45MinST 16 Inch Tall SmartBase Mattress Foundation/Platform Bed Frame/3000LBS Heavy Duty/Extremely Easy Assembly/Box Spring Replacement/Quiet Noise-Free, TXL/Queen/King (Full)

How to make a wine wood frame Cork Trivet

Recycle the wine corks used for the construction of them a placemat. Trivets are used to hold hot pots and pans when they come out of the oven or the stove. They help in protecting your counters from burns. Build your own table-top frame using small pine boards and thin plywood. Build the frame to celebrate any set of cork stoppers. In general, 144 corks will give you a table mat that is 10 by 10 inches. Counting and measuring your corks is required before designing your trivet frame.



45MinST 16 Inch Tall SmartBase Mattress Foundation/Platform Bed Frame/3000LBS Heavy Duty/Extremely Easy Assembly/Box Spring Replacement/Quiet Noise-Free, TXL/Queen/King (Full)

Instructions

1 Measure the diameter of your corks and determine the length and width of your square placemat frame. The length and width of the inner part of the frame will be the same.

2 Cut two tables to equalize the measurement inside the table mat. Cut the other two boards in this length plus .5 inches. Position of the two longest boards on the edge, parallel and spaced equal to the length of the two shorter plates. Set the two tables shorter and on the edge between the first pair at a right angle. The corners are flush. Glue the boards together in this position.

3 Measure the length and width of the four boards and cut the plywood for this measurement using the table saw. Use the fence as your guide when cutting these plates.

4 Adjust the wood at the top of the boards so that the edges are flush with the faces of the wood. Glue the plywood to the boards in this position. Your wine cork frame is ready for corks to be stuck on it.

Tips and warnings

•     Wear safety glasses when using power tools.

eLuxurySupply Wood Bed Frame - Made in The USA w/100% North American Pine - Solid Mattress Platform Foundation w/Pressed Pine Slats - Tool-Free Assembly - California King

How to make a wooden bed frame size Toodler

Disburse hundreds, if not thousands, of dollars for all the furniture you need for your baby: changing table, crib, bassinet, car seat, and high chair. Before realizing it, she has grown out of that crib and needs a child's bed. That's frustrating, but you can build a simple child's bed during a weekend. You can also expand in bed with additional extras, such as lanes, decals or steps.



eLuxurySupply Wood Bed Frame - Made in The USA w/100% North American Pine - Solid Mattress Platform Foundation w/Pressed Pine Slats - Tool-Free Assembly - California King

Instructions

1 Sand all sides of each piece of wood to avoid splinters.

2 Paint your wood and let it dry overnight. Use approved non-toxic paints for infants and young children, available at most home improvement centers.

3 Place the four beams in a rectangle with the shortest beams inside the longest beams.

4 Fix the joists with two wood screws at each corner, drilling through the long side of the beam and at the end of the short beam.

5. Place the sheet of plywood on top of the frame. Screw in place with a screw in each corner.

6 Reinforce the plywood with a screw in the center of each short side and the two screws spaced evenly along each long side.

7 Put a message in the corner of the frame, located in the angle formed by two beams.

8 Place the pole with four screws, driven through the plywood and at the end of the post.

9 Repeat step eight for the other three positions.

Tips and warnings

•     The low height of this bed design makes unnecessary lanes. If you feel the need for them, you can screw a 1 inch by 12 inch by 30 inch board to the sides of your frame, forming a protective barrier near the head of the bed.

ZIYOO 14 Inch Wooden Slats Platform Bed Frame, 3500lbs Heavy Duty, Strengthen Support Mattress Foundation, Quiet Noise Free, Full

How to make a Japanese wooden bed frame

The Japanese have a simple style when it comes to furniture. The wooden frame of the bed is flat and unadorned or attached and often is nothing more than wicker mats placed on the floor at night and folded and stored during the day. The modern style of the Japanese flat bed has a frame that raises the flat wooden platform a few inches from the floor, but continues the tradition of having a flat surface on which are placed a futon shiki mattress and kakebuton dildo.



ZIYOO 14 Inch Wooden Slats Platform Bed Frame, 3500lbs Heavy Duty, Strengthen Support Mattress Foundation, Quiet Noise Free, Full

Instructions

Build the frame

1 Attach a 75-inch long 2 x 6-inch pine board to six 39-inch-long pine boards by 2 inches by 6 inches with 3-inch wood screws using an electric drill. Place the first and last 39-inch boards flush with each end of the 75-inch board and the other four 39-inch boards at approximately 15-inch intervals between the terminal strips.

2 Place a second pine board 2 x 6 inches 75 inches from the free ends of the six 39-inch boards. Make the ends of the second 75-inch plate level with the first and last 39-inch boards. This creates a 6-inch-tall wooden box frame.

3 Place a 2-by-2-inch, 6-inch-long pine board in each of the four inside corners of the box frame, not next to the four support boards. Plug them into the sides of the box with two 3-inch screws, being careful not to pierce the screws that hold the two side boards together.

4 Place a 4 by 8 foot piece of 3/4 inch thick birch plywood on two easels, and divide it into a 45 by 81-inch rectangle with a circular saw. Laying the wood on the ground.

5 Adjust the wooden box on the top of the plywood with a tape measure to center the box with a 6-inch outer edge. Use a pencil to trace where the box was placed, including those on the interior support boards. Remove the wooden box from the plywood.

6 Place a 45-inch long pine board 1 by 10 inches to the two shorter ends of the plywood rectangle, on the side without the drawing, with 1 1/4-inch wood screws in the corners at 6 o'clock inches intervals.

7 Mount two 61-inch long 1-by-10-inch pine boards on the longer edges of the plywood, on the side without the drawing, and screw these boards into the plywood with 1 1 wood screws / 4-inch in the corners part and in 6-inch intervals. These edge plates provide additional support.

8 Place the wood on top of the wooden box, with the side with the drawing facing up, away from the box, and center the plywood with a 6-inch lead around the wooden box. The drawing should be above the real wooden box.

9 Place the plywood for the wooden box with 3-inch wood screws and an electric drill at 10-inch intervals. Avoid the corners of the box.

10 sand all edges and corners of the bed frame with fine-grained sandpaper.

11 of the frame stain of the Japanese wooden bed with the chosen color of the wood stain using a brush and even strokes.

Tips and warnings

•     The measurements are used for a double size mattress. Add 15 inches to the width of a full-size mattress, add 21 inches across and 5 inches to the length of a queen, and add 36 inches across and 5 inches to the length of a double mattress.
•     Add 1-by-1-inch pine boards to the top plywood shelf on the edges of the drawing if you plan to use a mattress instead of a shiki pad to prevent movement.
•     Always use protective equipment when working with wood.

Zinus 14 Inch SmartBase Mattress Foundation/Platform Bed Frame/Box Spring Replacement/Quiet Noise-Free/Maximum Under-bed Storage in Warm Grey, Full

How to make a sturdy frame wooden bed

A bed frame supports your mattress and keeps it off the floor. Some bed frames even come with a headboard or footboard to add to the decor of the room. If you are not satisfied with the selection of bed frames at your disposal and have some knowledge of working with work, you can make your own, saving you money and customizing the structure to fit your bedroom decor . The frame of the bed has to be sturdy to ensure that it does not collapse and that it does not wake up on the floor the next morning.



Zinus 14 Inch SmartBase Mattress Foundation/Platform Bed Frame/Box Spring Replacement/Quiet Noise-Free/Maximum Under-bed Storage in Warm Grey, Full

Instructions

1 Place the four 2 by 4 tables in a rectangular shape with the two longest boards on the sides of the frame and the two shorter boards at the top and bottom. Place the shortest boards within the longest boards and put all the pieces on the thinner side, which measures 2 inches.

2 Make two wood screws in each corner of the rectangle. Place the screws approximately 2 inches apart from each other and drill from the outside of the beam longer to drive them towards the center of the shorter beam.

3 Place the piece of wood on top of the frame. Fix it to the wood with a screw in each corner of the rectangle. Drill down so that the screw passes through the plywood and into the wooden beams.

4 Attach the plywood by placing a wooden screw in the center of each of the shorter bundles and two screws in each of the larger bundles, spaced evenly apart.

5 Turn the frame on its side so you can access both the inside of the frame and the top of the plywood.

6 Place a message in the corner of the frame where the two beams meet. Fix it in place with four wood screws driven through the surface of the plywood and into the post. Add reinforcement with two additional screws driven through the short beam into the post and two more screws driven by the beam length in the pole. Repeat this procedure for the other three corners.

7 Place an additional post in the center of one side of the frame, placing it flush against the length of the beam. Pull on the four screws on the back through the plywood. Drive three additional screws at the entrance through the beam. Repeat for the other three sides of the frame.

Tips and warnings

•     These instructions are for a double bed frame. Adjust the measurements to accommodate a twin, double bed or extra if necessary.

Zinus Arnav Modern Studio 10 Inch Platform 2000 Metal Bed Frame / Mattress Foundation / No Box Spring Needed / Wooden Slat Support / Good Design Award Winner, King

How to make a child-Sized wooden bed frame

Once a child is able to leave his crib by himself, the passage to a bed is necessary. Since a small child size bed is smaller in size and closer to the floor than a normal single size bed, it can be a safer alternative for parents who wish to transition their child from the crib to a bed. In addition to housing the crib mattress you already own, building a child's bed frame from affordable materials that are readily available at home improvement stores makes it a cost-effective option for parents, too.



Zinus Arnav Modern Studio 10 Inch Platform 2000 Metal Bed Frame / Mattress Foundation / No Box Spring Needed / Wooden Slat Support / Good Design Award Winner, King

Instructions

1 Cut the wood for the frame of the box. Use a tape measure to find 55 ½ inches from the end of each 2-by-8 and mark with a pencil. Cut to the location of each pencil mark with a circular saw. With the wood remaining from 2-by-8, measure the distance from one end to 28 inches and mark with a pencil on each piece of wood. Cut in each pencil mark.

2 Place the frame parts together. Use a drill and 2 ½-inch cover screws to secure the 55 ½-inch pieces of wood for the 28-inch pieces of wood to create a rectangular frame. The frame should measure 55 ½ inches long and 28 inches wide. Use two cover screws at each end when securing.

3 Measure and mark in 28-inch increments from one end of a 2-by-4 to four 28-inch segments have been measured. Because each 2-by-4 is 96 inches long, two 2-by-4's will be required for this step. Use a circular saw to cut into each pencil mark. These form the mattress supports.

4 Secure the mattress supports. Place a 28-inch mattress support on each end inside the bed frame and place from the inside with cover screws. Measure 18 inches from each end and insert the third and fourth mattress supports. Drill a shallow hole in the place where the intermediate supports are screwed into the frame before fixing with cover screws. Make sure that the mattress supports are flush with the bottom of the box frame before fastening with screws.

5 Insert a dabbed wooden plug with wood filler into each hole to hide the screws.

6 Cut the corner posts. Measure and mark two 27-inch pieces and two 20-inch pieces, the 2-by-4. Cut into each pencil mark with a circular saw and sand the edges to remove rough areas.

7 Place the posts in the corners of the ends of the box frame. Place a corner post 27 ¾ inches on either side of one end of the frame and a corner post 20 ½ inches on each side of the opposite end of the frame. Measure 5 ¾ inches from one end of each corner post and use a pencil to mark the location. Drill a shallow hole in each pencil mark to accommodate a wooden dowel before using cover screws to secure the post to the frame. Drill a second hole a few inches above the first and fix with a screw.

8 Insert the dabbed wood plugs with wood filler to cover the screw holes.

Header and feet pieces 9 Cut. Measure and mark three segments 31 7/8 inches, the 2-by-4. Use a circular saw to cut into each pencil mark. Use sandpaper to sand each piece until it is smooth.

10. Join the head and foot pieces. From the top of the posts at the longest corners, measure 8 ¼ inches down and mark with a pencil. The upper part of the lower head piece must be level with this mark. Fix with a cover screw for each post, drilling a small hole for the first time for a wooden plug. From the top of the same corner posts, measure 2 ¼ inches down and mark with a pencil to find the location of the top of the top head piece. Measure 1 inch down from the top of the shorter corner posts to find the location of the top of the foot of the bed. Place all plates with cover screws and cover with wooden plugs.

11. Join the plywood support. Place the inside plywood of the frame on top of the mattress supports and secure it with wood screws.

12 to stains or paint. Apply a latex paint with a brush or a finish with a wood stain followed by a final layer of polyurethane protection.

Tips and warnings

•     Measure from the inside of a corner post inside the other to determine the exact width of the head pieces, as they may vary slightly from 31 7/8 inches.
•     Sand the outside of the joints and all the edges.
•     Use any standard crib mattress.

Best Price Mattress Twin XL Bed Frame - 14 Inch Metal Platform Beds [Model E] w/ Steel Slat Support (No Box Spring Needed), White

How to make a canopy bed frame

A frame of the canopy bed is a romantic and attractive bed treatment that can dress any room. If you always wanted a canopy bed frame, but assumed it would be too expensive, there are affordable ways to create a canopy bed frame. Learn how to make a canopy bed frame from which you can hang cloth panels to make a canopy bed of any type of bed.




Best Price Mattress Twin XL Bed Frame - 14 Inch Metal Platform Beds [Model E] w/ Steel Slat Support (No Box Spring Needed), White

Instructions

1 Measure the length and width of the bed. Write down these numbers.

2 Cut two lengths of PVC pipe in the width measurement taken in Step 1. Cut two lengths of PVC pipe in the length measurement taken in Step 1. Present the cut ends of the pipe so that they are smooth.

3 Install ceiling hooks on the ceiling by screwing the hooks over each corner of the bed.

4 Cut eight 12-inch lengths of fishing line. Tie the ends of each length of fishing line securely and securely together to make eight turns of fishing line.

5 Place two line loops on each hook that hangs from the ceiling.

6 Place the PVC pipes on the fishing line loops. The two longitudinal lengths of PVC pipe hang from the fishing line above the loops on the sides of the bed. The two lengths of PVC tubing hang from the fishing line loops above the top and bottom of the bed to finish the frame of the four-poster bed.

Zinus Lorelei 14 Inch Platforma Bed Frame / Mattress Foundation / No Box Spring Needed / Steel Slat Support, Twin

How to make a homemade water bed frame

One of the most difficult to find, and most expensive pieces of bedroom furniture is a water bed frame. While many companies have started making frames to match most of the sets, it is still not guaranteed that a person can find what they are looking for. So with a few tools and some know, most people can frame themselves for much less than buying.



Zinus Lorelei 14 Inch Platforma Bed Frame / Mattress Foundation / No Box Spring Needed / Steel Slat Support, Twin

How much does it weigh?

The first thing to consider when raising a water bed frame is the total weight of the bladder when it is full. The traditional California king bladder water bed weighs 1857 pounds when filled. The next thing to think about is the amount of space required to support this weight. A house that is built for the normal building code can support 54 pounds per square foot of surface. Therefore, going with that ideal, a California King mattress would need about 36 square feet of floor space, or an area of ​​66 inches by 78 inches, to ensure the bed stays in the room and not underneath. Now that we know the dimensions of the base, we can determine what needs to be done to build it.

How to build it?

Now that the weight issue is decided, the actual construction can begin. In order to properly build a strong water bed frame, everything has to be screwed with at least 1-1 / 2 inches screws. Therefore, the base should be 66 inches by 78 inches, and the second level should be 72 inches by 84 inches. This difference leaves a 6-inch cantilever all the way around the frame. For wood, the lower section of the frame should be constructed from 2 inches by 6 inches of standard lumber construction, and the top of the frame has to be constructed from 2 inches by 12 inches of standard lumber and 2 inches by 4 inches of standard wood. Now, for the assembly.

How to ride?

The first layer of the frame is constructed as a normally framed wall. The wood will be on the edge, with additional supports every 12 inches through the short length. After all that is bolted together, the base needs a face covered with 1/2 inch plywood. Now the second layer has to be built. The second layer is framed on the side with 2 x 12 wood, and then the 2 x 4 supports run through the short length every 12 inches. Once the brackets and frame are screwed together, place the second layer over the first, not forgetting to leave a 6-inch cantilever in all directions, and the screw from the top to the bottom. Now cover the supports with 1/2 inch plywood, and the bed is ready to support the weight of a waterbed. Remember to build this bed in its place, or as close as possible. Once built, this frame will weigh around 200 pounds. This frame can also be used for a standard mattress or made smaller to fit different beds.

Best Price Mattress Full Bed Frame - 18 Inch Metal Platform Beds w/ Heavy Duty Steel Slat Mattress Foundation (No Box Spring Needed), Black

How to build a frame of water beds

There are two main reasons to build your own waterbed frame. The first would be the coast. It may be cheaper just to do it yourself. The second reason is for flexibility and custom construction. It can be difficult to find exactly what you are looking for and need in a waterbed frame.



Best Price Mattress Full Bed Frame - 18 Inch Metal Platform Beds w/ Heavy Duty Steel Slat Mattress Foundation (No Box Spring Needed), Black

Instructions

1 Get the right measurements so you are sure to buy the right kind of wood in the correct thickness and length. Get the cut wood at your local hardware store. This will save you a lot of time and effort later. You may want to dye all the wood before beginning construction. The size of your frame will depend on the size of the water bed you want to build: full or individual, queen or king. Single-size water bed dimensions are 48 inches wide by 84 inches long. Queen size water dimensions are 60 inches wide by 84 inches long. King size water bed dimensions are 72 inches wide by 84 inches long. Decide what bed you need and then have your cutting boards, or they cut you, to the proper length.

2 Start to build the frame. The frame only includes the area the waterbed will be in. Do not confuse this with the header. Connect all parts of the frame using wood glue, nails and, if you want it to be safer, screws as well.

3 Create your frame first and connect with each other. The way to add shelves is entirely up to you. This is the part that can be customized to fit exactly what you want and / or need.

4 The pedestal must fit inside the waterbed frame. Use several pieces of wood that will be approximately the same height as the frame itself. Interlock these pieces and secure together.

5 The water bed frame cover should be about ½ to 30 centimeters longer and wider than the pedestal. The cover is basically flat pieces of wood firmly attached to each other and placed on top of the pedestal. Make sure that this wood is sanded properly first. Make sure the cover is securely attached to the pedestal.

6 Make sure everything is connected correctly before this step. Place the frame on the top of the cover. Create the support legs of the headboard and attach to the structure. Attach the head of the bed to the structure and support legs.

Tips and warnings

•     Present to your exact plans before you start.
•     Always use wood work safety measures every time you are building.

DUMEE Queen Size Metal Bed Frame Platform Modern American Style Mattress Foundation with Headboard and Footboard Box Spring Replacement Black Textured

How to build a 2x4 bed frame

Do you want something more than a mundane metal structure? Do you want it cheap? Here is a quick and easy 2x4 bed frame that looks good and does not break your budget.



DUMEE Queen Size Metal Bed Frame Platform Modern American Style Mattress Foundation with Headboard and Footboard Box Spring Replacement Black Textured

Instructions

1 Cut the 2x4 pieces to the length. This size may vary depending on the size of your bed.
Cut 2 side rails slightly longer than your box springs.
Cut 2 more lanes (for the head and feet) slightly less wide than your boxsprings.
Cut 5 additional lanes 3 inches longer than the head and foot rails
Cut 8 feet (let's use 2 @ each corner) to your liking (6 - 12 inches would be normal).

2 sand all surfaces.

3 Build the feet. Combine 4 sets of 2 of your shortest cuts. Make sure they are even on all sides (especially the top and bottom).

4 Build the base. 2 Attach your longest and shortest 2 make a rectangular box that is slightly larger than your box springs.

5 Fix the leg stand.

6 Add the slats. Set the remaining pieces on top of the base. They must match evenly with the two long bands. To attach.

7 Fill all the holes with wood putty (if you want).

8 paint or the stain of your liking. Finish with a couple of coats of lacquer for durability.

Tips and warnings

•     Never paint or stain without proper ventilation.

SLEEPLACE 18 Inch Tall Heavy Duty Steel Slat Bed Frame ST-3000 (Full)

How to build a bed frame De Estantes

Recycling is a good way to do something new from something that you no longer use for your original purpose. For example, you can take an old shelf and turn it into a brand new bed frame. You can take the bookshelf and attach it to a Hollywood frame to make a headboard and footboard of the bed. Using the bookshelf, you give yourself a little extra storage space for books, lamps and even blankets.



SLEEPLACE 18 Inch Tall Heavy Duty Steel Slat Bed Frame ST-3000 (Full)

Instructions

1 Measure your bed. The standard size for a twin is approximately 39 inches wide and 75 inches long. Use this measure as a guide to make the shelves use.

2 Cut the shelf with a saw, if you have a high shelf. Cut the shelf two-thirds of the way down from the top. Use the two-thirds portion for the header and part of a third part of the foot platform.

3 Sand the cut edges of the shelf to protect your floor from scratches. Protect your floor even more and cut felt pieces in the form of the lower edges of the shelving and heat by sticking them in.

4 Place the head part on top of the Hollywood frame with the shelves facing the foot of the bed. Align the platform with the frame and use a pencil to mark where the screws should go through the platform and into the frame.

5 Drill some 4-inch screws through the headboard into the Hollywood frame to secure it in place. Fix the screws so that the points end under the bed, do not stick out.

6 Put into operation the one-third portion of the shelf at the foot of the bed for the shelves face away from the bed. Align the shelves with the holes in the Hollywood frame and fix with the 4 inch screws.

7 Place the mattress and mattress on the top of the frame and slide the bed into its proper place.

Tips and warnings

•     You can build a bed frame using shelving for a larger size bed as well. You may have to use two sets of shelves from side to side to make it wide enough to go through a full, queen or king-size bed.
•     Using the Hollywood frame helps to give your mattress and the necessary support. If you do not want to use a Hollywood frame, make a frame of 2 feet by 4 feet together, then place the shelves in the frame before placing the mattress and mattress on top.

Zinus 12 Inch SmartBase Mattress Foundation, Platform Bed Frame, Box Spring Replacement, Quiet Noise-Free, Twin

How to build a simple wooden bed frame

The construction of a simple wooden frame for a bed requires knowledge of the dimensions of your mattress and mattress. You can measure the bottom of the spring or use the standard sizes used by the manufacturers. Twin bed frames can be simple box frames. The larger sizes should have the internal support of the councils that cross from one side to the other. Extra-large beds often come with split springs because the center of the bed frame must be compatible with the springs on the sides and in the center.



Zinus 12 Inch SmartBase Mattress Foundation, Platform Bed Frame, Box Spring Replacement, Quiet Noise-Free, Twin

Instructions

1 Measure and cut two of 2 by 6 pieces of wood to the length of the bed structure - the length of the mattress and the bed base - with the circular saw. Measure and cut two additional pieces to the width of the frame, which is the width of the mattress minus 3 inches.

2 Place the two side pieces on the edge on the floor, parallel to each other. Set the front and back pieces - those cut to the width - between the side pieces, also at their edges. Align the corners. Make three 1/8 inch pilot holes, spaced equally, through the side pieces on the top and bottom pieces at each corner.

3 Drive three cover screws through the side pieces on the head and foot pieces at each corner. Measure from one corner to the opposite corner (diagonally). Repeat with the other two corners. The diagonal distances must be the same, within a quarter of an inch. Move the head or foot of the left or right frame slightly to make adjustments until the measurement is the same.

4 Measure and cut two 12-inch by 12-inch pieces of plywood. Cut the two pieces in a diagonal medium to form four triangular pieces, which will be the feet of the frame. Place your feet at each corner with the 12-inch sides aligned with the edges of the 2-by-6 band and the head or foot. Attach the feet to the structure with three drywall screws through the plywood on the 2-by-6 sides, head and feet.

5 Flip the frame again with your feet on the ground. Measure and cut two pieces of 1-by-8 light pine to the width of the frame. Rinse the ends of both pieces with the corners of the frame, the feet and the head. Drill pilot holes two at a time, one inch from the bottom and 4 1/2 inches from the bottom, every 12 inches. Attach to the frame with 1 1/2-inch wood screws.

6 Measure and cut two pieces of 1-by-8 to the length of the weft, which is now 1 1/2 inches longer with the addition of the pieces of the head and feet. Rinse the ends of the two side pieces with finished parts from the head and the finishing feet, to the feet and head. Drill pilot holes two at a time, one inch from the bottom and 4 1/2 inches from the bottom, every 12 inches. Attach to the frame with 1 1/2-inch wood screws.

7 Measure the inner distance between the two side finishing pieces. Cut four pieces of oak wood 1-by-4. Place the oak pieces evenly spaced between the head and the foot of the bed. The frame is ready for spring and mattress.

Tips and warnings

•     Marriage and extra-large beds require additional support of 2 by 6 from the foot to the head in the center of the frame. Cut two rectangular feet, 12 inches by 12 inches. Add them to the structure on the head and feet, establish the same distance through the central support and flush with the head and feet 2-by-6.
•     You can stain or paint the frame of any color you want for a finished look.
•     Always follow safety procedures when using power tools. Wear safety glasses, protection and a hearing dust mask when using electric saws and drills.