Wednesday, June 5, 2019

Swiffer Sweeper Extra Large Dry Mop Refills for Floor Mopping and Cleaning, All Purpose Floor Cleaning Product, Unscented, 19 Count



Swiffer Sweeper Extra Large Dry Mop Refills for Floor Mopping and Cleaning, All Purpose Floor Cleaning Product, Unscented, 19 Count


Swiffer Sweeper Extra Large Dry Mop Refills for Floor Mopping and Cleaning, All Purpose Floor Cleaning Product, Unscented, 19 Count


How to wash the floor



Are there traces, crumbs and other dirt on your floor that make your floor look different? This is an article on how to clean the floor so that after that it will creak from cleanliness. But if you do not want to spend your personal time, the cleaning of apartments, performed by our company, will release you from these troubles.

Sequencing
Find out what type of gender you have. In addition to the basic tips - sweeping, vacuuming, mopping, for different types of floors should be used various cleaning products and equipment to avoid damage to them.

Find out the type of floor
Start cleaning the floor in the correct order. In order not to wash up some parts of the floor, it is not necessary to move from the center or from the door. Go from the far corner of the room to the door of it. As a result, you do not have to do extra work.

Wash the floor from the far corner
First, sweep the floor from any major debris, hair and dust. It is important to do this before you start washing the floor to make it easier for you. Also in this step, if desired, you can vacuum all surfaces.

Sweep the floor from trash
Use natural products for washing where possible. For example, for a tile, you can try to dilute ½ cup of baking soda in a bucket of warm water and use this solution for walls and floors. Vinegar is good for wooden floors. Dissolve ¼ cup of white vinegar in 1 liter of water and wash parquet with this solution.

Use natural remedies
Wear gloves and soak a mop in a bucket of warm, soapy water.

Wear gloves
Start cleaning in one direction. Drive the mop gently so as not to contaminate the already cleaned areas and continue walking until you have completely washed the floor.

Wash the floor in one direction
Change water if necessary. If the water begins to turn black, and you see that there is a lot of dirt in it, change the water again and do not forget to add a cleaning agent there. While changing the water, be sure to rinse the mop.

Change the water
Rinse the floor again. By the time you are everywhere washed the floor where they could remain uncleared areas or areas that accidentally polluted again. To remove them, simply wipe these areas with clean water. Or you can take a spray bottle and use it to spray water in the right places. The main thing is not to flood the floor.

Rinse the floor again

Cautions
Water nowadays is quite expensive, try to save water.

Try to use aggressive floor cleaners.

Be careful when washing the floor. Try not to slip and fall.

4A----------------------xx

Lysol Clean & Fresh Multi-Surface Cleaner, Lemon & Sunflower, 120oz (3X40oz)



Lysol Clean & Fresh Multi-Surface Cleaner, Lemon & Sunflower, 120oz (3X40oz)


Lysol Clean & Fresh Multi-Surface Cleaner, Lemon & Sunflower, 120oz (3X40oz)


How to quickly learn how to clean the floors in the house



The content of the article

Universal rules
Floor type
When the repair is finished
Mop or hands?

If you remember yourself in childhood or adolescence, you will understand that the question of how to properly clean floors is not so simple. Initially, nothing really works out, but each time the equipment becomes more perfect and more perfect, and you can already do not only the daily wet cleaning, but also wash the very dirty floors after the repair. Let's take a look at the theory, perhaps it will help us to clean the floor so that it stays clean longer.
Universal rules

There are a few rules that good housewives know about. They help clean up any floor in the house quickly, efficiently and even cope with the effects of repairs. Sometimes they are ignored - but in vain. Practice shows that they really help.

before you wash the floor, you need to remove all unnecessary from it. Carpet is better to roll into a roll so that it does not interfere, chairs and stools, too, need to be raised;
the floor must be vacuumed or swept, while not forgetting to look under the sofa, bed, wardrobe, etc. The dust that accumulates in these hidden places, then will fly out and quickly spoil the order that you restore. So it's in your best interest to get rid of it;
it is best to start washing from the far corner, when viewed from the door. First, wash near the walls and baseboards, and then move closer to the center and then to the exit;
so that there are no stains, you should always wipe the surface well with a pressed cloth or mop, and if necessary, do not be lazy and wash the floors several times.

Floor type

The type of floor is important: it is covered with linoleum or painted, it is parquet, cork or ceramic, wood or concrete. Let's find out how to clean the floors, depending on the base material of the coating.

Parquet can not be wet much. To quickly remove dust, it is vacuumed, swept with a soft brush, or wiped with a damp, strongly wrung mop. For thorough cleaning use special polishing and moisture protection agents.

Laminate also does not like water, although it would be correct to say "some types of laminate." There are waterproof species, but they too can not be poured much water. It is necessary to squeeze the rag well before wiping the floor with it. If you want to thoroughly wash the laminate, you can use liquid soap or a special tool designed for this coating.

Linoleum, tile and painted floor - the most picky flooring. They can be washed with warm water and ordinary detergents, and everything will be fine. The painted floor can be cleaned with a cloth moistened with a weak solution of ammonia. This will add some gloss to the paint.

With special care it is necessary to wash the floors from the cork. Use a soft cloth and non-abrasive cleansers for them.

It is impossible to wet a cork generously, as well as parquet. Sometimes it is better to rub the local pollution with a sponge, and this will be enough.

To wash the wooden unpainted floor, you must use hot water and a stiff brush. Wooden boards can be rubbed with effort, and even bleached.
When the repair is finished

It is most difficult to wash the floor after the repair, because it is difficult to remove stains, stains, whitewash and various debris on it. In order to wash all this, you need to go through at least three stages.

first, wash the floor with plain warm water so that global pollution disappears, and all the stains that have to be wiped off appear;
remove stains after painting, wash away traces of whitewash, glue, putty;
Wipe the floor with a damp cloth, removing the last remaining dirt.

Stains left after painting can be washed in various ways. For each coating, they choose their own method and their means in order not to leave marks on the floor, acting solely on the pollution. Previously, housewives added a little kerosene to the water, and rinsed the floor with water, acidified with vinegar. But today there are many other means, for example, acetone or White spirit. You can try to clean the enamel gently and quickly with a knife.

If the features of the coating allow, the first time you can wet the floor well, so that the traces left after painting can be removed. This will help to clean the paint without any chemicals. Better yet, wet the stain separately several times and rub. The water emulsion will flow away without problems.

It is very difficult to wash the floor after whitewashing, because even a small concentration of chalk leaves white marks. In order to get rid of white stripes and stains after whitewashing, it is necessary to wash the floors several times, changing the water. At the second and third stage, it is necessary to unscrew the cloth well so that the water does not flow into it, and press the mop to the floor, carefully wiping the surface.

Well and quickly helps to get rid of traces of whitewash left after repairs, this is such a popular way. The first time wash away the main layer of dirt, then change the water. Pour salt in clean water. You can pour 3-4 spoons on half a ten-liter bucket. Wash the floor with salt water to clean the white substance that has eaten. Finally, wash the salt with clean water, which add a little vinegar.
Mop or hands?

In public areas, the floors must be washed quickly, so they use mops, washing vacuum cleaners and other special equipment. At home, you have another tool - do it yourself. In what way to wash the floors better, each housewife decides for himself independently. We note only that hand washing is also a kind of exercise. Therefore, if you move a little, you can wipe the floor with your hands without resorting to tools.

Here are some guidelines on how to mop the floor properly.

if you mop the floor, it should be well moistened and the first time slightly wring out. In the place where the pollution is strong, you need to rub it harder, with pressure;
when washing the floor with a texture, for example, a rough tile, make a mop with such movements as if you are drawing a figure eight. This will help to thoroughly clean the dirt from the surface;
after you put things in order, rinse the mop in clean water, squeeze it and put it upside down to dry.

Wait until the surface is completely dry, and only after that you can walk on it, arrange chairs, lay carpets, etc. If you have done everything well, then the next scheduled cleaning will need to be done in a few days.

3A----------------------xx

Bona WM700018159 Cleaner, Hardwood Floor Refill Gallon, 1 gallon/128oz



Bona WM700018159 Cleaner, Hardwood Floor Refill Gallon, 1 gallon/128oz


Bona WM700018159 Cleaner, Hardwood Floor Refill Gallon, 1 gallon/128oz


How to mop the floor



Wood floors are fairly well cleaned with a vacuum cleaner and a broom, but from time to time they still need to be washed to remove stubborn dirt and dust. If you have never done this before, floor cleaning may seem like a tedious task, but in fact it is quite simple and does not require special skills.

Method 1
Training

one
Wash floors no more than once a week. If the floors become very dirty because of the pranks of children, pets, or because they walk a lot on it, you should wash the floors once a week. At the same time, in most cases it is enough to wash the wooden floors about twice a month. [one]
If you wash the floor too often, there may be a sticky residue on it, in which dirt and debris get stuck.
2
If possible, remove the furniture where you are going to mop the floor. Before you begin to wash the floor, remove from the room all the tables, chairs, carpets and other items that can be removed. No need to move large pieces of furniture, such as sofas and bookcases, unless you want to specifically wash the floor under or behind them. [2]
If you need to wipe these items from dust, do it before removing them. Thus, if dust and debris fall from the sofas or bookcases on the floor, you can remove all this before you start washing it.
Do not drag heavy furniture (tables, chairs) on the floor so as not to scratch it.
If you have roommates / flatmates, tell them where you are going to clean the floor so that they will not go there for a while. If you have animals, put them in another room for a while until you are done cleaning.
3
Sweep or vacuum the floor before washing it. A mop doesn’t collect crumbs, hair or other hard rubbish That's why you need to pick up a broom, a regular or a handheld vacuum cleaner and remove it all from the floor. [3]
Hard debris can leave scratches on the floor if you don’t remove it.

Method 2
Mop with rope attachment

one
Type in a bucket of warm water, add detergent. Take a bucket and take enough water into it to immerse the mop part completely. Then pour some dishwashing liquid or apple cider vinegar, bleach, ammonia or other similar detergent into the bucket. As a rule, it is enough to pour about 120 ml of detergent per 4 liters of water. [four]
Before you try any new detergent, carefully read the information on the label to make it exactly fit your floor.
This is not indicated on all bottles, but look for recommendations on the label in what proportion with water you should use this product.
2
Immerse the mop in a bucket of detergent. Dip the mop into the bucket and let it get wet. If the mop is very dry, it may take a few minutes for it to get wet.
You can buy a pile-up mop at almost any hardware store.
3
Raise the mop and allow excess water to drain. As soon as the mop gets wet enough, lift it and hold it over the bucket. Usually a mop takes in much more water than you need, so hold it over a bucket for 2-3 seconds to allow excess water to flow into the bucket. [five]
If you want, you can squeeze the mop to remove excess water.
four
Wash the floor in small areas. To remove as much dirt as possible, move the mop each time to a distance of 10–15 cm. This will distribute the detergent over a larger area of ​​the floor. [6]
If you have a floor with a polyurethane coating, move the mop in the direction of the fibers of the boards. [7]
When washing texture floors, you need to “write out” with the mop small horizontal eights.
five
Move to the door. So you definitely do not step on the newly washed parts of the floor. If you still stepped on the wet floor, walk around this place with a mop again to remove the imprint of your sole.
In narrow aisles (corridor, hallway), first wash the sides and then the center of the aisle.
6
Squeeze the mop when done with cleaning. As soon as you thoroughly clean the floor, take a mop so that it is above the bucket and squeeze the washing head with your hands. keep squeezing the mop until there is almost no water in it. [eight]
Some squeegees and buckets come complete with a wringer that does not need to be squeezed out manually.
7
Mop the floor to remove dirty water. Mop each washed part of the floor 3-4 times. Go too far - and just start smearing dirty water on the floor. After each section, press the mop to remove the water it absorbs. [9]
You may need to repeat these steps several times to completely dry the floors.

Method 3
Mop with a cloth nozzle

one
Wet the mop tip. Take a clean, suitable for the size of the fabric nozzle for a mop. Then rinse the nozzle with warm water to wet. If the fabric gets too much water, just squeeze it. [ten]
If you have a Swiffer Sweeper mop or similar, buy a pack of wet cloth napkins for her.
2
Put on the cloth attachment on the end of the mop. Place the nozzle on the floor so that the fiber part is in contact with the floor. Then push the squeegee handle into the nozzle so that the locks on each side click into place. [eleven]
If you have a Swiffer WetJets mop or similar, you can attach the nozzle to the handle by simply pressing it with your fingers.
3
Spread the detergent on the floor. Take a spray bottle, fill it with detergent diluted in water (dish detergent, bleach, liquid ammonia or apple cider vinegar), then sprinkle the floor not very liberally. [12]
Unless otherwise indicated in the instructions for the product, dilute it in a ratio of 1–2 caps per half liter of water.
Carefully read the instructions for the detergent to make sure that it is suitable for your floors.
four
Mop the floor. Press the mop to the floor and perform simple back and forth movements. Each area of ​​the floor must be wiped several times to remove as much stubborn dirt as possible. [13]
If there are stains on the floor, try washing it with horizontal eights.
It is easier to clean the floor in the direction of the door, so you definitely do not step on the newly washed parts of the floor.
five
Change the cleaning cloths as needed. Unlike conventional mops with a rope attachment, you will need to replace cloth disposable cloths several times during cleaning. You will understand that it is time to change the napkin when the previous one starts leaving behind dirty traces. [14]
If you have a reusable cloth attachment, simply remove it from the mop, rinse it with warm water and put it on the mop again.

Method 4
Completion of cleaning


one
Wash and clean the bucket and mop. If you used a mop with a cloth attachment, remove it and either throw it away (for disposable napkins) or rinse it in hot water with detergent. If you have a regular rope mop, pour the dirty water from the bucket into the toilet and hang or place the mop so that it dries.
This is not necessary, but it would be nice to also rinse the rope mop in clean water and squeeze it well before putting it to the storage place.

2
Let the floor dry. After cleaning, let the floor dry for about half an hour. Optionally, you can open the door to the room and windows in it to speed up the process.
If there are streaks on the floor, remove the remaining water with dry clean wipes.
3
Replace all the furniture. Once the floor is completely dry, return to the place all the items that have been removed before. If necessary, wipe the legs of chairs, tables and other items of furniture with a damp cloth so that there are no traces of dirt and dust on the floor. [15]
Carry and put furniture carefully so as not to scratch and chop the floor.

Warnings

Do not use acidic detergents (for example, vinegar) when washing marble, granite or tile floors.
Never wash wooden floors covered only with wax, as water can penetrate the gaps and damage floors.
2A----------------------xx

Swiffer Wetjet Hardwood Floor Mopping and Cleaning Solution Refills, All Purpose Cleaning Product, Lavender Vanilla and Comfort Scent, 1.25 Liter, 2 Pack



Swiffer Wetjet Hardwood Floor Mopping and Cleaning Solution Refills, All Purpose Cleaning Product, Lavender Vanilla and Comfort Scent, 1.25 Liter, 2 Pack


Swiffer Wetjet Hardwood Floor Mopping and Cleaning Solution Refills, All Purpose Cleaning Product, Lavender Vanilla and Comfort Scent, 1.25 Liter, 2 Pack


How to clean the floors: fast and efficient cleaning



Regular floor cleaning is a guarantee of cleanliness and a reliable way to get rid of harmful germs and dust, providing a pleasant and healthy atmosphere in the house. Well, so that the cleaning does not take too much time and is as efficient as possible, we will tell you how to clean the floors properly.

General recommendations:

Clear the work area. First, remove all unnecessary items from the floor: move the chairs, stools, tables and floor lamps to another room, pick up the garbage. And then, if necessary, sweep the floor.
Add Mr. 2 caps to the water bucket . Proper - floor cleaner that is suitable for all types of coatings, does not require rinsing, leaves no streaks and helps to quickly and effectively cope with dirt and germs, leaving the floor perfectly clean.
Start washing the floor from the farthest corners of the room, gradually moving to the center. The less you walk on the already washed floor, the faster and more efficient the cleaning. As a result, you will only collect the remains of dust and debris in the middle of the room.
If there is too much moisture on the floor after washing, wipe the floor with a dry cloth. This is especially true for laminate and parquet floors.

How to use a mop:

If you want the cleaning to take place faster, and in the process you do not have to bend over once more, choose a convenient mop and learn how to use it properly:

Ideally, the squeegee handle should reach your armpits. This will help you not to strain your back and be less tired.
When washing floors, paint a figure-eight mop to collect all the garbage in the center, rather than smearing it across the surface.
Rinse the mop regularly in a bucket of water with a small amount of Mr. Proper , and then carefully squeeze. The mop should not be too wet, so as not to leave water on the floor, which can damage some coatings.

1A----------------------xx

Monday, June 3, 2019

Saturday, June 1, 2019

Cascade Complete Dishwasher Detergent, Fresh Scent, 43 Count



Cascade Complete Dishwasher Detergent, Fresh Scent, 43 Count
Cascade Complete Dishwasher Detergent, Fresh Scent, 43 Count


How many years can store detergents - before they become dangerous



Some cleaning products and detergents are stored on the shelf for years. Meanwhile, they have their own expiration date, after the expiration of which, at best, they become ineffective.

Many housewives are confident that the means for cleaning and cleaning surfaces can be used after their storage period has passed. This is not entirely true. Firstly, most of the substances that make up detergents lose their properties over time. And secondly, after contact with air, the composition can be oxidized, stratified and modified. The use of such products may be hazardous to health.

We talk about the recommended shelf life of cleaning products that housewives are widely used in everyday life:

Washing powder
It starts to deteriorate six months after opening the package. In closed form can be stored for about 9−12 months.

Washing Capsules
Although most manufacturers claim that capsules with detergent do not have a shelf life, they should be stored for no longer than 15 months - and always in a dry and closed container that guarantees the safety of the polyvinyl shell.

Fabric softener
It begins to deteriorate and delaminate after about 6−12 months. In closed form, it retains its properties for 2–3 years. Manufacturers advise shaking the conditioner bottle before use and removing any lumps.

Crystal (washing) soda
It has no shelf life when stored in a dry container.

Napkins with impregnation
Can be used without restrictions, but after opening the box they quickly lose their flavor. If you use infrequent wipes infrequently, store them in a tightly closed bag.

Bleach
Valid for 12 months from the date of production. Six months after opening the package, the decay process begins - the bleach becomes less effective, but its toxicity does not increase.

If the shelf life of the product has already passed, it can be used, but to achieve a result, more bleach may be required.

Powder Oxygen Bleach
The tool can be used until the powder is damp. He has no expiration date.

Borax (sodium tetraborate)
Manufacturers recommend storing the powder in a dry place. Shelf life is absent.

Castile soap (based on olive oil)
The recommended shelf life of the product is 3 years.

Baking soda
Do not store baking soda for more than 6−12 months from the date of opening of the package.

Vinegar
Does not spoil, does not stratify. According to experts at the Vinegar Institute, "the shelf life of vinegar is almost unlimited."

Hydrogen peroxide (3%)
The period of maximum performance of the tool is about 30−45 days. Can be stored in a dark, cool place for up to six months. After opening the bottle, hydrogen peroxide quickly loses its properties (although the effervescent effect still persists), so it is not recommended to buy large-volume packages. In closed form, you can store up to three years.


Furniture Polish
Shelf life is about two years.

Salt for the dishwasher
The recommended shelf life is about 12-18 months. After a year of use, the tool becomes less effective.

Dishwasher Cleaner
It is stored from 6 to 12 months, but after six months it begins to lose its effectiveness.

Lysol
The solution is recommended to be stored no longer than two years from the date of opening the package. After this period, Lysol can be used, but its effectiveness will not be the same.

Disinfecting Wipes
If the impregnation contains antibiotics, wipes can be used only for a year. Other types of impregnation remain effective for two years.

Wiper
The shelf life of the product is about two years.

Polish for metal surfaces
Depending on the brand, such products can be stored for up to three years. If you notice the appearance of foreign liquid or lumps in the polish, this means that the tool can no longer be used.

51A----------------------------------------B

Seventh Generation Dishwasher Detergent Packs, Fragrance Free, 73 count



Seventh Generation Dishwasher Detergent Packs, Fragrance Free, 73 count
Seventh Generation Dishwasher Detergent Packs, Fragrance Free, 73 count


MEANS FOR THE DISHWASHING MACHINE - CLEAN WARE, BRILLIANT RESULT!



FoodTechInvest offers reliable technologies for the use of professional dishwashing detergents in the dishwasher. Such innovative technologies allow to precisely dose the required amount of highly concentrated detergent, preventing overspending and ensuring the best results at the optimum cost.

WHAT IS IT NECESSARY TO USE THE REMEDY FOR THE DISHWASHING MACHINE?
Means for dishwasher photoTo achieve good results you need to use a complex of detergents for machines for washing dishes.

All facilities for dishwashers can be divided into three groups:

Alkaline dishwashing detergent
Dishwasher
Descalers
WASHING MEANS FOR THE DISHWASHING MACHINE
Alkaline detergents containing surfactants and potassium hydroxide are usually used for washing dishes in a high-quality machine. This combination of components, in combination with hot water, contributes to the best laundering of protein and fatty contaminants. When buying products for the dishwasher, comparing prices, choose products that do not contain phosphates and chlorine.

RINSER FOR DISHWASHING MACHINE
To remove white spots on glass and porcelain dishes after washing, a dishwashing dishwashing detergent should be used with a dishwasher. A rinse is an acidic product that removes excess water hardness and prevents calcium salts from depositing on the surface of the dishes. Rinse accelerates the drying of any tableware, making it shiny. Contains surfactant system (surfactants) to reduce foaming, thereby increasing the efficiency of dishwashers. The rinse reduces scaling on the wall of the dishwasher.

MEANS FOR REMOVAL OF SCALE IN A DISHWASHING MACHINE
During operation of the machine on the internal surfaces and pipelines accumulates scale. The accumulation of scale reduces the effectiveness of washing dishes. The accumulation of calcium salts on the heating elements of the machine increases the energy consumption for heating water, as well as reduces the service life of the heating elements. Acidic agents are used to remove scale. They are applied to the surface of the sprinkler or added directly to the tank of the dishwasher. After removing the scale from the tank, the machine is drained and washed 2-3 times.

DOSING OF DETERGENTS IN THE WASTE WASHING MACHINE
A pump for dispensing photo detergents. For good machine operation and removal of all contaminants it is necessary to constantly maintain the correct concentration of detergent and rinse aid. Installing peristaltic dosing pumps will provide an economical and correct consumption of detergents. When purchasing our funds, we provide metering systems for free rent.

WHERE TO CHOOSE AND BUY DETERGENT FOR THE DISHWASHING MACHINE?
Photo detergents for dishwashersFuedTechInvest company offer a large assortment of detergents for dishwashers, rinses and descalers in bulk from a warehouse in Minsk with the possibility of delivery to any city of the Republic of Belarus.

The cost of the order includes the provision of rental metering pumps for detergents per dishwasher and monthly visits of a service employee.

In our company the most attractive price for all detergents and accessories concern ECOLAB. ECOLAB products are sold by consultants-managers of the company from an office in Minsk.

50A---------xx

Cascade Complete Gel Dishwasher Detergent, Fresh, 75 oz (Packaging May Vary)



Cascade Complete Gel Dishwasher Detergent, Fresh, 75 oz (Packaging May Vary)
Cascade Complete Gel Dishwasher Detergent, Fresh, 75 oz (Packaging May Vary)


Small tips on how to use dishwashers



When choosing a dishwasher, be sure to check with the seller what types of detergents are suitable for it. Remember - correctly selected detergent will extend the life of the equipment and ensure its more efficient operation.
Along with the detergent, use the regeneration salt in each wash cycle, pouring it into the appropriate compartment of the machine in the required quantity. The special ingredients that make up the salt soften the water, helping to avoid spills on the washed dishes and the formation of limescale inside the dishwasher.
In addition, manufacturers of dishwashers to protect against stains and stains on dishes, as well as to speed up its drying, it is recommended to use a rinse. As a rule, this tool is made in the form of a gel, so its consumption is minimal.
Choosing powder as a detergent, pay attention to whether it is completely soluble in water, since even the smallest particles of its sediment can scratch the surface of the dish.
Powder in the dishwasher be sure to fall asleep using a measuring spoon or cap. Measuring the required amount of detergent with each wash cycle, you will reduce its consumption and at the same time ensure the effectiveness of the product use.
Using the detergent tablets, you do not have to measure the amount of detergent every time - the tablet is designed for exactly one cycle of dishwashing. But you should know that in some models of dishwashers, setting the short cycle mode, the tablet may not have time to dissolve to the end. Therefore, it would be better if in such a case in your arsenal there is also a powder detergent.
Do not rush to purchase a 3in1 product, firstly, check if this type of detergent is suitable for your dishwasher model.



Why Bioretto

Giving preference to products brand Bioretto, you make a choice in favor of quality tools that ensure the effective operation of the dishwasher.
The product line of this company includes all products that should be used during each dishwashing cycle, namely: regenerating salt designed to soften tap water and extend the life of the dishwasher, rinse aid, with which stains will not remain on the dishes and calcareous stains, as well as the detergent itself.
It is noteworthy that the latter is produced in the form of powder and tablets, so regardless of the model of your dishwasher, among the range of Bioretto you will definitely find a suitable detergent.
These detergents effectively and gently remove even the most persistent contaminants, disinfect dishes with the help of active oxygen, which is part of them, and also neutralize odors inside the dishwasher and protect it from scale and the formation of corrosion.
Using the powder of the brand in question, in the short cycle mode (half load of PMM) you can save water and the detergent itself by adding only half of its required amount.
Bioretto products are suitable for washing dishes at low and high temperature conditions (35-70 ° C), as well as for use in intensive washing mode (when highly contaminated utensils are subjected to multiple cleaning steps).
The main advantage of products for Bioretto dishwashers is environmental friendliness. Due to the absence of artificial fragrances, improved formula and special components that make up detergents, they do not harm the environment and, in addition, are ideal for washing children's dishes.



Bioretto is safe

Household chemicals - a product that must be safe for both the human body and the environment. Creating products for dishwashers under the brand name Bioretto, we took this into account and therefore our product fully complies with these requirements, as well as all sanitary and epidemiological regulations adopted at the federal level.
Our products do not include active chlorine, phosphates, aggressive surfactants, SLS, SLES, EDTA, DEA, HEDP, NTF, fragrances, dyes and other components that adversely affect human health. Even getting on the skin, the products of Bioretto do not cause its irritation - it is enough just to rinse the place on which the product got running water.
The product under consideration has artificial fragrances and even in cold water it is completely washed off from the surface of glass, ceramic, plastic and metal utensils. That is why in the process of subsequent use of kitchen utensils chemistry does not enter the human body. In addition, the active oxygen in the detergent composition has the property of disinfection, in this regard, the products of the company Bioretto are perfectly suitable for washing children's dishes.
The trademark of our brand is eco-friendly, which means that when it enters the wastewater and soil, it completely disintegrates into safe bioactive substances that return to the natural cycle of nature and contribute to the emergence of a new life.
The carton in which the product is released does not harm the environment either, since the decomposition process of this material is only a few weeks.
By purchasing Bioretto cleaning products, you take care of the health of your family and help preserve the environment.

49A---------xx

Palmolive Eco Gel Dishwasher Detergent, Lemon Splash - 45 Ounce (3 Pack)



Palmolive Eco Gel Dishwasher Detergent, Lemon Splash - 45 Ounce (3 Pack)
Palmolive Eco Gel Dishwasher Detergent, Lemon Splash - 45 Ounce (3 Pack)


Tablets, salt or powder?



Choosing the right dishwashing detergent and efficient dishwasher

Dishwasher firmly enters our home as an indispensable tool in the kitchen. It is convenient and easy to use, it saves water and, most importantly, it allows you to spend time on more interesting things than washing dishes.

There is a huge amount of dishwasher products on the market. Let's see why they are needed and how they differ from each other. All funds are divided into two types:

Detergents - designed directly for washing off dirt from dishes, are available in the form of tablets, powders and gels.
Additives - a variety of tools to improve the quality of washing, and in order for the dishwasher itself to work better.
In Magnet Cosmetic you can buy Finish brand detergents:
Finish Quantum Max Tablets are easy-to-use multifunctional tablets with dishwashing gel with the most powerful formula in the Finish portfolio at the moment. Finish Quantum Max dishwasher tablets fight against any contamination, effectively dissolve grease, leaving the dishes blindingly clean. The Finish Quantum Max tablet consists of several parts: the powder washes off the impurities at the beginning of the cycle, the powerful Powerball with an effective formula copes with difficult impurities in the middle of the washing cycle, and at the end of the cycle, the gel portion of the tablet starts to act as a rinse. In addition, Quantum Max tablets contain the function of salt and protect glassware from corrosion.
Finish All in One Tablets - like Quantum Max, these are multi-functional tablets, all-in-one. They fight against any contamination, effectively dissolve fat. The Finish All in 1 Max tablet contains a powerful Powerball with an effective formula that copes with difficult contaminants (including burnt food) and launders dishes to shine. For best results, Finish All in 1 tablets should be used with salt and rinse aid.
Finish Classic Powder is an economical solution for the cleanliness of your dishes. Finish Classic powder softens and dissolves food stains and helps get rid of food debris. It is convenient to pour the powder using a special cap. You can dose the amount of powder depending on the degree of contamination of your dishes. Finish Classic powder must be used with salt and rinse, as these functions are not contained in the detergent.
In the line of additives for Finish dishwashers, Magnet Cosmetic presents such products:
Finish salt consists of purified salt, specially granulated for use in the dishwasher. In many regions of Russia hard water because of which the dishwasher works worse, a limescale is formed. Finish salt contributes to the proper operation of the dishwasher ion exchanger, thereby helping to soften the water. As a result, the dishwasher works better and washes dishes better.
Rinse Finish. Dishwashing and traces of water droplets may remain on the dishes when washing in the dishwasher. To eliminate the smudges, and also to make the dishes dry faster and better, we recommend adding Finish rinser.
Cleaner Finish. Even if outwardly your dishwasher looks clean, in the process of working on its internal parts, fat and lime deposits accumulate. Finish Cleaner deeply cleans the internal parts of the dishwasher. The formula is a double action: the blue part of the cleaner fights fat residues, and the transparent part helps protect the machine from limescale. Take care of your dishwasher, use Finish cleaner regularly.


48A---------xx

Seventh Generation Ultra Power Plus Dishwasher Detergent Gel, Fresh Citrus Scent, 65 oz



Seventh Generation Ultra Power Plus Dishwasher Detergent Gel, Fresh Citrus Scent, 65 oz
Seventh Generation Ultra Power Plus Dishwasher Detergent Gel, Fresh Citrus Scent, 65 oz


Tips for cleaning and caring for dishwashers



Detergent and rinse

About brand Catalog Online store Service My siemens

Dishwashing results depend on the detergent and rinse you are using. Always use a brand-name cleaner and brand-name rinse for perfect washing and drying results. Regular cleaning agent may not properly clean dishes and cutlery. The use of separate cleaning agents (detergent, rinse aid and salt) will provide better results than the use of combination products (tablets) without salt and rinse aid. The interaction of the components of the individual means provides a smoother surface of the dishes, which contributes to the flow of water. As a rule, if you do not use a rinse, you will not be able to achieve optimal drying results.
Salt and water softener

Use dishwasher salt if the water in your area is "hard", that is, it contains a high concentration of lime, which causes the formation of scale. Before first use, test the water in your area for hardness using test strips. Refer to the water hardness table in the instruction manual to determine if you need salt and how much. Siemens dishwashers are configured to use water with a hardness of 13 ° - 16 °. Your user manual explains how to change these settings. Now set up your dishwasher's internal water softener system. Refer to the water hardness table in the operating instructions for the required settings. Follow the instructions to save your settings.

Refer to the instruction manual to set up a water softener system.

Special salts

In order for the water softener system to work properly, it is necessary to add softening salt to the dishwasher. To load the salt, unscrew the screw cap on the salt container and fill the container with water (this is only necessary when putting the dishwasher in operation for the first time). Fill the container to the top using a funnel. It is full when the water no longer goes down. Tighten the screw cap and turn on the dishwasher or run a cleaning program to make sure that excess salt is removed. Be careful not to fill the salt container with detergent, as this may damage the water softening system.

Refer to the operating instructions for how to load salt.

Rinse

To ensure that the devices do not remain stains, and the glasses were transparent, add a rinse. Open the container by pressing on the lid, then lift the lid. Carefully fill the rinse aid to the maximum level. Then close the lid until it clicks. Over-rinsed rinse should be collected with a cloth so that the next time you wash the dishes do not form too much foam. The amount of rinse aid is adjusted by setting values ​​from 0 to 6. The factory was set to 5. Change the amount of rinse aid only if there are bands on the dishes (set a lower value) or water stains (set a larger value). Adjust following the instructions for use.

Refer to the instruction manual to adjust the level of rinse aid.

Detergent loading

Dishwashing dishes in the dishwasher can use tablets, powders or liquid detergents for the dishwasher, but in no case is it possible to do the dishwashing by hand. Always adjust the dosage of detergent depending on the degree of contamination of the dish. The detergent dosage scale on the container will help you load the right amount of detergent into the machine. Combination tablets, such as "3-in-1", "4-in-1" or "5-in-1" contain detergent, as well as rinse aid, salt substitutes and additional components, such as glass protection or cleaner for stainless become. These combined detergents usually give results only if the degree of water hardness in your area is below 21 ° dH. If the water hardness exceeds 21 ° dH, additional salt and rinse must be added.
Run the first cycle at high temperature

If you followed the instructions, you can now start the first cycle of the dishwasher at a high temperature without dishes. When the cycle ends, your dishwasher will be ready for its first boot.
How to ensure that the dishwasher does not leave pollution

Sometimes problems are easy to solve with some preventative measures. You can also get great results every time, avoiding common mistakes that reduce the quality of your dishwashers. Read tips on how to prevent insufficient washing of dishes and avoid white lime stains on dishes and cutlery, as well as clouding on transparent dishes.
Causes of white lime spots on dishes and cutlery

A. The lid of the detergent container is blocked or not fully open. When you open the lid of the container with detergent, the tablet falls into a special tray of the upper basket and dissolves there. In order for this to occur without problems, no objects should overlap the lid of the detergent container. Place the tablet vertically, not horizontally, to ensure high-quality dishwashing. Place the dishes in accordance with the instructions in the instruction manual.

B. The tablet does not dissolve during the operation of the machine with a short program. Use scouring powder, not pills for short programs. "

See tips on placing dishes in the dishwasher.

Lime stains on dishes or appliance

Make sure that the water hardness setting is correct (and the water hardness does not exceed 50 °). Check the dishwasher softener settings. Please check the salt level and if the salt container lid is properly closed.
After washing, there is dirt on the dishes

A. If dirt has accumulated on the spray arm and / or is clogged, your dishwasher will not be able to completely wash the dishes. Please clean the spray arm.

B. Sometimes after washing, there are leftovers on the dishes. A possible reason may be that the dishes have been pre-cleaned, so the sensor system installs a gentle program. Thus, strong contamination is not removed. Do not rinse dishes, remove only large leftover food and, if available, choose the Eco50 program or an intensive program.
Food remains on the plates after washing

A. The spray beam cannot rotate freely, as they are blocked by the dishes. Please follow the instructions for placing dishes in the dishwasher.

B. The dishes are too tight in the basket, so not all dishes are cleaned during the washing process. There are too many dishes in the dishwasher. This will prevent the dishwasher from properly cleaning dirt from dishes. Please follow the instructions for placing dishes in the dishwasher.

C. High narrow vessels (vases) located in the corner area are not laundered properly. Do not place narrow vessels at high angles or angles. Follow the instructions for placing dishes.
Prevent stains on glasses

Rinse the glasses before putting them in the dishwasher.

Use glasses that can be washed in the dishwasher.
Use glasses from quality materials.
Use a dishwasher-safe glass protection program.

Good to know: a little vinegar or citric acid dissolved in hot water will make it easy to clean cloudy glasses.

Tips: If droplets of water remain on the glasses after washing, check the level of the rinse aid and make sure that the dishes are placed so that the water can drain. Improper dosage of detergent and poorly placed dishes can cause stripes and stains to remain on thin glasses. Too much rinse can also lead to stains on the glasses. Adjust the rinse amount per wash cycle according to the instruction manual.
Rust on cutlery

A. Cutlery can become rusty if they are not resistant to corrosion. Blades of knives are often most susceptible to corrosion. Use stainless steel cutlery and do not wash rusty items in the dishwasher.

B. Cutlery can become rusty when washed with other rusty objects. Replace damaged cutlery baskets that can be ordered from the online store using the component search system.

C. High salt content in rinse water can be corrosive. The salt container may not be tightly closed or the salt may have spilled during loading. When loading salt, make sure that it does not remain at the bottom of the container.
Cutlery: water drops or stains on cutlery

Cutlery misplaced. Droplet formation may be caused by too close cutlery. Avoid the formation of droplets by placing the cutlery at a distance from each other. Follow the instructions for placing dishes from the instruction manual.

More information about placing dishes in baskets
Refer to the instruction manual

We ensure that the dishes were dry

How to ensure that the dishes were dry? Many factors impede thorough drying. This may be a type of dish (eg plastic), an insufficient amount of rinse aid, a choice of dishwashing program that does not include a drying function, the use of 3-in-1 tablets, an incorrect method of removing dishes from a dishwasher, and even premature opening. Dishwasher doors or door opening until the end of the program. Some items are not as dry as they should be? Add rinse to the required level and make sure that all items are placed in such a way that water can flow freely from them. If plastic dishes are not dry enough, use the “extra dry” function if it is available in your model.
How to make plastic dishes dry?

Plastic dishes dry more slowly because they have a low thermal conductivity and water-repellent ability. Rinse level and program selection will help resolve this issue. If there is no rinse aid in the container or it is not enough, the results of drying for plastic dishes will be worse than for porcelain or glass. Choosing the right program is also important for the complete drying of plastic utensils. Select the "Intensive Drying" option. Also try not to remove plastic items from the dishwasher too soon. Wait until the program is completed to the end to allow the dishes to dry properly.
The use of rinse is necessary for complete drying of the dishes.

Please use a rinse to ensure good drying results. If the LED indicates a low rinse level, please add a rinse. The rinse aid function can be disabled or the dosage set to an insufficient level. In this case, please enable the rinse aid function or increase the dosage. Check the amount of rinse aid in the container and the dosage set. The conditioner promotes a good drying result. Quality differences between professional rinses and substitutes, such as vinegar or eco-rinse, lead to different drying results.
Dishwasher condensate

Due to condensation in the washing chamber of the dishwasher drops may form. This can be especially noticeable on the left wall of the washing chamber. This does not indicate a malfunction of the device; Water droplets are formed due to the principles of condensation drying. Moisture from the air condenses on the inner walls, drains and is pumped out. However, water may remain in the form of drops on cutlery or dishes for other reasons. For example, water accumulates in the recesses in the cups or dishes are not placed properly.
The program "Without drying" will not dry the dishes

If a program is selected or the "without drying" function is enabled, there is practically no drying. For more effective drying, choose a program that includes drying, for example, "Intensive", "Strong" or "ECO". Please note that some other features, such as VarioSpeed, also reduce drying efficiency.
The use of 3-in-1 tablets reduces the effectiveness of drying the dishwasher.

The use of a combined detergent (for example, 3-in-1) often leads to unsatisfactory drying results. Use other combination tablets that allow the dishes to dry better. Additional use of rinse aid will also increase drying efficiency. "
How to unload the dishwasher

To avoid water droplets on dry dishes, remove the dishes first from the bottom basket and then from the top.


Additional Tips for Dish Washing

Cleaning and maintaining the dishwasher helps to achieve brilliant dish washing results. Regular care and maintenance will improve dish washing results and extend the life of your Siemens dishwasher. Find helpful tips on dishwasher maintenance and cleaning of filters and spray arms in the Frequently Asked Questions about dishwashers.

Use the online dishwasher service to get the help you need: read the frequently asked questions. Use the Siemens online service assistant to get information on instrument malfunction. (You will need your device model number (E-Nr).) Go to the “Error Codes on Display” section for information on error codes. Learn how to properly care for your Siemens dishwasher with the help of instructional videos.

For best results, remove the dishes correctly.
How to place the dishes in the dishwasher .

The special adaptive elements in the Siemens dishwasher will help you to carry out a full load with the optimal distance between the dishes and the spray arm. Learn how to properly place the dishes in the dishwasher.


47A---------xx

Dawn Ultra Pure Essentials Dishwashing Liquid, Lemon Essence, 16.2 Fluid Ounce (Packaging May Vary)



Dawn Ultra Pure Essentials Dishwashing Liquid, Lemon Essence, 16.2 Fluid Ounce (Packaging May Vary)
Dawn Ultra Pure Essentials Dishwashing Liquid, Lemon Essence, 16.2 Fluid Ounce (Packaging May Vary)


Dishwashing Detergent



Chemistry for the kitchen

WASH
Professional hand dishwashing detergent

Professional tool with high detergency. Suitable for hand washing dishes, glass, cutlery, pots, all kinds of kitchen tools.

Properties and Benefits

Moderate surfactant content effectively removes complex dirt and grease from any type of glassware.
Detergent is eco-friendly, safe for health does not contain phosphates, chlorine, caustic acids and other harmful substances.
Neutral pH, safe cosmetic dye ensure respect for the skin of hands
The tool is convenient to use, gives a good resistant foam, it is easily washed off.
Economical consumption - used by soaking, 30–50 ml of the product is capable of washing large amounts of dirty dishes
Nice lemon scent

Scope of application

Recommended for daily soaking.

Terms of use

Prepare a solution, taking into account the hardness of the water. Soak the dishes in it. If the dishes are very dirty, leave them in the solution for a while. For best results, wipe with a sponge. After that, rinse the dishes under running water. Concentration: 0.3% -0.5%.

The recommended dose for 10 liters of solution:

30 ml for soft water (0-15 ° F)
40 ml for medium hard water (15-25 ° F)
50 ml for hard water (> 25 ° F)

Product Features

PH value: 7 ± 0.5
Packaging: 1000 ml (bottle), 5 kg (canister)


SUPER PLUS
Chemistry for dishwashers

Concentrated high alkaline low foam detergent for all types of automatic dishwashers working in regions with soft and medium hard water. Can be used by manual and automatic dosing.

Properties and Benefits

It has a strong detergent action at low dosages.
Perfectly removes fatty, starchy and protein contamination.
It has no destructive effect on the surfaces of rubber and plastic
Carefully applies to all types of dishes and glass
The composition does not include phosphates and surfactants, has no sharp smell
Prevents the formation of calcium deposits on the heating elements and the tank due to the chelating agents that make up the detergent

Scope of application

The chemistry for SUPERPLUS dishwashers can be used at catering establishments, in sanatorium, resort, children's, preschool, school, etc. institutions.

Terms of use

It is recommended to apply the product to the dishwasher using the integrated metering device. A rinse should also be supplied with the detergent, also automatically. The temperature regime of washing and rinsing is adjusted in accordance with the technological documentation on the machine.

Product Features

Concentration of working solution: 0.1% - 0.6% - depending on water hardness
PH value of concentrate: 12
Packing: 6 kg (canister), 24 kg (canister)


ACID RINSE
Rinser for professional dishwashers

Besfosfatny acidic rinse, designed for use in professional dishwashers and combi ovens.

Properties and Benefits

The moderate content of surfactants and organic acid, allow the agent to effectively act on the surface, giving the dishes and glass a shine, preventing the appearance of stains and streaks
The rinse remover effectively removes residual detergent, promotes rapid drying, completely neutralizes the alkaline environment
Can be used for washing in water of any hardness (even> 20 ° F)
Means does not contain abrasive substances and phosphates, does not form foam
Suitable for washing all types of dishes and glass, as well as for effective rinsing of professional kitchen equipment (combi ovens, grills, ovens)

Scope of application

It is used for daily washing dishes, as well as for rinsing professional equipment after complete cleaning with alkaline products.

Terms of use

Used with professional dishwashers and other kitchen equipment. It is added to water during rinsing in the car, moves with the professional dosing device. For best results, it is recommended to be used together with UNIVERSAL , SUPER PLUS , SF210 detergents .

Product Features

Concentration: 0.1-0.8 g / l
PH value: 1.6 ± 0.5
Packaging: 5kg (canister), 20kg (canister)



UNIVERSAL
Dishwasher Cleaner

High alkaline low foam detergent for dishwashers. Can be used to work in hard water. It is dosed automatically and manually.

Properties and Benefits

Detergent does not contain phosphates and surfactants, has a characteristic odor
It has a strong detergent action at low dosages.
Perfectly removes all types of dirt.
Does not destroy or damage sealing rubber and plastic products.
Does not burn, carefully treats the main types of ware and glass
The composition includes active substances that allow the binding of water hardness salts in soluble complexes.
Prevents the formation of calcium deposits on the fuel tank and tank

Scope of application

It is recommended for washing dishes in catering, educational institutions, health centers, etc.

Terms of use

Means is supplied using a dosing device or manually. It is recommended to use with a conditioner . Modes of washing and rinsing are set in accordance with the equipment manual. Suitable for all types of professional dishwashers. The concentration of the working solution:

0.10-0.15% for soft water (0-15 ° F)
0.15-0.20% for medium hard water (15-40 ° F)
0.20-0.40% for hard water (> 40 ° F)

Product Features

Concentration of working solution: 0.1% - 0.4% - depending on water hardness
PH value of concentrate: 13
Packing: 6 kg (canister), 24 kg (canister)


46A---------xx