Saturday, February 16, 2019

Zinus 14 Inch SmartBase Mattress Foundation/Platform Bed Frame/Box Spring Replacement/Quiet Noise-Free/Maximum Under-bed Storage in Warm Grey, Full

How to make a removable wooden bed for children?

The age at which parents decide to move their children from their crib to a bed varies between one and a half years after three years, although the ideal is to ensure that the safety bars of the crib will no longer be necessary.

In this project we will teach how to build a 1-place bed designed for a child up to 10 years old, and removable so that it can be moved and stored without problems.



Zinus 14 Inch SmartBase Mattress Foundation/Platform Bed Frame/Box Spring Replacement/Quiet Noise-Free/Maximum Under-bed Storage in Warm Grey, Full
Zinus 14 Inch SmartBase Mattress Foundation/Platform Bed Frame/Box Spring Replacement/Quiet Noise-Free/Maximum Under-bed Storage in Warm Grey, Full




Tools

• Corner presses
• jig saw
• Electric drill
• Milling machine
• Circular saw
• Paddle wick 10 mm
• Saw cup 60mm
• Manual screwdriver
• Orbital sander
• Sponge roller
• Paint tray
• Metallic ruler
• Gloves
• Safety glasses
• Mask

materials

• 2 Premium premium 18mm
• 1 Melamine 18 mm
• 2 Strips of 1 x 2 "
• 1 Flex Mattress 1 seat
• 1 Cold Cola Normal with Doser 500 gr
• 5 Wood sandpaper nº 180
• 1 round cutter 1/4 "
• 4 marquise bolt 2 pcs
• 1 Water-based enamel
• 1 pin Flat head 1/4 x 2 1/2 4 pcs

The bed is 1 square, so the mattress to be used measures 90 × 190 cm, and 24 cm high; this gives a total bed size of 193.6 x 93.6 x 60 cm. Its structure will have 5 pieces of removable wood, and two wheels, also made of wood. A very important aspect is the bed will not have points or edges, its angles will be curved and the edges of its edges will be rounded, reducing the possibility of accidents.


The minimum size to cut is: 10 x 30 cm

The 30 cm should always be positioned horizontally.

Plate 1


Plate 2


STEPS TO FOLLOW

1- Wood cuts

• The 18 mm plywood should be cut with the circular saw in 4 pieces. The sides are 2 pieces one measuring 193.6 × 60 cm and the other 193.6 × 45 cm, the head 90x40cm and the footboard 90 × 38 cm. These pieces are cut with the circular saw.
• From the same 18 mm plywood board, cut 2 wheels with a diameter of 25 cm, this circle must be done with compass and cut with the jigsaw.
• The 18 mm melanin that will be the bedspring of the bed must be cut into a piece of 89.5 × 189.5 cm.

The Terciado Premium differs from other boards as it is eucalyptus, and comes with better finishes, no knots in sight and with a base sanding that saves a lot of time at work. The main characteristic of the plywood is to be plywood, which gives resistance to the wood. The 15mm common ply has 5 ply layers while the 15mm ply has 9 layers which gives it more strength and less chance of it becoming deformed.

2- Mark the pieces

• To make the legs, mark the footing 5 cm at each end towards the length of the piece, and 13 cm high. Each side has a leg that is 20 cm wide and 20 long, and that should be marked leaving 10 cm from the edge. And the other leg of each side is stuck to the edge, also measures 20 × 20 cm, but it should be deducted 7 cm high because that will be the space that will occupy the wheel.
• The highest side that is attached to the wall has a first recess that goes on the side of the shortest leg. This recess is 15 cm high and 103.6 cm long. And on the other side are 2 drafts, one larger 7.5 x 35 cm, and 7.5 cm from the top edge. And a second smaller draft that is attached to the right edge, also 7.5 cm high but only 10 cm long.
• And the header has 2 drafts, one attached to the left edge of 7.5 x 10 cm that goes to 7.5 cm from the top edge. And the other that is attached to the right edge that is 15 cm high and 10 cm long.

3- Cut the shapes

• Before cutting you have to mark the curves to all the drafts and terminations, this can be done with a compass or with the mold of a glass or round pot.
• Cut the drafts with jigsaw and straight lines with circular saw

4- Make the sommier

• To the piece of melamine it is necessary to make openings with wick 60 mm cup, 8 holes are made evenly distributed. These openings serve to make the mattress breathe and make the bed easier.

5- Fix the slats

• The bed base will be supported with strips that will be fixed to the bed all over the interior, flush with the lower edge, sticking them and screwing them by its widest face.
• The height at which the slats are fixed is calculated based on the 24 cm height of the mattress. The idea is that the mattress protrudes from the bed at least 4 cm, for comfort and especially to avoid contact with the edges.

Wick cup

The wick cup or saw cup is an accessory of the drill that serves to make circular cuts in wood or metal. There are different diameters that are measured in millimeters, in the center there is a pointed drill that marks the center of the hole.

6- Make the perforations

• The recommended and appropriate when building a bed, is that it is removable. For that reason, for joints you have to use bolts with marquise system, which have a bolt that is caught by a car that enters through a second hole. To install them, it is necessary to calculate that both perforations coincide.
• They go 2 bolts in each corner, 5 and 20 cm from the top edge, without bumping the slat that will hold the mattress. The bolt holes are made with a 7 mm wood drill bit and a 10 mm drill bit or carriage.

7- Round and sand

• With the router, round all edges and corners.
• Pass a soft sandpaper to remove the chips and improve the finish.

Milling machine

This machine is also known as a router or tupi, the good thing is that it can be leased, and it is a super good ally in carpentry work, because it makes recesses, cuts and cuts the wood, everything depends on the strawberry that is put on it.

8- Painting

• With a sponge roller, apply the polish to the glossy water on all the pieces and on all sides. The color chosen for the termination is a primary blue, close to the marine motifs. The paint is totally free of volatile organic compounds; ideal when it comes to children's furniture.

9- Arm the bed

• Affix the pieces with corner presses to join with the marquise bolts one of the sides with the headboard and then with the footboard, to finally fix the second side.
• To allow the wheels to turn, we attach them to the legs with flat head bolts, nylon socket and nylon lock. The location of the axis of the wheel is the measurement, from the ground, of its radius; including the shorter 7 cm of the leg.

• Place the mattress on the slats and then the mattress, which should be protruding approximately 4 cm.
• It is suggested to fix the bed base to the 1 × 2 slats, only in the center.

Zinus Arnav Modern Studio 10 Inch Platform 2000 Metal Bed Frame / Mattress Foundation / No Box Spring Needed / Wooden Slat Support / Good Design Award Winner, King

Twin bed plans

Material's list
The list of materials below assumes that all wood is good. You should buy extra wood to get rid of the defective parts. It is generally best to buy wider boards and cut them lengthwise into narrower pieces, such as buying 2x6 lumber and cutting the 2x3 pieces from them. You get much better wood that way. It may be better to buy five pieces of 2x10x8 'instead of the parts marked with an asterisk and cut everything from them.



Zinus Arnav Modern Studio 10 Inch Platform 2000 Metal Bed Frame / Mattress Foundation / No Box Spring Needed / Wooden Slat Support / Good Design Award Winner, King
Zinus Arnav Modern Studio 10 Inch Platform 2000 Metal Bed Frame / Mattress Foundation / No Box Spring Needed / Wooden Slat Support / Good Design Award Winner, King



          
            Part    Quantity    Used for
  • 2x8 x 8 '    3 *    Side stringers, also lower horizontal part of the headboard and feet.
  • 2x3 x 8 '    3 *    To make poles
  • 2x10 x 8 '    one *    For the horizontal top part of the headboard and the feet.
  • 2x2 x 8 '    two    Supports for the slats on the side rails.
  • 1x4 x 8 '    6    For the lamas.
  • 3/4 "tarugo    6 '    To cut off the plugs. Buy enough length to get 6 '(feet)
  • 2.5 "# 10 wood screw    24    To mount the side rails
  • 2.5 "# 10 wood screw    10    To screw the brackets for the slats on the side rails.
  • Wood glue    100ml    At least 100ml of wood glue.




Cut in section
  • Notice how the slats rest on the shelf inside the side rails.
  • Mattress 7 "thick.
  • Lamas 3.5 "x0.75" x38.5 ", 12 pieces.
  • The slats rest on the shelf of the side rails.
  • Dimensions of the headboard
  • All outer edges have a 1/4 "x1 / 4" bezel. This is best done with a few passes of a carpenter's brush (not the electric one).
  • Headboard assembly
  • The holes for the plugs are best drilled by fastening the header board and post together with sergeants and drilling the hole completely from the outside, as indicated in the diagram below.

  • This part is glued after the rest of the headboard is glued.
  • Tarugo 3 / 4x3.5 "
  • Hold the post and the board together in position. Then drill through both.
  • Do not drill the holes for the screws until you assemble the bed.



Dimensions of the feet
The feet are practically identical to the headboard. If you are one of those people who prefer to hang their feet outside the end of the bed, leave without putting the top horizontal board and make the legs only 18 "high.
Rails of the bed
The side rail has a series of blocks in the inner corner. The purpose of these is to space the slats and prevent them from slipping out of position.
It is better to glue and screw the 1.5 "x1.5" brackets for the slats to the main part of the spar, to make sure it is solidly attached.

  • Stringer cut from a 2x8.
  • Bevel the edges making several passes with a carpenter's brush.
  • Stick wooden blocks with glue, 0.75 "x0.75" x2.5 "
  • 2x2 stuck to the side of the crossbar. The 2x2 measures 74 "long

Assembly
Bed structures in general are designed to be dismantled when they move. In this bed structure, unscrewing the side rails allows us this trick.
The slats are placed between the side rails and held in place only by gravity. The blocks on the side stringers prevent them from slipping out of place.
The first and last slats need to cut notches in the corners to fit the posts.
Cut the 1x4 wood slats.
Pre-assemble the structure, then drill the holes for the screws through both parts. That way your holes for the screws will be aligned.
Use 3 "# 10 wood screws.

Friday, February 15, 2019

Best Price Mattress Twin XL Bed Frame - 14 Inch Metal Platform Beds [Model E] w/ Steel Slat Support (No Box Spring Needed), White

How to make a removable bed

We teach you step by step to make a removable wooden bed. We will make the whole structure that we can see without problems to take the bed to another site.

We will make the complete structure of a bed starting from several tables and wooden blocks and with a carpentry technique that will allow us to assemble all the pieces together without using any fixing element. This will make disassembling and transporting it almost, almost child's play.

Making several cuts to half wood we will get that the crossbars and the legs of the bed are mounted easily without any element of union, as if it were a puzzle, fitting some pieces in others with the hand, without tools .



Best Price Mattress Twin XL Bed Frame - 14 Inch Metal Platform Beds [Model E] w/ Steel Slat Support (No Box Spring Needed), White
Best Price Mattress Twin XL Bed Frame - 14 Inch Metal Platform Beds [Model E] w/ Steel Slat Support (No Box Spring Needed), White




The bed base will also be very basic so that when it comes to dismantling and transporting the bed, we only have to roll up all the beds of the bed base and disengage the legs and the crossbars with our hands.

Tools
  • Electric brush
  • Vaccum cleaner
  • keyhole saw
  • Jaws
  • Squad
  • Cutting blade for wood
  • circular saw
  • Chisel
  • Mace
  • Column drill
  • Ø 30mm blade shovel
  • Rasp
  • Orbital sander
  • Sandpaper grain medium and fine
  • Driver drill
  • Drill bit for wood diameter 5
  • Electric stapler.

Materials
  • Planks of oak of 17x30mm and 90x90mm
  • 4x50mm lag screws
  • 10mm thick poplar plywood
  • Blind tape
  • 10mm staples

Step by step to make a removable bed


Step 1
We commission the tables with which we will build the structure of the bed to the extent of our mattress . The first thing we have to do is cut with the circular saw strips that will serve as support for the mattress.

Step 2
We already have all the pieces that we need, so we started working on the crossbars of the bed, using the jigsaw to cut half the wood.

Step 3
The chisel and the mallet will help us complete the job.

Step 4
We reduce and smooth with the electric brush the surface of the studs in which we will work next to turn them into the legs of our bed.

Step 5
Being a hardwood block before making the cuts to half wood we will have to make some holes with the drill and spindle drill bit .

Step 6
Now, yes, we go through the holes with the jigsaw until we get the notches we need so that these pieces fit perfectly with the crossbars.

Step 7
We finish the cuts with the rasp and then we sand all the pieces of the bed.

Step 8
We make holes in the slats that will support the mattress.

Step 9
With lag screws we fix the slats to the crossbars.

Step 10
We assemble piece by piece , as if it were a puzzle, our new bed.

Step 11
As we want it to be completely removable and easy to transport, we are also going to make the slatted base in the manner of slats that we join together with blinds.

Step 12
We support the bed frame on the bed and we can only place the mattress and enjoy a piece that from now on will accompany us without problems wherever we go.

Step 13
Completed work! In this simple way we have created the structure of a removable bed . A different and practical carpentry work.

Zinus Lorelei 14 Inch Platforma Bed Frame / Mattress Foundation / No Box Spring Needed / Steel Slat Support, Twin

HOW TO MAKE AN OLD BED FRAMEWORK IN A PORCH OSCILLATION
Reuse an antique bed frame on a swing to create a comfortable outdoor living space on your sunroom or on the back porch. Children and adults will be attracted to the cozy respite when they fill it with pillows and soft bedding. Building materials are available at your local home improvement store. Although an adult can perform the necessary steps to transform the bed, two adults are needed to hang the complete swing.



Zinus Lorelei 14 Inch Platforma Bed Frame / Mattress Foundation / No Box Spring Needed / Steel Slat Support, Twin
Zinus Lorelei 14 Inch Platforma Bed Frame / Mattress Foundation / No Box Spring Needed / Steel Slat Support, Twin




Things you will need
Step 1
Sand the frame of the bed with an electric sander and wipe the excess dust with a cloth. Paint or stain the frame of the desired color. Allow the frame to dry completely. You can skip this step if you like the original color of the bed frame.

Step 2
Cut 4 keys from the 2 by 4 tables with a saw if your previous bed frame does not have existing clamps. These should be the same width as the inside of the frame of the bed. Place the clamps at an equal distance through the frame of the bed and screw them with wood screws.

Step 3

Cut the plywood according to the dimensions of the frame of your bed to form the lower support of the swing. Place the plywood on the supports. Secure the plate in place with 1 1/4-inch screws.

Stage 4
Drill retentive pin size holes 5 1/2 inches from each corner on each side of the bed frame, totaling 8 holes. Insert a lag eye bolt into each hole. Slide a screwdriver through the eye of each bolt and use it as a lever to tighten the bolts.

Step 5
Drill four holes of the same diameter as the lag eye bolts on the roof rafters where the porch swing will hang. These holes should correspond to the corners of the bed frame. Insert 4 delayed eye bolts into the holes and tighten them.

Step 6
Pass a chain through an eye bolt from the ceiling and down through the 2 bolts into a corner of the bed frame. Connect the ends of the chain with a quick link or carabiner, forming a triangle with the chain in the corner. Repeat for the remaining corners and roof bolts.

Step 7
Adjust the chains so that the swing is uniform, using the level if necessary. Place the mattress on the frame of the bed and cover it with bedding and pillows.


Things you will need
  • Bed structure without headboard or footboard
  • Electric sander
  • Cloth
  • Paint or stain
  • Mountain range
  • 4 wooden boards, 2 inches by 4 inches
  • 1 1/4-inch wood screws
  • Punch out
  • Screwdriver
  • 12 coach screws
  • 4 chain lengths
  • 4 quick links or carabiners
  • level
  • Mattress
  • Bed
  • Pillows

Tip
  • Place the bed frame on two trestles to hold it while hanging the chains.



HOW TO MAKE AN UPHOLSTERED HEADBOARD

Do you need a new headboard? Hands on, then;) Transform a wooden board with foam, wadding and a nice fabric and create your own custom bed headboard. To make it more special, choose an equidistant button as if it were a tufted upholstery.

TOOLS
  • Needle
  • Cutter
  • Flexometer
  • Manual stapler
  • 60W heat gun
  • Marker pen
  • Drill
  • Scissors

MATERIALS
  • Buttons
  • Foam
  • Wadding
  • Thread
  • Wooden board
  • Cloth

STEP BY STEP

1. MAKE THE HOLES
To start creating this homemade headboard you have to make several holes in the wooden board, which will serve you to later attach the buttons to the headboard and imitate the upholstered capitoné. To do this, divide the wood into a grid with the help of a flexometer and mark the position of the buttons at the intersections between the squares. When you have it, use a drill and a spade bit to make them.

Marking the position of the holes in the wood to put the buttons
Drill making holes in the wood

2. PLACE THE FOAM AND WADDING
Put the wooden board, already bored, on a foam board and mark its outline. Cut the foam to that size and, with the foam still underneath, pass a marker through the holes in the wood to mark the same holes in the foam. Remove the wood and use a cutter to open the holes in the foam: you will need them to pass the buttons. When finished, stick the foam on the wood with the help of a heat-set gun.

Once you have made that step, place the headboard over the wadding and cut a piece enough to cover the entire surface. Staple the wadding on the back of the headboard with a manual stapler and cut the excess with scissors.

The wadding will help you to soften the edges of the upholstery.

  • Cutter cutting the foam
  • Marker marking the position of the buttons in the foam
  • Cutter cutting the foam
  • Thermofilm gun by applying hot glue to stick the foam
  • Stapling of wadding
  • Scissors cutting the excess of wadding

3. STAPLE THE FABRIC
Repeat the operation, but with the fabric. Put the headboard over, cut a piece that covers and staple with a manual stapler, cutting the excess.

Stapler fixing the fabric to the wood

4. FIX THE BUTTONS
To finish this project, you have to fix the buttons to the headboard. Use a needle to attach them to the headboard. The first thing you have to do is cut pieces of thread and pass them through the buttons. Then, pass the needle through a hole, from the front to the back, without passing it whole, leaving the hole out. Pass the two ends of the thread through the hojal and pass the needle. Take the threads on the back of the headboard and pull hard so that the button is slightly sunken. To finish putting the button, staple the threads to the wood behind the headboard. Repeat the operation by placing a button in each hole you have made.
Result of the cabiner
Ready! What do you think of the result? Make a spectacular headboard is quite simple, as you see ... Dare!

Best Price Mattress Full Bed Frame - 18 Inch Metal Platform Beds w/ Heavy Duty Steel Slat Mattress Foundation (No Box Spring Needed), Black

How to make a canopy bed frame

A frame of the canopy bed is a romantic and attractive bed treatment that can dress any room. If you always wanted a canopy bed frame, but assumed it would be too expensive, there are affordable ways to create a canopy bed frame. Learn how to make a canopy bed frame from which you can hang cloth panels to make a canopy bed of any type of bed.

Instructions

  • 1 Measure the length and width of the bed. Write down these numbers.
  • 2 Cut two lengths of PVC pipe in the width measurement taken in Step 1. Cut two lengths of PVC pipe in the length measurement taken in Step 1. Present the cut ends of the pipe so that they are smooth.
  • 3 Install ceiling hooks on the ceiling by screwing the hooks over each corner of the bed.
  • 4 Cut eight 12-inch lengths of fishing line. Tie the ends of each length of fishing line securely and securely together to make eight turns of fishing line.
  • 5 Place two line loops on each hook that hangs from the ceiling.
  • 6 Place the PVC pipes on the fishing line loops. The two longitudinal lengths of PVC pipe hang from the fishing line above the loops on the sides of the bed. The two lengths of PVC tubing hang from the fishing line loops above the top and bottom of the bed to finish the frame of the four-poster bed.

How to make a headboard with wooden slats step by step

If you are looking for a headboard that is original, practical and economical, look no further. With this tutorial step by step you will learn how to make a headboard with wooden slats and shelves that are inserted between them. Show off furniture made by you with this DIY project.



Best Price Mattress Full Bed Frame - 18 Inch Metal Platform Beds w/ Heavy Duty Steel Slat Mattress Foundation (No Box Spring Needed), Black
Best Price Mattress Full Bed Frame - 18 Inch Metal Platform Beds w/ Heavy Duty Steel Slat Mattress Foundation (No Box Spring Needed), Black





Normally the headboards have a decorative function, but they can also become a practical solution for small bedrooms. The next headboard made with wooden slats has the advantage that it incorporates practical shelves. In this way, we have a place to place a lamp or to leave our personal items, without having to purchase extra furniture.

headboard with wooden slats

Tools and materials
materials to make a headboard with slats

In the following list you will find the tools and materials that are needed to make a headboard with wooden slats like the one in this tutorial:

  • Miter saw
  • Sander
  • Driver drill
  • Screwdriver
  • Japanese saw
  • Stapler
  • Sergeants for angles
  • 8 spruce strips of 200 × 3.8 × 3.8 cm and a pine board of 200x30x1.8 cm
  • Wood screws
  • Ears of wood
  • Carpenter's tail
  • Painting for indoor furniture
  • Spray varnish
  • Brush
  • Cost, duration and difficulty
The cost of this headboard is less than € 40 . If we also take into account that it is a multifunctional furniture, the fact of doing it yourself is a great economic saving since, although there are similar solutions in the market, its price is much higher.

On the other hand, in the following ManoMano shopping cart simulation you will find a selection of tools and materials that have been used.

For its execution you will need a working day because the headboard assembly has been made in such a way that the screws are hidden. This process requires a series of steps that prolong the assembly time.

Finally, your level of difficulty is medium since it requires some practice with the use of power tools.

Tutorial to make a headboard with wooden slats
This headboard has the advantage that shelves can be inserted between the wooden slats. In addition, since they are not fixed shelves, they can vary in position to adapt to our storage needs. For that reason, it is a very useful and versatile furniture, and ideal for small spaces or tight budgets. To do it yourself you must follow the following steps:

1.- Sanding the slats

The first step will be to sand the wooden slats with a sander to remove imperfections, chips and roughness. It is recommended to use a medium grain sandpaper and finish with a fine grain sandpaper. In this way a much softer finish to the touch is achieved.

sanding wood slats

2.- Make the outer frame of the headboard
The next step will be to cut the wooden slats at a 45º angle with the miter saw to make the outer frame of the headboard . Since the bed is 90 cm wide, two slats of 140 cm long and another two of 60 cm have been cut for the height, so that there is enough slack on both sides.

Next, the miter cut ends will be glued and sergeants will be placed for angles that will be removed once the glue has dried.

frame with wooden slats

3.- Assemble the interior slats
To provide a decorative effect to this headboard, the slats have been arranged horizontally and diagonally. Between the horizontal slats the shelves can be inserted, while the diagonals fulfill a purely decorative function.

The assembly of the internal slats has been done in such a way that no screws are visible. For this, the following steps have been followed:

  • Drill the outer frame with a 6mm wood drill bit, but only up to half its thickness.
  • Insert a lag bolt and screw to the inside lath
  • Hide the hole by inserting a wooden dowel and a few drops of carpenter's glue to fix it
  • Cut the excess part of the spike with the Japanese saw, since it allows to make cuts flush with the wood
  • hidden assembly trick

Between the horizontal slats a space of 2 cm and of 6 cm between the diagonals has been left. The following image shows how the internal battens have been screwed up to complete the interior of the headboard.

headboard with wooden slats

As the battens are screwed in, there comes a time when there is no room inside to put the drill and drill. In this case, the slats will be joined by staples at the back of the headboard.

headboard with wooden slats

4.- Make the shelves

Once the headboard is assembled, shelves will be made to be inserted in the slots. For this purpose, with a telescopic miter saw three pine boards of 35x15x1.8 cm, of 25x20x1.8 cm and of 15x20x1.8 cm, will be cut.

If you do not have a telescopic miter saw, you can also use a circular saw or a jigsaw .

shelves for a headboard with wooden slats

5.- Paint and protect the wood
The last step will be to paint and protect the wood . To this end, the wood of the headboard has been varnished with clear varnish in spray, since with this format it is easier to reach all the grooves and nooks and crannies.

On the other hand, the shelves have each been painted a different color, but all within the range of blues. In this way, a very decorative effect is obtained.

protect and paint a headboard with wooden slats

After following all the steps indicated above, this will remain the DIY headboard.

headboard with DIY wood slats

As you can see, it does not lack detail:

The wood in a natural tone gives an elegant, modern and design touch
A single piece of furniture fulfills the function of two different ones, saving space and money
Adjustable shelves make it practical and versatile
headboard with wooden slats

Did you like this idea to make a headboard with wooden slats and adjustable shelves? In any case, do not miss these other ideas to make a headboard with pallets and a bed with pallets . They are ideal to show your friends and family your skills as handyman.

DUMEE Queen Size Metal Bed Frame Platform Modern American Style Mattress Foundation with Headboard and Footboard Box Spring Replacement Black Textured

Tutorial to make the most wonderful sofa bed of all

There was a corner in our patio that needed to be filled with something, and we came up with a great idea: to build something that would serve to sit us down and also to lay down!

The five important details:
  • - We built a frame of the size that we wanted to adjust it to the floor we already had.
  • - We use recycled wood to hide the frame.
  • - We use agglomerated wood to create the upper part of the frame.
  • - We put foam on the wood and then covered it with an old cloth that we had.
  • - We made that the covers could be removed to be washed.

The basic details of how we built it:

1. Decide which is the size you want (ours is 1200 x 1400 x 380)

2. The framework:
We use 5 × 10 cm pine boards. and we made frames that coincided with our measurements.
We use 2 pieces for the edges and 3 for the remaining edges. Also one that we put in the middle to have more support.
You must think about where you should add this support according to the size of what you are building.
We use the nailer to assemble all the pieces, and you can ask that you cut the wood to size in almost all the stores that sell this type of materials.



DUMEE Queen Size Metal Bed Frame Platform Modern American Style Mattress Foundation with Headboard and Footboard Box Spring Replacement Black Textured
DUMEE Queen Size Metal Bed Frame Platform Modern American Style Mattress Foundation with Headboard and Footboard Box Spring Replacement Black Textured




Remember to subtract the width of each piece of wood from the width (or length) measurements for the 3 pieces of wood that will go in between. (You can see it below)

We tested it to make sure it fit well, and then screwed it to the floor. We also screw the pieces of wood together.

Other alternatives would be to join the agglomerated wood to the base and screw wheels to make a bed that can move or screw this agglomerated wood to the base and then screw the frame to it to make it more resistant to the inclemency of the weather and so that You can also use the interior to store things. Just add a hinge on the top!

3. The sides.

Then we joined the recycled wood that we had cut according to the size of the frame once it had already been screwed.

We joined it by screwing from the inside so that the screws could not be seen.

We left the wood as it was because we wanted it to have that old look.

4. The top part.

Once the part of the sides were ready, we measured the inside and then cut a piece of custom-made chipboard.

You may notice that we made the frame a little lower than the wooden sides so that part of the "bed" (the upholstered part) looks better.

You could build a frame that is the same height as the sides so that the upholstered part is on top. If you wanted to join the hinges to have a place to store things in the bottom, you would have to do it this way.

It is difficult for us to take out the top part, because it fits very well. But it is what we wanted.

At this point you have already achieved an incredible scenario: Perfect for a 4 year old who has just received a Christmas toy microphone and who does MANY shows!

SLEEPLACE 18 Inch Tall Heavy Duty Steel Slat Bed Frame ST-3000 (Full)

We teach you how to make your own floating bed, do not miss it.

Looking for originality when decorating our house does not have to be synonymous with spending a lot of money buying furniture in exclusive stores. We always insist that there are many options at our reach, we just need a couple of good ideas and a little patience and skill to be able to manufacture the exclusive furniture ourselves.

The economic cost is much lower and although we take a couple of days to manufacture it, it will be an exclusive work that we can enjoy for many years . Today we want to show you how to build the base so that a bed seems floating . Of all the DIY we have developed, this is not exactly the simplest, however the result is spectacular and you just need a little patience.



SLEEPLACE 18 Inch Tall Heavy Duty Steel Slat Bed Frame ST-3000 (Full)
SLEEPLACE 18 Inch Tall Heavy Duty Steel Slat Bed Frame ST-3000 (Full)




We leave you the photographs explaining step by step the procedure to get your own floating bed, attentive!

  • These are the basic planes of the two bases that we need.
  • Both frames are joined at the top center.

The lower base is made with slats 5 cm wide x 20 cm high and the upper frame with slats 5 cm wide x 10 cm high. Therefore, the measurement of the base will be: 120 cm x 170 cm x 20 cm and the measurement of the top frame will be: 170 cm x 2.10 cm x 10 cm. These are the corresponding measures for a mattress of 150 cm x 190 cm.

  • We place a wooden plank on the base to achieve a flat and smooth surface.
  • We place the headboard on the top, where we have joined the two main structures.
  • The measurements of the headboard will be 170 cm x 100 cm x 5 cm.
  • Once we put everything together, we sanded it to be able to paint it.
  • In this case a mahogany wood color was chosen to be able to give contrast with the room, but obviously the color is optional.
  • We placed on the edge of the structure, at the bottom, a string of LED lights of 7 meters bordering it as shown in the photograph.

This is the final result:

  • You already have a floating bed for your bedroom, enjoy it!

Zinus 12 Inch SmartBase Mattress Foundation, Platform Bed Frame, Box Spring Replacement, Quiet Noise-Free, Twin

How to make a wooden base for a bed

Building your own wooden base for an average-sized bed instead of buying one in a store will save you money. Bed bases or frames raise mattresses 6 or 8 inches (15.24 or 20.32 cm) from the floor so that they are at a more comfortable level when people lie down and get up.

Instructions

Cut the pieces for the base of your bed
Cut two 6-foot x 9-inch pieces (1.83 mx 22.86 cm) from the 2 x 4-inch boards (5.08 x 10.16 cm) with the circular saw to make part of the frame.

Cut four pieces of 4 feet x 9 inches (1.22 mx 22.86 cm) from the 2 x 4 inch boards (5.08 x 10.16 cm)

Cut the four pieces of 6 feet x 4 x 4 inches (1.83 mx 10.16 x 10.16 cm) in half to make the legs that will be the frame support.

Cut the plywood board neatly and turn it into a piece of 5 x 6 feet x 9 inches (1.52 x 1.83 mx 22.86 cm), which will be the top part of the frame.

Sand all the edges of the pieces you have cut. Apply ink or paint to wood and let it dry.



Zinus 12 Inch SmartBase Mattress Foundation, Platform Bed Frame, Box Spring Replacement, Quiet Noise-Free, Twin
Zinus 12 Inch SmartBase Mattress Foundation, Platform Bed Frame, Box Spring Replacement, Quiet Noise-Free, Twin




Assemble the base of the bed
Find a solid surface and place the two 6-by-9-inch pieces (1.83 mx 22.86 cm) on the edge, parallel to each other, with a separation of 5 feet (1.52 m). Complete a rectangle by placing the two pieces of 4 feet x 9 inches (1.22 mx 22.86 cm) between the other two. Place 3 2 1/2 inch (6,35 cm) screws through the ends of each of the long pieces and attach them to the shorter pieces.

Add support beams into the frame using two other 2 x 4 pieces (5.08 x 10.16 cm). Place them parallel to the shorter pieces of the frame. Place them inside the frame with a even space between beam and beam and attach them to the frame. Place two 2 1/2 inch (6,35 cm) screws through the 6-foot x 9-inch (1.83 mx 22.86 cm) sides and attach them to the support beams.

Place a piece of 3 feet x 4 x 4 inches (0.91 mx 10.16 x 10.16 cm) against each of the inside corners of the frame to be the legs of the bed. Place 2 1/2 inch (6.35 cm) screws through the frame to secure them in place. Use two screws on each side of the frame that is in contact with the leg.

Place another piece of 3 feet x 4 x 4 inches (0.91 mx 10.16 x 10.16 cm) in the center of each of the long pieces on the sides of the frame. Place four 2 1/2 inch (6.35 cm) screws through the outside of the frame to secure them.

Use the remaining two pieces of 3 feet x 4 x 4 inches (0.91 mx 10.16 x 10.16 cm) to place legs in the center of the frame. Place a 4 x 4 piece (10.16 x 10.16 cm) in the center of the support beams closest to the outer frame. Place four 2 1/2 inch (6.35 cm) screws through each support beam to secure them.

Turn the complete part of your frame over its legs and place the piece of plywood over it so that it is aligned. Place a 1 1/2 inch (3.81 cm) screw through the plywood along the edges and the support beams to secure it to the frame.

Add more strength to the legs by placing two 1 1/2 inch (3.81 cm) screws through the plywood to secure them. Your new bed base is ready for a mattress.

You will need to
  •  6 tables of 7 feet x 2 x 4 inches (2.13 mx 5.08 x 10.16 cm)
  •  4 tables of 6 feet x 4 x 4 inches (1.83 mx 10.16 x 10.16 cm)
  •  1 plywood board with high quality soft finish of 5 x 10 feet x 3/4 inches (1.52 x 3.05 mx 1.90 cm)
  •  A tape measure
  •  A circular saw
  •  Sandpaper
  •  Painting or tincture for wood
  •  Screws for wood of 2 1/2 and 1 1/2 inches (6,35 and 3,81 cm)
  •  A screwdriver

ZIYOO 14 inch Heavy Duty Steel Slat Platform Bed Frame, Non-Slip Design, Strengthen Support Mattress Foundation, Quiet Noise Free, Full

3 ways to make a wooden bed

Do you have a rickety metal bed? Or maybe you have the mattress on the floor without a bed. Have you considered getting a wooden bed? You can add a lot of charm to your room and get rid of the annoying squeaks. However, you should bear in mind that they are not cheap. We present a simple plan to build your own wooden bed that you can modify for any size (or height!) You want.



ZIYOO 14 inch Heavy Duty Steel Slat Platform Bed Frame, Non-Slip Design, Strengthen Support Mattress Foundation, Quiet Noise Free, Full
ZIYOO 14 inch Heavy Duty Steel Slat Platform Bed Frame, Non-Slip Design, Strengthen Support Mattress Foundation, Quiet Noise Free, Full




Method 1
Regular queen bed

1
Buy all the materials you need. See the list of Things you will need below for specific details. The goal is to build a bed that can accommodate a queen size mattress (1.50 m wide x 1.90 long). In addition to that, you must visit your local construction store to buy three basic things:
Rail hangers
Wood
Wood screws
2
Mount the hangers for bed. This material is essential to form rigid connections between all bed rails. Secure the hangers to the end of the side rail and the head. Check again that each connection is consistent. Repeat the process for each machine.
Sometimes you may find it difficult to find these hangers in construction stores. If so, check online stores.
Generally, hangers are sold in packages of 4 sets.
Instead of hangers for rails, you can use long screws. When you secure them, the screws make the bed very solid. Also, it is much easier to find lag screws than rail hangers.
3
Install the support rails. Screw the support rail to each side rail. Make sure you leave 30 cm (12 inches) apart. This provides the maximum weight support.
4
Create the support blocks. Make a slot in the support block and support beam, as shown. This slot should be a centered hole of 4 cm x 6.5 cm, the longest measurement of which should follow the widest part of the block.
5
Install the support blocks. Connect each support block to the center of the head rail and the foot rail of the bed with screws as shown in the picture.
6
Connect the rails. Connect each rail to the posts using the rail hangers.
7
Add the support beams. Insert the support beams between the two support blocks.
8
Insert the mattress plywood surface. Place the plywood on the support rails and support beam. It should fit inside the structure of the bed. When you're done, you can put the mattress on the bed.
9
Ready! Enjoy your new bed!


Method 2
Platform bed

1
Gather the materials and tools. You need a circular saw, a number of L-brackets, 8-centimeter self-drilling screws, some medium-density fibreboard or plywood, and several wood cuts. The cuts should be:
Two pieces of 2.15 meters of 2x4
Five pieces of 1.70 meters of 2x4
Eight pieces of 50 centimeters of 2x4
Two pieces of 2 meters of 2x12
Four pieces of 1.5 meters of 2x12
2
Create the base structure. With regular flat joints, use the self-drilling screws to join the pieces of 2 meters of 2x12 and two of 1.5 meters of 2x12 in a box of 1.5x2 meters.
3
Add the base bras. Place by sliding the remaining 1.5x2x12 pieces and then use the self-drilling screws to secure them in place. Leave the completed base aside.
4
Create the platform structure. Use regular flat joints and use self-drilling screws to join the pieces of 2.15 meters of 2x4 with two of the 1.70 meters of 2x4 to form a box of 1.80x2.15.
5
Add the platform bras. Place sliding the remaining pieces of 1.70 of 2x4, separate the box into 4 sections and then use self-drilling screws to secure the bras in place.
6
Install the platform supports. At this point you will have to add the pieces of 50 centimeters of 2x4 between the bras; two per section. Separate them uniformly, but overlap them, so that the left end and the second from the right have the supports at the same level as the right end and the second from the left. Adjust them with self-drilling screws as well.
7
Reinforce the corners and joints. Reinforce the inner corners of the base and the platform with L brackets. You can also add L brackets around other interior joints to increase its strength.
8
Install the plywood surface. Trace and cut the plywood to fit on the platform. You may need two pieces of plywood to cover it. Secure the plywood on the inner supports with self-drilling screws, so that the screws are not visible on the exposed platform.
9
Paint the bed. Sand the wood and then paint or dye the bed of the desired color.
10
Ready! Place the platform on the base at its final location. You can secure the platform at the base with a few strategically placed L-brackets if you want. Now just place your queen or full size mattress!

Method 3
Double captain bed

1
Get the materials. You will need two Ikea Expedit bookshelves (2x4 squares), several meters of Velcro, a saw, 24 basic L-brackets with fixing screws and wood in the following sections:
Four pieces of 1 meter of 2x10
Six pieces of 70 centimeters of 2x10
Four pieces of 40 cm of 2x10
2
Create the boxes at the ends. You will use the wood to build two bookcases at the ends that share the weight of the bed with the Expedit booksellers. The boxes are created by connecting two pieces of 1 meter of 2x10 wood to two sections of 70 centimeters of 2x10 wood in a box of 1 meter x 80 centimeters. Secure the parts with self-drilling screws: 3 for each joint. Secure each corner with an L-bracket in the center.
3
Add the central bra. Then, center and secure another piece of 70 centimeters of 2x10 wood in the same way to create two sections in each box. Secure the center bra with an L bracket on each side at the bottom and top.
4
Add shelves if you want. If you want to add shelves, you can do it easily with some 1x10 wood cut into pieces of 40 centimeters. Adjust the shelf to the desired height and then secure the bottom with L-brackets, two per side.
5
Add a backup for booksellers at the ends. Trace the bookshelves in plywood and cut the back with a saw. Clamp it in place by hand or with a pneumatic nail gun.
6
Add legs to the booksellers at the ends. You probably want to place felt feet on the bottom of these bookshelves to avoid scratching the floor or moving. You can buy them easily in many types of stores.
7
Paint the four booksellers to match. When you're done with the booksellers, you'll want to paint them in the same color as the Expedit booksellers. Use aerosol paint that is graduated for use in laminate.
8
Install the plywood in the bookcases at the ends. Cut a piece of plywood 1 meter x 1.90 meters. With both bookcases facing outward and the Expedit bookshelves nestled between them, nail the plywood in place through two nails through the plywood and into the sides of the bookcases at the ends.
You can stick a non-slip cover, like the ones that go under the rugs, if you want.
9
Accommodates Expedit booksellers as needed. Accommodates Expedit bookshelves so that they are aligned with the sides of the bookcases at the ends.
10
Add some final touches. Ikea produces several useful accessories for Expedit booksellers. You can add baskets, sliding drawers or basic doors, and everything comes in a variety of colors. Enjoy your new bed!
This bed should only be used by a child, as it can not support extreme weights.

Tips
  • Add the wood of your choice to the corners and you could end up with a beautiful canopy bed (with larger diameter)! All you need to change are turned posts to turn this bed into something incredible.
  • Sand any rough edges so that the bed is smooth.
  • Drill pilot holes before screwing the parts.
  • Color the wood with a color that you like to give it an even more beautiful look.

Things you will need

  • 8 sets of rails perches
  • 4 pieces of wood of 4x4x21 "(10.1 cm x 10.1 cm x 53.3 cm) for the posts at the head and foot.
  • 2 pieces of wood of 2x6x60 "(5cm x 15.2 cm x 1.5 meters) for the rail of the headboard and the foot.
  • 6 pieces of 2x4x8 "wood (5cm x 10.1cm x 20.3cm) for the support blocks
  • 2 pieces of wood of 2x6x80 "(5 cm x 15.2 cm x 2.032 meters) for the side rail
  • 2 pieces of wood of 2x4x80 "(5 cm x 15.2 cm x 2.032 meters) for the support rail
  • 3 pieces of wood of 2x4x80 "(5 cm x 15.2 cm x 2.032 meters) for the support beam
  • 2 pieces of plywood 3-1 / 4'x5 ', 3/4 "(8.2 cm x 12. 7 cm, 1.9 cm)
  • Box of screws for 2-1 / 4 "wood (5.7 cm)
  • 1-1 / 4 "screw case (if the screws are not included with the rail hangers)
  • Mountain range
  • Drill
  • Sandpaper
  • Wood stain (optional)

45MinST 14 Inch Reinforced Platform Bed Frame/3500lbs Heavy Duty/Easy Assembly Mattress Foundation/Steel Slat/Noise Free/No Box Spring Needed, Twin/Full/Queen/King/Cal King(Full)

How to make a laminate bed

Do not you know how to make a bed? Do not miss this Bricomania job on how to make a wenge laminated bed.

Sleeping and resting well at night is essential to be able to face our daily work with energy, therefore, we must pay close attention to the support of our sleep. In this section we will build the structure of a bed of 1m and 35 cm, with chipboard panels veneered in wengé and metal bars. A simple and practical carpentry work that we explain, step by step below.

To make the frame of our bed we are going to use some wickers made of melamine agglomerate ; we will cut the pieces that we need and we will add them with a cantear tape that imitates the same type of wood.



45MinST 14 Inch Reinforced Platform Bed Frame/3500lbs Heavy Duty/Easy Assembly Mattress Foundation/Steel Slat/Noise Free/No Box Spring Needed, Twin/Full/Queen/King/Cal King(Full)
45MinST 14 Inch Reinforced Platform Bed Frame/3500lbs Heavy Duty/Easy Assembly Mattress Foundation/Steel Slat/Noise Free/No Box Spring Needed, Twin/Full/Queen/King/Cal King(Full)




This tape comes without any special preparation and to stick it to the edge, we will use an adhesive putty . We will make some crossbeams that will support the bed frame with iron bars and finally, we will place some legs to the furniture to be able to move it easily.

Tools
  • circular saw
  • Arc welder
  • Welding helmet
  • Metallic brush
  • Silicone applicator gun
  • Electric drill
  • Drill foot
  • Drill for wood of Ø 7 mm
  • Ø 25 mm drill bit
  • Roller
  • Bucket
  • Milling machine
  • Strawberry half-round
  • Drill Ø 10 mm

materials
  • 19 and 30 mm thick melamine chipboard boards in wengé
  • Edging tape
  • 30 X 30 iron tube
  • 4 metal plates
  • 4 legs of bed
  • Anti-corrosive enamel
  • Putty of assembly
  • Eccentric hooks
  • Throat 3.5 x 30 mm
  • Scotch tape
  • Tubillones Ø 10 mm

Step by step to make the structure of a bed

Step 1
We mark and cut the pieces of agglomerate that will configure the structure of the bed; the board that we will use to make the furniture frame will be 30 mm thick and the one we will use for the skirts, 19 mm. To get straight and clean cuts we will use the circular saw.

Step 2
When we have cut all the pieces, we will edify them with a cantear tape that imitates the wengé. Since this one is not self-adhesive, we will fix it to the edge with an adhesive putty . It is advisable that the tape be a little wider and longer than the edge of the board.

Step 3
We will provisionally attach the edging tape with some strips of adhesive tape so that it does not come loose.

Step 4
We also put some jaws to reinforce the union , using wooden slats to prevent the pieces from getting damaged.

Step 5
When the adhesive has dried, we remove both the clamps and the strips of adhesive tape and we cut the edges of the pieces , with the milling machine provided with a half-round milling cutter.

Step 6
We make the holes in the pieces that will configure the frame of the bed, to be able to join them with some eccentric hooks. To perform this work, we will use the tower, the electric drill and a drill bit.

Step 7
Next, we insert the hooks in the holes.

Step 8
We replaced the drill bit with a wood drill and made a through hole for the stem . It is a piece in the shape of a rod that serves to articulate or hold other pieces.

Step 9
Using the same bit we will make a blind hole in the other piece that we are going to join, where we will introduce an expansive nut.

Step 10
With the help of a nylon mallet we insert the nut into the hole.

Step 11
We will reinforce this union with some tubillions , so we will have to make some holes and fill them with an adhesive putty. Next, we will introduce the tubillions using a wooden mallet.

Step 12
Using the same adhesive, we stick the skirts to the wooden base . This mounting putty has a great initial grip and is ideal for sticking wood. In addition, its fast and extra-strong bonding, makes it perfect to apply both indoors and outdoors.

Step 13
Now, we will prepare the crossbeams that will support the bed base, placing some plates at the ends with the technique of arc welding . We protect our faces and hands, with a mask and special gloves for this type of work.

Step 14
So that the welding has a careful appearance we remove the slag well with a tip.

Step 15
After making sure that the surface is completely clean, we apply a black anti-rust enamel with the help of a roller. To work more cleanly, we will wear latex gloves.

Step 16
When the enamel has dried, we place the legs on the crossbars , fixing them with the staples that come in the kit.

Step 17
To finish assembling the structure of the bed , we will join the crossbars to the wooden structure with some screws .

Step 18
In this simple way, we will have built the structure of a double bed with chipboard panels veneered in wengé and metal bars. Of modern line and light aspect, the support of our bed is also solid and very resistant. And, now, rest!

Immune Booster Probiotics for Women and Men - Acidophilus Zinc and Vitamin C Antioxidant to Support Immune System - Best Supplement for IBS Bloating and Gas Relief - 60 Daily Time Release Capsules

The best probiotics Comparison & Buying Guide

Probiotics - Purchase Guide, Opinions and Analysis in 2019

Probiotics are elements present naturally in our body. But when they are scarce, it is necessary to contribute them from the outside so that our body works, since in case of not doing it we increase the possibility of suffering digestive problems and other diseases. That is why it is advisable to have an adequate probiotic supplement so that we do not have problems and with which to strengthen our defenses. And if this probiotic can be as natural as possible and be exempt from unnecessary or not interesting elements in your diet, much better. Within the market, consumers opt for products such as NutriTrust Natural Probiotic, an alternative that can be consumed by vegans or lactose intolerant without inconvenience. It has many benefits to improve the immune system and its components are completely natural. Another interesting product is the probiotic Aava Labs Probiolac , formed with 15 different strains and with a high purity system that helps improve your immune system.



Immune Booster Probiotics for Women and Men - Acidophilus Zinc and Vitamin C Antioxidant to Support Immune System - Best Supplement for IBS Bloating and Gas Relief - 60 Daily Time Release Capsules
Immune Booster Probiotics for Women and Men - Acidophilus Zinc and Vitamin C Antioxidant to Support Immune System - Best Supplement for IBS Bloating and Gas Relief - 60 Daily Time Release Capsules




What are the best probiotics in the market?

Having good digestive health sometimes is not as simple and less so with the hectic pace of life that we lead. Therefore, some people need extra reinforcement when it comes to taking care of their digestive and immune system and they need to take probiotics that help protect our intestine and our body from the proliferation of pathogens and bacteria.

Before asking yourself how much this type of food supplement costs, you should be sure that this will be really beneficial for you and, since in the market the comparison of probiotics is so extensive that it is difficult to know which one is the best, we want to help you by offering you this guide to buy the best probiotic in which you can know what you should take into account before deciding to take this type of supplements.

Type of probiotic

Although all probiotics act directly on the digestive system, the fact is that 80% of the health of our immune system is directly related to our gastrointestinal tract. That is why, although we always get a benefit at the level of the digestive system, not all probiotics are used for the same purpose.

In the market, therefore, you will find probiotics specially indicated to regenerate your intestinal flora, usually composed of strains of dairy origin and that will help us to prevent and cure episodes of diarrhea, constipation, gastroenteritis etc.

On the other hand, we find probiotics that help us give a boost to our immune system in those moments of lack of defenses, such as when we are taking antibiotics or when we frequently get cold or are in treatment of autoimmune diseases.

You can also find probiotics indicated especially for women, since they help prevent urinary and reproductive system infections, as well as the proliferation of candids and even as a treatment for mastitis present during breastfeeding.

As you can see, there is no single type of probiotic, but, depending on the composition of the probiotic, it will be more suitable for one of these purposes. For this, before buying any of them, you must be clear about what use you want to give and what benefits you are looking for in it, so that you really notice that improvement.

Concentration of UFC (Colony Forming Units)

Another very important point to take into account is the concentration present in the chosen probiotics. And is that, since not all probiotics are used for the same purpose or have a similar composition, the concentration of colony forming units will not be the same in one as in another.

It is always advisable to opt for those products that offer you a large amount of CFU per tablet or capsule, as this will make the daily dose is reduced to the maximum, even only 1 tablet a day and therefore, not only will the container last longer , but you will notice the benefits of this supplement in your body much earlier.

Generally, this concentration ranges from 10 billion CFU to 30 billion CFU per tablet or capsule. So, depending on the use you want to give, look for those whose concentration is higher.

In addition, it is important to make sure that the lining of the tablets or capsules is steric, that is, it will not dissolve in your stomach but in your small intestine, which is where all the probiotics are really absorbed and where they will be really beneficial for you and your health.

Treatment duration

Before continuing and paying attention to the recommendations that all manufacturers include in their products, it is important to know that, although it is a nutritional supplement, it should never replace a model of cooking and healthy living and that it is also recommended that Talk to your doctor before taking this type of supplement, especially if you have a mild illness that seems. And with that said, we continue with the next point of this guide.

When we talk about duration of treatment, we refer to the amount of tablets or capsules that each product brings. And, while some brands bring treatment for about two weeks taking between 2 and 3 pills daily, others offer treatment for 6 months or a year with a single daily intake, a very interesting option if you must take this type of food supplement for a long period of time.

This duration will also depend, as we explained before, on the concentration present in each pill, therefore, the higher the concentration, the fewer daily doses you will have to take and your probiotic will last much longer.

Always opt for those brands that offer you a greater number of pills for the same price, but above all that these have a good concentration and therefore the daily intake is limited to one tablet.

What are the best probiotics of 2019?

If you lead such a busy life that you need a boost to protect your digestive and immune system from germs and bacteria and feel more secure in your day to day life, you will want to know which is the best probiotic for you and find the best probiotic of the moment. For this and after a thorough study, we have selected for you the best probiotics of 2019 among which you can choose the one that best suits your needs to improve your defenses and your intestinal flora.



Natural NutriTrust

Main advantage:

The most striking aspect of this option is that its components are completely suitable to be consumed by vegans and lactose intolerant, offering freedom of use.

Main disadvantage:

Probably, for some, its main disadvantage is that the boat barely contains 30 capsules, so they would have to acquire it monthly to keep the treatment active.

MAIN FEATURES EXPLAINED

Components

The consumption of probiotics is increasingly common in homes around the world thanks to the benefits they bring to health. Even if you or your family are in good condition, you will never reinforce some systems. If you want to buy a bottle of probiotics, the first thing you should know are its components.

In the case of the option offered by the NutriTrust brand, we have a bottle of 30 capsules. Each of the capsules contains one million CFU, that is, colonies of beneficial bacteria for health.

In addition to this, you should know that 100% of the ingredients of these probiotic capsules are 100% vegan and do not contain milk, so they are safe to consume for those who suffer from lactose intolerance or have a philosophy of life of consumption different to most.




Elaboration

Another detail that you should keep in mind when you are going to invest in a bottle of probiotics for your consumption or that of your family is the process of making the capsules. The more manipulation there has been, the less purity components can offer.

Therefore, we consider it an advantage that the NutriTrust probiotic does not contain elements unrelated to its main ingredients. Likewise, for the elaboration of this product a series of minimum steps were followed to avoid affecting the purity of the capsules.

It also does not contain fillers or unnecessary additives, which guarantees that your body will be receiving what it needs and nothing more than that. All content has a high quality standard, as well as a rigorous quality process.

And if you are pro-environment, you will be pleased to know that all the ingredients are obtained from renewable sources and the package is 100% recyclable.

Presentation

For some buyers, it is also important to consider the presentation of the probiotic bottle. This is usually evaluated based on whether you travel frequently, if you have space in the kit or if you do not want children to handle the bottle.

With the purchase of the NutriTrust option, you will get a small recyclable cardboard box in case you want to contribute your bit to the conservation of the environment. Both the box and the boat have a similar design with a combination of green and white for easy identification of the content.

As for the material, the bottle containing the capsules is made of brown glass and its lid is made of aluminum, so it offers security to prevent the container from opening accidentally even if you carry it in your handbag.





Aava Labs Probiolac

The probiotic Aava Labs Probiolac is another product interested to give extra protection and care to your body. This probiotic has a composition based on 15 different strains and with an approximate concentration of 30,000 million CFU, enough, therefore, to provide your body with the additional care it needs.

A few strains and a probiotic that takes care of your body, improve your digestive system and give them a help to your defenses. However, the pills do not include anything that should not be such as lactose, soy, gelatin or genetically modified organisms. Therefore, these pills are suitable for vegans and for people with different food allergies or intolerances.

A product that comes in a bottle of 60 capsules, enough, therefore, for a couple of months of treatment.

Designed to strengthen your digestive system and your overall health, let's learn more about the benefits of this product

Pros
Origin:
This probiotic has been made with 15 different strains, so it includes all kinds of elements suitable to improve your digestive health status.
Prolonged release:
The prolonged release system of these pills keeps the effect of these capsules active longer and more effectively.
Ingredients:
In the composition of these capsules we find nothing that should not be, being suitable for vegans and being free of genetically modified organisms.


Cons
Product Information:

According to some users, the product information is somewhat scarcer than it should be.
Effects:
Depending on the specific needs of each user, it is possible that the improvement generated by the product is delayed a little more, being necessary more time of treatment.






Nutravita Pure Cultures
This product of the brand Nativa is presented in a bottle of 180 capsules so you have enough to complete several months of treatment. They are composed of beneficial ingredients for the improvement of the immune system, thus helping to avoid viral diseases, such as influenza.

Each of the capsules contains 2 trillion CFU, that is, healthy bacteria-forming colonies. Also, all ingredients have purity and no extra chemicals have been added, so they do not have contaminants.

The boat has dimensions of 2.4 x 4.6 x 10 centimeters so you can take it in your bag or accommodate it in your bathroom and so do not forget to take your probiotics in the morning or when you are traveling away from home. In addition, it is highlighted that it is transparent, making it easy for you to see how many capsules are left and thus acquire a new bottle before your supplement is finished.

Consuming probiotics can help improve your overall health, whether you want supplements to energize you or strengthen your system.

Pros
Quantity:
With the purchase of this product you will obtain a total of 180 probiotic capsules so that you can maintain your treatment for several months.
UFC:
Each of the capsules of the boat has 2 trillion CFU, that is, it will have a significant impact on your body.
Boat:
Your boat is comfortable to use and also to transport so you do not skip days and keep concurrence with the consumption.


Cons
Price:
You must bear in mind that it is the most expensive probiotic in the list.
Gluten:
Some buyers indicate that it is not specified if the capsules contain gluten, a detail to be considered by those who are sensitive to it.






Plastimea Nutri + Actibior Pro-Immun

This probiotic is a potent protector of the digestive system that acts as a barrier to the intestinal mucosa producing mucus that pathogens enter your intestine. Your intestinal flora is balanced and thus favors the correct digestion of food and the elimination of waste and toxins from your body.

This probiotic comes in a convenient container in which you can find 60 capsules of plant origin with synergy by association of strains lactococcus lactis, Lactobacillus casei, Lactobacillus acidophilus and Bifidobacterium bifidum, all from the family of lactic bacteria, which will protect, so , both your digestive system and your immune system, will protect the intestinal mucosa and help you to prevent food allergies and intolerances.

Among the probiotics in capsules present in the market, this brand offers you the complete treatment for a month since the recommended daily dose is 2 capsules daily taken with a large glass of water, so you will not have to worry during all that weather.

For many, the effects and quality of this option make it worthy of the position of the best probiotic of the moment, in addition, it is also one of the cheapest:

Pros
Composition:
This option among the best probiotics presents a composition of different bacteria and yeasts, among which are lactococcus lactis, lactobacillus casei, lactobacillus acidophilus and bifidobacterium bifidum. All of them focus on the improvement of the intestinal environment and the correct growth of its flora.
Bacteria:
As indicated by the manufacturer, each of the Actibior Pro - Immun capsules contains up to 10.5 billion bacteria, so that an absolute presence in the stomach and other organs that can benefit from the advantages of the probiotic drug is guaranteed.
Benefits:
These probiotics promise to improve the digestive system and functioning in general, so that it is easier for you to process the food. In addition, it promotes the correct elimination of natural toxins, making you feel more active and much healthier.
Capsules:
Each bottle of Actibior Pro - Immun contains a total of 60 capsules. The dosage recommended by the manufacturer is two capsules per day, which would get treatment for a full month.
Dimensions:
And if you have to go on a trip and want to keep your probiotic intake, the Actibior Pro - Immun comes in a small pot of 5 x 5 10.4 centimeters and a weight of 50 grams, so you can comfortably carry it in your suitcase or handbag.






Navit Plus Defenses


The Navit Plus Defenses tablets are a probiotic manufactured in Spain and with sanitary registration with which we can have the corresponding tranquility of a product controlled correctly.

Inside we have 60 capsules with a concentration of 10,000 million CFU from various strains, which help you improve your digestive health and the state of your body, in general.

In particular, the main strains included are those of Lactobacillus and Bifidobacterium, although they are combined with others to give your body that much-needed extra. Therefore, you only need one daily pill to obtain these benefits. So thanks to the 60 capsules included in the bottle you can have treatment for a couple of months at a price that is also interesting, in relation to other probiotics in the market.

If you prefer a product manufactured in Spain and properly controlled by the national health authorities, this probiotic is an interesting option.

Pros
Concentration:
These pills have a concentration of 10,000 million CFU with which it is easy to give a boost to your immune system.
Presentation:
This product is presented in a bottle of 60 capsules, enough for two months of treatment.
Sanitary registration:
The laboratory that manufactures the product is registered with AECOSAN as a sanitary company, being a product of national manufacture.

Cons
Unwanted ingredients:
Depending on the composition of the product, it includes some elements such as dyes and binders.
For vegans:
The product does not indicate that it is certified for vegans, although a priori it does not seem to have any ingredient of animal origin.






How to use a probiotic

The human organism is a complex, but balanced, system capable of defending itself against attacks by bacteria or other elements that may alter its functioning. However, it also requires help when the use of antibiotics, for example, alters that balance making these bacteria scarce. This is how probiotics naturally reinforce this system.

What are the probiotics for?

Basically, probiotics serve to balance the natural bacterial systems of the body that intervene in the defense against agents or elements that can affect your health. That is why these microorganisms contained in capsules, or in any other presentation, help greatly to restore the bacterial flora of the intestines, as well as the vaginal one, when you have suffered an infection or your balance is affected by some medication.

Probiotics also intervene in the proper functioning of the digestive system, improving the digestion process. They help in the absorption of food, as well as in the assimilation of some vitamins and supplements that improve your health, thus strengthening the entire immune system. In general, probiotics are indicated to treat gastroenteritis and diarrhea when it is caused by infections, irritable bowel syndrome, cystitis and vaginal infections.

How to consume them

If you are going to consume probiotics by prescription of a doctor, this will surely give you the indications of how to take them; follow his instructions to the letter. If you are going to use these probiotic supplements on your own, read the instructions contained in the box of the probiotic that you have chosen or that you consider will help you to restore your health.

It is also important that you do not consume it fasting. Eat the foods you use and take the probiotic you bought just before or during the meal. For a better digestion or release process of microorganisms, you must consume foods with a reduced fat content.

Risks of excess probiotics

Although probiotics help to balance your health, consuming them in excess can be contraindicated, producing conditions of greater relevance than those you want to treat with these probiotic supplements. That is why it is important to follow the indications for use, either from the treating doctor or those given by the manufacturer of the product on the label.

For example, an excess of probiotics can cause severe diarrhea as an immune system response to get rid of bacteria that are not characteristic of the flora or that are too abundant to maintain the balance of the system.

Care you must have

It is very important that you do not consume probiotics without first having eaten food or taking them just before eating. Nor should you exceed the time period or the recommended doses. Do not swallow the probiotic with acidic drinks.

Keep the capsules or supplement in a cool place away from any source of heat. Follow the manufacturer's instructions for preservation. During the duration of the therapy, try to consume a lot of fiber to reinforce the action of probiotics.

The most popular brands

Through a diet rich in probiotics you can add to your body the resources you need to fight a lot of intestinal ills, but it is not about buying the first product you see, but rather to investigate which ones are best for you. That is why we have analyzed the most popular brands of probiotics on the web and then present the information collected with the intention that you can make a better choice.

When we talk about famous brands of probiotics, Renew-Life is one of the leaders and one of the favorite options of users around the world; As a company, it was founded in 1997 in the city of Florida, USA. UU Since then the main motive has been to improve the health status of people, helping them to keep their bowels in optimal operating conditions; during the last two decades they seem to have achieved this promise.

All its formula is made with top quality ingredients so you can get the best benefits of each. Its product catalog is composed of high potency probiotics, fibers, digestive aids, enzymes and internal cleaning products.

Among the most popular probiotics you can find some focused on men, women and children, others for daily care and others for more specialized care; consequently, it will be easy to find one that fits completely with you.


Garden of Life is considered by many as the number one brand of the naturist industry, has at least 11 official certifications that endorse the good quality of its products.

The brand has a line called Raw probiotics that are mixed, stored and transported at controlled temperatures to maintain nutrients, enzymes and probiotic strains in the best possible state, thus being able to offer better health benefits.

The success of the brand is due to the effort it puts into producing real foods, avoiding any synthetic formula created in a laboratory; they never compromise the health of their clients, so they do not mind having a slower production process and doing everything by hand.

Among the principles that define them you can find: analyze the food that our body really needs; understand that clean is healthy and, finally, know at all times the sources from which each of the ingredients comes.


GT Dave was raised as a vegetarian, from an early age his parents initiated him into the principles of Eastern philosophy, a fact that allowed him to adopt a more spiritual vision of the world, as well as great respect for all living beings.

The inspiration to create natural products formulated to support the digestive and corporal well-being would come from inspiration of his own mother, who would have used a homemade drink to reduce the negative effects of the illness she suffered. In 1995, with only 15 years, GT Dave began to bottle his Kombucha in the kitchen of his parents' house south of the city of California.

After 22 years of action, the small lots of GT's Kombucha continue to be distributed and hundreds of people continue to benefit from the positive effect it brings to their lives. So far, the company has 2 star products, on the one hand, Kombucha, a tasty and naturally effervescent tea with probiotic action; The other product is Kefir, a fermented product rich in probiotics and made from fresh coconut.

Frequently asked questions

Q1: Do probiotics extend life?

According to studies carried out by CONICET and the National University of Rosario in Argentina, the Bacillus Subtilis probiotic bacterium has the ability to slow aging, prolong life and maintain vitality by simply colonizing the human intestine.

Experts have proven that this probiotic increases life expectancy from 80 to 120 years in a healthy way. In Japan, natural products fermented with this bacterium are regularly consumed, which shows the beneficial effects in people, since this ethnic group has a longevity index higher than the world average.

Q2: Is it safe to consume probiotics during pregnancy?

Researchers from Canada conducted a meta-analysis and concluded that there is no contraindication to the use of probiotics during pregnancy or during breastfeeding. Their studies determined that there is no association that relates this treatment with gestational age, birth weight or with miscarriages and congenital malformations.

The use of probiotics, either in food supplements or in natural foods, helps the digestive system of the mother to work in an optimal way, eliminating bad bacteria. Likewise, they are capable of restoring the bacterial flora during episodes of diarrhea.

Q3: Is there any relationship between the use of probiotics and alcohol?

Excessive consumption of alcohol can seriously affect the health of people and cause irreversible liver damage; but it can also alter the normal balance of the intestine. The use of probiotics can help counteract the serious damage caused by alcohol in the digestive system and help restore the recommended levels of good bacteria.

Alcohol increases the amount of stomach acids, which affects the risk of peptic ulcers and gastritis. It can also cause indigestion, nausea and vomiting; so ingesting probiotics can be of great help to regularize the bacterial flora inside the intestines. However, it should be remembered that excessive consumption of alcohol could damage other organs and also affect the social life of the person.

Q4: Probiotics and their benefit for constipation

Constipation affects many people in the world and occurs when there is an imbalance between the levels of the billions of bacteria that inhabit the intestine. The use of probiotics favors the production of lactic acid and fatty acids, which reduce the pH in the colon, increase peristalsis and improve intestinal regularity.

Many experts recommend probiotics that contain species such as Bifidobacterium and Lactobacillus, since they are capable of increasing mucosal secretion from the conversion of bile salts, which helps to improve the causes of constipation and to eliminate stools naturally.

Q5: Are probiotics help to lose weight?

The studies carried out with probiotics show that they are efficient when it comes to helping us lose weight and eliminate the accumulated fat in the abdomen. Some probiotics of the Lactobacillus family can inhibit the absorption of fats from meals, which favors the increase in the amount of fats that are excreted in the faeces. Foods such as yogurt fermented with this bacteria can help reduce body fat by up to 4% over a period of 6 weeks; as shown by a study conducted with 125 people who were on a diet regimen.

Q6: Probiotics and their effect during chemotherapy

Chemotherapy is characterized by attacking cancer cells (those that divide rapidly and in a disorganized manner), but it also affects healthy cells, including the cells of the digestive tract. This damage caused by chemotherapy causes inflammation, pain and diarrhea, since the intestines are not able to absorb nutrients efficiently. In these cases, the consumption of probiotics can help relieve diarrhea associated with the effects of chemotherapy.

However, although it is demonstrated that the consumption of probiotics is beneficial for the vast majority of people, when dealing with patients with cancer, great care must be taken with their administration. This is because chemotherapy damages the bone marrow and compromises the immune system, so that some bacteria present in probiotics, could cause infections in the blood and heart. For this reason and in the face of this potential risk, scientists work to determine which strains are the most suitable for these cases.