Tuesday, May 7, 2019

How to clean ceramic joints for very little money

How to clean ceramic joints for very little money

The ceramic floors of kitchens, bathrooms and tiles deteriorate considerably with the passage of time. Above all, the tiles ' joints darken and give a pretty bad and dirty picture of the stay still being clean.

The specific products to treat these ceramic joints are exorbitantly priced, dondan the 4-5 euros 100 ml boats, we have several very simple home solutions to carry out their cleaning or repair.

Grout Cleaner Product


If these joints are only dirty and blackened, simply pass the mop or cloth through the joints using strong water (or dilute hydrochloric acid that is the same) without any detergent. The result is unbeatable.

However, if the grout has been lost and the hole in the gasket is noticed, instead of using any gasket repair or the like, it is better that we do the same procedure that is done to prime those joints.

We buy four or five kilos of white cement in any building materials store or large area that has this product.

Dissolve in about three litres of water the white cement stirring at the same time until a paste solution remains, but liquid enough to obtain it. The amount of water is indicative.

Let it rest a little until it has a semi-liquid texture. Before spreading the solution on the floor, we thoroughly scrub the floor or the wall.

We extend the solution with a brush for all the joints. If we want to give it color, just add dye for clothes, the same color as the tiles or tiles.

We wait about fifteen – twenty minutes until the solution has dried. A light layer of white cement is formed by all the areas we have impregnated.

To remove the cement residue, use a large-fiber scouring pad or spatula. It comes out very easily and the results are the same as the first day. After these treatments, your bathroom or kitchen will be as new for very little money.

HOW TO CLEAN AND SEAL TILE GROUT

HOW TO CLEAN AND SEAL TILE GROUT

Tools


  •     Grout Cleaner
  •     Grout Sealant

Materials

  •     Grout Cleaning Brush
  •     Sealant Brush or applicator
  •     Chemical-resistant Gloves
  •     Splash-resistant goggles

What you should know before buying products to clean the grout

  •     Make sure the grout has no cracks or loose fragments. For tips on how to repair grouts and tiles, look for the link to the tile replacement article.
  •     Some cleaners and sealants may be powerful enough to require special precautions. If you don't have protective equipment, invest in buying splash-proof goggles, chemical-resistant waterproof gloves and a respiratory filter (not enough with a paper mask).
  •     This job does not require special skills, but it does require patience, so upload new songs to your MP3 player, buy a pair of knee pads to work on the tile floor and spend the time needed for this work.
  •     If your grout is new and has had several days to harden, ignore the cleaning step — or clean only where necessary — and go straight to the section on sealing the grout.
  •     Allows enough ventilation for odors to come out of the cleaner and sealant.
  •     Some commercial cleaners and bleach mixes can damage fabrics, so don't use your best pants for this project.

Grout Cleaner Product



Cleans Dirty grout

Step 1

Clean the entire floor normally and collect any loose dirt and dust. If the grout has an old, worn coat of grout sealant that still allows water to accumulate, use a floor finish stripper to remove the sealant from the surface. Rinse the floor with clean water and let it dry.

Step 2

Apply a commercial-grade grout cleaner according to the manufacturer's instructions and start scrubbing with a nylon bristled brush or old toothbrush. Work in small areas and rinse the cleaner thoroughly from the floor before proceeding to another section.

    It's good to know: You need to remove the mold before you work on the stains that left the mold. Wear your gloves and eye protection and apply a mixture of ¾ cup of bleach to a gallon of water on the mold patches. Let the mixture work for half an hour before rinsing with clean water.

Step 3

To review the result, compare the sections you have cleaned with grout in low-traffic or protected areas. Stains often come from different sources, so not all stains react the same to a cleaner. If you have tried a method that did not work well, try another, like rubbing with concentrated white vinegar. Let the vinegar solution penetrate into the grout for about 15 minutes and then rinse with plenty of cold water to neutralize the vinegar acid.

    It's good to know: Grout Cleaning can be a frustrating experience when it is not completely clean after the first try, but you must resist the temptation to use super-powerful cleaners. Muriatic acid, for example, can remove stains but will also damage grout.

Step 4

When you are satisfied with the cleaning result, flush the floor once more with clean water buckets to remove or neutralize any cleaner residue.

We all like to finish soon, but if you hurry to finish the cleaning phase during this project and begin to seal the grout ahead of time, you can turn a problem that has solution in a permanent problem because, in addition to sealing the grout , you'll also seal the stains.

Seal grout

Step 1

The trick to applying sealant is to cover only the grout, so use the broader brush or applicator that covers the grout without the sealant falling on the adjacent tiles. When the tiles are completely dry after cleaning, test the sealant on a few lines of grout in a partially hidden area until you feel comfortable applying it.

Step 2

Follow the manufacturer's instructions and plan your work to avoid walking on the grout sealer before it is dry. Do not skimp, apply all the sealant that the grout can absorb, but do not allow it to accumulate on the surface. Once the first application dries, apply a second coat if necessary.

    It is good to know: Now, if you were never able to color without leaving the lines and you have left sealer on the tiles. Do not worry. If the sealant is still wet, clean it immediately with a clean, soft cloth. If it has already dried, clean only the stained area with a damp cloth and remove the residue with a nonabrasive nylon cleaning pad or sponge.

Step 3

Follow the manufacturer's instructions and prevent people from walking on the work area for several hours while the sealant heals. After the last application dries, test the grout with a few drops of water on it in different places. The ideal is to see that a small puddle forms on the surface.

    It's good to know: The sealant helps prevent dirt and spills from entering the grout, but it is not a miraculous product either. You still need to clean the floor regularly and clean the spills immediately before they seep deep into the grout.

How to clean grout with natural ingredients

How to clean grout with natural ingredients

There are a variety of grout cleaning options. From using bleach to scrubbing simply with warm water and much in between, the opinions on how best to clean the tile grout are varied, to say the least. This tutorial will show you how to clean grout using only basic and natural ingredients: baking soda and diluted white vinegar. For me, this method was easy and provided a slightly cleaner result after an application, although regular or frequent use of vinegar in the grout is argued as a long-term abrasive.

Grout Cleaner Product


Materials needed:

  •     Sodium bicarbonate
  •     White vinegar + water in a spray bottle
  •     Small disposable Packaging
  •     Toothbrush Cleaning
  •     Clean rags
  •     Rubber Gloves (optional)

Start by pouring some baking soda into your disposable container. You're going to create a sodium bicarbonate paste with water.

Pour some water into the baking soda until you have added enough to create a paste consistency. I found that a ratio of sodium bicarbonate to water 3:1 is more or less correct, but do not hesitate to play with this. A little water long ago.

  • Use the end of the toothbrush handle to remove the pasta.
  • When you have a moist but not liquid consistency, you're ready to start.
  • Apply the glue to your grout with the toothbrush bristles.
  • Let the pasta rest there for a minute while you prepare your vinegar + water solution.
  • Mix vinegar and water in a proportion of 1:1 in your spray bottle.

More INSPIRATION

  •     DIY Natural Grout/Tile Cleaner
  •     Natural ways to clean the bathroom and get green
  •     How to clean a bathtub naturally

Spray vinegar + water directly into your glued sodium bicarbonate grout. Be generous with vinegar solution; You will want to clarify in your baking soda paste to react on the surface of the grout. Espumeará a little, which is fun to watch. (And/or will make you realize you need to get more).

Let the vinegar solution settle in the baking soda for a few minutes while frothing. This is actually the power of cleaning and lifting this method of natural ingredients for grout cleaning.

Rinse your toothbrush, and use it to rub the vinegar solution and paste into your grout. Celebrate when you see that the pasta becomes a little gloomy; This is just the cleaner doing his job!

Wet and then drain a rag with wet water, then start cleaning The cleaner when you have finished scrubbing.

You probably need to rinse and clean several times to remove all the glue and vinegar from your grout. (Bonus: This method quickly becomes tile cleaning and grouting, not just grout cleaning, when performing this step).

Let the grout dry to see how well it was cleaned.

As you can see from my results, the grout is cleaner, but not so dramatically. (Actually, it seems more apparent in real life than in these photos).

Some stains were lightened, but still apparent. I like the idea of using natural ingredients that I have handy for cleaning, and this was actually a fun way to clean the grout, especially with all the foam and bubbles and everything else. What is your favorite tip on how to clean the grout?

The best methods to clean tile grout 2019

The best methods to clean tile grout 2019


Whether it's tiles or tiles and it's dirty with grease, soap scum, mold or just dirt, cleaning the grout requires two things: a grout brush and a suitable cleaner. A grout brush is a small brush with hard bristles, available in hand sizes and long handle. You can replace a toothbrush in a pinch, but your bristles are too soft to do much good. As for the cleaner, many formulas work, so you can try different options to find the best interpreter for your mosaic.

Grout Cleaner Product


Chlorine bleach

A traditional way to clean grout lines is to use household chlorine bleach. For a full force application, simply dip the brush in a small container with bleach, rub the grout thoroughly, then rinse with water. Chlorine bleach is somewhat strong, and grout brushes tend to splash, so be sure to wear safety glasses and old clothes. Also open the windows so that the area is well ventilated. Bleach is toxic, releases noxious fumes and can change the shade of colored grout lines over time. Given these drawbacks, chlorine bleach is better as a last resort solution for localized stains, rather than a daily cleaning product.

Bleach with oxygen

Unlike chlorine bleach, oxygen bleach is non-toxic and safe for the environment, and does not have a strong chemical odor. It also does not stain the colored grout lines. Hydrogen peroxide is a form of oxygen bleach; however, it is usually sold in diluted solutions, making it a relatively ineffective cleaner.

Oxygen bleach is sold as a powder that can be mixed with water to create a paste that applies directly to the grout. Let stand for 5 to 10 minutes, then rub with a grout brush. Rinse with water and wipe the floor with a cloth.

Alkaline cleaners

The Tile Council of America (TCA) recommends alkaline cleaners to remove stains from the grout.

Alkaline cleaners include Spic n 'Span, Super Washing Soda and Mr. Clean, among many others. These cleaners are particularly good for cleaning dirty and greasy grout joints in the kitchen. Rinse the solution thoroughly and remove it with a rag, mop or shopping vacuum to remove the white cleaner from the grout.

Why not vinegar or baking soda?

Alkaline cleaners are recommended because the grout contains cement and can be dissolved with acidic cleaners, including vinegar. Do not use vinegar or commercial cleaners based on acid in grout, period. Vinegar and other acids are also a no-no for stone tile because the acid can burn the stone. Another widely praised household cleaner, baking soda, is alkaline (not acidic), but has very little effect as a cleaner on dirty grout. That said, there is no harm in using baking soda if it seems to work for you.

Sealing grout lines

Cleaning grout lines can be a difficult and physical process. Once the grout appears clean and free of stains, sealing the grout will create a protective surface on it that helps prevent staining and makes the grout much easier to keep clean. It is important to follow the manufacturer's instructions carefully when applying the grout sealer. The tile should be clean and completely dry, and you should let the sealer cure completely before using the tiled area.

Maintaining Mosaics

Maintaining Mosaics

Keeping the Tiles

Once you have put your time, energy and financial resources into installing or designing your home, restaurant or establishment with quality concrete tiles, there is nothing worse than not making them look. Always put your best effort to keep your cement tiles looking at the best with the following maintenance tips. Take into consideration the spaces between tiles (or grout) when installing cement tiles is tempting not to leave spaces between them, as many people think that tiles without spaces between themselves look better. Although that is a personal preference and design, the truth is that there must be at least a small space (1/16 ") between the tiles to be able to apply the grout. Fortunately, 1/16 "is a very small space, which makes the hole imperceptible to the eye. Our recommendation is to use nozzle or grout without sand to reduce tile spacing.

Grout Cleaner Product


How to polish and seal your cement tiles?


After installing your cement tiles, make sure to clean them carefully and thoroughly for the best visual results. The following points are key to showcase the new floor of your space: maintain your good physical appearance, receive a number of compliments and help you last for decades and more.

Follow the steps below to polish your cement tiles:

  •     Use a fine sandpaper (600 grit) disc to lightly sand the tile surface
  •     Protect with a good quality penetrating sealer
  •     Buff with a white pad

Sealing your cement tile floor is also an important part of the installation process, as the cement tiles are porous and can absorb unwanted dirt and stains. It has two main options for sealing its cement tiles: penetrating or topical sealants.

Penetrating cement tile sealants are absorbed directly into the cement and make it very difficult for stains to adhere to the tile. On the other hand, topical sealants are deposited on the surface and do not allow stains to pass through. In our experience, we recommend avoiding topical sealants, as the sun can wear them much faster, plus they can make your tiles turn very slippery.

In Granada Tile we recommend Dry-Treat sealants and enhancers, which are specially designed to penetrate much deeper into the tiles and resist more stains. The molecules of the Dry-Treat products are 400 times smaller than those of competitors, allowing the compound to adhere to the tile permanently and provide a more comprehensive protection.

How to clean the cement tiles regularly?


Always avoid using acidic substances or chlorine of any kind to clean your tiles. This is extremely important, as any too acidic substance can wear the sealants faster. Instead, use a neutral pH cleaner and water to clean your tiles.

How to clean stains on cement tiles

One of the first things that comes to mind when it comes to cleaning and maintaining cement tiles, are the spots you will face over the lifespan of these. The first step is to understand what type of stain you are dealing with, to know the best way to remove it and restore the tile to its glorious original state. The types of spots that can be found are biological, organic, inorganic, oil or ink.

  •     Mildew, fungi, algae; These biological stains appear as a result of the contact of your tile with living substances.
  •     Coffee, tea, tobacco, cosmetics or blood; These organic spots come mainly from food and beverage sources.
  •     Iron, bronze or rust (rust); These inorganic stains come from raw materials (unprocessed).
  •     Oil, fat, body oil, different foods; Sealants typically prevent this type of staining.
  •     Inks These stains are typically caused by markers and pens.

Our recommended cleaning method for all of these stains is to use the Dry-Treat Rejuvenate Active, Rejuvenate Spray, Oxy-Klenza or EFF-Erayza products. These products can be used for mopping and cleaning floors regularly, as well as for deep cleanings and stain removal. These products are also perfect for cleaning the mouthpiece or grout.

Monday, May 6, 2019

How to clean ceramic tiles and grout

How to clean ceramic tiles and grout

If you have tile floors in your home and they are made of ceramic, you should be very careful when cleaning them. Using the wrong chemicals and detergents can and will eventually change the quality of your tiles. It would be a shame to lose that beautiful shine you received when the tiles were new. If you are looking for a way to keep your chips as new, do not clean them until you fully understand what is needed.

Grout Cleaner Product


There are some methods you can use to clean them without damage. You can rent an electric floor cleaner or go to your local hardware store and buy a tile cleaning solution. People with large houses will often opt for the electric floor washer because it is much more convenient and gives better results. The results are much better, especially if you rent the polishing machine after washing. All you have to do is mix some chlorine with water and some liquid dish soap. Some have said it is safe to use ammonia instead of bleach. Both forms work well to clean, disinfect and preserve ceramic tiles. This is the best way to get your chips to shine everywhere. This machine will not damage or damage your floor in any way.

You can even buy your own machine for regular use. If you can not bring a heavy-duty machine to your home just to clean the kitchen, then the method you can follow is to use the perfect ceramic tile solution. Most people with smaller homes do it this way. They find it easier, cheaper and less complicated than using the floor washing machine. This is especially true for those with only a small number of ceramic tiles in the house. You must take special care not to buy the wrong solution for the type of ceramic you have, otherwise the tiles will become boring over time. For those who need a quick fix and can not go out and buy something special, there is a way to clean your tiles with soaps that you have at home.

Any of these methods will be safe, everything depends on your budget and what you prefer. You can make your own solution for maintenance; It can be conservative and only use a special tile cleaner once a month and rent the electric floor washer with wax on special occasions.

How to Clean after a Work: Complete Manual

How to Clean after a Work: Complete Manual

Did you just do a one-floor renovation and it's all upside down? Have you bought a new apartment and had to install plugs or throw walls? Do not worry more about the cleaning of the work because in this post you will find the solution to all your problems. Continue reading and discover how to clean up after a work to leave your home or premises impeccable.

Grout Cleaner Product


Adapting to the new environment will be very easy after an urgent cleaning. In any case, if you see that it will be a lot of work, having the services of a cleaning company can be very useful for you to feel your new space like the one of a lifetime.

HOW TO MAKE A CLEANING OF WORK
How to prevent stains during a workProtect the windowscreensRemove doorknobs and door handlesHow to approach the cleaning of the perfect workDo not suffice with one pass to clean everythingPerform the cleanliness of the work ourselvesChoose the specialized productsHelp us from the technologyRelicate the cleaning machinesCurchasing cleaning professionals of worksAdvantages of hiring a cleaning companyThe budget of cleaning workThe cleaning process of a work

How to prevent stains during a work
How to prevent is always better than cure, a good way to save work in the cleaning of work is to take certain preventive measures. After the reform we will have to clean up in any case, but if we organize ourselves well, we can do it efficiently.

Protects windows from windows
Before beginning the renovation, you can place masking tape on the fences, so that the paint does not reach the glass. In addition, you can apply a layer of hot vinegar to prevent it from sticking. This will greatly facilitate the final cleaning after the work.

Remove knobs and door handles
The cleaning of homes will be easier if we remove the knobs before starting the work, since, being metallic, the cleaning of the paint can be complicated. If we keep them, we avoid staining them and we help the doors to be painted better. Remember to place them next to their corresponding screws and pieces.

How to tackle the cleanliness of the perfect work

On many occasions the cleaning of the work is a big challenge because the new materials and, above all, the recent construction, also require different treatments of the dice until now. It is an important investment not only of time but of money.

Cleaning the dust that remains after an integral reform can be very annoying, we can even think that it will never disappear. Despite the care and precautions that workers take to try to stain as little as possible, the soil is usually the most dirty area during a work, so carry out a cleaning of the floor will be one of the priority tasks during cleaning working.

Stains of paint, varnish, cement or plaster are the most frequent and, to treat them, each of them requires the use of a product with certain properties.

One pass will not suffice to clean everything

We must get used to the idea from the beginning that with a single floor cleaning session we will leave our home in conditions, since it requires several.

To resort to a specialized company that offers a cleaning service can be the definitive option for a perfect finish. A contract will save us a lot of time because it has machinery and professional tools. In this case, with a day of cleaning the work if we can finish all the dirt in a deep and uncomplicated way, having some finishes that in some occasions only specific machinery of cleaning work can achieve.

Perform the cleaning of the work ourselves
This is, without a doubt, the most economical option but also the most laborious one. We will need several weeks to clean the building and leave our house in perfect condition. In addition, we will need to rent specific utensils that allow us to eliminate dust, soil stains, glass paint and impurities from plugs and radiators. The most important thing is to choose the right product for each spot and surface, and be very careful following the instructions for each one.

One of the most important tricks is to avoid the accumulation of dirt. If we are going to stay in our home during the work, we should remove as much as possible of dirt after each day. If, on the contrary, we are going to be out, it is advisable to do it on weekends, since the workers will not find themselves working and it will be easier for us to carry out the cleaning of the work.

Choose specialized products
We must know that for each surface and material there are specific products to perform efficiently the cleaning of work, and we must use with special care when the material or object covered with dirt is to be released.



To remove complicated remains such as cement or plaster, we can find products indicated only for this purpose, such as removers.

With paint, which is usually the most common element to clean, you can use generic acetone, but not to eliminate it completely can damage the surface. Therefore, we must resort to solvents that respect the materials.

To remove stains of cement, plaster, calcareous residues or rust from surfaces such as floors, bricks or tiles, which are resistant to the most aggressive products, there are several suitable chemicals. Acid strippers, removers, antiscale or descalers are ideal products for this task.

How to clean stoneware floors or the concern to clean porcelain floors after a work, may be other questions that arise us usually. You have to act in a similar way depending on the material (parquet, tiles, marble ...): the first thing is to detect the type of soil and then apply the specific cleaner for each one only where we find spots, not in a generalized way during cleaning. work.

Help us with technology
When it is not enough that we apply the corresponding chemical products and use the machines that we have at our disposal at home, the rental option is presented as an adequate alternative. These machines are industrial power vacuum cleaners, floor polishers or high pressure cleaners. With them we will achieve a professional result after cleaning the work, although it is advisable to have adequate prior knowledge of its management. We must resort to them when the dirt or stain is very impregnated or because there is a lot of surface to clean.

As in the case of the products explained above, in this case we must also take into account the type of dirt and the surface where we want to eliminate it.

If what we want is to eliminate the dust of floors with a rough surface or large outdoor areas, automatic brooms are a good ally, but if it is smooth floors is enough with a normal vacuum cleaner. If, on the other hand, it is waste whose size is larger than dust, such as small stones, papers or even remains of nails or cables, it is best to use a high pressure cleaner (a machine for cleaning surfaces with a high pressure water jet) or a semi-professional broom.

If it is about stains that are not embedded in the ground, we can obtain very good results if we pass a rotating machine. To the narrow places to which we could not access with the previous ones, we can get well with a water aspirator.

When we persecute to clean the ground, although it is the natural impulse, we should not sweep it. Why? Because we will only transfer dust or debris from one place to another, as well as stay in the air. Instead, we will use a vacuum cleaner with a high efficiency filter. This type of vacuum cleaner allows us to carry out the cleaning of the work efficiently, as they have a great absorption capacity, which is optimal for the dust that remains stuck to the surfaces. We should clean the filter every ten passes, approximately.

You can also use this wireless rechargeable electric floor and carpet brush with numerous features to help with daily cleaning thanks to its versatility.

Rent cleaning machines
If we want to have a more professional result but without resorting to cleaning companies, we can choose to rent these specialized cleaning devices temporarily, as their purchase is not worth it due to its high cost and timely use.

Rental prices vary, especially depending on the type of machine we need and the days we want to hire them. Some of these companies offer discounts the more days they rent. A painter, for example, can be rented for around 5.50 euros a day; a floor polish is achieved between eight 8 and 18 euros; a pressure washer costs about 8 euros; a pipe plunger, 9 euros and a solid vacuum cleaner and water, about 12.50 euros. But much less accessible is to rent a professional sweeper, since the manual style costs 1,000 euros and the driver (battery or gasoline engine) 3,500 euros.

Use professionals in the cleaning of works

Being a work a long process and that ends up exhausting both physically and mentally, what we seek is to be able to enjoy the reform as soon as possible. Therefore, the last thing we need many times is to get ourselves to clean the dirt that has been produced.

That is when we have to seriously consider the possibility of hiring a cleaning company specializing in the cleaning of work, which will guarantee a professional finish.

It is often unknown that office cleaning or industrial cleaning companies offer this service, but it has ended up being the most common.

According to data from the Multisectorial Association of Companies, it is the Community of Madrid that concentrates the largest number of cleaning companies (17%) followed by Catalonia (15%) and Andalusia (14%). And while most of its customers are large companies that require the cleaning of their work centers, more and more individuals are turning to them after a reform at home to clean the work. Therefore, cleaning companies and their prices can be very competitive in cities with so much supply. Hiring a cleaning of floors in Madrid after finishing a work can be very simple with Clean Sil.

Advantages of hiring a cleaning company

The main factor that leads us to rule out a cleaning company too soon is the economic one. But we do not take into account that, in order to carry out this hard work ourselves, in addition to the physical and mental effort, we will need an economic one to use or rent suitable products.

These companies, on the other hand, offer us not only to have these products for their use, (machinery and chemical products) but also labor and extensive experience in the field, which ensures quality and good results in a very short time.

The budget of the cleaning of work
As always in this type of service, the cost is associated with a budget that many times is without commitment. This budget can be calculated even on the website of the companies. The criteria are usually the meters to be cleaned, if it is a single-family house or a flat, if it is a cleaning of newly renovated commercial premises, the amount of dirt accumulated after a work, the days that estimate that they will take to apply the manual of cleaning…

To obtain a budget as reliable as possible, the company and the client agree to a visit so that company technicians come to the place, thus obtaining a personalized cost. In addition, criteria such as the number of windows, the cleaning or not of blinds, the type of painting (to use some products or others, with varying costs), external elements such as viewpoint windows or balconies are taken into account ... For example, If we want to remove dust from a wall with a gotelé, the cost is higher than if it were a smooth wall. The same goes for roofs. It is not the same to carry out a technical roof cleaning than a normal one, of those usually found in homes.

Hiring a company to clean the work of a house of 100 square meters can range between 300 and 500 euros. In return, a team of professionals can clean our house in a single day of eight hours without the need for more passes, something that is considered unthinkable if we were to do it ourselves.

The process of cleaning a work
During the process, companies often allow customers to be present, thus justifying the hours of work employed, also creating a relationship of trust between the client and the company. It is also useful if we want to specify that more emphasis be placed on one area or another. It also helps us indicate which areas we consider particularly sensitive, although the company's experience will not make it necessary.

In any case, it will be necessary for the client to verify that it has been cleaned correctly and not superficially, since the objective of investing in this contract is, precisely, cleaning in depth in a few hours.

In short, if we want that the cleaning of our house does not involve an extension of the tedious reform, our best solution is to take advantage of the professionals who assure us a good service and with guarantees, since this way we will not have done one more expense but an investment in health and time.

And you, you know how to perform a cleaning of work? If you have any questions leave us a comment or contact us and we will help you in everything you need with in-depth cleaning after a reform.

How to Clean Concrete Floors

How to Clean Concrete Floors

The cleaning of outdoor concrete floors is very different from that of concrete floors for interiors. Here we explain how to remove dirt and mildew without damaging your concrete floors.

Concrete is a resistant material for interior and exterior floors. It is durable, easy to clean and quite resistant to stains. However, the concrete gets stained. It is porous and will absorb dirt, spills and mold. No matter how hard the concrete is, you will need periodic scrubbing. So here we will tell you how to clean the concrete, both indoors and outdoors.

Grout Cleaner Product


You may be interested: How to Clean a Cork Floor


A pressure washer is the easiest way to clean outdoor concrete. You must be able to remove dirt, mildew and dirt in an afternoon. The well-known Karcher brand is the ideal solution, of course you should read the instructions on how to use the machine before starting. Spray the surface of the patio with a detergent and use a stiff brush to scrub it in the concrete. Never use a metal bristle brush. Metal fibers and rust can get trapped in the porous surface of the concrete. Put on safety glasses and gloves. Turn on the pressure washer. Move the wand on one side, using the same movement you would do if you were mopping a floor.

Do you want to know how to remove concrete stains? There are several options. You can use chlorine, ammonia (Note: never mix the two) and other commercial solutions. To obtain a natural solution for difficult stains on concrete floors, mix flour and hydrogen peroxide in a paste with the consistency of peanut butter. Spread it over the stained area. Let rest during the night. Then, scrape with a scraper tool with plastic edges.

Trisodium phosphate (TSP) mixed with water and rubbed on the stained area with a nylon bristle brush can remove stubborn stains. Rub until the stain is gone and rinse with a hose. TSP you can buy it by going to the following link https://amzn.to/2JGvwzF.

Muriatic acid can be used on outdoor floors to clean the most difficult stains, such as rust or dry grout. It is a powerful and toxic material that must be used with extreme caution. Wear glasses and protective gloves when you use it and be sure to follow the manufacturer's instructions on how to clean the concrete with muriatic acid.

For polished or patterned interior concrete floors, you should take a gentler approach to how to clean the concrete. You will only use a mop and a bucket of water mixed with a mild cleanser. Do not use ammonia, bleach or any highly acid substance on polished or patterned floors. Some good cleaners include Castile soap, liquid dishwashing detergent, stone cleaners, and mild floor cleaners. Mix a solution, apply to the floor with a wet mop and then rinse with a mop with clean water.


How to Clean Concrete Floors To make your concrete floors resistant to future stains, apply a concrete sealer. Use a paint roller to apply on clean, primed concrete. Start at the center of the area and move the sealant to the edges. Floors should be sealed every two or three years. Knowing how to properly clean the concrete will keep the floors in your garage, workshop and house as new.

How to clean the floor joints without effort

How to clean the floor joints without effort

Blanching the joints of the floor is not always easy, although there are different methods to restore the pavement's splendor
The bathroom or the kitchen are rooms where cleanliness is, more than a recommendation, an obligation. Keeping both rooms in perfect state of review means that each of the elements that are part of the composition look unpolluted. In this sense, whitening the joints of the floor is an indispensable task to achieve that harmony of the whole, something that, in any case, you can move to any other room in the house. It is not enough just to clean the tiles with soap and water, a task that, on the other hand, should be done frequently to minimize the possible wear of the joints. In practice, paying attention to the joints of each piece is essential to achieve that feeling of neatness.

Grout Cleaner Product


But how to clean the joints of the floor? Issues such as the material or the degree of deterioration of the same can give you an idea of ​​what is the best alternative but, in general, the most common is having to face the task in soil stoneware or porcelain floor. Resorting to professional cleaning services is the best guarantee of success in the task. However, you can always start by putting into practice certain recommendations that will help you maintain the floors of your kitchen or bathroom as the first day.

How to clean the joints of the floor with chemical products
Household tasks involve, in many cases, the need to use chemical solutions capable of recovering the properties of the surfaces on which they act. In the market, there are different products that can help you whiten the joints of the kitchen or bathroom floor without too much effort. Before deciding on one or the other, you should consult an expert and it is that applying an inappropriate product can have catastrophic effects on your tiles.

In any case, once the product in question has been chosen, the first step is to prepare the surface by sweeping and scrubbing with water and bleach to eliminate surface dirt. Let it dry completely before undertaking the task of bleaching the joints of the floor, a task for which, only, you will have to follow the instructions of the manufacturer applying the product following the line of the joints and leaving it to act.

After the recommended time (usually 20 or 25 minutes), scrub the surface again with hot water. This way you will be able to soften the remains of the product and completely clean the surface of the tiles of your stoneware or porcelain floor.

Homemade tricks to whiten the joints of the floor
Who said that popular wisdom could not answer the question of how to clean the joints of the floor? Home remedies are great allies in housework although you have to be careful, especially depending on the materials. In general, the traditional recipes suitable for most surfaces are:

- Baking soda:

The same unclog pipes, serves to whiten the joints of the floor and is that, the bicarbonate is a perfect ingredient for cleaning the home. In the case of kitchen and bathroom, more specifically, of the joints of the floor, its application is as simple as preparing a basin of hot water and getting a can of baking soda.

Moisten the surface and then sprinkle the baking soda. As in the case of chemical whiteners, you have to let it work, at least ten minutes and then remove the mixture with a mop or cloth. The results are immediate. Some people also bet on the use of vinegar or the combination of both, for tastes, colors.

- Bleach or ammonia:
They are not natural remedies, although they are traditional. Both bleach and ammonia (always separately!) Can help you clean the floor joints effectively. Once you have chosen the least aggressive product for your stoneware or porcelain floor, it will be enough to apply it on the joints, let it act for fifteen minutes, scrub it with a brush and remove it with hot water.

The value of professional work
While it is true that whitewashing the joints of the floor can be a task to undertake without effort, it is also true that, sometimes, it is titanic. The ravages caused by the use or the passage of time can make the appearance of your tiles and their joints in something difficult to recover and resort to professional cleaning services will save you time, effort and, probably, even money.

There are even times when it is difficult to bleach the joints of the floor and the solution, in these cases, goes directly to replace them. Apply a new tile grout, that is, renew the joints of your tiles, requires certain knowledge and attention so, entrust the task to an expert is not too much. In any case, if you are determined to test your nature of 'hands' at home, you will have to remove the previous grout with care to avoid damaging the tiles, clean the surface, apply the mixture and, once dry, return to clean to achieve the desired finishes.

How to remove dry grout

How to remove dry grout

 How to remove dry grout in tiles. We've tried everything from vinegar to tile cleaner, but nothing works.

Any suggestions?

Answers

Steve Jackson


Your options at this point are to scrape it or dissolve it. My first suggestion would be to contact the tile manufacturer. They Would have the best idea of what their tile can handle in terms of physical or acid abuse.

Grout Cleaner Product


Scraping

The scraping is attractive as a primary option because it can go slowly and start in a small and little visible area to see if it damages the tile. There Is no perfect tool for this for what I know. It Would start with an abrasive sponge (might be lucky), steel wool (good for stripes) and then attack the groups with a razor, a painter's tool or a small sharp chisel. To limit the damage to the tile, you want the tool to be as horizontal as you can and still work safely with it. You should quickly determine how much abuse your tile can handle and if some scratches ruin your floor. It is likely to be a slow and painful process.

Acid

Sulfuric acid will work if the grout is not too thick, the main concern is what to do with the tile underneath. Again, find a small place to try first. The engraving is usually caused because the tile absorbs the acid. To limit this, I would first wet the tile pretty well with clean water. Gloves, mask and good ventilation are essential when working with acid. If the grout is thick enough, it may loosen it sufficiently so you can clean it with a scraping method. Follow the instructions and don't let it rest long enough to pass through the top layer of tiles.

Replacement


I wouldn't overlook the replacement as a possibility, depending on how many tesserae are a problem. It is totally possible to damage the tile when trying to remove the grout anyway. I guess he did the work of the tiles (or I should call the contractor to fix this problem), so he should be able to replace a tile, just smash it, scrape the surrounding grout and install a new one. If it's an old job (and you can find the matching tiles), it may be worth making some calls to find what a tile mechanic could charge for a small job.

BrianK

Are glazed tiles or something like Spanish tiles without enamelling? If they are glazed, they will test a razor blade scraper or a wallpaper scraper. Try to moisten it first. I've heard about people who use acid, but I see some forums where people never say to use it because they can record the tile. If only a couple of days have passed, it should be detached from the glazed tiles. You Can also post a photo. Good luck,

Brian
Bob Arnold

My wife dropped a bottle full of balsamic vinegar on the kitchen floor. He immediately attacked the white tile grout and, when the mess was cleaned, most of the tile grout had disappeared. Balsamic vinegar was blackish in color and white tiles were not affected at all.
Matthew
-1 great story, Bro... Can you adjust your answer to more specifically address the question?

How to clean ceramic wall tiles

How to clean ceramic wall tiles

How to clean ceramic wall tiles ceramic tiles are used in many other types of surfaces, as well as on the floor. Ceramic tiles are often installed on walls and on many other vertical surfaces. The most common area for ceramic tile to be installed is in a shower or bathtub enclosure. Ceramic tiles are also installed in many bathrooms and offer a somewhat hygienic surface that does not stain or absorb smells like the normal wall can. Cleaning ceramic tiles is harder than cleaning common tiles for a simple reason. Cleaning chemicals will not settle and inhabit the surface as easily as they will when applied to floors.

Grout Cleaner Product


Cleaners should be allowed to react with dirt, stains and contaminants so that dirt and contaminants can be removed from the surface of the tile and grout. When cleaning any vertical surface, all the delicate surfaces below and beside the vertical surface to be cleaned must be protected from the cleaning chemicals that will be used. The floors of wood, carpets, laminate flooring, delicate and many other objects surrounding them can be damaged by chemical cleaning products. Sometimes, acid cleaners will work to make the grout cleaner than when using ordinary chemicals for cleaning alkaline tiles. You can spray an acid cleaner directly onto the ceramic tile and shake it on the grout with a toothbrush to scrub. Then a brush scrubbing steeped in hot water to rinse the excess acid cleaner of tiles and Grout can be used.

Spray the acid cleaner on the ceramic tiles of the wall in this way will prevent any excess of acid cleaning chemicals to flow downward vertical tiles and damage underlying surfaces. The use of acid cleaning products requires great care because they can stain carpets and can also record any stainless steel surface that come into contact.

Canvases work well to protect the underlying surface and also to absorb small amounts of cleaning chemicals so they don't seep into the bottom surfaces. Difficult to clean ceramic tiles is how the cleaning chemicals in dirty and Grout ceramic tiles to keep cleaning products to do their job. To clean the tiles of ceramic wall, a sponge for scrubbing soft works best to apply the cleaning chemicals. The sponge will contain a large volume of cleaning chemicals and can use the side of sponge scouring scrubbing to shake the tiles and Grout from ceramic. You should only clean small areas of ceramic tiles at the same time for cleaning chemicals stay in constant contact with area that is cleaned. In general, it will take more time and energy scrubbing the grout for grout as clean as possible.

After a section of the ceramic tile and Grout Cleaning, thoroughly rinse the area of tile and Grout cleaned so there are no remains of cleaner in the tile and grout. Ceramic tiles are extremely dense and hard tile and you can not damage them with most types of acidic and alkaline cleaners.