Do it yourself - How to install a toilet?

Do it yourself - How to install a toilet?

Changing sanitary devices or placing a new ceramic can transform radically not only the appearance of the bathroom, but also the lifestyle of the one who uses it. Therefore, if your TOILET is already worn, stained or broken change it can be an easy task to improve your environment.

Toilet Bowl Ring Remove Product

Tools and Materials
Tools to use:

•     · Caulking gun (for silicone)
•     · Paddle tip Screwdriver
•     · Banner of measuring
•     · Cross screwdriver
•     · Electric drill
•     · Bucket
•     · Concrete Drill
•     · French key
•     · Pelican Key
•     · Drill bit for ceramics

Materials to be used:

•     · Silicone with fungicide
•     · Non-stick resin tape
•     · WD40
•     · Wc

Print shopping list

Step by step
Before you start

Before you start
Before removing the WC, measure the distance between the back wall and the side screws at the base of the fixture, this will give you the measurement of the drain shaft on the floor.
With this measure choose your new device, selecting one that has the same axis or slightly larger.
Check all parts of your new TOILET.

Parts List:

•     Cup and Pond
•     Anchor screws to Floor
•     Full Tank valve
•     Tank-to-cup coupling seal
•     Pond fixing bolts to cup
•     Discharge handle
•     Flexible Water
•     Wax drain ring with plastic, integral verse
•     Seat
•     Stopcock (optional)

1
Remove existing TOILET.

    Drain the pond.
    Close the Stopcock (also known as the angular key) so that it does not pass
    More water.
    If there is no stopcock for the pond, or else you want to change it, close the key
    General step of the house and open some water faucets in other rooms
    To drain the whole system.

    Remove the TOILET chain so that the water flows into the bowl. Should not enter
    More water to the pond.
    Put a bucket to receive the water and unscrew the existing flexible key
    By the way.

    Remove the anchor bolts from the cup.
    Remove the pond from the Cup. This is not essential but it makes it easier to move.
    If the nut is rusty and very tight, apply WD40 or similar product
    to release it.

Recommendation
The TOILETs are heavy, take care of your back when lifting and moving.

Drain

Always try to use the same existing drain on the floor; Changing the position is complicated and quite demoro, and if the house has only one bathroom, it can become a real problem.
A change of drain implies-normally-more than a couple of working days: to break radieres or slabs, to cut existing pipes, to put a new section of pipe, to empty concrete again to close, etc.
And for all this it is advisable to hire specialists.

2
Install the new Cup

    Present the cup with your pond and mark on the floor the location of the perforations for the new bolts.
    If the location coincides with the above, remove the old anchors and put some new ones. Now, bolt the new.

    If the perforations do not coincide, these holes must be filled with cement.
    Once dry, drill two new holes with a ceramic bit.
    Insert new plastic anchors.

Cup position

To ensure that the outlet hole in the bowl is perfectly centered on the drain pipe, do the following:

1. Once the old Cup is removed, mark the shafts of the drain pipe on the floor.
2. Put the new Cup back down and mark on its base the axles, extend
On the side faces.
3. Place the new cup by matching the marked shafts with the floor strokes.
4. Mark the part contour on the floor and remove it.

3
Fit the wax ring

    Put the cup, without the pond, legs up (inverted) and carefully resting on a cardboard so that it is not scratched.
    Remove the protective cover from the wax ring.
    Fit firmly into the bowl drain.

To level
Sometimes the ceramics on the floor are not well leveled.
If this happens, put plenty of silicone on the edge of the TOILET base. This will help you level the position once it is set.

4
Seat Cup

    Turn the cup carefully and lower it until the wax ring is perfectly aligned with the floor drain.
    Press firmly into position.

    Clean out the silicone when pushing the cup against the floor.

    Screw the fixing bolts with their respective seals.

Installing Pond Parts

The inlet valve is installed with the separate 13 MMS float from the rear pond wall.

The discharge valve is installed facing the discharge tube.

5
Insert the inlet valve

    Screw the float to the metal bar.
    Insert the bar into the upper part of the valve and tighten into position by screwing.
    Insert the valve into the corresponding hole in the pond, making sure it has the seal in place.
    Notice that the float is separated from the walls of the pond.
    With a pelican wrench secure the locking nut. Do not overtighten the account.

6
Insert the discharge valve

    Insert the discharge valve into the central hole of the pond and with the locking nut secure it at the bottom.
    The vertical overflow pipe must be oriented towards the inlet valve.
    The top edge of the overflow pipe must be at least 13 MMS below the level of the handle perforation.

Recommendation
Be careful not to obstruct the placement of the two coupling bolts or the float bar.

7
Place coupling Seal

    Place the coupling seal on the threaded end of the flush valve, taking care to leave the tapered side down and the two aligned bolt holes.

8
Settling the pond

    Install the pond on the bowl and match the coupling holes.

9
Connect the pond

    Place the flat rubber washers to the bolts.
    Insert them into the holes in the pond by placing the metal washers and nuts on the bottom.
    Tighten the nut by hand, then hold it in place with a French spanner and tighten it from the top with a screwdriver.

10
Install the plug

    Remove the protection from the underside of the flapper or stopper.
    Connect the discharge valve and ears to the overflow tube in the location indicated.

11
Install the discharge handle

    Insert the discharge lever through the hole in the handle basin.
    Secure with locking nut, turning counterclockwise.
    The handle must be horizontal.
    Connect the knurled banner of the plug to the discharge lever.
    Adjust the length so that it rests completely on the discharge valve.

12
Insert the filling Hose

    Insert the filling hose into the overflow tube.

13
Connect the Flexible

    Connect the stopcock to the thread of the inlet key with a flexible water supply for WC.
    Tighten with a French key without exaggeration.
    Roll some non-stick resin tape into the thread of the nut or stopcock.

    Open the stopcock.
    The water level in the pond must be lower than the level of the overflow tube.
    Regular with the screw at the top of the inlet valve, this will force the float to go down in the water.

14
Seal Cup

    Seal with silicone around the bottom edge of the bowl and floor.

How to clean the toilet with Coca-Cola or soda?

How to clean the toilet with Coca-Cola or soda?

The bathroom is, without a doubt, the most bacteria-filled place in the home. There we wash all the time and when we have any accident, we run to the bathroom to solve it. But inside the bathroom is a site that is even more polluted, because it gets the worst load: the toilet.

Toilet Bowl Ring Remove Product

Our waste not only pollutes the toilet, but it gets dirty over time, and if we do not give a constant cleaning, can be a source of countless diseases, especially if you have children or dogs in the house that inadvertently, or wanting, put hands, legs , mouths and snouts in the water that Empoza in the toilet.

Although as much as we want and use products that promise wonders, it is impossible to leave it one hundred percent clean of bacteria; However, it is possible to keep it hygienic for safe use, as well as presentable to the eye so that it does not look like a gas station toilet.

The method we present below serves more than anything to whiten the toilet of that horrible circle of tartar in various brown tones that are formed inside by the water stagnant, but also leave your toilet sanitized for safe use On a daily basis.

Use of Coca cola or soft drinks

Cleaning the toilet with Coca Cola is one of the simplest, safest and most economical methods. The acidity of the soda, obtained from the phosphoric and carbonic acids that give it its characteristic bubbles, helps to take off the scale of the toilet, and the caffeine it contains helps to sanitize the toilet.

What are you going to need?

•     Coca Cola (depending on the size of your toilet you may need 1 to 2 cups of Coca Cola or any other dark soda)
•     Toilet cleaning Brush
•     Cleaning Gloves

How to proceed?

1. Pour the coke or soda in the toilet gently, making sure to cover the stains and the Tartar ring completely.
2. Let stand for at least an hour and a half the Coca Cola, without removing or using the toilet.
3. Put on your cleaning gloves.
4. Then moisten the toilet cleaning brush and scrub the stains and tartar ring. Everything will come out immediately.
5. Remember to pass the brush through the inside of the toilet.
6. Then pull the toilet handle and let the water take all the dirt you just cleaned.
7. Rinse the toilet cleaning brush.

He puts vinegar in the toilet tank. But watch when you pull the chain. That's great!

He puts vinegar in the toilet tank. But watch when you pull the chain. That's great!

Keeping the house clean can be a big challenge, and honestly, I'm one of those people who have a hard time keeping the house clean. I mean, it's not that I can't even know how to clean, but something always gets dirty and I don't have the energy to always be cleaning. So if you come to my house without warning, most likely this is something dirty and messy. You will find some clothes on the floor, dust on some furniture, and the bathroom? Ugh... The bathrooms are the worst!

Toilet Bowl Ring Remove Product

But I'm definitely not the only one who hates cleaning the bathroom. Ironically, with all the ugly germs that live there, the bathroom is probably the place you need the most cleanliness. So when I finally care and clean the bathrooms, what is the best and most efficient way to do it?

Thanks to HouseholdHacker, here is a video with 7 cleaning tricks for the bathroom to make it cleaner with the least amount of time and effort possible. And as if that were not enough, he uses a lot of articles that probably already tenhas in your house. These cleaning tricks include:

•     How to clean the mirrors with the newspaper and tea
•     How to remove water stains using lemons acid
•     How to wash unpleasant toothbrushes and soap dispensers in the dishwasher
•     How to use vinegar to clean the toilet
•     How to keep the toilet brush clean using a general cleaning product (this is great!)

To see all the details and more cleaning tricks for the bathroom, take a look at the great video below. And don't forget to share this video with your family and friends!

How to remove the lid of the toilet bowl

How to remove the lid of the toilet bowl

The problems with the toilet and the cistern are quite unpleasant in their essence. One of the most common problems is water leakage to the toilet through the tank. In this case, the question becomes relevant: how to remove the toilet cistern cover without damaging anything? Although the toilet designs of different manufacturers differ from one another, they have a general principle according to which we consider this problem.

Toilet Bowl Ring Remove Product

Most of the time, a button is found in the cisterns of the latest toilet models, which can be solid or composite. This is what prevents the cistern cover from rising easily. If the toilet is older, simply lift the lid. Sometimes it is necessary to remove the upper part of the trigger.

Many believe that the tank with the button itself cannot be disassembled. It is not difficult to open the tank, the main thing is to understand its design.

Tools Required

Before removing the tank, you must prepare the following tools, without which you cannot make repairs:

•     A pair of screwdrivers of different sizes;
•     You may need pliers.

• Instructions for new tank types.
• Nuevos tanques tipo

Then consider the tank analysis scheme in the example of the "Ido" tank manufacturer and similar with the plumbing fixtures:

•     Using a screwdriver, it is necessary to gently rotate the ring around the knob in the opposite direction of rotation clockwise so as not to scratch the top of the tank.
•     When the ring is moved, you can continue to twist it with your hands, without a screwdriver, it will no longer be necessary.
•     Unscrewing the ring, which must resemble the plastic cylinder externally, we recovered it.

•     After removing the ring, you can lift the lid slightly. In this state, turn it 90 ° so that it is on the other side of the tank; This position will remove the clothing clip located on both sides of the button. It's this clip for clothes and it holds the button.
•     The clamp must be unscrewed.
•     After removing the clothes clips, the tank cap will be removed without any problems. The tank is then repaired and its operation is checked without a lid. If all works well, the system can be assembled in reverse order.

    Tip Remove the lid from the tank, put it on something flat, preferably not under your feet and not on the toilet itself-a cover where the lid will not break so that it can be safely installed in the tank after repairs.

Retirar la tapa del depósito con dos botones.

And here's how you need to remove the cover from the tanks, which have double buttons:

•     First, press the middle button, then a small slot is found inside the other half.
•     With a screwdriver, you must cling to this slot and remove a portion of the button, after the disassembly you can get in the second.
•     In the hole you can see the slotted screw, which is part of the fixing of the tank cap; You must unscrew it.
•     After unscrewing the screw, it will be possible to lift the cover slightly and turn it 90 °. By analogy with the above instructions, you must remove the double-sided garment clamp, after which the cover will be removed.
•     By removing the lid in a safe place, you can fix the valve or leak and then collect everything as it was, but in reverse order.

    Tip When servicing the plumbing in the bathroom, be careful to remember the safety rules. In short, all the details of the washing mechanism during the repair work, which I will get, should be stored in a place where they do not fall out and get lost, nor under their feet. Be sure to make sure that access to these parts does not have small children and pets that can swallow or drag something.

Even before the start of the repair, the water supply to the tank must be cut, otherwise it cannot be prevented from filling during the repair of the system. Water can include only the one that repairs the drainage system, or the one that this person requests. In addition, water is usually only included to check the system, and once the person is convinced that everything is working properly.

Options to remove the covers.

Opciones para retirar las cubiertas.

Some models of tanks are made so that the cover can be removed without problems, because in such systems the button is not part of the cover. And what to do in cases where the above instructions are not adequate? Consider several options.

If it is not so easy to open the tank lid, you can try to unscrew the cork screwed into the mechanism responsible for drainage. Along the circumference of the button is a chrome-plated plastic ring, which must be unscrewed counterclockwise. It may happen that a small effort is not enough; Then you should apply a little more force while trying not to break the ring. However, most likely the button after a "strong" repair has to be replaced.

If, after lifting the lid, you can hear how the water drains, it means that in this design a chain is attached to the button, which is attached to the drain valve. You can remove the chain for convenience, but it is important to remember and note where it was attached to the valve. If this is not done, it will take a long and painful time to select the length of the chain for optimal drainage. When the chain is disconnected, it is safe and smooth to repair the tank.


The most important thing in repairing tanks is to remember to follow the advice given in this article and do nothing with brute force. The principle "There is strength-the mind is not necessary" is not for this case, because the force can damage the thin plastic elements of the drainage system.

How to remove the accumulation of minerals in the toilet bowl

How to remove the accumulation of minerals in the toilet bowl

That unsightly ring around your toilet is made up of hard water deposits. If your home has a soft water system, the toilet will be less likely to suffer from this accumulation of minerals. There are countless cleaning chemicals on the market designed to help remove mineral deposits. Instead of using aggressive chemicals, eliminate the accumulation of non-toxic, eco-friendly and low-cost household products.

Toilet Bowl Ring Remove Product

Instructions

1 Close the toilet water. This is typically a valve located at the base of the toilet.

2 pull the chain. When the water is turned off for bathing and washing, the water level must fall below the mineral ring accumulated in the toilet bowl.

3 Sprinkle baking soda generously over the mineral deposits in the toilet bowl.

4 white distilled drizzle vinegar over baking soda, so make a paste. Let stand for about 10 minutes.

5 rub vigorously with a toilet brush.

6 pour more vinegar into the mineral buildup and let stand for about 15 minutes before re-scrubbing.

7 Scrub the area with the bath brush to rinse the vinegar.

8 Scrub The ring with a pumice stone to remove a hard-to-build mineral, if necessary.

9 put the water back to the bathroom and flush to rinse the area.

[Certified Organic Ingredients] Vanissa Aromatherapy Handmade Organic Baby Bar Soap, Made with Organic Coconut Oil, Olive Oil, Aloe & Calendula. Proudly Made In USA. (Aloe & Calendula)

Hypoallergenic Soaps

Hypo-Allergenic soaps are designed to take care of your skin. They can be used for hands, body, hair or face. You can find them in pill, liquid soap, gel or shampoo. The difference between common soaps and hypoallergenic soaps is that the latter have been tested in laboratories to ensure that they are as respectful as possible with our skin or that of our baby.



[Certified Organic Ingredients] Vanissa Aromatherapy Handmade Organic Baby Bar Soap, Made with Organic Coconut Oil, Olive Oil, Aloe & Calendula. Proudly Made In USA. (Aloe & Calendula)

Below is detailed the properties of the hypoallergenic soaps, as well as the conditions that we may suffer from the use of an inadequate soap.
Types of hypoallergenic soaps according to their use:

What is hypoallergenic soap?

Hypoallergenic soap is a type of laboratory-tested SOAP. Cleaning efficiency is the same as a normal soap. These soaps are of neutral PH intended for people with sensitive skin. They are ideal for people with atopic skin or who suffer some type of allergy. But its use is advisable for all types of people who want to take care of their skin as the dermatitis appear from one day to the other based on exposing the skin to substances. Hypoallergenic soap is soft and neutral to the skin. Its formulation and interaction with the skin is checked in laboratories eliminating the components that statistically causes dermatitis or any alteration in the skin, thus producing fewer allergic reactions and problems in the Skin to those who use it. So it is said that they are allergy soaps oranti-allergic. Understanding as anti-allergic any adverse reaction in our skin.

What are hypoallergenic soaps for?

The hypoallergenic soaps serve to care for the skin and help it to suffer no alteration in it. The possible reasons for using hypoallergenic soap may be:

•     Skin with few defenses: for example, the skin of a newborn baby.
•     Skin sensitive to pH changes and dryness: people with atopic skin or irritant contact dermatitis.
•     Skin with allergic contact dermatitis: caused by skin contact with any substance in the soap formulation that causes allergy.
•     To prevent skin problems: Dermatitis usually does not appear in the first exposure of the product with the skin. Our skin may be prone to suffering the ailment, but it may not appear immediately. Skin problems usually appear with prolonged exposure to the substance. Without warning, and from one day to the other, develop the dermatitis and already accompanies us the rest of our days. Therefore, if we avoid exposure with anti-allergy soaps, we will greatly avoid developing the ailment.

What is soap allergy?

The skin is our protective layer against the external agents that attack us. Any alteration of the same causes a dermatitis. Symptoms of dermatitis include:

•     Redness in the skin
•     Inflammation in the skin
•     Pain in that area of the skin

When our skin, by continuous contact with some material, reacts developing an allergy, then we can say that it suffers allergic contact dermatitis. This type of allergy is usually caused by:

•     Adhesives in strips, Strappings, Peluquines, false eyelashes and stickers
•     Antibiotics rubbed on the skin
•     Fabrics and clothing (including temptations and materials)
•     Fragrances in cosmetics, soaps, detergents, softeners, perfumes and creams
•     Nail polish, hair dye and permanent curly solutions
•     Nickel and other metals used in jewellery, lipstick cases and compact makeup powders, zippers, buttons, bras hooks,...
•     Latex or rubber gloves and shoes

Do not confuse symptoms with irritant contact dermatitis that is not considered to be caused by an allergy. This is usually the most common and usually suffer from people with atopic skin. In other words, people with atopic skin are more likely to develop this type of dermatitis. This ailment is caused by contact with irritating substances or frictions. This irritating contact dermatitis is usually caused by:

•     Detergents
•     Soaps
•     Shampoos
•     Softeners
•     Hair dyes

What is a neutral soap?

A neutral soap is one that does not contain dyes, perfumes, Chemicals and its ph is very Similar to the ph of the skin that is 5.5. This type of soaps with neutral pH are highly recommended for people with atopic skin, allergic or even sensitive skin. All hypoallergenic soaps have Neutral PH. Having the same pH that the skin allows us to use it daily without affecting our skin that is sensitive to Changes in ph. We'll avoid the onset of eczema and dermatitis.

Everest Soap Bars 25 Pack 42.5 grams (1.5 oz) Individually Wrapped Travel Soap Bar Amenities for Hotels & Motels,Resorts Guests Toiletries Bulk Discount Price Made of Coconut Oil(cocos nucifera oil)

Soap for the skin, how to choose it?

The skin is the barrier that prevents the passage of germs to the organism, and also contributes to the regulation of the body temperature. In addition, the sebaceous glands produce a greasy matter that waterproofs the skin.



Everest Soap Bars 25 Pack 42.5 grams (1.5 oz) Individually Wrapped Travel Soap Bar Amenities for Hotels & Motels,Resorts Guests Toiletries Bulk Discount Price Made of Coconut Oil(cocos nucifera oil)

On the other hand, the remains of flaking of skin, dust and outer dirt; They become a favorable terrain for the emergence of diseases. It is therefore really important to ensure that the skin is groomed daily. And to achieve the desired cleaning it is necessary to know which soap or cleaner to use.
Types of Soaps

Conventional: They are characterized by being solid, sparkling and made with animal fat, sodium and potassium.

Moisturizers: They contain plant oils, cream or fats extracted from nuts.

Glycerine: with neutral components, they are recommended for oily skins, as glycerin can dry the skin.

With aroma: They contain floral or fruity aromas and depending on the extract they have, they can become relaxing. But they should not be used by people with sensitive skins.

Liquids: They look similar to a cleansing lotion.

Soft: They are suitable for sensitive skins, as they are composed of natural ingredients.

Medicinal: They are often advised by physicians for various skin alterations.

Dermatological: Its components are very soft, because they are made with natural extracts. They help to close the pores and relieve irritated skins; In addition, they avoid the production of pimples.

Choose the right Soap

In the market there is a wide variety of soaps; Different sizes, shapes, aromas and colors. However, these factors do not determine the quality of the soap. This is why you don't have to choose a product because of its appearance. On the contrary, when acquiring a soap, it is essential to know its components or ingredients; These should be consistent with the characteristics of your skin type (there is a soap for each type of skin). Do not forget that some soaps can even be harmful, as they generate effects on the skin against the desired.

Another aspect to consider is that most of the soaps are obtained from the animal fat; This way they have a longer duration and are more economical. But this type of soap can dry the skin and irritate it. Therefore, try to choose a neutral soap; And so you manage to maintain the pH balance without altering it.

General recommendations for the use of soap

•     Do not use body soaps to clean your face, as they dry the skin and alter the pH. You can purchase liquid soaps or cleaning creams that thoroughly cleanse the skin of your face.
•     The use of SOAP generates well-being for the skin and the organism in general. Remember to shower daily and clean your face at least twice a day, in the morning and at night.
•     It is important to know the components of the soap you are going to use, some may not be suitable for your skin type.
•     Be sure to buy a soap of excellent quality and if possible, made with natural components.
•     Do not abuse the use of perfumed colonies and soaps, they make it easier for you to lose your characteristic natural scent.

How to clean the face?

•     Remove the makeup from your skin, using a cotton swab moistened with makeup remover, oil or cleansing milk.
•     Moisten your skin with warm water.
•     Take a quantity of soap or cleaning cream with your hands, and proceed to wash your face doing a slight massage in ascending direction.
•     Rinse all areas with warm water, ensuring there are no remaining soaps.
•     Gently dry your skin with a facial towel.

CBD Infused Skin Soap Bar Collection (Eucalyptus)

The best way to clean your face is with soap and water

We find ourselves facing another very popular myth. Water and soap to clean the face. Understanding "Soap" as the one we use for our body hygiene. This popular concept is also completely untrue. I'll tell you why.



CBD Infused Skin Soap Bar Collection (Eucalyptus)

Tips & Tendenc every week! Subscribe to our newsletter by clicking here

There are five issues that we should keep in mind when choosing how to clean our face .

FACIAL CLEANING

One. The skin of the body is not the same as the face. It's thinner and more delicate, so we can't take care of our whole body with the same product .

Two of them. Body soaps, although cleaned, usually cause dryness and irritation to the face.

Three of them. The ideal is to use a cleaning product suitable for our skintype. Either:

•     Cleaning Gel for oily skins.
•     Cleaning foam for mixed skins.
•     Cleansing milk for dry skins.

    After cleaning the face we must apply a tonic to balance the ph of the skin

Four of them. The soaps usually meet the ¨ outdoors ¨ 24/7 in contact with the microbes and bacteria around us. Unlike packaged products that open only to use the product .

Five. Finally, although clean water is not enough because it does not work on the PH of the skin, IE does not correct those problems of dryness or oilyness.

A properly clean skin is the first step for a healthy face.

Authentic French Soap - Shea Butter Enriched (2 Soap Bar pack) (Creamy Milk, 8.8 oz)

Why should you wash your face with a cleaner

At some point in life, we have all felt frustrated by the condition of our skin. Dry, Descarapelada, sensitive, very greasy, with a tendency to pimples or acne. Does that sound familiar?



Authentic French Soap - Shea Butter Enriched (2 Soap Bar pack) (Creamy Milk, 8.8 oz)

The interesting fact is that the health of your skin is directly linked to the balance between acidity and its alkalinity, which is measured with the pH scale.

All soaps, lotions, cleansers and other skin care products have an effect on the pH level of your skin.

How does the pH work?

The pH level of a substance is measured with a scale from 0 to 14, where 0 is the most acid, 14 is the most alkaline and 7 is neutral, which is the PH of pure water.

The normal surface of an adult skin is covered by a combination of tallow (natural skin oil) and perspiration. This coating is called the acidic mantle, which protects the skin and saves moisture. (2) Normal adult skin is slightly acidic with a pH level in a range of 5.4 – 5.9. 1

There is a very delicate balance when the pH of the skin is very alkaline. The skin becomes very dry and sensitive, which can lead us to have signs of aging on the skin, such as fine lines of expression and wrinkles. 3

What is the pH level of my skin?

Normally you can determine relatively easy which is the pH of your skin, simply observing the behavior of it. For example, if your skin is oily and acne-resistant it can be very acidic. If it tends to be dry, sensitive or descarapelarse, it can be very alkaline

The most accurate way to know this is by consulting a dermatologist.

Then why use a cleaner instead of soap?

The soap has a pH level between 9 and 10, which can make your skin feel very clean, but it is too aggressive. Remove all the natural oils from your skin, making the pH level very alkaline. This may cause new problems – the skin becomes dry, scaly, and prone to inflammation. This may cause the sebaceous glands to have overproduction of fat to compensate for dryness, causing clogged pores and acne outbreaks (3) When the skin is excessively dry and flaky can also lead to producing lines of expression and wrinkles.

Cleaners usually have a much lower pH level than soaps and are kinder to the skin.

Different cleansers have been developed for different types of skin

Oily skin can benefit from an "active" cleaner, such as skin M. D® Daily Care Foaming Cleanser. This particular cleanser contains 2% salicylic acid to unclog the pores and clean the dead cells, leaving the skin feeling clean and refreshed. It also includes menthol that is soothing to help irritated skin.

The Obagi360® Exfoliating Cleanser works chemically and mechanically to help unclog pores that can cause opaque, uneven skin in shades. It cleans the skin deeply to reveal a soft, couple and radiant complexion.

Dry, sensitive skin will benefit from a gentle cleanser. The Obagi Nu-Derm® Gentle Cleanser is specifically formulated to clean delicately while soothing, rinsing and leaving your skin feeling soft and clean.

The skin that begins to show signs of age, can benefit from a cleanser containing vitamin C, such as the Obagi-c® Rx C-Cleansing Gel, which is designed to clarify the skin and prepare it for other products, while removing the Makeup and oils.

Remember that a good cleaner will work with your skin, without stripping it of its natural oils and without leaving it dry.

Conclusion
Avoid using soaps on your skin, such as bar soap, that have a alkalinity level between 9 and 10. It uses facial cleaners, which have a lower pH level and are specifically designed to clean the face.

And in a separate note (but important): eat healthily, a balanced diet to regulate the pH of your body. (4) Avoid processed foods and eat lots of fruits and vegetables that will help keep your skin healthy and radiant!

Luxury Vegan All Natural Soap Bar Handmade – Rejuvenate with Lemongrass Essential Oil, Coconut Oil, Shea Butter, Castor Oil, Avocado Oil & Cocoa Butter -Dry Skin Care Bath Soap by Wild Wash Soap

Natural soap for a good facial cleansing

For years, bar soap has received a bad reputation. Critics claim that it dries out and that it is inferior to traditional liquid soaps. And while it is true that some soaps contain ingredients that can dry out the skin, there is a new generation of natural and organic soaps, both for the face and for the body, which can make you reconsider your liquid cleanser.



Luxury Vegan All Natural Soap Bar Handmade – Rejuvenate with Lemongrass Essential Oil, Coconut Oil, Shea Butter, Castor Oil, Avocado Oil & Cocoa Butter -Dry Skin Care Bath Soap by Wild Wash Soap

Many people have stopped using soaps in pill, but really, what they should consider for a good facial, are the ingredients of the gels, creams, liquid or solid soaps that we apply to clean our skin, (think there are fragrances and irritating chemicals).

And where do you most often find these unwanted ingredients? Usually in many liquid soaps.

Although not all liquid cleaners are bad, but there are many brands that put unsuitable ingredients, and that's where things get a bit dubious. You should look carefully at the INCI, and learn to recognize the ingredients that can harm you. Many liquid soaps, even natural brands, are full of chemicals like surfactants and preservatives that it would be best to avoid.

The bar soap is made with sodium or potassium hydroxide, but when the formulation is made correctly, the hydroxide disappears and only the soap molecules and the glycerin hydrating remain. Great, huh? "Formulating in a bar allows you to add a greater concentration of pure ingredients and good for the skin and leave aside all the" bad "substances that your skin does not need.

Among its other benefits, bar soaps are more environmentally friendly due to their packaging and are much easier to transport. In addition, some of the newer natural bar soaps are specially formulated for the face and body, so investing in one can also simplify your routine.

If you decide to make the change, simply try to have the right formula for your skin type.

As a tip, we recommend not passing the bar directly on your face or body. Instead, you should moisten your hands and face, and then rub the bar of soap with your hands for about 10 seconds before using the foam to gently cleanse your complexion. The same goes for washing your body in the shower.

Do you feel inspired to give bar soap a second chance?

If you dare to try Abeelium we have three types of soap:

Abeelium - Creamy facial soap - Shea Butter and Honey
It is a natural soap, ideal for the daily routine of facial cleansing, you can apply it both on the face and on the body. You will feel the skin clean in depth without feeling dry. You can also use it to remove make-up.

This natural and ecological soap is rich in coconut oil, olive oil, shea butter and honey. Clean the skin gently and is suitable for all skin types, it can be used by both men and women.



Abeelium - Detox Facial Soap - Clay and Honey
It is a natural black soap, ideal for mixed or oily skin, formulated to clean in depth.

It can be applied both on the face and on the body. Its active ingredients are coconut oil, olive oil, black clay, shea butter and honey.

Due to the detox action of clay, it is especially suitable for acne-prone skin, does not dry out the skin, leaves it fresh and hydrated but with a clean sensation.



Black Facial Soap Detox - Exfoliating, Clay and Honey
Deep cleanses and exfoliates gently. The black facial soap Detox can be applied both on the face and on the body, it is recommended not to apply directly on the skin.

Due to the exfoliating powder that it contains, it is necessary to moisten the hands and rub the soap, so that the exfoliating powder remains on the hands and thus be able to apply it gently on the skin of the face or body.

Its main ingredients are coconut oil, olive oil, black clay, shea butter, honey and volcanic stone dust.

For its detox action and facial exfoliating, it is especially indicated for oily skin and with acne. It is recommended to use it twice a week.

We hope you like them !!

Caswell-Massey Triple Milled Almond Luxury Bath Soap - Year of Soap Boxed Set – 5.8 Ounce Each, 12

How to clean your hands of grease

From time to time in the life of every cyclist, it is time to prick their hands with the bicycle. After fixing a puncture, adjusting that brake shoe that rubbed or that change that does not stop jumping between two pine nuts usually our hands usually finish more dirty than the chimney sweep of Mary Poppins.



Caswell-Massey Triple Milled Almond Luxury Bath Soap - Year of Soap Boxed Set – 5.8 Ounce Each, 12

That mixture of grease and charcoal from the road is quite difficult to remove by traditional methods (see the soap bar of a lifetime). However, not everything is lost as there are several effective ways to clean your hands after an intense mechanics session:

The first and most professional is to use a product specifically designed for these tasks, that is, a degreasing paste for hands like those used in mechanical workshops. They can be found in industrial supply stores. My only experience with this type of cleaner is the Loctite Fast Orange and the truth is that it is amazing how well it works.

Another option is to use dish soap (Fairy type) and a little sand and scrub. The soap only does not remove all the grease and it is necessary to use sand to keep the hands very clean. In this case you have to be careful where you rinse your hands since the sand can get to clog the drain pipes.

Finally, the technique that I like the most because it is easy, cheap and effective: powder laundry soap. This soap is a little rough and it is also very concentrated so it removes the fat a thousand times. It is also very cheap and you can even take a little on the bike to wash clothes and gift, clean your hands.