Cleaning the joints on the floor is one of the tasks that headaches can create. Dirt from the street or dust that accumulates in the houses makes the joints of the floors usually lose their whiteness easily. Thus, for example in the cleaning of ceramic floors, pay close attention to the materials and techniques used to remove dirt from the joints or plinths without damaging the properties of the ceramics.
When we regularly clean the soil joints using the best products and techniques we will be able to keep our tiles in perfect condition for longer. Therefore, there will be no need for frequent repairs or replacements that are a big outlay of money.
If you want to know how you can clean the joints of the ground or plinths to obtain a perfect result in a short time, pay close attention to the 5 tricks that we propose below in this article.
1. Whitening soil joints with chemicals
The passage of time and the continued use, especially of the bathrooms and the kitchens, make the joints of the ground become dirty at a high speed.
We often consider how we can return whiteness to the tile joints to make the floors look like new again.
One of the answers to that question is through the use of products destined to it as the Green forest gasket bleach or the Baldosinín.
These products are very easy to use and provide great results in a few minutes.
How to whiten joints step by step?
- Before using any of the two products above it is important to freguemos the soil well with water and a little bleach.
- In this way we will be able to remove the dirt more superficial and disinfect to clean the joints of the ground perfectly.
- It is important that we let the floor dry completely so that there is no moisture or bleach residue.
- Afterwards, the specific product must be applied to whiten the ground joints with the sponges or brushes that they include.
- The best way to apply these products is to shake them and give them on the joints forming lines.
- These bleaches should then be allowed to dry approximately 20 minutes to make them truly effective.
- These products usually have very strong active components, so it is necessary that the tiles are scrubbed with clean and very hot water.
- Thus, we will be able to soften the product that has been distributed on the platelets and remove it easily.
- These products are used to clean the joints of the kitchen tile, bathroom or other rooms, as well as the plinths.
2. Cleaning of floor gaskets with sponge and bicarbonate
One of the most common ways to clean the joints of the floor is through bicarbonate applied with a sponge.
In this case, the first thing you need to do is to wet the surface that we want to clean with abundant water.
How to clean the gaskets with bicarbonate?
- We must use a basin with hot water in which we add bicarbonate that we will apply on the ground with a sponge.
- It is very likely that after a few minutes we see how they start to stay whiter.
- If we want to deepen the cleaning we can use a bristle brush or small teeth and rub vigorously on the joints of the ground.
- Remove any dirt that appears or the remaining product with a cloth, which will serve to dry any moisture that may cause mildew or attract insects.
- When using products containing bicarbonate or chemicals it is advisable to always wear gloves to protect your hands.
- Also avoid direct contact with the eyes. If on occasion we forget this step we can have irritations.
3. Whitening Grout Joints
This option is the most effective, but also the most drastic of all and requires a little more time than the previous two. It is basically to give a layer of grout to all the joints again. With this we will get them to whiten again and acquire their original color.
How to apply grout to soil joints?
The best way to apply a new grout is through the following steps:
- Gently remove the old grout with a small chisel. When we do this action it is very important that we pay attention and care so as not to damage the floor tiles and that we have to repair or replace any part of it.
- Clean the debris that appears and the dust: After removing the old grout there will be a lot of debris and dust that we have to clean as soon as possible. Before starting to pour a new grout the surface must be absolutely perfect.
- Prepare the product following each and every one of the manufacturer's instructions.
- Apply the product on the joints with a spatula.
- Use a damp sponge to finish the cleaning process.
- Use a sealant or grout protector to protect moisture seals that usually appear in bathrooms and kitchens.
4. Clean floor gaskets with brush and etching
Bleaching of the ground joints can also be done with a brush and etching. The first thing to do is to use all the tiles with water preferably hot. Then we have to pour the etching on the joints and wait several minutes to see how a foam forms.
After passing between 5-10 minutes we have to rub each of the joints with a toothbrush energetically, and then rinse them with water until the etching is completely eliminated.
When we do this type of cleaning it is necessary to protect itself with gloves, mask and eye glasses, since the most recommended etching is the hydrochloric acid that can cause us serious damage if we do not protect ourselves well.
However, with the passage of time and when using it repeatedly, the hydrochloric acid deteriorates the grout. Therefore, it is recommended that you use etching to clean the soil joints sporadically.
5. Hires the services of companies specializing in cleaning soil joints
Cleaning the ground joints requires specific knowledge and time to be able to carry it out. Daily duties make our time unlimited the vast majority of times, and therefore the best solution is to hire cleaning companies.
The main advantages of having the help of this type of companies are:
- Practicality
- Time Savings
- Saving money
- Tranquility
What should we know when hiring a floor cleaning company?
- It is important that we always choose companies that have several years of experience and good reviews.
- One of the most useful ways to find reliable companies is by asking our acquaintances.
- In addition, we can search the Internet for cleaning and maintenance service companies.
- When you have drawn up a list of two or three service companies ask for free budgets to compare.
- Choose the one that best suits your needs.
- Doubt those companies that do not offer you detailed budget with materials and techniques, as well as those that offer very low budgets.
- In the Dimasplus Cleaning Company We know how to clean floor gaskets to get the best results.
At Dimasplus we are able to provide cleaning and maintenance services in any type of space.
All our workers are formed in order to be able to develop their work in the best possible way in the shortest time.
The main services offered by Dimasplus are:
- Floor Cleaning
- Office Cleaning in Madrid
- Deep Cleaning of premises , household cleaning
- Clean Crystals
- Cleaning up Neighborhood Communities.
An in-depth cleaning is always vital to achieve order and balance in our homes.
Because of this, the hiring of cleaning and maintenance services is becoming more common.
Polluting factors generate large amounts of dirt that create discomfort and disorganization in households or businesses.