Toto CT437FG#01 MH Wall-Hung D-Shape Dual-Flush 1.28 and 0.9 GPF Toilet Bowl with CeFiONtect, Cotton

How to measure a toilet tank for a replacement cover

The toilet tank is the portion of the toilet that fills with water and is placed above the seat. The tank comes with a lid that fits perfectly, which may stop working during other bathroom projects or simply by accident. The easiest way to replace a toilet tank lid is by requesting the specific model number, but if you do not have to take the measurements of the tank and the lid to ensure the new lid is an appropriate fit.



Toto CT437FG#01 MH Wall-Hung D-Shape Dual-Flush 1.28 and 0.9 GPF Toilet Bowl with CeFiONtect, Cotton

Instructions

1 Remove the tank lid from the toilet with both hands. Place it face down on a flat surface.

2 Use a tape measure to measure the distance from the left outer edge to the outer right edge of the tank.

3 Measure the distance from the top edge to the bottom edge of the tank. Take this measurement on the far right or left side of the tank.

4 Measure the distance from the upper edge to the lower edge of the tank again, this time in the center of the tank. Some toilet cistern curves or has a recessed area in the center that has a different width than the rest of the tank. Write down the three measurements.

5 Measure the width of the lip on the reverse side of the tank. The lip is the part of the lid that is outside the tank. Take the width measurements of the lip at the same three points on the lid as it did on the tank, from both edges.

6 Add the width of the lip of the measurements taken with the tank. These final measurements are the size of the new lid you need.

American Standard 3705.216.021 H2Option Dual Flush Right Height Toilet Bowl, Bone (Bowl Only)

How to send hot water down the toilet tank for the melting of the Pipe

A frozen toilet tube can affect an entire family in the cold winter months. Pipes can be frozen in old houses or in piping systems that need repair. This condition can usually be solved if it is treated in time, but it is important to solve the underlying problem to make sure it does not happen again. Adequate insulation is usually the key to preventing frozen pipes. Never use a torch or an extreme heating device to defrost the pipe as this is a serious fire hazard and can ruin your pipes.



American Standard 3705.216.021 H2Option Dual Flush Right Height Toilet Bowl, Bone (Bowl Only)

Instructions

1 towels, wrap cloths or a heating pad around the frozen pipe if you can reach it.

2 Turn on all the hot water faucets in the house. As the hot water heats the pipes, it will also heat the neighboring pipes, helping the warm toilet pipe.

3 Pour hot water into the bathroom. Continue adding more and more hot water to the toilet. As the ice begins to melt, you can add hot water. The addition of hot water too early for a frozen system can cause cracks in the ceramic. Waiting until the water level appears starts to lower a little and then add hot water to the cup.

4 Continue adding hot water to the bathroom until it is completely erased. Remove the heating pad.

Kohler K-4380-0 Memoirs Comfort Height Elongated Bowl, White

How to test the toilet tank for leakage with food coloring

Water leak in the toilet tank prevents the full tank from remaining for a long time. As the float ball inside the tank lowers, the fill valve compensates by removing more water. According to the Environmental Protection Agency, a constant hygienic leak can lose up to 200 gallons of water each day. Water that is lost is money lost. Fixing the leak requires first locating its source. The use of food coloring in the tank determines if the leak originates somewhere in the tank.



Kohler K-4380-0 Memoirs Comfort Height Elongated Bowl, White

Instructions

1 Lift each side of the toilet tank cover. Put the lid aside.

2 Take 10 drops of bright food coloring directly into the water inside the tank. Replace the cover.

3 Wait at least 30 minutes before checking the toilet bowl for food coloring. Avoid washing the tank during this process.

4 Open the lid of the toilet bowl and look inside. The presence of food coloring in the water inside the cup indicates a leak inside the tank.

Kohler K-4387-0 Memoirs Comfort Height Round-Front Bowl

How to test a leaking toilet tank

A leaking toilet tank can easily run your home's water bill, while keeping them unnoticed. The loss occurs when the plug on the top of the toilet begins to deteriorate, which limits its ability to retain water in the toilet tank above. Because the water in the toilet is diverted outward, you will never notice an increase in the water level in the container, and the leak may be slow enough so that it is not visible. Instead of calling a plumber to determine if the toilet tank has a leak, there is a test that allows you to detect leaks of yourself. Performing the test itself takes approximately 15 minutes, requires a common element of the house and allows you to avoid hiring a plumber to inspect the toilet.



Kohler K-4387-0 Memoirs Comfort Height Round-Front Bowl

Instructions

1 Lift the tank lid up and out of the tank. Place it on a solid and sturdy surface that will prevent it from falling and potentially breaking.

2 Remove any bathroom cleaners that may affect the color of the water. Pull the chain to ensure that the water in the tank is clear.

3 Apply the dyes with the water in the upper tank. Alternatively, if you do not have food coloring, use fruit juice powder or instant coffee. Make sure the water in the tank is a deep color, not clear.

4 Allow the toilet to sit for approximately 15 to 30 minutes. Do not let anyone use the toilet during this time.

5 Look at the water in the toilet after the allotted time has elapsed. If there is any dye in the toilet bowl, the toilet tank leaks.

TOTO C744EL#01 Drake ADA Compliant Elongated Bowl, Cotton White

How to repair a leaking toilet tank

The toilet tank contains the water before rinsing. After pressing the discharge handle, the water in the tank is exhausted to the bowl and the distance colors of the wastewater. Because it is constantly carrying water, the tank has a lot of opportunity to leak. A leaking tank should not have to call a plumber immediately, however. Repairing a leaking toilet tank is something that even the average diyer can do on its own.



TOTO C744EL#01 Drake ADA Compliant Elongated Bowl, Cotton White

Instructions

1 Turn off the water in the supply. This is under the tank on the side of the wall. Cut the water by turning the knob clockwise. This will help prevent new leaks.

2 Unload the toilet to get rid of all the water inside the tank. Collect the extra with rags and sponges.

3 Disengage the water supply from where it connects to the tank.

4 Remove the tank from the bowl. The heads of the screws are in the lower part of the tank. Hold a screwdriver on their head while unscrewing the nut from below with a wrench. In most models, two bolts are holding the tank to the cup.

5 Set a towel on the floor. Carefully lift the tank from the cup and put it upside down on the towel.

6 Remove the cone gasket at the bottom of the tank. This is the part that connects the tank to the cup. Check this for leaks. Even if it is in good condition, it is a good idea to change these each year more or less. Replace the cone seal or replace it with a new one.

7 Check the rubber gaskets on the bolts. As with the cone gasket, they can deteriorate over time. Replace those that are cracked or broken.

8 put the tank back in the cup. Make sure that the cone seal is correctly aligned with the hole in the container.

9 loosen the screws and rubber washers through the holes in the bottom of the tank and through the container. Tighten the nuts of the tightened hand, and then an additional turn with the key.

10 Wrap a strip of plumber's tape around the water inlet in the tank. This will help prevent the water supply from leaking. Squeeze the water hose in the inlet, the hand tightened at first, and then use a wrench.

11 Open the water supply and allow the bath to fill.

12 Pull the chain. Check for leaks around the tank.

Tips and warnings

•     Be careful not to over tighten the nuts around the toilet, as this could break the porcelain.
•     Do not try to repair a fissured toilet tank crack with putty. Replace the entire tank.

TOTO CST784EF#01 Eco Clayton with Elongated Bowl, Cotton White

How to remove a tank from the toilet with a key

Sometimes it is better to use a pipe wrench to remove the toilet tank from your toilet due to the limited area in which to work. The toilet flange is molded in a way that prevents getting a good grip around the toilet cistern fixing nuts with a standard wrench. A pipe wrench works well in this case because the socket fits into the small area and the handle of the pipe wrench is far from the toilet flange, which allows it to turn the nut. Removing a toilet tank with a pipe wrench is still the same process as if you were using a standard wrench.



TOTO CST784EF#01 Eco Clayton with Elongated Bowl, Cotton White

Instructions

1 Close the water supply to the toilet. The water supply valve is behind the toilet between the house line that comes out of the wall and the line that goes to the bottom of the toilet cistern.

2 Remove the tank lid, and pull the chain. Keep the dump lever down until almost all the water is out of the tank. Absorb the remaining water in the tank with towels.

3 Turn the water line connector on the bottom of the toilet tank to the left by hand. If you have a plastic pipe or copper pipe as a water line, loosen the connecting nut with a wrench to disconnect the water line from the tank.

4 Place a large flat-blade screwdriver on the slotted head of one of the tank bolts inside the bottom of the tank. The heads of the tank bolts are near the discharge valve on the bottom of the tank.

5 Loosen the tank bolt nut below the tank with a socket wrench and socket. Do not allow the handle of the pipe wrench to strike against the outside of the toilet bowl when loosening the nut. Once the nut is loose, keep turning to the left with your fingers until it is out of the bolt.

6 Repeat for the remaining tank tank bolt. Once both nuts are out of the toilet tank bolts, lift the toilet tank.

Tips and warnings

•     Some manufacturers use three toilet tank bolts to secure the toilet tank.

American Standard 3483001.020 Cadet Right Height Elongated Universal Bowl in White

What is a toilet tank with insulation?

Insulated toilet cisterns provide a way to combat sweat baths, which commonly occur in areas with high temperatures and humidity. You can use a toilet with an insulated tank and not realize it, unless you know where to look for the insulation material. Insulating a toilet tank will help prevent serious damage, not only to the bathroom, but the structure of the house.



American Standard 3483001.020 Cadet Right Height Elongated Universal Bowl in White

The sweat baths

Toilet cisterns contain cold water, that is, the tank is also cold from contact with water. In areas that have hot, humid climates, tank sweats like hot, humid air come in contact with the cold toilet tank. The air condenses in the tank, creating sweat. If a house has a dehumidifier or air conditioner, the tank does not sweat much or nothing at all.

Potential water damage

As the water in the air condenses into the toilet tank more and more, the water mixes into larger droplets and starts running down the sides of the tank. The water droplets eventually drain off the toilet tank and fall to the ground. This accumulation of water leads to water damage to the floor of the bathroom, as well as the subfloor and the room below. The constant humidity from the sweat tank can also lead to the growth of mold in the bathroom.

The insulation kits

An isolation kit prevents sweating, covering the inside of the tank with foam or rubber. The insulation material keeps the sides of the tank from becoming as cold as before, since the tank no longer has contact with cold water. An owner installs the kit by draining all the water out of the tank. Next, cut pieces of foam or rubber to fit the walls of the tank. An adhesive that comes with the kit contains the pieces on the sides of the tank.

The anti-sweat valves

An alternative to tank insulators, anti-sweat valves introduce some hot water into the water supply of the toilet. This hot water is mixed with cold water, raising the temperature enough to avoid any future ideally odorless sweat. Some anti-sweat valves come with an adjustment option, which allows the user to increase or decrease the amount of hot water entering the water supply of the toilet. These valves also allow the user to close the valve during the cold times of the year.

TOTO C744E#01 Drake Elongated Bowl, Cotton White

How to repair a crack in a toilet tank

Today's plastic toilet cisterns rarely crack, but older porcelain tanks can crack due to damage or impact. It is common to replace a toilet tank when a crack occurs, since crack repair may require more time, effort and cost than a simple replacement. However, small cracks lend themselves to a quick repair job needing only a few materials and tools that can be easily obtained. Give a repair crack to the toilet tank one chance before looking for a new tank.



TOTO C744E#01 Drake Elongated Bowl, Cotton White

Instructions

1 Close the water to the tank and dry the tank completely. Clean the area of ​​the crack.

2 Drill a hole completely through the porcelain with a Dremel tool and little rotary shredder with embedded diamonds. Pierce the farthest visible extension of the crack. Wet the bit periodically with a sponge to keep it cool, which will control dust and keep the crack from spreading.

3 Drill a V or U-shaped area along the crack to remove dirt and give the epoxy a large surface for bonding. Drill the area about 1/8 inch deep and 1/8 inch wide.

4 Fill the crack with industrial white epoxy. Soften the epoxy so that it rises just a little higher than the level of the surface of the toilet tank. Put a piece of clear adhesive tape on top of the epoxy-filled crack to keep the epoxy in place while it dries.

5 Sand the epoxy to the surface of the tank. Start with the coarser grain paper (40 to 60 grit) and gradually move to finer grain (600 grit sandpaper). Continue until the cracked area looks smooth. If air bubbles occur, add more epoxy and re-sand after the epoxy dries.

6 surface spray to repair renovation of the spray finish in the epoxy dries and let it dry, followed by a spray repair of the clear surface shine.

Tips and warnings

•     Wear safety glasses for this project.

Saniflo Saniflo 087 Elongated Toilet Bowl only (1.28 GPF) For SANIFLO Macerator Systems White

How to increase the water level in a toilet bowl

Having the proper amount of water in a toilet bowl helps to flush it completely clean. The amount of water in each individual toilet bowl is determined by the shape of the toilet itself. Some are designed to leave only a small amount of water in the cup. However, if the water level in the toilet is not allowing the passage of fluid each time, it can be easily adjusted with a few simple steps.



Saniflo Saniflo 087 Elongated Toilet Bowl only (1.28 GPF) For SANIFLO Macerator Systems White

Instructions

1 Remove the lid of the toilet tank by simply lifting it up and locating the float inside the tank. The float looks like a ball and is usually attached to the end of a metal or plastic rod.

2 Locate the screw that is on the opposite end of the float, in which the metal or plastic rod is connected to the water valve. If you see more than one screw, adjust the screw that connects to the metal or only plastic rod.

3 Adjust the screw with a screwdriver, to reset the height at which the float closes the water valve. Each bath may be different, but most likely you will have to turn the screw counterclockwise. Adjust the screw approximately 1/4 turn, check the water level and repeat this process until the desired water level is reached.

American Standard 3717B001.020 Cadet 3 FloWise Right Height Round Front Toilet Bowl Only in White

The addition of water to the back of a toilet tank

The back of a toilet consists of a tank that contains the water that is used when flushing the toilet. The water drains from the tank to the bowl when the chain is pulled, pushing the water from the bowl and the contents down the drain. If the water level of the tank is too low or if you need more water to add pressure to push down contents of the cup that are not easily flushing, you can add water to yourself. This is not a permanent solution for a toilet that eliminates incorrectly or is always running.



American Standard 3717B001.020 Cadet 3 FloWise Right Height Round Front Toilet Bowl Only in White

Instructions

1 Remove the top cover of the toilet tank. Consider the water level in the tank.

2 Pull the chain while looking inside the toilet tank. Write down where the water level stops. Observe the inside wall of the toilet tank for a watermark or a fading line.

3 Locate the water overflow tube in the tank - a small tube on the top of the tank that deflects the water when the level is too high.

4 Slowly pour the water into the toilet tank until it reaches the level of water discoloration or until it is about one inch below the opening of the overflow tube.

5 Rinse the bathroom to clean the toilet bowl and inspect the level of water that rises in the tank. Add more water if necessary.

Tips and warnings

•     If the water level is consistently low, this may indicate a problem with the toilet itself. If the arm of the float in the tank is not rising or falling, you may need a replacement. If the water runs constantly, it means that the seal flap locking the hole in the bottom of the tank is loose or misaligned. It can also mean that the float arm is perfectly aligned or broken and must be replaced.
•     Do not overfill the toilet tank as this could cause overflow.
•     Use a plunger to unclog a clogged toilet before using the water tank filling method.

TOTO CST743S#01 Drake Round Bowl and Tank, Cotton White

How to increase the amount of water in a toilet tank

The ability of a toilet to flush is determined successfully by the amount of water contained in the tank. Low-flow toilets adjust the mechanics of the toilet bowl to allow a smaller amount of water to clean the toilet. Low-flow and standard toilets must still maintain a specific amount of water in the tank to work properly. The water level has to sit within 1 inch of the top of the overflow pipe. Adjusting the water level is a simple matter of adjusting the float or the float.



TOTO CST743S#01 Drake Round Bowl and Tank, Cotton White

Instructions

1 Remove the lid on the back of the toilet and identify the type of float used in your tank. A ball float is a round ball that connects to the water filling valve through a long, horizontal tube. A flotation cup is a round cylinder wrapped around the filling valve and connected to the tip of the valve through a vertical bar.

2 Adjust the ball float by firmly holding the rod in two hands and bending the rod up or down as necessary. Increasing the water level requires that the float be bent upwards. Let the water fill the tank after adjusting the float to determine if the level is appropriate. Re-adjust as necessary.

3 Adjust the float cup by tightening the adjustment clip on the side of the cylindrical cup that holds the vertical rod against the float cup. Lift the float up or down as desired to adjust the water level. Let the tank filling to test the level. Re-adjust as necessary.

4 Precisely adjust the water level by turning the adjusting screw located at the top, the center of the filling valve. Turning the screw to the right will increase the water level in small increments. The screw can only be adjusted a certain amount before the float locks in place, so only use the adjusting screw for fine adjustment after adjusting the float.