How to clean ceramic tiles and grout

How to clean ceramic tiles and grout

If you have tile floors in your home and they are made of ceramic, you should be very careful when cleaning them. Using the wrong chemicals and detergents can and will eventually change the quality of your tiles. It would be a shame to lose that beautiful shine you received when the tiles were new. If you are looking for a way to keep your chips as new, do not clean them until you fully understand what is needed.

Grout Cleaner Product

There are some methods you can use to clean them without damage. You can rent an electric floor cleaner or go to your local hardware store and buy a tile cleaning solution. People with large houses will often opt for the electric floor washer because it is much more convenient and gives better results. The results are much better, especially if you rent the polishing machine after washing. All you have to do is mix some chlorine with water and some liquid dish soap. Some have said it is safe to use ammonia instead of bleach. Both forms work well to clean, disinfect and preserve ceramic tiles. This is the best way to get your chips to shine everywhere. This machine will not damage or damage your floor in any way.

You can even buy your own machine for regular use. If you can not bring a heavy-duty machine to your home just to clean the kitchen, then the method you can follow is to use the perfect ceramic tile solution. Most people with smaller homes do it this way. They find it easier, cheaper and less complicated than using the floor washing machine. This is especially true for those with only a small number of ceramic tiles in the house. You must take special care not to buy the wrong solution for the type of ceramic you have, otherwise the tiles will become boring over time. For those who need a quick fix and can not go out and buy something special, there is a way to clean your tiles with soaps that you have at home.

Any of these methods will be safe, everything depends on your budget and what you prefer. You can make your own solution for maintenance; It can be conservative and only use a special tile cleaner once a month and rent the electric floor washer with wax on special occasions.

How to Clean after a Work: Complete Manual

How to Clean after a Work: Complete Manual

Did you just do a one-floor renovation and it's all upside down? Have you bought a new apartment and had to install plugs or throw walls? Do not worry more about the cleaning of the work because in this post you will find the solution to all your problems. Continue reading and discover how to clean up after a work to leave your home or premises impeccable.

Grout Cleaner Product

Adapting to the new environment will be very easy after an urgent cleaning. In any case, if you see that it will be a lot of work, having the services of a cleaning company can be very useful for you to feel your new space like the one of a lifetime.

HOW TO MAKE A CLEANING OF WORK
How to prevent stains during a workProtect the windowscreensRemove doorknobs and door handlesHow to approach the cleaning of the perfect workDo not suffice with one pass to clean everythingPerform the cleanliness of the work ourselvesChoose the specialized productsHelp us from the technologyRelicate the cleaning machinesCurchasing cleaning professionals of worksAdvantages of hiring a cleaning companyThe budget of cleaning workThe cleaning process of a work

How to prevent stains during a work
How to prevent is always better than cure, a good way to save work in the cleaning of work is to take certain preventive measures. After the reform we will have to clean up in any case, but if we organize ourselves well, we can do it efficiently.

Protects windows from windows
Before beginning the renovation, you can place masking tape on the fences, so that the paint does not reach the glass. In addition, you can apply a layer of hot vinegar to prevent it from sticking. This will greatly facilitate the final cleaning after the work.

Remove knobs and door handles
The cleaning of homes will be easier if we remove the knobs before starting the work, since, being metallic, the cleaning of the paint can be complicated. If we keep them, we avoid staining them and we help the doors to be painted better. Remember to place them next to their corresponding screws and pieces.

How to tackle the cleanliness of the perfect work
On many occasions the cleaning of the work is a big challenge because the new materials and, above all, the recent construction, also require different treatments of the dice until now. It is an important investment not only of time but of money.

Cleaning the dust that remains after an integral reform can be very annoying, we can even think that it will never disappear. Despite the care and precautions that workers take to try to stain as little as possible, the soil is usually the most dirty area during a work, so carry out a cleaning of the floor will be one of the priority tasks during cleaning working.

Stains of paint, varnish, cement or plaster are the most frequent and, to treat them, each of them requires the use of a product with certain properties.

One pass will not suffice to clean everything
We must get used to the idea from the beginning that with a single floor cleaning session we will leave our home in conditions, since it requires several.

To resort to a specialized company that offers a cleaning service can be the definitive option for a perfect finish. A contract will save us a lot of time because it has machinery and professional tools. In this case, with a day of cleaning the work if we can finish all the dirt in a deep and uncomplicated way, having some finishes that in some occasions only specific machinery of cleaning work can achieve.

Perform the cleaning of the work ourselves
This is, without a doubt, the most economical option but also the most laborious one. We will need several weeks to clean the building and leave our house in perfect condition. In addition, we will need to rent specific utensils that allow us to eliminate dust, soil stains, glass paint and impurities from plugs and radiators. The most important thing is to choose the right product for each spot and surface, and be very careful following the instructions for each one.

One of the most important tricks is to avoid the accumulation of dirt. If we are going to stay in our home during the work, we should remove as much as possible of dirt after each day. If, on the contrary, we are going to be out, it is advisable to do it on weekends, since the workers will not find themselves working and it will be easier for us to carry out the cleaning of the work.

Choose specialized products
We must know that for each surface and material there are specific products to perform efficiently the cleaning of work, and we must use with special care when the material or object covered with dirt is to be released.



To remove complicated remains such as cement or plaster, we can find products indicated only for this purpose, such as removers.

With paint, which is usually the most common element to clean, you can use generic acetone, but not to eliminate it completely can damage the surface. Therefore, we must resort to solvents that respect the materials.

To remove stains of cement, plaster, calcareous residues or rust from surfaces such as floors, bricks or tiles, which are resistant to the most aggressive products, there are several suitable chemicals. Acid strippers, removers, antiscale or descalers are ideal products for this task.

How to clean stoneware floors or the concern to clean porcelain floors after a work, may be other questions that arise us usually. You have to act in a similar way depending on the material (parquet, tiles, marble ...): the first thing is to detect the type of soil and then apply the specific cleaner for each one only where we find spots, not in a generalized way during cleaning. work.

Help us with technology
When it is not enough that we apply the corresponding chemical products and use the machines that we have at our disposal at home, the rental option is presented as an adequate alternative. These machines are industrial power vacuum cleaners, floor polishers or high pressure cleaners. With them we will achieve a professional result after cleaning the work, although it is advisable to have adequate prior knowledge of its management. We must resort to them when the dirt or stain is very impregnated or because there is a lot of surface to clean.

As in the case of the products explained above, in this case we must also take into account the type of dirt and the surface where we want to eliminate it.

If what we want is to eliminate the dust of floors with a rough surface or large outdoor areas, automatic brooms are a good ally, but if it is smooth floors is enough with a normal vacuum cleaner. If, on the other hand, it is waste whose size is larger than dust, such as small stones, papers or even remains of nails or cables, it is best to use a high pressure cleaner (a machine for cleaning surfaces with a high pressure water jet) or a semi-professional broom.

If it is about stains that are not embedded in the ground, we can obtain very good results if we pass a rotating machine. To the narrow places to which we could not access with the previous ones, we can get well with a water aspirator.

When we persecute to clean the ground, although it is the natural impulse, we should not sweep it. Why? Because we will only transfer dust or debris from one place to another, as well as stay in the air. Instead, we will use a vacuum cleaner with a high efficiency filter. This type of vacuum cleaner allows us to carry out the cleaning of the work efficiently, as they have a great absorption capacity, which is optimal for the dust that remains stuck to the surfaces. We should clean the filter every ten passes, approximately.

You can also use this wireless rechargeable electric floor and carpet brush with numerous features to help with daily cleaning thanks to its versatility.

Rent cleaning machines
If we want to have a more professional result but without resorting to cleaning companies, we can choose to rent these specialized cleaning devices temporarily, as their purchase is not worth it due to its high cost and timely use.

Rental prices vary, especially depending on the type of machine we need and the days we want to hire them. Some of these companies offer discounts the more days they rent. A painter, for example, can be rented for around 5.50 euros a day; a floor polish is achieved between eight 8 and 18 euros; a pressure washer costs about 8 euros; a pipe plunger, 9 euros and a solid vacuum cleaner and water, about 12.50 euros. But much less accessible is to rent a professional sweeper, since the manual style costs 1,000 euros and the driver (battery or gasoline engine) 3,500 euros.

Use professionals in the cleaning of works
Being a work a long process and that ends up exhausting both physically and mentally, what we seek is to be able to enjoy the reform as soon as possible. Therefore, the last thing we need many times is to get ourselves to clean the dirt that has been produced.

That is when we have to seriously consider the possibility of hiring a cleaning company specializing in the cleaning of work, which will guarantee a professional finish.

It is often unknown that office cleaning or industrial cleaning companies offer this service, but it has ended up being the most common.

According to data from the Multisectorial Association of Companies, it is the Community of Madrid that concentrates the largest number of cleaning companies (17%) followed by Catalonia (15%) and Andalusia (14%). And while most of its customers are large companies that require the cleaning of their work centers, more and more individuals are turning to them after a reform at home to clean the work. Therefore, cleaning companies and their prices can be very competitive in cities with so much supply. Hiring a cleaning of floors in Madrid after finishing a work can be very simple with Clean Sil.

Advantages of hiring a cleaning company
The main factor that leads us to rule out a cleaning company too soon is the economic one. But we do not take into account that, in order to carry out this hard work ourselves, in addition to the physical and mental effort, we will need an economic one to use or rent suitable products.

These companies, on the other hand, offer us not only to have these products for their use, (machinery and chemical products) but also labor and extensive experience in the field, which ensures quality and good results in a very short time.

The budget of the cleaning of work
As always in this type of service, the cost is associated with a budget that many times is without commitment. This budget can be calculated even on the website of the companies. The criteria are usually the meters to be cleaned, if it is a single-family house or a flat, if it is a cleaning of newly renovated commercial premises, the amount of dirt accumulated after a work, the days that estimate that they will take to apply the manual of cleaning…

To obtain a budget as reliable as possible, the company and the client agree to a visit so that company technicians come to the place, thus obtaining a personalized cost. In addition, criteria such as the number of windows, the cleaning or not of blinds, the type of painting (to use some products or others, with varying costs), external elements such as viewpoint windows or balconies are taken into account ... For example, If we want to remove dust from a wall with a gotelé, the cost is higher than if it were a smooth wall. The same goes for roofs. It is not the same to carry out a technical roof cleaning than a normal one, of those usually found in homes.

Hiring a company to clean the work of a house of 100 square meters can range between 300 and 500 euros. In return, a team of professionals can clean our house in a single day of eight hours without the need for more passes, something that is considered unthinkable if we were to do it ourselves.

The process of cleaning a work
During the process, companies often allow customers to be present, thus justifying the hours of work employed, also creating a relationship of trust between the client and the company. It is also useful if we want to specify that more emphasis be placed on one area or another. It also helps us indicate which areas we consider particularly sensitive, although the company's experience will not make it necessary.

In any case, it will be necessary for the client to verify that it has been cleaned correctly and not superficially, since the objective of investing in this contract is, precisely, cleaning in depth in a few hours.

In short, if we want that the cleaning of our house does not involve an extension of the tedious reform, our best solution is to take advantage of the professionals who assure us a good service and with guarantees, since this way we will not have done one more expense but an investment in health and time.

And you, you know how to perform a cleaning of work? If you have any questions leave us a comment or contact us and we will help you in everything you need with in-depth cleaning after a reform.

How to Clean Concrete Floors

How to Clean Concrete Floors

The cleaning of outdoor concrete floors is very different from that of concrete floors for interiors. Here we explain how to remove dirt and mildew without damaging your concrete floors.

Concrete is a resistant material for interior and exterior floors. It is durable, easy to clean and quite resistant to stains. However, the concrete gets stained. It is porous and will absorb dirt, spills and mold. No matter how hard the concrete is, you will need periodic scrubbing. So here we will tell you how to clean the concrete, both indoors and outdoors.

Grout Cleaner Product

You may be interested: How to Clean a Cork Floor

A pressure washer is the easiest way to clean outdoor concrete. You must be able to remove dirt, mildew and dirt in an afternoon. The well-known Karcher brand is the ideal solution, of course you should read the instructions on how to use the machine before starting. Spray the surface of the patio with a detergent and use a stiff brush to scrub it in the concrete. Never use a metal bristle brush. Metal fibers and rust can get trapped in the porous surface of the concrete. Put on safety glasses and gloves. Turn on the pressure washer. Move the wand on one side, using the same movement you would do if you were mopping a floor.

Do you want to know how to remove concrete stains? There are several options. You can use chlorine, ammonia (Note: never mix the two) and other commercial solutions. To obtain a natural solution for difficult stains on concrete floors, mix flour and hydrogen peroxide in a paste with the consistency of peanut butter. Spread it over the stained area. Let rest during the night. Then, scrape with a scraper tool with plastic edges.

Trisodium phosphate (TSP) mixed with water and rubbed on the stained area with a nylon bristle brush can remove stubborn stains. Rub until the stain is gone and rinse with a hose. TSP you can buy it by going to the following link https://amzn.to/2JGvwzF.

Muriatic acid can be used on outdoor floors to clean the most difficult stains, such as rust or dry grout. It is a powerful and toxic material that must be used with extreme caution. Wear glasses and protective gloves when you use it and be sure to follow the manufacturer's instructions on how to clean the concrete with muriatic acid.

For polished or patterned interior concrete floors, you should take a gentler approach to how to clean the concrete. You will only use a mop and a bucket of water mixed with a mild cleanser. Do not use ammonia, bleach or any highly acid substance on polished or patterned floors. Some good cleaners include Castile soap, liquid dishwashing detergent, stone cleaners, and mild floor cleaners. Mix a solution, apply to the floor with a wet mop and then rinse with a mop with clean water.


How to Clean Concrete Floors To make your concrete floors resistant to future stains, apply a concrete sealer. Use a paint roller to apply on clean, primed concrete. Start at the center of the area and move the sealant to the edges. Floors should be sealed every two or three years. Knowing how to properly clean the concrete will keep the floors in your garage, workshop and house as new.

How to clean the floor joints without effort

How to clean the floor joints without effort

Blanching the joints of the floor is not always easy, although there are different methods to restore the pavement's splendor
The bathroom or the kitchen are rooms where cleanliness is, more than a recommendation, an obligation. Keeping both rooms in perfect state of review means that each of the elements that are part of the composition look unpolluted. In this sense, whitening the joints of the floor is an indispensable task to achieve that harmony of the whole, something that, in any case, you can move to any other room in the house. It is not enough just to clean the tiles with soap and water, a task that, on the other hand, should be done frequently to minimize the possible wear of the joints. In practice, paying attention to the joints of each piece is essential to achieve that feeling of neatness.

Grout Cleaner Product

But how to clean the joints of the floor? Issues such as the material or the degree of deterioration of the same can give you an idea of ​​what is the best alternative but, in general, the most common is having to face the task in soil stoneware or porcelain floor. Resorting to professional cleaning services is the best guarantee of success in the task. However, you can always start by putting into practice certain recommendations that will help you maintain the floors of your kitchen or bathroom as the first day.

How to clean the joints of the floor with chemical products
Household tasks involve, in many cases, the need to use chemical solutions capable of recovering the properties of the surfaces on which they act. In the market, there are different products that can help you whiten the joints of the kitchen or bathroom floor without too much effort. Before deciding on one or the other, you should consult an expert and it is that applying an inappropriate product can have catastrophic effects on your tiles.

In any case, once the product in question has been chosen, the first step is to prepare the surface by sweeping and scrubbing with water and bleach to eliminate surface dirt. Let it dry completely before undertaking the task of bleaching the joints of the floor, a task for which, only, you will have to follow the instructions of the manufacturer applying the product following the line of the joints and leaving it to act.

After the recommended time (usually 20 or 25 minutes), scrub the surface again with hot water. This way you will be able to soften the remains of the product and completely clean the surface of the tiles of your stoneware or porcelain floor.

Homemade tricks to whiten the joints of the floor
Who said that popular wisdom could not answer the question of how to clean the joints of the floor? Home remedies are great allies in housework although you have to be careful, especially depending on the materials. In general, the traditional recipes suitable for most surfaces are:

- Baking soda:
The same unclog pipes, serves to whiten the joints of the floor and is that, the bicarbonate is a perfect ingredient for cleaning the home. In the case of kitchen and bathroom, more specifically, of the joints of the floor, its application is as simple as preparing a basin of hot water and getting a can of baking soda.

Moisten the surface and then sprinkle the baking soda. As in the case of chemical whiteners, you have to let it work, at least ten minutes and then remove the mixture with a mop or cloth. The results are immediate. Some people also bet on the use of vinegar or the combination of both, for tastes, colors.

- Bleach or ammonia:
They are not natural remedies, although they are traditional. Both bleach and ammonia (always separately!) Can help you clean the floor joints effectively. Once you have chosen the least aggressive product for your stoneware or porcelain floor, it will be enough to apply it on the joints, let it act for fifteen minutes, scrub it with a brush and remove it with hot water.

The value of professional work
While it is true that whitewashing the joints of the floor can be a task to undertake without effort, it is also true that, sometimes, it is titanic. The ravages caused by the use or the passage of time can make the appearance of your tiles and their joints in something difficult to recover and resort to professional cleaning services will save you time, effort and, probably, even money.

There are even times when it is difficult to bleach the joints of the floor and the solution, in these cases, goes directly to replace them. Apply a new tile grout, that is, renew the joints of your tiles, requires certain knowledge and attention so, entrust the task to an expert is not too much. In any case, if you are determined to test your nature of 'hands' at home, you will have to remove the previous grout with care to avoid damaging the tiles, clean the surface, apply the mixture and, once dry, return to clean to achieve the desired finishes.

How to remove dry grout

How to remove dry grout

 How to remove dry grout in tiles. We've tried everything from vinegar to tile cleaner, but nothing works.

Any suggestions?

Answers

Steve Jackson

Your options at this point are to scrape it or dissolve it. My first suggestion would be to contact the tile manufacturer. They Would have the best idea of what their tile can handle in terms of physical or acid abuse.

Grout Cleaner Product

Scraping

The scraping is attractive as a primary option because it can go slowly and start in a small and little visible area to see if it damages the tile. There Is no perfect tool for this for what I know. It Would start with an abrasive sponge (might be lucky), steel wool (good for stripes) and then attack the groups with a razor, a painter's tool or a small sharp chisel. To limit the damage to the tile, you want the tool to be as horizontal as you can and still work safely with it. You should quickly determine how much abuse your tile can handle and if some scratches ruin your floor. It is likely to be a slow and painful process.

Acid

Sulfuric acid will work if the grout is not too thick, the main concern is what to do with the tile underneath. Again, find a small place to try first. The engraving is usually caused because the tile absorbs the acid. To limit this, I would first wet the tile pretty well with clean water. Gloves, mask and good ventilation are essential when working with acid. If the grout is thick enough, it may loosen it sufficiently so you can clean it with a scraping method. Follow the instructions and don't let it rest long enough to pass through the top layer of tiles.

Replacement

I wouldn't overlook the replacement as a possibility, depending on how many tesserae are a problem. It is totally possible to damage the tile when trying to remove the grout anyway. I guess he did the work of the tiles (or I should call the contractor to fix this problem), so he should be able to replace a tile, just smash it, scrape the surrounding grout and install a new one. If it's an old job (and you can find the matching tiles), it may be worth making some calls to find what a tile mechanic could charge for a small job.

BrianK

Are glazed tiles or something like Spanish tiles without enamelling? If they are glazed, they will test a razor blade scraper or a wallpaper scraper. Try to moisten it first. I've heard about people who use acid, but I see some forums where people never say to use it because they can record the tile. If only a couple of days have passed, it should be detached from the glazed tiles. You Can also post a photo. Good luck,

Brian
Bob Arnold

My wife dropped a bottle full of balsamic vinegar on the kitchen floor. He immediately attacked the white tile grout and, when the mess was cleaned, most of the tile grout had disappeared. Balsamic vinegar was blackish in color and white tiles were not affected at all.
Matthew
-1 great story, Bro... Can you adjust your answer to more specifically address the question?

How to clean ceramic wall tiles

How to clean ceramic wall tiles

How to clean ceramic wall tiles ceramic tiles are used in many other types of surfaces, as well as on the floor. Ceramic tiles are often installed on walls and on many other vertical surfaces. The most common area for ceramic tile to be installed is in a shower or bathtub enclosure. Ceramic tiles are also installed in many bathrooms and offer a somewhat hygienic surface that does not stain or absorb smells like the normal wall can. Cleaning ceramic tiles is harder than cleaning common tiles for a simple reason. Cleaning chemicals will not settle and inhabit the surface as easily as they will when applied to floors.

Grout Cleaner Product

Cleaners should be allowed to react with dirt, stains and contaminants so that dirt and contaminants can be removed from the surface of the tile and grout. When cleaning any vertical surface, all the delicate surfaces below and beside the vertical surface to be cleaned must be protected from the cleaning chemicals that will be used. The floors of wood, carpets, laminate flooring, delicate and many other objects surrounding them can be damaged by chemical cleaning products. Sometimes, acid cleaners will work to make the grout cleaner than when using ordinary chemicals for cleaning alkaline tiles. You can spray an acid cleaner directly onto the ceramic tile and shake it on the grout with a toothbrush to scrub. Then a brush scrubbing steeped in hot water to rinse the excess acid cleaner of tiles and Grout can be used.

Spray the acid cleaner on the ceramic tiles of the wall in this way will prevent any excess of acid cleaning chemicals to flow downward vertical tiles and damage underlying surfaces. The use of acid cleaning products requires great care because they can stain carpets and can also record any stainless steel surface that come into contact.

Canvases work well to protect the underlying surface and also to absorb small amounts of cleaning chemicals so they don't seep into the bottom surfaces. Difficult to clean ceramic tiles is how the cleaning chemicals in dirty and Grout ceramic tiles to keep cleaning products to do their job. To clean the tiles of ceramic wall, a sponge for scrubbing soft works best to apply the cleaning chemicals. The sponge will contain a large volume of cleaning chemicals and can use the side of sponge scouring scrubbing to shake the tiles and Grout from ceramic. You should only clean small areas of ceramic tiles at the same time for cleaning chemicals stay in constant contact with area that is cleaned. In general, it will take more time and energy scrubbing the grout for grout as clean as possible.

After a section of the ceramic tile and Grout Cleaning, thoroughly rinse the area of tile and Grout cleaned so there are no remains of cleaner in the tile and grout. Ceramic tiles are extremely dense and hard tile and you can not damage them with most types of acidic and alkaline cleaners.

How to clean glazed tiles

How to clean glazed tiles

In the market we can find two kinds of tiles: glazed and without unglazed. The glazes are harder, but they scratch easily. On the other hand, the surface tiles without unglazed absorb the cleaning products. The white cement used in the joints is porous and retains moisture and mildew.

Grout Cleaner Product

For periodic cleaning of glazed tiles, the most common in kitchens and bathrooms, use a non-abrasive spray cleaner. The glass cleaner produces a good finish, but it avoids the intense colors because they can dye the porous joints.

Heavily soiled glazed tile

Heavily soiled tiles require larger caliber weapons: cream cleaner or scouring powders. If it is a countertop or shower wall, apply a thin layer of cleanser containing whitening agent and water and wait 15 minutes to several hours before rinsing. Rinse with plenty of water and dry with a rag.

Clean the tiles in a fast and efficient way

First, start by removing dust from the walls with a soft cloth. Then, fill a bucket with warm water and add a drizzle of neutral cleanser in one of them. If the walls are very dirty you can forget about the cube and opt for a product in degreasing spray.

Action time: Moisten a cloth in the soapy water cube and rub the wall. With a soft cloth moistened with water rinse. You can use a soft toothbrush to remove dirt from the union of the tiles, but do not pass or remove the white cement grout too! Finally, dry the tiles with a clean cloth.

And the tiles without unglazed?

Clean tile without unglazed with a natural sponge just moistened in a water solution and non-soapy detergent or commercial cleaner. Avoid acidic cleansers, such as vinegar, on glazed surfaces. The acid attacks the joints and undos them. Forget the metal scourer as it scratches the tile surface.

Cleaning of marble, ceramic and slate floors

Cleaning of marble, ceramic and slate floors

Proper care of your soil prevents damage, prolongs its useful life and keeps it looking new for years. How is the soil properly cared for?

If you like to walk barefoot or even if you don't, leave your shoes at the door. Why are you taking off your shoes? If you have a rough board that needs to be straightened, use a sandpaper to do so. Guess what's on the sole of your shoes? Sand and dirt wear the surface of your soil causing premature death.

Grout Cleaner Product

A closer look on the soles of those shoes and you will find oil, dirt and even scraps of dog poo. No wonder his soils refuse to be clean. Wear slippers or socks inside the house. The fat in the soles of the feet also soil the surface.

•     Always vacuum or clean the floor surfaces before scrubbing.

Marble Floors

Use only warm water on marble floors. Mild vinegar acid damages marblesurfaces. Once again, drain all excess moisture from a towel or wet mop. Immediately afterwards, with a dry towel. They always dry the marble floors, they are easily stained.

Ceramic tile

Clean tiles or ceramic tiles with lukewarm water only.
Prevention becomes essential with these soil surfaces.
Regularly apply a sealant found in ceramic tile and tile stores for slate, tile, and especially grout.
Clean spills immediately.

How to clean the joints of the floor and skirting boards? 5 infallible tricks

How to clean the joints of the floor and skirting boards? 5 infallible tricks

Cleaning the joints on the floor is one of the tasks that headaches can create. Dirt from the street or dust that accumulates in the houses makes the joints of the floors usually lose their whiteness easily. Thus, for example in the cleaning of ceramic floors, pay close attention to the materials and techniques used to remove dirt from the joints or plinths without damaging the properties of the ceramics.

Grout Cleaner Product

When we regularly clean the soil joints using the best products and techniques we will be able to keep our tiles in perfect condition for longer. Therefore, there will be no need for frequent repairs or replacements that are a big outlay of money.

If you want to know how you can clean the joints of the ground or plinths to obtain a perfect result in a short time, pay close attention to the 5 tricks that we propose below in this article.

1. Whitening soil joints with chemicals

The passage of time and the continued use, especially of the bathrooms and the kitchens, make the joints of the ground become dirty at a high speed.

We often consider how we can return whiteness to the tile joints to make the floors look like new again.

One of the answers to that question is through the use of products destined to it as the Green forest gasket bleach or the Baldosinín.

These products are very easy to use and provide great results in a few minutes.
How to whiten joints step by step?

•     Before using any of the two products above it is important to freguemos the soil well with water and a little bleach.
•     In this way we will be able to remove the dirt more superficial and disinfect to clean the joints of the ground perfectly.
•     It is important that we let the floor dry completely so that there is no moisture or bleach residue.
•     Afterwards, the specific product must be applied to whiten the ground joints with the sponges or brushes that they include.
•     The best way to apply these products is to shake them and give them on the joints forming lines.
•     These bleaches should then be allowed to dry approximately 20 minutes to make them truly effective.
•     These products usually have very strong active components, so it is necessary that the tiles are scrubbed with clean and very hot water.
•     Thus, we will be able to soften the product that has been distributed on the platelets and remove it easily.
•     These products are used to clean the joints of the kitchen tile, bathroom or other rooms, as well as the plinths.

2. Cleaning of floor gaskets with sponge and bicarbonate

One of the most common ways to clean the joints of the floor is through bicarbonate applied with a sponge.

In this case, the first thing you need to do is to wet the surface that we want to clean with abundant water.

How to clean the gaskets with bicarbonate?

•     We must use a basin with hot water in which we add bicarbonate that we will apply on the ground with a sponge.
•     It is very likely that after a few minutes we see how they start to stay whiter.
•     If we want to deepen the cleaning we can use a bristle brush or small teeth and rub vigorously on the joints of the ground.
•     Remove any dirt that appears or the remaining product with a cloth, which will serve to dry any moisture that may cause mildew or attract insects.
•     When using products containing bicarbonate or chemicals it is advisable to always wear gloves to protect your hands.
•     Also avoid direct contact with the eyes. If on occasion we forget this step we can have irritations.

3. Whitening Grout Joints

This option is the most effective, but also the most drastic of all and requires a little more time than the previous two. It is basically to give a layer of grout to all the joints again. With this we will get them to whiten again and acquire their original color.
How to apply grout to soil joints?

The best way to apply a new grout is through the following steps:

•     Gently remove the old grout with a small chisel. When we do this action it is very important that we pay attention and care so as not to damage the floor tiles and that we have to repair or replace any part of it.
•     Clean the debris that appears and the dust: After removing the old grout there will be a lot of debris and dust that we have to clean as soon as possible. Before starting to pour a new grout the surface must be absolutely perfect.
•     Prepare the product following each and every one of the manufacturer's instructions.
•     Apply the product on the joints with a spatula.
•     Use a damp sponge to finish the cleaning process.
•     Use a sealant or grout protector to protect moisture seals that usually appear in bathrooms and kitchens.

4. Clean floor gaskets with brush and etching

Bleaching of the ground joints can also be done with a brush and etching. The first thing to do is to use all the tiles with water preferably hot. Then we have to pour the etching on the joints and wait several minutes to see how a foam forms.

After passing between 5-10 minutes we have to rub each of the joints with a toothbrush energetically, and then rinse them with water until the etching is completely eliminated.

When we do this type of cleaning it is necessary to protect itself with gloves, mask and eye glasses, since the most recommended etching is the hydrochloric acid that can cause us serious damage if we do not protect ourselves well.

However, with the passage of time and when using it repeatedly, the hydrochloric acid deteriorates the grout. Therefore, it is recommended that you use etching to clean the soil joints sporadically.

5. Hires the services of companies specializing in cleaning soil joints

Cleaning the ground joints requires specific knowledge and time to be able to carry it out. Daily duties make our time unlimited the vast majority of times, and therefore the best solution is to hire cleaning companies.

The main advantages of having the help of this type of companies are:

•     Practicality
•     Time Savings
•     Saving money
•     Tranquility

What should we know when hiring a floor cleaning company?

•     It is important that we always choose companies that have several years of experience and good reviews.
•     One of the most useful ways to find reliable companies is by asking our acquaintances.
•     In addition, we can search the Internet for cleaning and maintenance service companies.
•     When you have drawn up a list of two or three service companies ask for free budgets to compare.
•     Choose the one that best suits your needs.
•     Doubt those companies that do not offer you detailed budget with materials and techniques, as well as those that offer very low budgets.
•     In the Dimasplus Cleaning Company We know how to clean floor gaskets to get the best results.

At Dimasplus we are able to provide cleaning and maintenance services in any type of space.

All our workers are formed in order to be able to develop their work in the best possible way in the shortest time.

The main services offered by Dimasplus are:

•     Floor Cleaning
•       Office Cleaning in Madrid
•     Deep Cleaning of premises , household cleaning
•     Clean Crystals
•     Cleaning up Neighborhood Communities.

An in-depth cleaning is always vital to achieve order and balance in our homes.

Because of this, the hiring of cleaning and maintenance services is becoming more common.

Polluting factors generate large amounts of dirt that create discomfort and disorganization in households or businesses.

Training on how to clean grout

Training on how to clean grout

Grout is a fine mortar that you put between tiles for paving and counterwork to keep in place. This glue-like padding is often found in bathrooms and kitchens. Whether on the shower walls or on the kitchen floor, grout may be discolored over time as dirt accumulates in it or mildew grows. Discoloration of grout may be unsightly. Fortunately, you can clean the grout using various methods.

Grout Cleaner Product

Instructions
Cleaning steam

• Place water in the steam cleaning unit.

• Turn the steam on and let the water heat up.

• Use steamer grout attachment. Usually these look like long wands. Press the attachment against the grout line and move down the line, the steam trigger as you go. This will release the stains on the grout.

• Use an old rag to clean excess moisture and dirt that releases steam from grout.

Oxygen Whitener

• Mix together one part oxygen bleaching with two parts warm water. You want to dissolve the oxygen bleach in the water to create the cleaning solution. You can find oxygen-whitening products at your local grocery store.

• Apply your oxygen-whitening solution directly to the mouthpiece. You want enough so that the grout is completely soaked. If the grout absorbs the solution, add more until there is a permanent puddle of the VAC.

• Leave the VAC to soak for 30 minutes at one hour.

• Use an old brush or toothbrush to rub the mixture into the mouthpiece after the time has passed.

• Use a mop to wipe away the oxygen bleach solution. Rinse the area with clean water if necessary and allow your grout to dry clean.

Sodium bicarbonate

• Place 1/2 cup of baking soda, 1/4 cup distilled white vinegar, 1/3 cup ammonia and 7 cups tap water temperature in a large container, sealable. Mix well to combine and dissolve sodium bicarbonate.

Radius of the baking soda mixture into a spray bottle. The remaining cleaner can be stored in the sealable container for future cleaning.

• Spray your grout with the baking soda mixture to completely saturate the area.

• Allow mixture for 15 minutes. Then clean the grout using a damp cloth or sponge.

Tips and warnings

•     If all else fails, you can buy a grout dye from your local home improvement store. Using the stain stain the grout a deeper color. This hides the discoloration of the stained grout.
•     Never mix chemicals, especially ammonia and bleach.
•     When using any cleaning product, make sure the room is well ventilated to prevent respiratory irritation.

The best way to clean grout in ceramic tiles

The best way to clean grout in ceramic tiles

Cleaning the ceramic tile is quite easy, but you can still get the grout dirty. The sandy, porous nature of grout makes cleaning a little more difficult. Your ceramic tile grout is simply dirty or serious stains, it is important to clean it to prevent the entire surface from ceramic tiles well. The best way to clean ceramic tile grout is an environmentally friendly product that will remove stains without damaging the surrounding tiles.

Grout Cleaner Product

Instructions

• Sweep the entire surface with a broom or vacuum cleaner hose to remove dust, debris, and loose soil.

• Fill a clean, empty bucket with an oxygen and warm water bleach solution. The ratio of oxygen-to-water bleach can vary between products depending on the concentration of percarbonate, but in general we will use 4 to 8 ounces of bleach per gallon of water with oxygen.

• DIP a mop or rag into the oxygen Bleach solution cube. Apply solution abundantly to grout. Let the cleaning mix stand for about 30 minutes in the grout of the ceramic tile.

• Scrub Grout lines with an old toothbrush or brush nozzle. If the oxygen bleach mixture has completely soaked in the grout and dries after 30 minutes, apply more of the solution before scrubbing.

• Soak the dirty cleaning solution with a clean mop or rags. Rinse the entire surface of the tiles with a mop or cloth and clean water, then let the air on the surface dry.