, instead of listening to a color, are greeted by the sound of an empty tank, you are likely to have a water pressure problem on your hands. Since plumbing systems are made up of a number of different parts, there may be some reasons why you have a problem with a toilet not getting enough pressure.



Mansfield 135WHT 135010007 White Elong Toilet Bowl

Main water

If the toilet is not getting enough pressure, the first thing to check is the main water that reaches your home. This is the main line that all the water in your house is pumped through. In urban areas, this is generally maintained by the city or municipality, while in rural areas this can be managed by the county or it may have its own water supply. Turn on the other appliances or accessories in your home that use the water. If none of them has water, then this is the problem. Contact your city or city office to see who to speak or, if you have a private offer, a local plumber.

The plumbing pipes

Between the main water and the toilet are the plumbing pipes that carry water to the water supply valve. If one of these tubes blocked or begins to release, there will be no pressure in the toilet. Check the pressure in said ducts by opening the nearest faucet, since these are usually in the same feed tube as the toilet. If there is no pressure in the tap, the problem is in the plumbing pipes. These pipes, unfortunately, are usually buried inside wall spaces. In order to repair, remove the drywall (and any tile covering) to access the pipes.

Water supply valve

The water supply valve is located between the water supply pipe and the supply hose for the toilet. These accessories are usually made of metal and project about three or four inches from the wall behind the toilet cistern. If the water supply valve is clogged or damaged, it will not bring the water to the toilet cistern. To check, turn the handle on top of the supply tube by turning it all the way to the right. Disconnect the water supply hose for the toilet. Place a towel on the floor under the valve. Open the valve slowly. If the water comes out, then the valve is good. If not, replace the valve. Turn off the water supply before removing the old valve and replacing it with a new one.

Toilet filling valve

The last step in the water supply chain of a toilet is the filling valve. The filling valve is in the toilet tank. A supply hose connects the supply valve to the bottom of the fill valve. A malfunction of the filling or broken valve will not have enough pressure to fill the tank above. Filling valves are very expensive to buy and easy to replace; They are really not worth the trouble of trying to repair. Also, if it is a larger filling valve without anti-siphon technology, you may be in code violation if you try to repair an old one. To replace, close the water supply, unscrew the water supply hose, loosen the nut on the bottom of the fill valve and replace it with a new one.

KOHLER K-4325-L-0 Kingston(TM) Wall-Mounted 1.6 or 1.28 GPF Flushometer Valve Toilet Bowl with Top Inlet and Bedpan Lugs, Without Seat, White White

Problem with a toilet that emits a suction sound

Your toilet can make some noise each time you wash, otherwise a suction sound indicates a problem, either with a blockage in the drain pipe or an obstruction or damage to the toilet ventilation tube. As the owner, you have the ability to take care of the simple problems that can make the sucking sound. You may find, however, that the problem requires the experience of a plumber.



KOHLER K-4325-L-0 Kingston(TM) Wall-Mounted 1.6 or 1.28 GPF Flushometer Valve Toilet Bowl with Top Inlet and Bedpan Lugs, Without Seat, White White

clogs

A partial clog in the toilet drain line can result in the toilet making a sucking sound each time it is discharged. The clogging in the toilet drain line traps the air behind it, which leads to strange sounds, and even bubbles going up the toilet drain and into the container. If sinking the toilet does not dislodge the clogging of the drain pipe, turn to an endless closet for help. The auger's flexible line is fed through the drain line that curves the toilet bowl and pushes the blockage, or the hook at the end of the auger catches the clog and pulls it out of the leak.

Inadequate ventilation

Your toilet's drain line connects to a vent pipe, which performs a dual function. The ventilation pipe extends vertically up through the roof of the house, where fresh air is introduced into the old pipe as the air in the lava tubes down with the waste water. The vent pipe also transports the sewer gases into the pipes safely away from the house. A problem such as an obstruction in the ventilation tube leads to inadequate ventilation and suction sounds when the water is washed down the drain. Water demolition of the roof vent pipe, using its hose, should dislodge most of the obstructions in the vent pipes. A flashlight should allow you to see if there are blockages in the vent pipe, and see any progress you make in removing an obstruction.

Vent pipe damage

While you are throwing water down the vent pipe, have someone or several people in the house looking at the walls and ceilings to detect any signs of water leaks. If they detect any leak, they tell you immediately so you can stop shooting the water through the vent pipe. A leak indicates the ventilation pipe has a damage that affects the correct operation of the pipe.

Professional Help

If you see a nuisance and can not be removed, a professional plumber can help. The plumber has tools that reach the ventilation pipes and either push the obstructions out of the way or remove them. A plumber can also help if there are no problems with the vent pipe and yet the suction sounds continue. Plumbers have a machine that creates false smoke, which allows them to see where the obstructions or breaks in the vent pipe are located.

Danze DC013230BC Orrington Elongated Toilet Bowl with Soft Close Seat, Biscuit (Bowl Only)

Problems with a toilet

The toilet, without a doubt, is one of the most important aspects of your home, which can make extreme conditions when it is not being washed properly. Toilets are not terribly complex machines, and any washing problem can usually be diagnosed and fixed, either with a plunger or a quick trip to the hardware store.



Danze DC013230BC Orrington Elongated Toilet Bowl with Soft Close Seat, Biscuit (Bowl Only)

partial discharge

A weak fin could be the reason that your toilet flushes only partially, taking only about half the water in the container. The fin is a rubber device that "fins" in the toilet tank and covers the discharge valve between the tank and the bowl, which is where all the water drains when the toilet flushes. The fin should remain open until about 80 percent of the water has been drained from the tank, and then fall back down again. The fin, however, may decrease early if it is flooded, which prevents the rest of the water from escaping and keeps the wash bath complete. A new fin can be purchased at any hardware store and simply changed to solve the problem.

Phantom stuffing

Phantom filling is when the tank is filling with water constantly, even when the tank was not flushed. You will hear the characteristic sound of a "running toilet." This condition will make your flushes weak, as well as sewage. Phantom filling can result from a cracked fin that allow water to escape into the container instead of shut off. Replace the flap to remedy the problem. This condition can also be caused by a badly adjusted float, which causes the water to run down continuously from the toilet overflow tube and the filling valve does not close. Adjust the float so that it rises to the proper level and the fill valve goes off.

Jam

An obstruction is one of the most common problems with toilets. Clogs, can occur if too much toilet paper is used or if something strange, such as a comb or trash, is thrown down the drain. The sure sign of an obstruction is when a toilet simply does not discharge; when the discharge lever is pulled. Water will fill the container and sometimes spill on the ground. The solution is to use a plunger to aspirate what may be the cause of the obstruction. Sometimes, the obstruction can be remedied immediately, but other occasions will require the use of a hygienic snake or the services of a professional plumber.

Slow filling

Slow filling is when the toilet tank takes much longer to fill than normal, which means having to wait a long time between flushes. The filling valve regulates the water that enters the toilet tank. A floating device is used which, when it reaches a certain height, closes the valve so that the water does not overflow. The fill valve may have internal obstructions and will have to be replaced if the tank takes too long to fill. Filling valves can be purchased at hardware stores and easily changed. Just remember to close the water beforehand or it will come in spurts when the broken valve is removed.

KOHLER K-4309-96 Cimarron Comfort Height Elongated Toilet Bowl with Class Five Flushing Technology, Biscuit

Problems with two toilets

Two toilets are a preferred option for people who want or need to conserve water, but are concerned about the functionality of many low-flow toilets. According to Lowes, two toilets can reduce water consumption by 60 to 80 percent compared to older high-volume toilets. While double discharge models can make a big difference in water consumption, they are not without problems. Knowing the potential disadvantages of a double flush toilet can help owners make the right decisions about their bathroom remodeling.



KOHLER K-4309-96 Cimarron Comfort Height Elongated Toilet Bowl with Class Five Flushing Technology, Biscuit

Jam

According to John Eakes, two toilets and other flow models often clog, especially when installed in sewage systems that were not designed for them. This problem is most common with siphon toilets installed in bathrooms that do not see much use, such as a guest room. Washdown toilets may require more cleaning, but they do not tend to clog so often. Two toilets of all kinds work well when they are installed in bathrooms that see a lot of use as frequent washing prevents more waste material from accumulating in the drain pipe.

cost

Two toilets cost more than traditional individual toilets, due in large part to the lower demand for this style. As of 2010 and according to the Green Start Guide, two toilets start at around $ 175, compared to individual toilets that cost less than $ 100. Fortunately, the manufacturer competition and an increased demand for effective, conservative toilets of water is bringing little by little the models of double discharge down near the price of the most conventional baths. Two toilets also save water over time, resulting in a lower monthly water bill. It may take some time for this savings to pay off the difference in the initial cost of fixing though.

Cleaning

According to Lowes, dual-frequency toilet models require more cleaning and are harder to clean than standard single-flush models. These toilets retain less water in the container, which can result in increased dirt. It is also necessary to ensure that the water wells along the edges do not clog as this may decrease the ability of the toilet to function.

Plumbing Incompatibility

New residential construction takes the needs of flushing toilets into account, but dual flush models are not always compatible with old homes built when flush toilets were the norm. In addition, older plumbers have developed falls, sauces and other problems that prevent a double-flush toilet from working. Homeowners affected by the compatibility of their pipes should speak with an experienced professional before choosing a double-flush toilet.

Gerber Plumbing 21-372 Gerber Ultra Flush Watersense Elongated Toilet Bowl Only, White

Advantages and disadvantages of the two toilets

The purchase of a toilet is much more complicated than it used to be. Instead of having only one basic type of toilet to choose from, there are numerous toilet styles made by many manufacturers. The double flush toilet is a style that is being imposed for environmental and financial reasons.



Gerber Plumbing 21-372 Gerber Ultra Flush Watersense Elongated Toilet Bowl Only, White

Advantage - Environmental Impact

Dual-flush cisterns have a two-configuration activation mechanism that uses either a two-position lever or a two-button system. This allows you to decide whether or not you want to use a high volume color of water or a low volume color. The ability to use a smaller amount of water, when only washing away liquids allows you to ultimately save as much as a gallon and a half of water in each of the hot flashes, reducing your home's water consumption.

Advantage - Cost

In addition to the environmental boost for water savings, this also reduces your water bill over time. Dual discharge cisterns are also considered high efficiency. This means that some states have discount programs in place that help people subsidize the cost of upgrading the toilet in their home to a model that uses less water. Certainly, if you have this kind of bonus in your state, installing a double-flush toilet in the home will be more affordable than buying an old, non-efficient model.

Disadvantage - Cleaning

If you buy a double-flush toilet, you should expect to clean more often than you had to clean the standard toilets. The reason for this is that after each discharge, less water remains in the container. The toilet will start to look dirtier faster than standard-flush toilets do.

Disadvantage - Cost

Dual-flush cisterns are more expensive than the other options you could choose. Certainly, they are more expensive than a standard toilet. Both the cost of the purchase and the installation cost are higher than that of a standard toilet. A double-flush toilet, however, is often more expensive even than other high-efficiency toilet designs.

American Standard 3189.016.020 Colony FitRight Elongated Toilet Bowl, White (Bowl Only)

How do the two toilets work?

While most of us do not think much about bathing at the base of day to day, these accessories are a must. As we become more aware of how our actions impact the environment, more people are interested in the use of environmentally friendly products. The double flush toilet is one of those products. However, many people are curious about how well two toilets work.



American Standard 3189.016.020 Colony FitRight Elongated Toilet Bowl, White (Bowl Only)

How do the two toilets work?

Two toilets are designed to reduce the amount of water that is used each time a toilet is flushed. Two toilets differ from standard toilets in that they give users the ability to remove different amounts of water, depending on the type of waste that is emptied. Two toilets use less water to remove liquids than they do to remove solids, but both types of blushes use less water overall than standard toilets do.

Saving water

One thing that two toilets do very well is to conserve water. Some old style toilets use up to 5 gallons of water each time someone flushes. However, with two toilets, this number is drastically reduced. For example, washing the liquid waste in a double-flush toilet uses only one gallon of water or less. In addition, when solid waste is washed with a double-flush toilet, only 1.6 liters of water are used, which means it has the potential to hold more than 29,000 gallons of water each year if you change to a toilet double download of a traditional time.

Energy savings

A study conducted by the Canadian Mortgage and Housing (CMHC) monitors how well two toilets work, placing them in different homes, institutional and commercial environments. The study found that when two toilets were used in private residences, the discharge rate was reduced by 68 percent. In addition, blush rates in commercial companies dropped by 52 percent, while those of institutional facilities decreased by approximately 56 percent. While this conserves water, it also conserves energy. Each time a stool is emptied, the energy is used to pull the chain. Therefore, two toilets also work well in reducing energy.

Customer satisfaction

While it is good to know that double-flush toilets are ideal for those who want to go "green" for water conservation and energy reduction, many others are more concerned with how well two toilets work for the consumer. The same study conducted by the CSMC also examined the overall customer satisfaction of those who used two toilets. Overall appearance and functionality were rated as "satisfactory" or "good" in more than 85 percent of users. As a result, more than 66 percent of people said they would recommend double-flush toilets for others.

SANIFLO SANIACCESS 3 UPFLUSH MACERATOR PUMP + ELONGATED TOILET KIT, WHITE FINISH

How do toilet cleaners work?

Commercial Toilet Bowl, Cleaners

Some toilet cleaners use bleach, which will create toxic fumes when chlorine comes into contact with ammonia (urine contains ammonia). Other toilet bowl cleaners create a frothy, amorphous mass that rises when it hits the water in the toilet bowl. The foam is a concentration of bubbles that flush the toilet continuously bouncing against the surface of the toilet bowl. Blue liquid toilet cleaners operate more slowly than foam cleaners, and are made of chemicals that break down the deposits of dirt and minerals in the toilet bowl.



SANIFLO SANIACCESS 3 UPFLUSH MACERATOR PUMP + ELONGATED TOILET KIT, WHITE FINISH

The two most common types of bathroom cleansers are made from acidic or alkaline chemical ingredients. Acid cleaners contain phosphoric and citric acids, as well as alcohol, citrates and anionic or nonionic surfactants. Alkaline cleaners are made of sodium / hydroxide / hypochlorite carbonate, anionic / nonionic surfactants, citrates, glycol ethers, alcohol and sodium. Ammonium compounds are widely used in cleaning products of toilet bowls.

Acid cleaners

The soda can be used to clean the bathrooms. The acidity of the non-alcoholic beverage will eat away the dirt and minerals in the toilet bowl. Tail products are often used to clean the wheel bearings of the skids, and make a powerful bathroom cleaner. Soda pop is effective in the filth of eating on the plate. The lemon juice will remove the films and dirt, and weaken the mineral deposits in the toilet bowls. Toilet cleaners that are made of acids can be a liquid or powder. Acid powder cleaners (sodium hydrogen sulfate) work well for cleaning at night, because dust sticks to the inside of the toilet bowl. Unlike dust, acidic liquids (hydrochloric, phosphoric and oxalic acid) move slowly towards the hole in the toilet, bringing the dirt and mineral deposits with it. Quaternary ammonium chloride quaternary germicides in liquid bath cleaners, which should not be mixed with products containing chlorine (such as toilet bleach). The dye is included in liquid bath cleaners to alert the consumer that the acid cleaner is present in the toilet.

Cleaner Natural alternatives

Some natural remedies to clean the toilets are also effective, and do not include some of the toxic chemicals found in the trademark to clean the toilet. A homemade toilet cleaner is prepared from 2 tbsp. of baking soda, 1 tbsp. of olive oil and 1 teaspoon. of lemon juice. A simpler alternative, however, is white vinegar; It works best if you sit on the toilet and let it sit for 2 hours in a relatively clean toilet, or up to 24 hours for heavily soiled toilets. The same vinegar treatment is used to remove rust from old, corroded toilets, bathtubs and floor drains.

Gerber Plumbing VP-21-528 Gerber Viper Watersense High-Efficiency Elongated Siphon Jet Toilet Bowl, Ada-Compliant, 1.6 Gpf/1.28 Gpf, White - 2463449

Chemical toilets: tips for maintenance

Chemical toilets are portable sanitation units that consist of a sanitary device located on an airtight tank that stores excretions and that generally contain a chemical solution to facilitate dissolution and thus reduce odors. In addition, they are usually contained in a kind of prefabricated plastic cassette with a door that can be closed with a latch.



Gerber Plumbing VP-21-528 Gerber Viper Watersense High-Efficiency Elongated Siphon Jet Toilet Bowl, Ada-Compliant, 1.6 Gpf/1.28 Gpf, White - 2463449

These types of toilets are common for fairs and parties, as well as outdoor events such as concerts or festivals, sports activities ... that is, they are an element that is used a lot in this summer season. In addition to the advantage of portability, they also work autonomously, since they do not need to be connected to the water network or to the wells.

Precisely because of its purpose, the cleaning and maintenance of chemical toilets are vital. It is important that they be checked and emptied regularly to avoid overflow, but just as important, if not more, is to use a product that ensures the correct and rapid dissolution of the excretions to avoid clogging and bad odors.

Norden has created the chemical compound Provat I for use in bathrooms and chemical toilets, with which we ensure a perfect dissolution and destruction of excretions.

Chemical toilets: Characteristics of the product

• Provat I is a liquid concentrate to keep the toilet tank clean. It is very effective for the destruction of slurry, as well as to eliminate organic matter and avoid gases and bad odors. Provat I also has bactericidal and fungicidal components, and is registered in the Official Pesticide Register.

Advantages and benefits of using Provat I

•     Deodorizer.
•     Degrade organic matter.
•     Disinfectant power.
•     Concentrated product
•     Bactericide and fungicide.

Applications and form of use of the concentrated product for chemical toilets

Provat I is used in all types of chemical toilets for caravaning, airplanes, yachts, etc. to avoid the formation of bad odors or gases since it destroys organic matter and has bactericidal and fungicidal properties.

Regarding its use, 24 ml should be used. of product for every 4 liters of tank capacity for its dissolution. Fill the toilet immediately with enough water, so keep in mind that the liquid always covers fecal matter. If not, add the necessary water. Empty the contents of the tank in a place indicated for these purposes. Changes in temperature or alterations in the time limit between tank emptyings can lead to the use of a greater or lesser amount of product.

Presentation of Provat I

The concentrate for chemical toilets Provat I is presented as a transparent liquid with an intense blue color and characteristic odor. Provat I is distributed in bulk per liters in plastic containers, and can be purchased in 5, 10 and 30 liter bottles.