How to clean glazed tiles

How to clean glazed tiles

In the market we can find two kinds of tiles: glazed and without unglazed. The glazes are harder, but they scratch easily. On the other hand, the surface tiles without unglazed absorb the cleaning products. The white cement used in the joints is porous and retains moisture and mildew.

Grout Cleaner Product

For periodic cleaning of glazed tiles, the most common in kitchens and bathrooms, use a non-abrasive spray cleaner. The glass cleaner produces a good finish, but it avoids the intense colors because they can dye the porous joints.

Heavily soiled glazed tile

Heavily soiled tiles require larger caliber weapons: cream cleaner or scouring powders. If it is a countertop or shower wall, apply a thin layer of cleanser containing whitening agent and water and wait 15 minutes to several hours before rinsing. Rinse with plenty of water and dry with a rag.

Clean the tiles in a fast and efficient way

First, start by removing dust from the walls with a soft cloth. Then, fill a bucket with warm water and add a drizzle of neutral cleanser in one of them. If the walls are very dirty you can forget about the cube and opt for a product in degreasing spray.

Action time: Moisten a cloth in the soapy water cube and rub the wall. With a soft cloth moistened with water rinse. You can use a soft toothbrush to remove dirt from the union of the tiles, but do not pass or remove the white cement grout too! Finally, dry the tiles with a clean cloth.

And the tiles without unglazed?

Clean tile without unglazed with a natural sponge just moistened in a water solution and non-soapy detergent or commercial cleaner. Avoid acidic cleansers, such as vinegar, on glazed surfaces. The acid attacks the joints and undos them. Forget the metal scourer as it scratches the tile surface.

Cleaning of marble, ceramic and slate floors

Cleaning of marble, ceramic and slate floors

Proper care of your soil prevents damage, prolongs its useful life and keeps it looking new for years. How is the soil properly cared for?

If you like to walk barefoot or even if you don't, leave your shoes at the door. Why are you taking off your shoes? If you have a rough board that needs to be straightened, use a sandpaper to do so. Guess what's on the sole of your shoes? Sand and dirt wear the surface of your soil causing premature death.

Grout Cleaner Product

A closer look on the soles of those shoes and you will find oil, dirt and even scraps of dog poo. No wonder his soils refuse to be clean. Wear slippers or socks inside the house. The fat in the soles of the feet also soil the surface.

•     Always vacuum or clean the floor surfaces before scrubbing.

Marble Floors

Use only warm water on marble floors. Mild vinegar acid damages marblesurfaces. Once again, drain all excess moisture from a towel or wet mop. Immediately afterwards, with a dry towel. They always dry the marble floors, they are easily stained.

Ceramic tile

Clean tiles or ceramic tiles with lukewarm water only.
Prevention becomes essential with these soil surfaces.
Regularly apply a sealant found in ceramic tile and tile stores for slate, tile, and especially grout.
Clean spills immediately.

How to clean the joints of the floor and skirting boards? 5 infallible tricks

How to clean the joints of the floor and skirting boards? 5 infallible tricks

Cleaning the joints on the floor is one of the tasks that headaches can create. Dirt from the street or dust that accumulates in the houses makes the joints of the floors usually lose their whiteness easily. Thus, for example in the cleaning of ceramic floors, pay close attention to the materials and techniques used to remove dirt from the joints or plinths without damaging the properties of the ceramics.

Grout Cleaner Product

When we regularly clean the soil joints using the best products and techniques we will be able to keep our tiles in perfect condition for longer. Therefore, there will be no need for frequent repairs or replacements that are a big outlay of money.

If you want to know how you can clean the joints of the ground or plinths to obtain a perfect result in a short time, pay close attention to the 5 tricks that we propose below in this article.

1. Whitening soil joints with chemicals

The passage of time and the continued use, especially of the bathrooms and the kitchens, make the joints of the ground become dirty at a high speed.

We often consider how we can return whiteness to the tile joints to make the floors look like new again.

One of the answers to that question is through the use of products destined to it as the Green forest gasket bleach or the Baldosinín.

These products are very easy to use and provide great results in a few minutes.
How to whiten joints step by step?

•     Before using any of the two products above it is important to freguemos the soil well with water and a little bleach.
•     In this way we will be able to remove the dirt more superficial and disinfect to clean the joints of the ground perfectly.
•     It is important that we let the floor dry completely so that there is no moisture or bleach residue.
•     Afterwards, the specific product must be applied to whiten the ground joints with the sponges or brushes that they include.
•     The best way to apply these products is to shake them and give them on the joints forming lines.
•     These bleaches should then be allowed to dry approximately 20 minutes to make them truly effective.
•     These products usually have very strong active components, so it is necessary that the tiles are scrubbed with clean and very hot water.
•     Thus, we will be able to soften the product that has been distributed on the platelets and remove it easily.
•     These products are used to clean the joints of the kitchen tile, bathroom or other rooms, as well as the plinths.

2. Cleaning of floor gaskets with sponge and bicarbonate

One of the most common ways to clean the joints of the floor is through bicarbonate applied with a sponge.

In this case, the first thing you need to do is to wet the surface that we want to clean with abundant water.

How to clean the gaskets with bicarbonate?

•     We must use a basin with hot water in which we add bicarbonate that we will apply on the ground with a sponge.
•     It is very likely that after a few minutes we see how they start to stay whiter.
•     If we want to deepen the cleaning we can use a bristle brush or small teeth and rub vigorously on the joints of the ground.
•     Remove any dirt that appears or the remaining product with a cloth, which will serve to dry any moisture that may cause mildew or attract insects.
•     When using products containing bicarbonate or chemicals it is advisable to always wear gloves to protect your hands.
•     Also avoid direct contact with the eyes. If on occasion we forget this step we can have irritations.

3. Whitening Grout Joints

This option is the most effective, but also the most drastic of all and requires a little more time than the previous two. It is basically to give a layer of grout to all the joints again. With this we will get them to whiten again and acquire their original color.
How to apply grout to soil joints?

The best way to apply a new grout is through the following steps:

•     Gently remove the old grout with a small chisel. When we do this action it is very important that we pay attention and care so as not to damage the floor tiles and that we have to repair or replace any part of it.
•     Clean the debris that appears and the dust: After removing the old grout there will be a lot of debris and dust that we have to clean as soon as possible. Before starting to pour a new grout the surface must be absolutely perfect.
•     Prepare the product following each and every one of the manufacturer's instructions.
•     Apply the product on the joints with a spatula.
•     Use a damp sponge to finish the cleaning process.
•     Use a sealant or grout protector to protect moisture seals that usually appear in bathrooms and kitchens.

4. Clean floor gaskets with brush and etching

Bleaching of the ground joints can also be done with a brush and etching. The first thing to do is to use all the tiles with water preferably hot. Then we have to pour the etching on the joints and wait several minutes to see how a foam forms.

After passing between 5-10 minutes we have to rub each of the joints with a toothbrush energetically, and then rinse them with water until the etching is completely eliminated.

When we do this type of cleaning it is necessary to protect itself with gloves, mask and eye glasses, since the most recommended etching is the hydrochloric acid that can cause us serious damage if we do not protect ourselves well.

However, with the passage of time and when using it repeatedly, the hydrochloric acid deteriorates the grout. Therefore, it is recommended that you use etching to clean the soil joints sporadically.

5. Hires the services of companies specializing in cleaning soil joints

Cleaning the ground joints requires specific knowledge and time to be able to carry it out. Daily duties make our time unlimited the vast majority of times, and therefore the best solution is to hire cleaning companies.

The main advantages of having the help of this type of companies are:

•     Practicality
•     Time Savings
•     Saving money
•     Tranquility

What should we know when hiring a floor cleaning company?

•     It is important that we always choose companies that have several years of experience and good reviews.
•     One of the most useful ways to find reliable companies is by asking our acquaintances.
•     In addition, we can search the Internet for cleaning and maintenance service companies.
•     When you have drawn up a list of two or three service companies ask for free budgets to compare.
•     Choose the one that best suits your needs.
•     Doubt those companies that do not offer you detailed budget with materials and techniques, as well as those that offer very low budgets.
•     In the Dimasplus Cleaning Company We know how to clean floor gaskets to get the best results.

At Dimasplus we are able to provide cleaning and maintenance services in any type of space.

All our workers are formed in order to be able to develop their work in the best possible way in the shortest time.

The main services offered by Dimasplus are:

•     Floor Cleaning
•       Office Cleaning in Madrid
•     Deep Cleaning of premises , household cleaning
•     Clean Crystals
•     Cleaning up Neighborhood Communities.

An in-depth cleaning is always vital to achieve order and balance in our homes.

Because of this, the hiring of cleaning and maintenance services is becoming more common.

Polluting factors generate large amounts of dirt that create discomfort and disorganization in households or businesses.

Training on how to clean grout

Training on how to clean grout

Grout is a fine mortar that you put between tiles for paving and counterwork to keep in place. This glue-like padding is often found in bathrooms and kitchens. Whether on the shower walls or on the kitchen floor, grout may be discolored over time as dirt accumulates in it or mildew grows. Discoloration of grout may be unsightly. Fortunately, you can clean the grout using various methods.

Grout Cleaner Product

Instructions
Cleaning steam

• Place water in the steam cleaning unit.

• Turn the steam on and let the water heat up.

• Use steamer grout attachment. Usually these look like long wands. Press the attachment against the grout line and move down the line, the steam trigger as you go. This will release the stains on the grout.

• Use an old rag to clean excess moisture and dirt that releases steam from grout.

Oxygen Whitener

• Mix together one part oxygen bleaching with two parts warm water. You want to dissolve the oxygen bleach in the water to create the cleaning solution. You can find oxygen-whitening products at your local grocery store.

• Apply your oxygen-whitening solution directly to the mouthpiece. You want enough so that the grout is completely soaked. If the grout absorbs the solution, add more until there is a permanent puddle of the VAC.

• Leave the VAC to soak for 30 minutes at one hour.

• Use an old brush or toothbrush to rub the mixture into the mouthpiece after the time has passed.

• Use a mop to wipe away the oxygen bleach solution. Rinse the area with clean water if necessary and allow your grout to dry clean.

Sodium bicarbonate

• Place 1/2 cup of baking soda, 1/4 cup distilled white vinegar, 1/3 cup ammonia and 7 cups tap water temperature in a large container, sealable. Mix well to combine and dissolve sodium bicarbonate.

Radius of the baking soda mixture into a spray bottle. The remaining cleaner can be stored in the sealable container for future cleaning.

• Spray your grout with the baking soda mixture to completely saturate the area.

• Allow mixture for 15 minutes. Then clean the grout using a damp cloth or sponge.

Tips and warnings

•     If all else fails, you can buy a grout dye from your local home improvement store. Using the stain stain the grout a deeper color. This hides the discoloration of the stained grout.
•     Never mix chemicals, especially ammonia and bleach.
•     When using any cleaning product, make sure the room is well ventilated to prevent respiratory irritation.

The best way to clean grout in ceramic tiles

The best way to clean grout in ceramic tiles

Cleaning the ceramic tile is quite easy, but you can still get the grout dirty. The sandy, porous nature of grout makes cleaning a little more difficult. Your ceramic tile grout is simply dirty or serious stains, it is important to clean it to prevent the entire surface from ceramic tiles well. The best way to clean ceramic tile grout is an environmentally friendly product that will remove stains without damaging the surrounding tiles.

Grout Cleaner Product

Instructions

• Sweep the entire surface with a broom or vacuum cleaner hose to remove dust, debris, and loose soil.

• Fill a clean, empty bucket with an oxygen and warm water bleach solution. The ratio of oxygen-to-water bleach can vary between products depending on the concentration of percarbonate, but in general we will use 4 to 8 ounces of bleach per gallon of water with oxygen.

• DIP a mop or rag into the oxygen Bleach solution cube. Apply solution abundantly to grout. Let the cleaning mix stand for about 30 minutes in the grout of the ceramic tile.

• Scrub Grout lines with an old toothbrush or brush nozzle. If the oxygen bleach mixture has completely soaked in the grout and dries after 30 minutes, apply more of the solution before scrubbing.

• Soak the dirty cleaning solution with a clean mop or rags. Rinse the entire surface of the tiles with a mop or cloth and clean water, then let the air on the surface dry.

How to clean rusty grout

How to clean rusty grout

Rusty Grout is not pretty. In fact, dirty, dirty and mouldy-looking grout detracts from the beauty of a room. The more you go without properly cleaning the grout, the abrasive plus the cleaning needed to do the job. This results in the grout, or cracks of the tiles, each becoming an expensive expense to repair or replace. While cleaning the grout can never be the most enjoyable pastime in your list of tasks, there are some ways to clean properly oxidized grout the first time without too abrasive cleaners.

Grout Cleaner Product

Instructions

• Mix 1/2 Cup of oxygen-bleach with 1 gallon of hot water. The solution combines better if we put the oxygen bleach in the bucket and then let the hot water run over. Agitate the solution to homogenize, using a brush.

• Insert the mixture directly onto the tile and grout. Let stand for at least 30 minutes to break rust. However, do not soak the mixture for more than 30 minutes, as the solution already sits, the more difficult the grout becomes to clean, and the more potential exists for the soaking solution in the grout pores, causing damage.

• Scrub the mixture in the nozzle with the brush. Use gloves to protect your hands. The amount of cleaning time is based on the level of oxidation in the grout. In other words, the dirtier the grout, the longer you scrub. Be prepared to scrub for a long time, regardless of the degree of soiling the grout is. Depending on the oxidation in the mouthpiece, you may need to repeat this step several times.

• Wipe away any excess oxygen chlorine mixture with a towel once you have finished scrubbing. Mop the floor with clean water and allow it to air dry. When dry, there should be no residue from the oxygen bleach solution. If there is, mop the floor again using water and soap detergent dish or on the floor.

The best way to clean grout on floors

The best way to clean grout on floors

The grout fills the spaces between tiles where apparently all the dirt in the world wants to collect. Cleaning the grout is perhaps one of the worst chores in the household. The problem is if you don't, it's very noticeable. If you stay at the top and clean regularly, however it can at least be a quick task.

Grout Cleaner Product

Useful tips

Old toothbrushes are perhaps the most useful tools to clean the grout. They are small and soft and cost nothing. Avoid using wire brushes or anything too coarse; It can damage the grout and create water and bacteria holes.

Gloves when cleaning the grout. Depending on what you are using as a cleaner, open the windows to ventilate too. Many cleaners may not be good for your skin and not all of them smell nice.

If the grout is so dirty it does not work, look in your phone book a sheet and professional cleaning the grout.

Ways to clean grout

Vinegar is an effective and safe cleaner. Mix vinegar and water evenly and spray nozzle with it. After you have soaked five to 10 minutes, rub the area with a toothbrush and rinse thoroughly with water. For stubborn stains, heat undiluted white vinegar, apply with a clean cloth or sponge and leave to soak. Rub the area with a medium soft bristle brush and rinse with water.

Oxygen bleach is great, especially if there is mold. It does not discolor your tiles or grout and does not have harmful fumes. Oxygen bleach is usually sold in the form of powder; Follow the manufacturer's instructions for mixing and always be sure to wear gloves. Apply to grout and allow to soak for 30 to 60 minutes before cleaning with a clean, damp cloth or mop.

Steam is a very simple and effective tool for cleaning the grout if it happens to a steam cleaner. Hold the accessory against the nozzle for 10 to 15 seconds and dirt and debris should easily climb with a toothbrush. Rinse area thoroughly.

How to clean grout with steam vapor system

How to clean grout with steam vapor system

It can clean grout quickly and effectively with a steam steam system. Steam Steam systems pressurize hot water vapor above the natural evaporation temperature. Superheated steam penetrates the surface of the porous grout where dirt tends to hide. Nozzle cleaned with a steam steam system often returns to its original color. Restore the appearance of a floor, wall or board with a powerful jet of water vapor directed directly to the dirty grout.

Grout Cleaner Product

Instructions

• Sweep or vacuum the grout thoroughly. Surface debris can deflect the steam jet and restrict penetration.

• Fill the reserve in the steam steam system with distilled water. Stop adding water when the fill line is reached. Carefully seal the tank.

• Cover your hands with thick rubber gloves. The steam superheated steam system is able to burn the skin in contact.

• Fit the grout brush to the steam steam system. More Brush Accessories slide or rotate over the end of the steam nozzle. Set the steam vapour system to the medium steam outlet, if it has adjustable positions.

• Plug in the steam steam system. Energy in steam Steam unit. Squeeze the trigger every 30 seconds until the steam comes out.

• Press the grout brush into the grout. The brush runs back and forth along the grout line while the trigger is depressed in the steam steam system.

• Release the trigger. Lift the nozzle brush. Clean the nozzle and around tile with a soft cloth.

• Clean all grout with steam vapor and a soft cloth. Return to areas that are still dirty for secondary cleaning. Turn off and empty steam vapor system when finished.

Tips and warnings

•     Spray stained grout with a bleach-based, multi-purpose cleanser. Wait for the cleaner to dry. Spray grout with hot water and clean. Repeat the process until the stain color is clear enough.

How to clean grout with peroxide and water

How to clean grout with peroxide and water

Grout is a sandy material used to seal tiles. Porous texture of the material can trap dirt and stains. When exposed to water, grout provides an ideal environment for mold to grow. Regular cleaning is not always sufficient to remove stains or mildew. Hydrogen peroxide can kill mold and can whiten grout without emitting noxious fumes. Do not scrub hard is necessary, so you can improve the appearance of your grout with little effort.

Grout Cleaner Product

Instructions

• Fill a spray bottle with oxygenated water.

• Spray Grout with enough peroxide to saturate evenly. Allow the liquid to rest for 30 minutes. If the peroxide dries before that time, spray the area again to keep it saturated.

• Scrub Grout with a brush or old toothbrush. Use rubber gloves to protect hands during cleaning.

• Fill a bucket with warm water and immerse a cloth or mop in the water. Drain and clean or mop the nozzle to remove any peroxide. If cleaning shower tiles, fill a glass with water and pour into the sides to rinse the peroxide.

• Allow grout to dry air.

Tips and warnings

•     Grout will appear darker until completely dry.
•     Do not use hydrogen peroxide to clean dark or colored grout. Hydrogen peroxide can fade color.

Stains How to clean ceramic tile grout

Stains How to clean ceramic tile grout

Grout is an important part of ceramic tile installation; It not only works for tiles, but also keeps the moisture and dirt from getting behind the tiles. Grouting ceramic tile can be dirty or stained over time. Mildew, dirt and other substances can stain grout from tile, making the surface tiled all look dirty. You can clean stained grout quickly with the right products and methods.

Grout Cleaner Product

Instructions

• Scrape of any debris pieces stuck in the grout with a blunt knife. Do this carefully to not chop the tile grout.

• Sweep all tile surface completely to remove debris, dirt, and dust. Use a vacuum cleaner with a soft brush or broom to sweep the surface.

• Fill a clean, empty spray bottle with equal parts white vinegar and hot water. Shake the bottle to mix the ingredients.

• Spray vinegar solution into stain grout. Let stand for about ten minutes on stains.

• Scrub Dirty grout with a grout brush or old toothbrush. Apply more than vinegar solution and continue washing until stains have disappeared.

• Rinse the grout with a rag and water.

• Squirt Plain, white shaving cream in grout for an alternative stain extraction method. Leave the shaving cream in the grout for about five minutes, scrub with a grout brush or old toothbrush and then rinse with a rag and water.

Tips and warnings

•     Make a paste of hydrogen peroxide and bicarbonate for stains on the light-colored grout. Spread the dough over the stain and wait ten minutes before scrubbing and rinsing. Peroxide is a whitening agent and can change color of grout.

How to clean black grout on shower walls?

How to clean black grout on shower walls?

It is a cement-like substance that is placed between tiles to fix tiles in place and create an eye appeal. On the walls of the shower, grout can easily pick up dirt and mildew, which is important to clean the shower walls often and properly. While several retail products are available, these are often costly and more expensive than some can afford. Instead, consider making your own cleaning solution the grout.

Grout Cleaner Product

Vinegar

Vinegar works to clean and disinfect grout. In a spray bottle, two cups of water and a cup of distilled white vinegar are combined (available in any supermarket). Spray this solution directly into the mouthpiece, let stand for five minutes, then rinse away. For areas that have accumulated mold, this solution to the spray nozzle and then wipe with a cloth or sponge to remove any buildup.

Sodium bicarbonate

Baking soda also works well to clean black grout on shower walls. Mix a solution of one cup of water and 1/2 cup of baking soda. Spray solution over grout and work with a soft bristle brush. Rinse the nozzle with a clean stream of water to remove any residual dirt or extra baking soda.

Bleach

A simple bleach solution also kill the bacteria and clean grout effectively. In a spray bottle, mix a half-cup bleach solution and two cups of water. The solution directly into the spray nozzle and use a brush to clean up any dirt or debris. Rinse with clean water to remove any debris and allow to air dry.

Ammonia

Ammonia is one more element that will clean the mouthpiece and avoid the growth of mold. In a spray bottle, mix two cups of water and a cup of ammonia and spray directly onto the shower walls. Wipe with a cloth or sponge and rinse with clean water to remove any debris or ammonia.