Vinegar to clean the tiles

Vinegar to clean the tiles

The tiles are the kings of the kitchens and bathrooms, and it is rare the house that does not count with them in any of these rooms. Its insulating and protective function of walls, as well as the possibility of cleaning them, something that we cannot do on the painting, makes them indisputable in these places.

Grout Cleaner Product

Although its cleanliness is very simple, not always the results accompany. And it is that the passage of time, coupled with factors such as daily accumulation of fat or lime make it difficult on many occasions for them to become shiny again.

There are specific products in the market for this task, but I'm going to recommend the methods I use and I have good results, both in the bathroom and in the kitchen, but when it comes to fighting lime I decant more for vinegar and fat I prefer ammonia.

Water and vinegar

Pour water and a good stream of white vinegar (a glass) into a container. Remove and with the help of a piece of newspaper paper soaked in the liquid, we are cleaning the tiles. We finished the task by passing a cloth moistened in water, to remove any rest that could remain. If the tiles have accumulated a lot of lime, they will glow like new if you wash them with hot vinegar. Wait a minute for them to dry and then frótalos with a clean, soft cloth. You'll be surprised at the results. We can also clean the faucets and shower head. For the latter, it is advisable to disassemble it and soak it with water and vinegar, at least one night.

Believe it or not, vinegarhas more than 1,000 uses and almost every time is more effective than any commercial product and much cheaper. In some post I will talk about this wonderful product that is a great ally for cleaning the home.

Water and ammonia

Same as the previous one, but replacing the vinegar with ammonia. Your results are very similar, we can choose the version that we like. The ammonia, another fantastic ally of the cleanliness of the home and of which I already wrote, is very useful for the tiles of the kitchen, since it is a magnificent degreaser and also leaves no trace, something that does happen with the lye.

Liquid soap and vinegar

Mix liquid soap From the one used for scrubbing with vinegar to the same proportion. You must shake it well and use it instantly applying with a sponge, and leaving it for 10-15 minutes. After take it with water, it also serves as bactericide. You can add a few drops of lemon.

Water Vapor

A quick and economical way to clean the kitchen tiles is to put a pressure cooker filled with water to the fire. Close windows and doors. The steam that releases the pot, moisten the tiles and reblandecerá the grease in them. Then you pass a dry cloth, and you're done.

Burning Alcohol

Clean the tiles with burning alcohol and a lint-free cotton rag. They're left with an incredible glow. There are those who mix alcohol of burning and ammonia in equal parts, add a jet of concentrated detergent and incorporate a pint of water and rub with a rag or paper. A quick way to clean the bathroom tiles is to pass them a cloth soaked in alcohol, soon to take a bath, when they still have vapor impregnated, as it soften the dirt.



TO IMPROVE THE Brightness: I have a friend who once finishes cleaning the tiles with any of the above methods, they pass a clean cloth with glass cleaner and the result is very good. In any case, if things are done right, with the above exposed is enough to achieve a perfect shine.

FOR JOINTS

For the perfect cleaning and whiteness of the joints there is also a very effective solution. There are products. There's even a kind of markers that paint the joints and leave them white. But what I suggest is much simpler, cheaper and you can repeat it whenever you want. Just take a bottle of bleach from those normally used for housekeeping and an old toothbrush, better if it is medium or hard-hardness bristles. On the same stopper of the bleach bottle, we put a little bit of it. There we wet the toothbrush and rub it all together. It's a good thing to wear latex gloves, as we're going to be with wet hands in lye for a while. I recommend to apply the lye first throughout the joint to go on acting and then we can proceed to rub a little in the places where the dirt is more embedded.



CAL IN HOUSEHOLD APPLIANCES

I cannot resist the temptation to give you advice in which vinegar is the protagonist. It is a matter of eliminating the lime that accumulates in the appliances, like the coffee machine or the iron, a very common problem in the hearth, especially in places where the water is hard, that is, that has a lot of lime. There is a very simple solution , economical and accessible to all. Just prepare the coffeemaker as if we were going to make coffee.... But we won't have coffee in the tank, just water with vinegar. How much vinegar? Well, that's a thing for everyone. If the coffeemaker is very clogged, that almost no water is released, we can use pure vinegar, as it is not a very strong acid. Let's say we pour a glass of pure vinegar. We connect the coffeemaker and let the Vinegar Act. If it is a routine cleaning, we can dilute that same vinegar in water and put it back into the tank, so now it would be two glasses. If it is still stuck, we can use pure vinegar again, but the most normal thing to do is to rinse it by preparing several coffeemakers with water without vinegar. This is very important (apart from the taste), because vinegar tends to be abrasive with aluminum, stings or oxidizes, and our coffeemaker can have some aluminum element inside. Rinsing perfectly, we will not have problems.

With the home plate we will act in a similar way. Fill the water tank with vinegar and give the self-clean button, or let all the steam out. We must pass it by an old rag, for it will surely stain. Finally, we do as with the coffee maker: we fill the tank with clean water to clarify. If it is distilled water, better, as it would carry better traces of vinegar and lime that could remain. And that easy. With regular cleaning, the coffeemakers and griddles will always be at full performance and will last much longer.

How to clean glass tile grout

How to clean glass tile grout

The glass tiles can provide your kitchen or bathroom with a beautiful wall cover. These tiles can be large, such as the type used in the bathroom windows, or small, like glass mosaics. Adhesives hold.

The glass tiles can provide your kitchen or bathroom with a beautiful wall cover. These tiles can be large, such as the type used in the bathroom windows, or small, like glass mosaics. Adhesives hold these tiles in place, and the grout fills the spaces in the middle. Occasionally the grout can get on the face of the tile. It is not difficult to clean glass-tile grout. The secret is to remove the grout as soon as you see it.

Grout Cleaner Product

Difficulty level: Easy moderately

Things you need

Removal chemicals removerGrout Polish WashclothSteel woolNail

Instructions

1 Soak the cloth in lukewarm water. Apply grout cloth on tile and rub to remove.

2 secure the towel in place over the grout you wish to clean. Keep the towel moist for at least 24 hours. Scrub to remove Grout.

3 Apply water to the grout thoroughly. Rub the grout gently with a piece of steel wool until it is removed.

4 Apply grout Removerus. Allow it to soak for a few minutes. Remove with a damp cloth.

Tips and warnings

• Try to clean the grout as soon as you notice it on the glass tile. The longer the grout sits, the harder it will be to eliminate.
• Clean all grout on glass tiles before applying grout sealant.
• A number of products on the market are specifically for cleaning the grout of the tiles.

Cleaning porcelain floor shine: THE BIG PROBLEM

Cleaning porcelain floor shine: THE BIG PROBLEM

Polished Porcelain Floor Polishing: THE BIG PROBLEM

The cleaning of porcelain floor Especially if it shines more than matte is a problem that brings head to many people who in their day decided to place a porcelain pavement shine in the Pavement of his house, and that if they come to know before, the cleaning problems that had had changed the type of pavement.

Grout Cleaner Product

If you have come to this article it is safest that you have placed a shiny porcelain pavement in your home and you have problems with stains, that the footprints are noticed, the wheels of the baby's cart, and you have misty areas and Others with luster, and that make you clean it 3 or 4 times a day without it fits you well.

When you go to a tile shop and you see a shiny porcelain pavement you fall in love with it, a glitter as if it were marble that the tile vendor speaks to you about its hardness, that is better than normal stoneware pavements , that if your enamel is the strongest and that if you drop something is more difficult to be stung than in a normal stoneware.

And it is true, in this case, what they tell you in the shop of tiles and pavements, but in many cases forget about the maintenance and cleaning of the porcelain floor, they forget to advise you that if you have children, pets or a high traffic of People, choose a model with a faded background instead of a monocolor.

And although it is not really the obligation of the seller, but it is advisable, because in case you do not end up happy or happy with the final finish of the porcelain floor, the way to place it, grout it and clean it, right after finishing the work, and how to do the limp N, you will return to your store at Reclamárselo.

Though, I have to say, that not all tile vendors are like this, I have visited shops, where the seller took different pieces of porcelain paving, put them on the floor, and stepped in front of me, telling me...-you see here do not notice the footprints, in this Other for example, if you have children or pets do not advise.

If it is for areas with low light or a few windows of natural light where the lighting comes from the ceiling, perfect I recommend this porcelain floor of high brightness, but if you have Windows or many windows where the sunlight enters in a oblique and affects the pavimen To porcelain, as it has so much shine is easier to be noticed footprints or stains.

A complete information, that perhaps now you have it on and you have the problem of cleaning porcelain floor gloss would have appreciated at that time, to make a better choice of pavement of the whole thing, changing the color, Changing the background, changing between gloss to matte, or directly changing the type of pavement.

Although this does not mean that you have chosen incorrectly when choosing a porcelain floor, if not you may have other problems that have solution and we will see throughout the article, or simply not doing the cleaning Properly, since the cleaning of porcelain floor is different from the rest of pavements.

And if you had never had a porcelain floor in your house, maybe you are using the cleaning techniques that you used with the previous floor and that you worked perfectly, but it turns out that now do not leave you well clean porcelain floor you have .

Let's start the article to see if the problem is due to some of these causes and if they have easy solution.



A good cleaning of porcelain floor starts from its tiling

The pavement of a house is practically the last thing that is placed in a comprehensive reform of masonry, or is the last thing that should be placed, to avoid that the works that the integral reform of masonry entails can make that the dirt that in the work is produced End up staining and tarnishing the shine of the porcelain pavement.

Like, if you're not going to do a comprehensive reform of masonry, if you are not going to reform the kitchen, or the bathroom, and you have porcelain floor in the rest of the floor of the house, the correct thing is that the bricklayers cover the same with a tarp to avoid the treads with Dirty feet above the porcelain floor that could tarnish it.

And if it is a reform of masonry, as after placing the porcelain floor, the carpenter must enter for kitchen furniture, doors and preframes, as well as the painter or the yesaire to make the walls, take the gotelé and paint, the right , is to cover the porcelain pavement, to avoid stains and dirt that could fall on top of it.
Porcelain Flooring Placement

The porcelain floor is to be placed with porcelain glue cement , is a logical thing, but if you did not know, it is advisable to know in order to hire the tiling of the porcelain floor with the bricklayers or the reformist, which must be with Porcelain glue cement with a level of teeth.

That you do not put the tiles porcelains with mortar or mixture of cement and sand, besides that over time will be released, this mixture of mortar lets the humidity pass, and if you live on a ground floor moisture will climb up the joints up , manchándote The edge of the porcelain floor gaskets.

It can even occur, depending on the type of porcelain flooring you have placed, as there are glazed porcelain floors, where only the enamel is porcelain, while the base of the piece is a normal tile cake, which if Placed with mortar or mixture of cement and sand, as this cake is not porcelain and has absorption, the pieces are tarnished under the enamel.

If you have the pieces fogged under the enamel, because you have placed the porcelain floor with mortar, you can do little, and you will see Machas normally in the center of the piece, which have a higher pitch than the rest of the pavement, and this is due to moisture D Ebajo of the piece.

Nor is it worth the time to place the Rachoas porcelains that use the technique of stained with cement glue, this technique is used by some bricklayers to save in cement glue and consists, after applying a layer of mortar leveling when the Mortar is still wet, applying a little porcelain glue cement on the base of the piece quite liquid and placing it on top of the mortar.

Since the mortar has not yet hardened and is mixed with the cement glue, it makes that in certain areas the piece is in direct contact with the mortar, which makes them look different spots or stains on the pavement, to be in contact with mortar instead of cement C White porcelain Wave (I had forgotten to say that the porcelain glue cement should be non-gray white which is cheaper).

If this is your case, here you do not have a feasible solution with the idea to solve the problem of cleaning porcelain floor, because the problem is still under the enamel.

If you opt for todomasa porcelain paving, where both the glaze and the biscuit paste is porcelain, in this case, it will have less absorption and it is more difficult that you can see the moisture problem below the piece, since there will be less Absorption, though if you have been placed with mortar instead of cola porcelain, by the joints is more than probable.

That the rubber baton used by the Masons tiling to hit the porcelains tiles and that the glue cement expands well by the base of the same, be white because if they use the typical black, remains can be introduced from this Rubber in the micro-pores of the pavement, and we already have another problem if solution, or with a really complicated and expensive cleaning solution that would change the tone of the pavement.

Most of these porcelains tiles are rectified or microbeveled (which have little bevel compared to a normal stoneware floor or tile), this will normally make the seller of the tile shop, especially in elongated pieces, which You can't work more than 15%.

And that they are placed with joints at least 1 mm in size, and if they are quite put in the subject of tiling of porcelain pavements will recommend the leveling kits for pavements that are on the market, and that are being very used today.

The fact of not working more than 15% besides that we avoid eyebrows in the tiles and pavements that are produced by the curvature of the pieces, avoid that when passing over we stumble that the feet that will make us leave more dirt on the pavement.

And the size of the joints, besides for a better placement and finishing of the porcelains platelets, will be used to make the grouting, coating material penetrate perfectly into the joints of the pavement or porcelain tiles.

Grouting the porcelain floor

Here is another important point to consider when you are going to put a porcelain floor, and that will influence the finish of the same, and the cleaning of the rear porcelain floor.

The grouting should be done with specific products already prepared, which are flexible, anti-moisture and anti-mildew, not to be grouted with normal white cement in broth, as this material, which is like They were grouting the pavements before, it has absorption, besides attracting more stains, it attracts moisture from under the pavement, and the joints can be ugly, yellowish and black.

When you do the grouting with this special slurry for porcelain flooring, you must do it with a rubber trowel to expand the product well and penetrate perfectly into the joints of the Racholas porcelains, not using a metal trowel, because Metallic stains can be left to the friction of the galvanized sheet of the metal trowel with the porcelain tile.

And the cleaning of the porcelain floor where the enamel has metallic stripes is very complicated to make and that it is well.

Therefore, it is the usual, but just in case, check as you will do the grouting of the pavement and it is with a rubber trowel.

That do not extend a large surface of grout, especially in times where it is hot, because it will dry quickly on top of the porcelain, and then it is very difficult to remove properly, leaving the pavement tarnished, and even if we use a Cementdescaling, it won't be perfect.

The normal is to extend 3 or 4 m2 of grout pavement, and then to be prepared when they begin to appreciate that begins to dry to make the cleaning of porcelain floor of the remains of this grout that has been left out of the gasket.

That the cleaning of the grout is not with tow or sisal which is a technique used by many bricklayers to clean the grout that is above the porcelains tiles, this tow, sisal or Esparto, besides that is abrasive and not cleaning with the Perfection that requires the cleaning of polished porcelain floor.

The best is a sponge-based float, that in a bucket of clean water we will wet and drain, so that it does not carry too much water, and when it starts to dry the grout then we pass on it with the same one, and perfectly clean the remainders from grouting outside the Ju NTAs, and it will be the most delicate way to clean the porcelain floor with shine.
The problem of cleaning porcelain flooring is not always the fault of the material.

As we can see by the advice we are giving you on the placement and grouting of porcelains platelets, which can make the finish is not what we want, and that can lead us to think that the porcelain floor we bought is bad quality D.

Or that the seller of the tile shop has deceived us, or that the brand of porcelain tiles is not good, we must take into account how important it is, as we see in this part of the article, the details of a correct tiling, so that the material is perfect Placed and maintain the aesthetics that we liked in the store.

If you are reading this article because you have problems with the cleaning of porcelain floor gloss, you may not fijases in these details, but if you have not already placed it, can help you to be on top and watch that the whole process is done Correct.
Clean porcelain floor After the end of the work

    Seem row have a solution to remove grout from some Encaustictile 2 tiles cleaned. Ask for more info #filasolutions pic.twitter.com/OpkFDdO9Zj

    — Martin Ballard (@ballardmartin9) May 12, 2016

If you have taken into account the above considerations of laying and grouting porcelain stoneware, when we finish the work we will simply use a neutral concentrated detergent for final cleaning of the porcelain pavement, before starting to put Furniture and home furnishings.

The best brand of tile and paving cleaning products is currently the FILA brand, which has a wide variety of specific solutions depending on the type of tile and pavement (normal stoneware, porcelain stoneware, terracotta, natural stone).

Although, there are many other manufacturers, above all we find that many manufacturers of cola cement also offer within their products catalog these cement removers, or descaling cement and general cleaning work, which are also very effective .

If you have been looking for information on the cleaning of porcelain floor, in practically all you have found as a recommended product, neutral concentrated DETERGENT FILACLEANER and I will not take the opposite to the other blogs, because I have tried it, in fact I spend it a couple of times a year for the deep cleaning of the floors of my house, and you notice the difference with products to clean less specific soils.



So if you have just done the reform of masonry, have been on confirming that were followed the advice of placement and tiling, the enamel and the brilliance of the porcelain tile, will be almost perfect, so with using FilaCleaner to clean Work will suffice.

If you see traces of grout cement, empañones in different areas, and ultimately a dirtier porcelain floor of the normal, then you will have to use a more aggressive cleaning agent, in this case a cement descaling acid, which as in the previous case, the Product of Fila Deterdek is the most recognized within the sector.

But we can find other brands, which also have good products.
Eye when using acidic products for the cleaning of the porcelain pavement!!:

First, before proceeding to the cleaning of porcelain floor, is to read the method of use and the technical data of the same, how we apply it and always do a little test in an area that is not going to see, as we are doing the cleaning of the end of work before To place furniture, cupboards and other, we can try in an area that is going to go covered.

In case, the porcelain pavement in question does not react well with the descaling acid, and then creates another problem, instead of solving the problem of cleaning the porcelain pavement.

So we try as indicated by the manufacturer we have to try, and if we see that soil does not give problems, because as we commented there are different types of porcelain, we can use it to do the general cleaning of the house, with this product.

And then proceed to put all the furniture and furnish the house.
Clean porcelains tiles After they have been laid for a while.

If after a while and after following the cleaning councils of the bricklayers, who sold us the porcelain floor and the factory, the polished porcelain flooring that we buy does not look like we think it should look, possibly we have looked in information, about Solutions and tricks for the cleaning of porcelain floor and we have seen different blogs.

In practically all you advise the use of a descaling acid, or a thorough cleaner that removes grease, organic remains, ultimately a deeper cleaning system, but from my point of view, you have to keep an eye on this.

Since after finishing the work, practically all the porcelain pavement has suffered the same exposure to dirt, and therefore the application of these cleaning systems are more effective than after a while since the pavement is placed.

The reason is that after placing the furniture, and spend time living, and living with the platelets porcelains shine there will be areas that will be more punished by use, areas such as kitchen, or lounge, and areas less punished as rooms.

In this case, for the cleaning of porcelain flooring it is advisable to use a different concentration of product to test the thorough cleaning of the porcelain floor.

As it can happen that when cleaning with the same concentration, we have clearer areas and other areas with darker shades, because we will have areas that have more dirt and others with less.

So in this case, it's more complicated to clean up.

The best to avoid this, since the placement be on top of that is done correctly, so that all the platelets porcelains look the same.

How to clean the porcelain floor of the works?

As we are insisting throughout the article, the cleaning of porcelain of remains of work is the most important task for our porcelain floor to look perfect, without stains or lamparones that afeen the brightness of it.

You have tried all the homemade tricks to clean the porcelain pavement like using vinegar diluted with water, or mixing bicarbonate and water to scrub on the pavement, tricks of cleaning of floors that usually work, but in the case of the remains of work (grout, plaster, paint, etc.), of first seem to clean them, but when it dries reappear.

Faced with these stains of remains of work we have to go to specific cleaning products, descaling cement and more aggressive products that eliminate the stains, but as they are more aggressive we have to read well the technical characteristics, as some even They can damage metals such as aluminum or stainless steel.

So eye, if we are going to apply these products near bathroom taps, moldings or aluminum corners used as valances, or any type of ceramic trellis, as they could eat the same.

Within the sector of ceramics, the brand of cleaner products recommended for work is the FILA brand, which practically all ceramic tile manufacturers recommends, as it is the most focused brand is to find the needs of the customer, and Manufacture all cleaning products related to tile tiling.

In the case of persistent remains, and if we have tried with the homemade tricks of cleaning as water with vinegar or water with ammonia it is best to move to specific cleaning products, the desincrustrantes cement, which are the best for final cleaning work .

But with the precaution of first do a test on an area that is not going to see, since in principle should not damage the enamel on which it is applied, because the porcelain enamel is the hardest and toughest, but as there are so many products in the market , and many Chinese porcelain floors on the market, it is best to err on the top of caution.

How is the DETERDEK applied?

•     Dissolve in water heats a proportion of 1/5 of Deterdek, being able to use more concentration if there are areas with more dirt than others.
•     Apply the mixture on the surface to be cleaned and let act on 30 seconds, if they are very concentrated machas, can be used directly and then have a bucket of clean water to remove the same and finish cleaning.
•     Rub with a non-abrasive brush to remove the stains and thus descale the enamel and then rinse with clean water.
•     Then we dry with absorbent paper, and it must have been clean.

Daily cleaning of porcelain floors: do not scrub with Mocho

One of the characteristics of porcelains tiles is that they have very little absorption, which is fine if we drop oil to the ground, some tomato, or foodstuffs that could be absorbed as occurs with natural stone and leave a permanent stain In that type of pavements that are not porcelain.

But this advantage is important, but it helps us to think that if they have little absorption, if every day we scrub them with water will be lamparones of this water to evaporate on top of the piece of porcelain.

Therefore the cleaning of porcelain floor or daily porcelain should not do with Mocho and MOP, the daily cleaning of soil porcelain must be done with mop.

We will use the mop and mop-specific cleaner product for the daily cleaning of the porcelain floors, as it allows us to eliminate dirt, footprints and treads, and will not be tarnished or with traces or fogged or lamparones by evaporation of water On top of the porcelain piece that is not absorbed by it.
Weekly or fortnightly cleaning of porcelain floor: hot water and Mocho

Limpieza de suelo porcelánico brillo: EL GRAN PROBLEMA

Every week or every fortnight depending on the use and the dirt that is the porcelain pavement we will proceed to a depth cleaning.

The best for the cleaning of porcelain floor is to choose the day where fewer people are at home, or that Siimplemente no one will tread on top, as the drying time of the water is greater than in normal stoneware floors.

Then we'll get hot water in a bucket, concentrated detergent, not a lot of it, so that there are no traces of this detergent on top of the indoor floorings soils and we'll scrub with Mocho.

Let dry, which as we commented on the drying time is greater than in other types of soils, and we will give a review with MOP and MOP cleaner product to remove all the mists for the rest of water, and porcelains platelets will be impeccable.
Clean specific stains on porcelain pavement or pavement joints

If we dropped a product such as coffee, a cola product, or mud stains, and we do not plan to clean all the porcelain floor, as if we want to clean the joints porcelains, a product that I have tested and works perfect, is the gasket cleaner of a row.

It is not an acid product so it does not damage the enamel or the joints, and has surfactants that get a great cleaning, you can try it and discuss how.

Specialist In Floor Installation: How To Clean Ceramic Floor

Specialist In Floor Installation: How To Clean Ceramic Floor

 To clean ceramic floor can be a frustrating task due to the difference of matter that the tile is made and the unglazed grout. Ceramic floors add value to the house, usually found in bathrooms, hallways and kitchens. It is the same as all plants, require cleaning periodically and cleaning a ceramic floor is not the same as cleaning of a vinyl or wooden floor. What makes it difficult is that the tile is glass, but the grout is made of cement mortar between the tiles, not glazed that is stained or dirty much easier than the tile. Although Grout may have an insulator applied, it is still not as durable and resistant to stains and dirt as ceramic tile. If the nozzle is dirty the whole floor looks dirty.

Grout Cleaner Product

Then, How to clean it?


There are many household cleaning products available to do the job, however none of them do a much better job than white vinegar and warm water.

Vinegar is A mild blend of tartanic amd citric acids. A large cleaning solvent is made when mixed with lukewarm water. For cleaning the grout, mix 50% water, 50% White vinegar and apply to the grout with a sponge. Let me act for a few minutes and scrub the grout with a toothbrush. A second application may be necessary if the grout is heavily stained. Use the sponge to absorb debris and clean the floor with a mild detergent.



The same vinegar and water solution can be used to clean the stains on the ceramic tile. Use a sponge to clean the entire floor and another sponge to dry. Because vinegar is an acid that removes any grout sealant it will have to re-seal the grout with a small brush. Apply two sealant applications, leave completely dry between applications. Grout Sealant is available at most home supply centers or a tile store for your convenience.

To protect your hands I recommend that you wear rubber gloves for handling vinegar solution and apply grout sealant. It is not necessary to use an electrical machine to or polish the ceramic floors. Excessive use of this machine can remove the enamel from the tiles leaving it with a matte finish. I do not recommend using Clorox to clean the ceramic floors, as it tends to yellow the mosaic and erode the grout.

The importance of grout in swimming pools

The importance of grout in swimming pools

All the swimming pools need a proper maintenance, to enjoy them to the maximum.

A point that should take special care the owner of a pool, is the grout in the Llagueado existing among the gresites that comprise the lining of the vessel.

Grout Cleaner Product

It can be easily observed when between the gresites there are areas without the waterproof white gasket that binds them, seeing black lines, which do not have to be dirt, but the black cement on the back of the vitreous coating.

When we have a pool with lack of grout can appear algae more permanently among the gresites, because they have a place to shelter and become strong, despite giving doses of disinfectant shock or anti algae strong.

It can also be the case that for lack of grout some of the live edges of the gresites can cause cuts to the swimmers, so it is highly recommended that always be in optimal conditions.

antes-despues de lechadaAesthetically it is very nice to see a pool with the grout in perfect condition.

Approximately every 4 or 5 years it is advisable to empty the glass of the pool, to proceed to a thorough cleaning with Hydrocleaner and some disinfectant and descaling product, that helps to lift some of the cement that there are Among the gresites.

In this way when we apply the new grout will take much better, because in areas where there is already grout, the new jump naturally when not having base.

The White gasket must be special for swimming pools, as it will be in contact with water, chemicals and even salt, if in our wastewater treatment plant has a saline chlorinatordisinfection. All without forgetting the effect of the sun.

Antes y despues de lechadaThe material of the gasket must be frost resistant, it should harden when dry, without cracking and it is advisable to be ductile and workable to make your application is the most correct.

Having a grout in condition makes it easier to clean the glass, as well as repel some of the water and help the glass waterproof. This is not to say that the grout is the one that makes a pool stagnant, but if it helps.

This type of work has to be done by companies specialized in swimming pools to guarantee a correct application of a professional product and a longer duration than with other products. They will also give us some guarantees in case it is detached by a problem, shortly after having done so.

QUICK GASKET REMOVAL: Electric GASKET scraper RUBISCRAPER

QUICK GASKET REMOVAL: Electric GASKET scraper RUBISCRAPER

Many times we want to remove the joints from the tiles, either because the gasket is old or dirty and we want to change it or because we want to change all the tiles.
As we know, there is no miraculous product that eliminates the joints without work or soften to eliminate them effortlessly. The only way is to eliminate them Rascándolas patiently until the board is completely eliminated.

Grout Cleaner Product

Until today most of the time the elimination of the joints has been done manually, using Cúters, scrapers, etc. or sometimes with power tools which have not finished ever working perfectly, as they were not very Effective and often damaged tile.
Innovation in electric gasket scrapers...

Now, RUBI® has designed the perfect power tool for removing all kinds of joints, the RUBISCRAPER, electric scraper with frontal oscillation for perfect removal of the gasket without damaging the tile.

With this tool we put an end to the manual removal of joints, because with the new RUBI gasket scraper We avoid investing unnecessary effort and time. This new RUBI tool will allow us to work in a faster , more efficient and clean way.

RUBISCRAPER FEATURES AND BENEFITS

The new professional Electric gasket scraper RUBISCRAPER-250, offers an effective solution to the costly removal/emptying of cementosas joints between tiles.
Rubiscraper-250, offers a great number of very important advantages:

•     Minimizes the risk of damaging tile or tiles during the process of removing cement-based placement joints.
•     Front oscillation of the tool. Thanks to this way of working we get more precision and control.
•     Thanks to the design of its blade, we get a greater adaptation to the cement board. As a result you can remove more material from a single pass.
•     Unlike friction tools, Rubiscraper 250 does not generate dust. Larger particles are generated, reducing the risk of inhaling small dust particles.

Nuestra ferreteria profesional online
Your RUBI work tools in our professional online hardware store

Other features of the Rubiscraper are:

•     Easy and intuitive use.
•     The design of the RUBISCRAPER-250 ensures perfect ergonomics during use, since it is not necessary to turn the tool, allowing the user to always work in the same position.
•     Fast tool lock/unlock system. Easy to assemble the blade.
•     Tool teeth are resharpenable tungsten carbide. Offer higher performance.
•     By means of the different blades we can adjust according to the width of the joints.
•     The front tooth steers as the back tooth starts the material. The front tooth is used to start the joints of the corners and encounters.
•     Adjustableworking speed. 3 Positions (V1:6000/V2:8000/V3:9500 I.P.M.)
•     Light (1.3 kg) and resistant. Maximum Reliability.
•     Double insulation. Increased engine protection.

How to remove excessive grout from ceramic tile

How to remove excessive grout from ceramic tile

Masonry of a ceramic tile floor is a dirty job. After you have completely filled the grout, there will be plenty of grout left on top of the tiles. This excess grouting early in the cleaning process will save you from the strenuous cleaning work of the dry slurry.

Grout Cleaner Product

Instructions

• Tilt the rubber float for an angle of 45 degrees. Pass the float on the ground at this angle. It always works diagonally through the tiles as removing excess grout. The grout excess replace the mixed slurry cube.

• Wait for the grout to harden for approximately 20 to 30 minutes. This allows the grout to heal a little before you clean with the grout sponge.

• Fill a bucket with water. Place the grout sponge in the water and then the ring out of the sponge until it is slightly moist. You don't want to introduce a lot of extra water into the grout at this curing stage or they may weaken.

• Wipe the top of the tiles with the grout sponge. Once again, be careful not to remove grout from the tiling joints as it is removed from the top of the tiles. Rinse the sponge in the water bucket frequently.

• Wait for Grout to harden completely, approximately 24 hours. When the cement has hardened there will still be a slight mist of grout at the top of the tiles. Use a dry cloth to "polish" the top of the tiles and remove the opacity.

How to remove grout from a shower floor

How to remove grout from a shower floor

It is the cement-like substance found between the tiles on the shower floor and other areas. It is usually the first part of the tile area to need repair or replacement, as it may break or corrode over time. If you want to go back to your grout shower floor, existing grout has to come in the first place, which can be a difficult and time-consuming job. Tools are available but dramatically increase the chances of damaging the tiles. You are better off with a grout saw, which is a square, carbide tipped blade on a handle.

Grout Cleaner Product

Instructions

• Get the floor very dry. Let stand at least 48 hours.

• Scrape saw your grout along the grout line which is the most damaged or corroded and comes out in the easiest way. Remove by pushing and pulling the blade over the surface while applying firm pressure downward. Like surface material breaks, work the blade down along with the tiles and grout.

• Pump away dirt with the hand vac.

• Work the way along the other grout lines with the grout saw, scraping and digging in the same manner. Be careful not to scratch the tiles. It will stop after every few tiles to the emptiness until the ruin.

• Remove all grout that needs to be removed. Return to the lines with a razor to remove any pieces that do not come with the grout saw.

Tips and warnings

•     Shower floors with grout removed are very vulnerable to damage. Any direct moisture at all, or even the indirect moisture of a wet bath, can work its way into exposed parts of the tiles and cause it to loosen. Be ready to return the grout to the floor quickly after the grout is removed and do not shower it until it.
•     Wear eye protection at all times while removing grout.

How to remove grout drying ceramic tile?

How to remove grout drying ceramic tile?

Grout is a mudlike product used to fill the spaces between tiles. While wet, it is malleable and easy to work, and spills are a children's game to clean. However, expert remodeling house Tim Carter points out that many people do not realize the grout is made in part of Portland cement--and dry cement is a challenge to remove from any surface. Clean grout spills as soon as possible to prevent a difficult cleaning project after the product has dried.

Grout Cleaner Product

Instructions

• Mist unwanted grout with water from a spray bottle. Keep it moist while working for easier removal.

• Scrape large pieces of grout with a plastic scraper. Work carefully to avoid scratching the tile surface.

• Sweep or vacuum clean scrapes like you. Wet grout may adhere to a new tile section, causing the same portions of grout to be removed again and again.

• Wipe tiles with a sponge and clean water after removing all larger bits by scraping.

• Scrub the rest of the grout with fine steel wool or warm water and scrub pad. Clean the dry surface with a clean cloth while working so you can clearly see any remaining grout. Apply light pressure while scrubbing and working slowly to avoid scraping or damaging your ceramic.

• Wipe the tiles with clean water and a sponge. Dry with a clean, soft cloth.

Tips and warnings

•     Avoid the need to clean excessive grout in your next tile project by treating your tiles with a grout-product version. A release grouting agent is applied after the tile is placed and the lines are filled before grouting. The release forms a temporary seal on the tile and prevents grout from adhering. It is washed with water during the normal grout cleaning process.
•     Remove tile opacity just installed by polishing with a towel or chamois cloth.
•     Sand grout is typically used in tiles and especially rough on the hands. Use domestic rubber gloves clean grout with sand.
•     Grout-Commercial removal of products are available at most hardware stores; However, these products contain acid that may stain the tile or affect its color. If you want to use a grout removal product, try first in a discreet corner to see how it affects your tile.

How to remove grout and tile sealant

How to remove grout and tile sealant

The tile is a durable and attractive addition for any home. Over time, however, grout lines can be stained or dirty, causing old and worn tile. Removing the grout and tile sealant will allow you to return to the tiling of the tile and start over. The right information will help you get started.

Grout Cleaner Product

Instructions

• Clean the tiles with water and a clean cloth.

• Break apart from grout with a saw carbide tipped nozzle. Be careful with grout see how the surrounding tiles can be easily damaged. Scrape all grout between tiles. If the grout saw is not doing a good job, use a flathead screwdriver and hammer to undercut the grout.

• Zone bomb. Tile must be clean and free of any dust or grout residue.

• Apply acetone to a small sponge. Carefully check the acetone on a tile that is at an imperceptible point to check for a possible reaction to the surface of the tile. If there is no reaction, apply the acetone to the top of the tiles to remove the tile sealant.

• Rinse the tiles with water.

• Mix the grout as indicated by the manufacturer. Apply to grout joints with a rubber trowel. Squeeze grout into grout joints so they are fully filled. Clean the extra nozzle with a large sponge that has rounded corners. Allow Grout 24 to 48 hours to dry.

How to remove dry grout on tile surface

How to remove dry grout on tile surface

It is a bonding agent between tiles to keep them together during installation. Most grout contains Portland cement, which takes several days to fully establish. Although it is recommended that grout be applied carefully so that it is not on the tile, it will inevitably happen. Grout that is not cleaned off will immediately dry more difficult as time passes. Carefully washing the tile as soon as possible with metal tools is not an effective method of eliminating excessive grouting and storing the chip.

Grout Cleaner Product

Instructions

• Purchase wood grout sticks or use oak wood pieces that are approximately 1/4 inch thick by 1 inch wide by 6 inches long. Oak is preferred as it will hold a more edge of softwoods. Make sure the edge is square-cut and not rounded.

• Insert a small amount of water over the grout excess and scrape it with the wooden stick to remove large lumps. Clean grout particles from tiles with water and a soft towel.

Add water to the clean tile and rub the area with a nylon scouring pad. Add water to the area to prevent drying while scrubbing. Rinse the tile to remove residue and dry with a soft towel to see progress.

• Continue scrubbing the area with a wet nylon acidification pad until desired results are achieved.

• Mix one gallon of water with a cup of sugar and apply in areas where opacity does not disappear. Soak the area and let it harden for two hours. Rub with a pad after two hours of nylon and rinse with water. Repeat this step if necessary to remove grout. Dry the tile to check the amount of grout remaining.

Repair the grout line between the tiles by dipping a little. Use sandpaper around the corner of one of the chopsticks and use to push and pull back and forth over the existing grout line. Use water as a lubricant to work the grout in the desired appearance.

Tips and warnings

•     Do not use metallic tools or metal base scouring pads to scrape grout as this may damage the tile and natural finish.
•     Hold a piece of replacement tile next to the tile cleaned to check for grout Haze still present.

How to remove grout with a ZIP tool

How to remove grout with a ZIP tool

Dirty old grout ruins the appearance of the tiles in kitchens or bathrooms. In addition, not every owner applies to grout properly, resulting in an imperfect look. Because it is not easy to remove grout, zip tools come in handy. Zip tools are high speed mills that reduce the amount of elbow fat you need to scrape out of the grout.

Grout Cleaner Product

Instructions

• Lay a plastic sheet on the floor to catch grout flies. Place the correct bit from the zipper tool to remove grout between tiles.

• Plug into the electric zip tool and follow the grout line by pressing down. Keep hands away from the blade as you are removing grout. Having a friend will point you if you are going to remove grout from a ladder. Steady his arm bending against a wall.

• Dust Rag and grout bits with a towel. Press a carbide scraper against any existing grout.

• Remove any remaining piece of grout with a hammer and chisel. Hold the chisel in the nozzle at an angle of 45 degrees and the top of the hammer.

• Spray a rag with household cleaner. Clean the dust on the tile. Make sure the tile is completely dry before applying grout more.

Tips and warnings

•     Wear protective goggles and a mask when removing grout.

What tool is used to remove grout?

What tool is used to remove grout?

Eliminating Grout is a special, small-scale demolition project that requires specialized tools. Because tiles should remain in place during grout removal, a slip can only break a tile or break its enamel. To avoid damaging the surrounding surfaces during grout removal, grout strip professionals with power tools and manual specific task tools. Grout removal equipment is available in the average home improvement store and, with the right set of tools, you can replace your grout without sacrificing your tile.

Grout Cleaner Product

Chisel and Mallet

Almost any chisel will cut the grout as long the tip fits into the grout line. However, using sharp chisels to remove grout, such as wood chisels, will simply ruin the chisel edge. Chisel of a narrow mason and a hammer effectively pulls grout from a tiled surface. On the other hand, many builders use a flat head screwdriver to remove the grout in a pinch. Although a hammer may be replaced by a hammer, metal-headed hammers tend to chisel butts to warp and break screwdriver handles.

Carbide Grout Remover, brushes

The carbide-tipped grout remover, also called a grout removal tool, is similar to a knife with an offset, protruding blade. Unlike the half-blade, the grout removal Tool has grit-carbide-coated abrasives. To use a grout removal tool, you simply rub the tool's abrasive sheet along a grout line. The blade scrapes, pulls and removes grout. Grout removal tools are often used in conjunction with hard bristle brushes. While the grout removal tool removes most of the grout, the wire brush eliminates residual bits and grout bits.

Manual Rotary Tools

Portable rotary tools are similar sized power tools in shape to a dentist's drill. Hand rotating tools rotate a variety of attachment cutting, drilling and grinding, including attachments remove specially designed grout. Grout Removal Tool fits directly into the thin space between adjacent tiles and quickly turns to grind the grout away without damaging the tiles. Portable rotary tools offer an effective method of eliminating grout from thin grout lines, in corners and areas that are difficult to access.

Grinders and circular saws

For large projects involving thick grout lines, tile workers often use angular grinders or circular saws to remove grout. Equipped with masonry knives, standard angle grinders and circular saws are able to remove grout from grout lines. Sets the depth of the cutting tool to a grouting dimension without damaging the tiled surface substrate and running the tool blade that rotates through the grout line.

How to remove grout and adhesive from tiles

How to remove grout and adhesive from tiles

Balance the joints between stained tiles will certainly clean an unsightly surface tile, but it is a long process. If strong dilutions of Lye won't do the trick, however, you will have to resort to scraping the grout or glue between joints and balance. If you are going to remove the tile altogether and want to remove the adhesive and grout from each tile, you need a sharp razor and a little patience.

Grout Cleaner Product

Instructions

Joint balancing

• Scrape in the areas between the tiles with a grout to remove the tool with a tungsten-tipped blade. Wear gloves and safety goggles to avoid injury to the tool or to fly loose debris. Do not use excessive force; You can scratch the mosaic you're trying to rejuvenate.

• Clean the bits of grout, adhesive and dust from your work area with a clean, dry brush. If a large area is arranged, make sure it is well ventilated to remove dust and use a mask to protect against fine particulate inhalation.

• Remove any mold from stains with a 10 percent bleach solution before joint balancing. Wear rubber gloves when handling bleach.

Remove Tiles

• Weaken from tiles with a hammer and chisel so that the tile will wiggle slightly. Insert a thick, sticky knife under the tile and move back and forth to loosen grout. Use the knife to lift the first shingle as if it were a lever. If it doesn't look seethe, try to scrape and ripple more behind the shingle, but don't force the tile away too hard; The knife could bend or break.

• Work methodically through the tiled surface, with the edges freed from the removal of the first tile as a starting point.

• Scrape grout and adhesive from sides and back of tiles with a scalpel or sharp knife tool. Always scrape away from your body to avoid injury when the razor suddenly gives as a piece of grout or adhesive comes loose.

• Apply Muriatic acid to the back of the tiles to loosen grout or glue. Wear gloves and goggles and apply only to the stubborn grout piece with a rag dampened with muriatic acid to be pulled, as the acid will inevitably eat the rag. Cover nearby surfaces with thick plastic. Allow the acid to work in the grout for about 20 minutes and then scrape with the razor. Rinse thoroughly with water and then with a base solution--one part sodium bicarbonate by four parts water works well--to avoid long-term damage to acid tiles.

How to remove the grout and adhesive

How to remove the grout and adhesive

A large part of the remodeling of a tiled wall is to remove grout and glue used to adhere the tile in place and allow the movement of individual tiles without breakage. Retirement is a simple process but it takes a lot of time, and you should use the right tools and materials. Once you have finished, however, your tiled surface above will be clean and transparent, ready for any use you choose.

Grout Cleaner Product

Instructions

• Place a collection cloth around the tiled surface to protect against dust. Use adhesive tape to secure the fabric.

• No Goggles and a mask to protect your eyes and the dust's lungs kicked upward while grout and glue are removed.

• Remove grout between tiles using a rocking tool with a grouted carbide blade. Run the vibrating foil over the grout between the tile joints. As the blade moves over the grout pulls the grout from the gaskets, to the glue holding the shingles in place.

• Remove the tiles using a lever. Place the lever on the edge of each tile and apply pressure, lift the edge. As the edge is raised, move the lever farther under the tile, exerting pressure until the tile comes out.

• Remove the glue from the surface using a sustained carbide nozzle blade at an angle of 45 degrees. Push the blade along the tail, cutting the surface. This will eliminate most of the glue.

• Use an orbital sander to remove adhesive residue from the surface. Pass the sander in small circles over the glue, grind it and leaving the surface smooth.

Tips and warnings

•     Always keep the orbital sander moving. Hold in place for any amount of sand time thanks to the tail and remove a layer from the surface below.

How to clean the gasket and tiles

How to clean the gasket and tiles

"Wow, you could eat on those floors."

Does the previous phrase explain your tile floors at home? We didn't think so...

Tile floors are excellent due to their durability and relative ease of cleaning and maintenance. But it's the grout between the tiles you really have to worry about. Want to know how to clean the dirty grout to get clean, shiny lines between your tiles? Well, pull up your sleeves. It's time to get down to work.

Grout Cleaner Product

You may also be interested in:

• How to properly clean wood floors

What you need:

•     Vacuum cleaner/room and powder tray
•     Tile and Grout Cleaner (acid-based cleaner for soap buildup such as Scrub Free® or Scrubbing Bubbles®)
•     Scrubbing Sponge
•     Grout Brush (an old toothbrush works well)

What you have to do:

•     Remove all shower/bath items
•     Remove all tile floor items
•     Vacuum/sweep Tile floor
•     Apply abundant tile and grout cleaner, use the sponge to spread evenly.
•     Let The Cleaner rest for 5 to 10 minutes to start working.
•     Rub the tile with the scrubbing sponge. By then, the Cleaner has already had time to loosen the dirt, which makes cleaning easier.
•     Use the grout brush (or old toothbrush) between the tiles.
•     Rinse and dry with a clean towel.

How to give color back to a faded forge in tile

How to give color back to a faded forge in tile

How to solve problems with the forging, grouting or slurry on your floors or walls

Home Improvement projects transform the appearance of your kitchens and bathrooms faster than cleaning the discolored mortar or forge. Generally, a good scrubbing is all you need to do to remove the discoloration of the forge, but you may also need to remove and replace cracked and damaged areas, depending on the current state of the forge in your kitchen or bathroom.

Grout Cleaner Product

Combat the discoloration of the forge from day one

Of course, the easiest way to clean nozzles begins the day you install your tile. If you are diligent in cleaning your tile floors and other surfaces, and are meticulous in cleaning the grout or forge as often as you clean your tile or tile, it will be a long time before you see any discolored grout in first Luga A. Most discoloration of grout or forge is caused by particles of oil, food and debris remaining in the grout and forge and then ground on the surface over time.

If you never have a chance to forge first, you will be admiring your shiny and clean grout for years before you need to take action. On the other hand, it is easy to let the cement grout slip, and often problems accumulate without us noticing until it is too late. In these cases, it is time to book an afternoon (or a weekend, depending on the magnitude of your problem) to dispatch that colorless mouthpiece filler.

Do you need to hire personnel for your company or officiate in outsourcing mode? Take a look at our outsourcing Service.

Cleaning of Forgings 101

The discolored mouthpiece is a sturdy material, so be prepared to get your hands dirty. For basic nozzle cleaning, your best choice is to find a strong degreaser and a stiff nylon brush (many people recommend toothbrushes for this dirty work). Apply Degreaser, let stand and then start scrubbing with a brush. Most stains, oils, food particles, mold and fungi are eliminated through this simple process.

You may also be interested in:

How to clean wood floors

You can also use chlorine-based cleaners, vinegar and baking soda solutions, if you prefer something with less chemical makeup, although none are as proven as a good degreaser. Never use oil-based soaps to clean the grout, even for regular cleaning, as the wax they contain will accumulate and stain the grout over time. If you simply cannot clean the grout, forge or mortar, you can use a steam cleaner to help. Steam will remove stains from grout where they can be cleaned easily.

Cleaning of Forgings 201

If the standard cleaning procedures mentioned above do not deal with your discolored grout, you will have to do a more extensive job. In addition, there will inevitably be places where your grout has cracked or chipped, and need to be refilled and replaced.

In any case, you will need to buy a special tool to remove grout, remove the old one and put the new. It can be meticulous work. In fact, many owners choose to hire specialists in cleaning and repairing nozzles to take care of their discolored mouthpiece for this reason. But, it can certainly be done by a persistent and patient homeowner, and the results of the grouting are staggering. Once you're done, those dirty old tile floors look like new.

Whether you decide to do it yourself or hire a professional, overcoming the discoloration of the mouthpiece is one of the easiest ways to dramatically improve the appearance of your floors, countertops, splashes and tile walls.

Are you ready to hire domestic help? Take a look at our domestic Staff placement service.

How to grout pools

How to grout pools

Pool Grout: What it is, what it's for and how it's applied

For grouting a pool, take special care with the material to be used. Not all types of cements are suitable for pooling, so you have to study well the best options and thus get a beautiful pool, durable and algae-free.

Grout Cleaner Product

It is difficult to imagine a pool with a tile surface that is not properly grouted. To cover the joints of the tiles gives them greater grip, resistance and durability. In addition, the

Endows with beauty and gives them a uniform and balanced appearance. In this article we will talk about pool grout and how to use them.

What is the pool grout?

It is to cover each of the joints or separation of the tiles

s once they are installed. This is a compulsory procedure when installing tiles or tile in any place of the house, and if it is in a pool its level of obligation and importance increase exponentially. A good pool grout (as it is also known) depends on its durability.

Why is swimming pool so important?

It happens that to coat a pool is usually used tiles or GRE

Site. Both materials are durable and ideal for swimming pool coating, but when installing the plates on the surface you must leave a gap between them about approximately 2 millimeters.

Through that seemingly tiny and negligible separation you can filter the water, you can peel off the tile or tile and, also, you can fill the pool with algae.

That's why pool grout is very important. By covering that gap between one tile and the other, you can make the pool liner waterproof – thereby avoiding water seepage-, making the tiles more grippy and thus lasting longer.
What materials can be used for to pool grout?

There are various materials for pool grouting, but there are more functional ones than others. If you select the most suitable material, you will have half of the work done.

White glue cement can be used for grouting. This is because it is easy to expand by the surface of the pool. However, this cement does not have the necessary properties for use in areas with such a presence of water, so if you use it for grouting, surely over the months will start to fall and thus damage the aesthetic aspect of the pool.

Why is that? The white cement does not withstand the water pressure, so in a short time will yield and fall. This can, in turn, cause the tile to peel off, forcing the fallen plates to replace and make a new grout.

However, there is a pool material created from white cement. It is a special composition of white cement, epoxy resin, marble powder and other components that give it the necessary characteristics for grouting.

However, the ideal materials for this work are the special mortars for joints. These mortars are manufactured to withstand the pressure of water and chemicals used when cleaning the pool. They are durable, waterproof and prevent the proliferation of microorganisms.

Of course, mortars are more resistant than others, but most have the same characteristics; Resistance, fast drying, grip and functionality.

Grouts can be used in all types of swimming pools and are, in fact, the most used at the time of grouting.

How do I prepare the mortar for joints?

It depends on the manufacturer. There are many brands of grout mortars. However, their method of preparation is-almost always-similar.

Add water and a bit of the mortar to a container to prepare the joint mortar. It should be mixed until it has a homogeneous consistency and no lumps. Once you are ready, you can proceed to grout the pool.

How to Pool?

Pool grouting is a simple job but requires a lot of care and, above all, experience. The first thing to do is to select the suitable material or pool; A mortar for joints. Then proceed as follows:

1-Clean the pool surface: Before you start grouting, clean the pool to remove any traces of dust, grease or any dirt you may have. To do this you can use cleaning products for swimming pools. It should also be taken care that the surface is dry, so that the grouting has better results.

2-Apply the mortar for joints: When the pool is completely clean and dry, the mortar mixture is made and applied using a rubber trowel.

The mortar should be extended, with the help of the rubber trowel, by the surface of the pool, taking care that the joints are completely filled and without gaps.

3-Let the mixture dry: Let the mixture dry for approximately half an hour. Ideally, do not dry completely to remove excess mortar from the surface.

When the joint mortar is a bit dry, the mixture that has been left with a squeegee or any other similar appliance is removed. This should be done with diagonal movements so as not to remove the mixture from the joints. 

4-Clean the surface: Once the excess mortar has been removed for joints, clean the area with a damp sponge. This should be done with diagonal or circular movements in the same direction as the hands of the clock. Then the grout area must be completely dried.

5-Remove the remaining mortar for joints: When the surface is completely dry, the remaining mortar must be cleaned with a dry tissue until the area is free of dust and mortar residue.

Recommendations

• -Always seek the help of professionals.
• -Use the special mortar for grouting to last longer.
• -When assembling the pool, start on the floor. So you won't get any mortar residue on the joints when you're grouting the wall.
• -Work by zones, this way you avoid that the mortar dries before you can start to remove it.
• -If your pool has already been grouted, you must remove and clean the areas where the grout has fallen.

If you take these procedures into account, your pool grout will be firm, uniform, beautiful and will last you for a long time.

How to clean: Dirt and Grime - Mosaics and Grout

How to clean: Dirt and Grime - Mosaics and Grout

Technical porcelain floors, always impeccable and as the first day

Designed to meet the highest standards of architecture and interior design professionals, Urbatek's technical porcelain stoneware is homogeneous, uniform, ultra-durable and easy to maintain. In addition to high-rise interior projects, the technical ceramic range of the company of PORCELANOSA Grupo is designed for projects in which there is heavy traffic, as well as for those who are subject to withstand sudden changes in temperature Or inclement weather, as is the case with exterior claddings .

Grout Cleaner Product

Its versatility knows no limits, nor its technical performance and quality, which make it always ready and as the first day, until after being subjected to extreme circumstances. So much so that even in its most delicate finishes, like the polished ones, the technical porcelain Urbatek stays perfect and with the brightness that characterizes it, day after day.

Without a doubt, one of the technical qualities that make professionals choose the technical porcelain stoneware for their architecture and interior design projects is its low absorption and easy cleaning. The most annoying stains can quickly disappear if proper maintenance and cleaning tips are followed, depending on the type of stain and the weather that has been exposed to the ceramic surface.

In the first instance, technical ceramics should be cleaned using only neutral soap or surfactant soap and clean water. In cases of minor oil or fat stains, the cleaning material to be applied should be a solution of ammonia, while in the most persistent stains, it should be acted upon with more special products, such as Degreaser Commercial or alkaline detergents.

In relation to more specific stains, chromium oxide, iodine, cooking oil, soda or coffee, the Protocol of action varies according to the time of exposure of the stain. If the stain is recent, only clean water should be applied to ensure infallible cleaning. On the other hand, if the stain takes about 24h, water and alkaline cleaner should be applied.

With all these basic cleaning tips, plus the performance and high quality of Porcelanosa's technical porcelain stoneware, the pavements will always be clean and shiny in any project.

How long should I let the grout dry before cleaning

How long should I let the grout dry before cleaning

Today I bring one more of our DIY tricks. With this simple DIY trick I present the answer to know how long you should let the mortar dry. No special tools or additional materials.

Hello everyone!

Grouting is the last step in the whole process of laying tiles, but it is a very important point and we should not overlook.

Grout Cleaner Product

First of all they have a decorative function; We can choose the color and texture of the joints depending on the tiles we place, their color, their format, whether they are ground or wall, in short, our particular taste. But what is the most important function? The placement joints have very important mechanical functions that will ensure that our installation does not vary over time; They absorb the movements of compression and traction, let the vapor from the ground or the wall pass and absorb the dimensional varieties of the tiles.

Now, this is not a very daily task in hacker, so I present one of the DIY tricks that will show you when the time has come to clean the excesses and remnants of mortar joints. Once we have made the placement of the tiles and we applied the mortar for joints, we want to see the end result, we just have to clean the area of the mortar remains, but then we are asked a question: When should I clean the remains of the mortar For meetings?

Right after placing it or should I let it dry completely?

This is usually the most common question when someone who is not accustomed to working with this material is done when it comes time to rejoin. So, we leave a simple DIY trick to know if we can clean and finish our work.

All we need is to have properly applied the grout and a simple finger.

Usually the manufacturers of mortars of joints recommend to let dry about 20 minutes, but if we lose the notion of time, this simple DIY trick will allow us not to have to be pending the clock.

With just touching the fingertip of our finger the board will know that:

We CANNOT clean it if we notice it tender and the finger becomes dirty with scraps of gasket.

IF we can clean it if we notice it tender and the finger is completely clean of gasket.

I hope I've helped you. See you next time!