How to clean grout lines with a Dupray steam cleaner

How to clean grout lines with a Dupray steam cleaner

How to clean the grout with a steam cleaner

Ceramic tiles and grout tend to get dirty very quickly and are one of the most difficult cleaning jobs. The accumulation of dirt, grease and grime in the grout is very unpleasant to the eye due to the drastic color change that radically alters the appearance of your floors and walls.

Grout Cleaner Product

The way most people manage to accomplish this difficult task is by using small brushes and many cleaning chemicals that are very aggressive. Some of these harmful chemicals discolor the grout or erode parts of it. Sealing the grout will only work if it is perfectly clean at that time, unless you want the grout to be permanently dirty. We do not have to explain why this work usually creates mess or dirt and takes a lot of time. Here we will show you how to clean the slurry 80% faster for exceptional results using a powerful Dupray commercial steam cleaner. A good quality dry steam cleaner is undoubtedly the most efficient, non-messy and environmentally friendly way to quickly return any grout to its original color. The high temperatures, the low humidity and the gentle pressure of the steam, in fact, release the dirt from the grout and bring it to the surface where it can be easily cleaned or extracted. When using a vacuum cleaner such as the Super Inox Carmen or the Dupray Steam Box Vac, the extraction function is already included. The steam cleaning of the grout also means that you do not need to be on your knees washing the floor. Using the 2 extension tubes, the operator can work in vertical position on floors and even ceilings. You can also use the grout cleaning lancet directly on your steam hose to clean the walls more effectively.

TO START:

1. You will need your steam cleaner, the steam hose, the 2 extension tubes, the lancet (the vaporizer) and a nylon or brass detailing brush, depending on the strength of your grout (always make one test first).

2. Connect these parts together and place the detailing brush on the steam lancet.

3. Select the vapor pressure at low or medium temperature.

4. Place the lancet directly on top of the grout and pass it at a steady rate in the forward direction, not sideways.

5. Finally, all you have to do is clean excess moisture and dirt that was removed from the grout, either with a towel or a mop. Not only will it completely restore the grout, but your steam cleaner can also clean the entire floor or wall at the same time.


It is not necessary to wear a mask, gloves or spend money on harmful chemical cleaners; With the proper machine, you will save a lot of time, money and back pains. Steam cleaners are especially good for certain areas that are difficult to reach, such as grout at the base of toilets or showers, where moisture can cause stains. Another is the grout around the beds for pets or sandboxes. The entrances and side doors also need additional cleaning of the grout. The grout around the kitchen equipment, where the mop has carried a collection of dirty and greasy water over the years, is another incredible point to clean with your high quality Dupray steam cleaner. Remember that there are some rare exceptions where steam cleaners are not the solution. First, if the grout is sealed, the steam will not remove the dirt that is under the sealant. Secondly, broken and very old slurries in which holes and cracks can be seen should not be cleaned with steam. Normally the grout erosion is the result of a chemical reaction of the acid cleaning product that was previously used. In these cases the grout must be replaced.

How to clean grout joints in ceramic floors

How to clean grout joints in ceramic floors

For ceramic floors to always maintain an attractive and shiny finish and at the same time have a longer lifespan, it is necessary to do a good cleaning job that includes the elimination of accumulated dirt in the grout of the joints.

Grout Cleaner Product

Below, some recommendations will be given to clean up the impurities that penetrate the Pastina. These tips are not only useful in the case of floors, but can also be applied to toilet walls and worktops made with ceramic tiles.

How to clean grout from joints on ceramic floors

Although ceramics can withstand dirt and stains, grout presents the drawback of being porous, making it easier to absorb dirt and spills, causing them to quickly stain or smear and end up Afeando the General aspect of the floor. In a kitchen, liquid spills and grease are the main culprits of dirt accumulated in joints, while soap, mold and fungi are the most common soil factors in bathrooms.

The first step in this cleaning process involves pouring hot water over the surface, then spraying a cleaning solution directly into the grout. At this stage you can resort to a home remedy by mixing the same proportions of white vinegar and water in a bottle with sprinkler. The product is sprayed over the gaskets and allowed to stand for five minutes. After that time and with the help of a soft bristle brush is proceeded to scrub the lines of Pastina.

In this work it is not advisable to use metal brushes, since this material can scratch the ceramic tiles and you can even end up tearing pieces of the mortar.

Then, and to finish the work, you should rinse the entire floor thoroughly with hot water.

You can also use commercial grout-specific cleaners, and even bleach diluted. In these cases the manufacturer's instructions should always be followed on how to clean the joints between the tiles. It should be noted that these are caustic products that require moderate use, because otherwise the abuse can lead to the erosion of the grout or to damage to the surface of the ceramics.

For those more stubborn soils, a two-part sodium bicarbonate paste can be made with a portion of water. This mixture should be applied to soil stains on the Pastina, allowed to rest overnight and then rubbed with a plastic bristle brush. Finally, rinse thoroughly with hot water.

Cleaning of grout on floors: other homemade solutions

Other homemade grout Cleaning solutions on ceramic tile floors include the use of sandpaper and erasers. In both cases, rub back and forth through the dirty grout line, then rinse with hot water.

After cleaning, the Pastina should be allowed to dry for at least 24 hours, then apply a silicone-based Grout sealant to provide greater resistance to future stains and dirt. This protective liquid should be applied every two years or more frequently if the treated floor is in a high-traffic area.

How to re-apply grout on tile floors

How to re-apply grout on tile floors

The grout is the material that is between the tiles to fill the spaces and provide additional support to the tiles. When applied for the first time on a tile floor, the grout provides an orderly, clean appearance to the surface. However, over time the grout may crack, stain or be damaged. This can make the whole floor look bad. What's more, cracked or damaged grout can be a big problem in allowing moisture to get under the tiles. It is important to repair the damaged grout not only for aesthetic reasons, but also to prevent problems caused to the tiles.

Grout Cleaner Product

Instructions

Clean existing grout with a scrub brush and commercial grout cleaner. This will remove dirt, mildew and other debris from the grout. Let the area dry completely.

Use a saw to remove the grout that is damaged. These saws are cheap and can be purchased at most hardware stores. Remove the loose grout. The saw will grind the grout.

Use a damp cloth to moisten the cracks where you will apply the new grout. Do not saturate the area, but make sure it is moist. A little moisture is important for the grout to adhere properly to the tiles.

Mix a little grout as indicated by the package instructions. Do not mix too much grout too soon, or it will harden before you apply it.

Spread the grout on the surface that needs to be filled. Use a float to soften the grout, applying even pressure while working on the joints.

Level each board once you fill them. Moisten your fingers and soften the grout in the joints.

Remove excess grout from joints and tile surfaces by brushing them with a rubber brush or sponge. Avoid reviewing a specific area several times; This could interfere with the grout that has begun to dry in the cracks.

Allow the grout to dry according to the manufacturer's instructions. Apply a sealer to protect the grout from future stains and mildew. Remove the residue from the tiles once the grout and sealer have dried completely.

You will need to

• A scrubbing brush
• A commercial grout cleaner
• A grout saw
• A wet cloth
• Grout
• A float for grout
• A squeegee or sponge for grout
• A grout sealer

Secrets to the grout of shower tiles

Secrets to the grout of shower tiles

You did your research and learned how to install cement base plates, tiles, glue and all the unforeseen aspects of a construction project. Put on blood, sweat and tears in the shower work with new tiles, and the final result shows your effort. However, the remaining step, the grout of the shower tiles, can easily make or break the quality of your tile project. Remember to use grout with sand for 1/8 inch (0.31 cm) or larger grout lines, and use sandless grout for lines less than 1/8 inch (0.31 cm).

Grout Cleaner Product

Coherence and application
The achievement of the correct consistency of the grout is the first secret of this for the tiles for the shower. For example, the slurry that is too watery or as "soup" makes a terrible mess that requires additional cleaning and unnecessary physical effort. The experts in placing tiles mix until they obtain a consistency of medium thickness grout and apply it with a new rubber spatula. What they apply by rubbing on the lines of the grout, which then "cut" the excess back at a 45 degree angle with the rubber spatula. Also, make sure you compact the grout in the grout joints, preventing any gaps from forming in the grout.

Test area and take your time
When applying the grout, start slowly and rub an initial test area to see how the grout responds to the material. This way you can get an idea of ​​how far the grout can go. For example, if the grout dries in a matter of minutes, it is a good idea not to spread too much grout too quickly. Take your time and do the job well, spreading the grout too far can result in a tile disaster.

Drying time
Wait 30 minutes to an hour to allow the grout joints to dry to medium consistency before washing off the excess grout with a sponge and water. The fastest drying times are possible in the heat; Slower drying times are common in cold conditions. Read the manufacturer's instructions to know the proper temperature of the grout. Trying to speed things up by washing too soon will only wash the grout from the lines and restore the entire grout process.

Also, keep in mind that grout often dries faster on the surface of the tile but still remains wet on the grout lines. Keep the tiles of the shower free of grout as much as possible during the process to avoid damaging the surface of the tiles.

Grout release
Expert tile setters use a cement grout release (also known as a penetrating sealer) to seal the natural porous stone surface or ceramic tile in a shower. A grout remover effectively blocks a good part of the staining properties of the cement grout and prevents it from drying out too quickly on the joints or on the surface of the tile. Home improvement stores and tile suppliers have penetrating sealers used as a grout release.

Tips on cleaning grout after tiling

Tips on cleaning grout after tiling

Tiling an area yourself can save you money and if you follow the instructions carefully, the tiles can produce professional looking results. One of the most important parts of tiling is cleaning the grout from the surface of the tile before it dries completely, which will save you a lot of work and will ensure that the finish of the tiles is bright and bright as it should be.

Grout Cleaner Product

Remove wet grout
Extracting the wet grout is not difficult, but you have to be careful and measure the process correctly to make sure you do not have to scrape the dry grout from the surface of the tile. Wait a few minutes after you have finished applying the grout between the tiles, which will give the grout time to settle down a bit so that the cleaning process of the tiles does not move them. After a few minutes, clean the surface of the tiles with a damp cloth or sponge. Be careful not to damage the grout between the tiles, as they will damage its appearance. Rinse the cloth frequently to make sure there is no residue.

Eliminate dry grout
If you can not clean the grout before it dries, you will be left with a thin layer of grout on the tile that you can not remove from the surface by simply wiping it with a damp cloth. Instead, apply a water and sugar solution to the tile and let it sit for a few minutes before scrubbing the grout with a plastic scouring pad. Do not use steel wool, because it can scratch the surfaces of the tiles and ruin them, you could also remove any layer on the tile that makes it shiny and smooth. For the sugar solution, add 1 cup of sugar and 1 gallon (3.79 l) of warm water.

Remove epoxy grout
Epoxy grout is much harder than Portland cement and is impossible to remove once it dries completely. To use it, you will have to apply a solution to the surface of the tiles before applying the grout. This solution will prevent the grout from remaining on the tile and will force it between the tiles. If the solution is not well applied, the epoxy grout will remain on the surface and may be impossible to remove. You'll have to break the grout and re-tile the area.

Clean dry grout
The grout is usually made of cement, which means that it will be more porous than tiles and will absorb stains easier. Over time the grout will get dirty and this grime can be difficult to remove because it has infiltrated the grout. Use oxygen bleach to remove dirt and stains. Oxygen bleach is a nontoxic powder bleach that will make bubbles when mixed with water. These bubbles will help eliminate stains.

Cleans grout or tile joints easily and without toxic

Cleans grout or tile joints easily and without toxic

A perfect alternative to clean not only the kitchen floor gaskets but the one of any tile or tile without contaminating chemicals.

Keeping the kitchen floor clean is tedious enough to worry about the small space between the tiles. Space that by the porosity of the material with which it is made, is usually filled with grease and stains difficult to remove during our cleaning routine.

Grout Cleaner Product

Use this technique for floors, tile or tile.

What you need

• – 1 cup baking soda (two parts)
• – ½ Cup of oxygenated water or hydrogen peroxide (one part)
• – 1 Old Toothbrush
• – 1 Clean Rag

01. Mix

Mix baking soda with oxygenated water to form a paste.

02. Spread the mixture

Using the old toothbrush, spread the dough over the grout or gasket, estregando in circular motions.

03. Wait

Let the mixture act for 15 minutes.

04. Clean

Clean the excess with a clean, wet cloth.

How to clean the grout between tiles

How to clean the grout between tiles

Grout is the mixture of hardened cement and sand in the middle of the wall or tiles. Over time, dirt and mildew settle in cement grout, discoloring the material and could produce odors. The grout may be so dirty that the lines between the tiles have a black color. You can buy a chemical cleaning spray to rinse the grout or mix your own effective solution with household ingredients. A toothbrush is a very useful tool for debugging in the grooves between the tiles, to clean the grout.

Grout Cleaner Product

Need:

•     1/2 cup sodium bicarbonate
•     1/3 cup ammonia or lye
•     1/4 cup white vinegar
•     Wet sponge
•     Plastic Atomizer
•     Old Toothbrush

Steps to follow:
1

Pour baking soda and vinegar through the funnel into the bottle and fill with water. Add ammonia or chlorine, but not both. Shake vigorously to mix the home cleaner.
2

Spray Cleaning solution into grout and let stand for five minutes.
3

Rub grout with old toothbrush to remove dirt and mildew.
4

Clean tiles and grout with a damp sponge or wet mop.

If you want to read more articles like How to clean grout between tiles, we recommend that you enter Our household cleaning category.

Tips

•     Replace bleach with ammonia for greater bleaching power.
•     Do not mix bleach with ammonia.

How to clean the grout after it is dry for a while

How to clean the grout after it is dry for a while

After designing grout between the tiles in your kitchen, bathroom or other area of your home, it is necessary to let the grout dry for a while before touching it. Letting the grout rest all night is usually cured enough to handle daily wear for daily use. After a short period of time, you might find that your freshly dried grout is already starting to look dirty. Regular cleaning of your grout will help maintain the same color as it was on the day you installed it.

Grout Cleaner Product

Instructions

1 fill a spray bottle with water and spray your grout. Add sodium bicarbonate for grout.

2 Pour the undiluted vinegar into a second spray bottle and soak the grout.

3 wait 30 minutes. The bubble will vinegar and baking soda as it works to clean the grout.

4 Rub the grout lines with a small brush, such as a toothbrush, using circular motions; Top-down movements can damage the grout.

5 Spray the grout with water and clean the cleaning solution with a clean cloth.

How to clean the Haze grout from porcelain tiles

How to clean the Haze grout from porcelain tiles

New tile work can be beautiful, functional, sometimes even a work of art, but opacity is simply irritating. Do not let the left mist behind the grout cloud the shine of the new branded porcelain tiles. Take out your supplies and be ready to use a little effort to bring the shine back to the wall or tiled floor.

Grout Cleaner Product

Instructions

1 Clean the tiles immediately after Grout has had about 10 minutes to set up. Use a large sponge that has been moistened with clean water. Clean the surface with a single stroke, turn the sponge to the opposite side, clean the surface again, then rinse the sponge with running water or in a clear bucket of water. Work quickly so that the surface does not dry while you are cleaning, making the polymers in the grout set on the surface of the tile.

2 Polish The surface of the tiles with a dry cotton cloth or a microfiber cloth. To polish out the tiles so that any remaining grout stained by the tile surface is removed. To work with circular movements, paying special attention to the areas closest to the lines of the grout where there could be a greater accumulation of residual grout.

3 Remove any remaining mist rub the surface with a damp nylon scouring pad to rub the stubborn grout left behind. Polish then with a soft dry cloth to remove the finer particles.

4 After grouting has been allowed to cure for at least one month, moisten the surface of the hazy tile. The use of gloves, use a rag to apply a small amount of sulfamic acid is diluted with water to the surface of the tile to dissolve the polymers in the grout that are creating the mist. Follow the manufacturer's instructions for the application of the acid, and rub the surface with a nylon scouring pad. Rinse tile as in step 1 to remove grout, but neutralize acid by adding half a cup of household ammonia per gallon of rinse water.

5 If the mist remains stubbornly remains on the surface of the porcelain tile, try powdered detergent. First Test the cleaning powder in a small, discrete area of the tile to make sure it does not scratch the porcelain. If there are no scratches, use a rag to work the dust back and forth through the surface of the ceramic, then rinse as in step 1, and Polish as in step 2.

Tips and warnings

•     Sulfamic acid, not recommended for marble, natural limestone or travertine tiles.

How to clean grout efflorescence

How to clean grout efflorescence

Efflorescence Grout is the white mist on the tiles after installation. It usually does not come out with the initial cleaning of the tiles immediately after installation. Efflorescence of grout occurs when the salts in the grout leach through the tile surface. Although efflorescence can be removed from the tiles, you should wait at least 3 days after installation before applying the water, and at least 10 days before applying any acidic products containing. This will give the grout enough time to cure. It can effectively eliminate efflorescence grout by using the appropriate methods and products.

Grout Cleaner Product

Instructions

1 use distilled white vinegar to remove slight opacity. Apply undiluted vinegar to the tile with a rag and clean the tile flowering. Follow this for cleaning the tiles with soap and water and dry well with a clean towel.

2 Mix ½ pound of sulfamic acid crystals in a bucket with 1 gallon of hot water for harder efflorescence of grout. Sulfamic acid is a product that is readily available at most home improvement centers.

3 Use A clean sponge to soak the affected area with running water. Let the tap water sit on the tile for about an hour.

4 Use dry towels to absorb the water from the tile. The acid solution is poured into the tile so that it forms puddles in the joints.

5 Scrub The tile with a nylon cloth. Let the acid solution sit on the surface for about 5 minutes, then rub the tiles again.

6 Clean the acid solution with wet rags in clean water. Dry the tile well with a clean towel.

7 apply a specific type of tile cleaner that is working with a product or remove misting grout. Follow manufacturer-specific instructions for application.

8 phosphoric acid sulfamic acid Substitute if the efflorescence is very bad. Phosphoric acid is a strong chemical that sulfamic acid and will be effective in eliminating the most problematic cases of grout efflorescence. Mix 1 part phosphoric acid in a bucket with 5 parts of running water. Apply and clean the solution in the same way used with sulfamic acid. Follow-up by cleaning the tiles with a tile cleaner suitable for the specific tile being worked.

Tips and warnings

•     Wear rubber gloves, protective goggles and long sleeves and pants when working with acid-containing products. These chemicals can cause serious damage to your body.
•     Never apply acid to tile without wetting first. The tile may suffer acid burns if it is not moistened prior to application.
•     Test the product you are using in a small area of the tile before applying it everywhere. Look for any discoloration or damage to the product may cause the shingle.

How to clean Haze grout with a home remedy

How to clean Haze grout with a home remedy

Opaque white nozzle inevitably accumulates on newly installed tiles during the injection process. Opacity is made up of cement and additives, which harden and increase their bonding to the tiles over time. Grout sets on longer, more difficult turbidity tiles are re-cleaned. If opacity is not removed in a timely manner it can cause tiles to become permanently disfigure with white residue. Fortunately, commercial opacity removers are not required to remove tile grout mist; Home remedies are equally effective, but cost less and contain no toxic chemicals.

Grout Cleaner Product

Instructions

1 fill a bottle of spray with lukewarm water. Sprinkle the water on the affected tiles to completely saturate the opacity.

2 fill a plastic pail with lukewarm water for rinsing purposes.

3 Rub wet tiles with a degreased synthetic fiber pad to remove mist from grout. Frequently wet the scrubber in the rinsing bucket to avoid re-applying grout particles from the tiles. Clean as many opacity as possible.

4 Examine the tiles for traces of remaining opacity. If white residue persists, fill a second bucket with one gallon of warm water. Dissolve a cup of sugar in the hot water.

5 pour the sugar solution over the remaining opacity. Leave the solution in the fog for two hours.

6 Scrub The remaining opacity with the scouring pad. Periodically rinse the scouring pad with fresh water.

7 Clean tile with paper towels until dry.

Tips and warnings

•     Replace an oak wood stick with vivid edges for the synthetic fiber scrubbing pad. Wear leather gloves to prevent wood chips from spreading.
•     Abrasive cleaning pads, metal scrapers and wire brushes can scratch the tiles.