Easy and economical way to clean grout Helpful Tips

Easy and economical way to clean grout Helpful Tips

Save money Wiping yourself

Technique for cleaning the grout by itself, easy and economical.

The ceramics are so beautiful when installed for the first time, but over time the lines of the grout are visibly stained and darkened. Unfortunately, grout cleaning is a difficult task and most professional grout cleaning companies know it.

Grout Cleaner Product

Professional Grout Cleaning can easily cost hundreds of dollars if you have a large floor space. They finance (literally) the lack of knowledge and the frustrations of the people with the cleaning of the grout.

My friend Jamie has ceramic tiles all over her kitchen, dining area and two bathrooms. When his family bought his new house 7 years ago, the flats were impressive.

Over time, the grout began to get dark and stained, especially in the bathrooms and kitchen. He cleaned the floors regularly using only water with vinegar and a steam mop, which is the best way to keep the tiles clean without accumulation.

Despite their best efforts, the grout still became gloomy. She called and received a free quote from a local floor cleaning company and almost fainted when she was told it would be almost $500.

She took a floor with bleach and a toothbrush. It was exhausting, nauseating and made the whole area stink of bleach for days. It worked, but it certainly wasn't a viable solution for larger rooms.

Because she had professional experience, she asked me if I knew what would help. We decided to take an afternoon and try some experiments. After some tests and mistakes, we came up with something that was pretty impressive.

Keep in mind that it's all about keeping cleaning tasks as green and non-toxic as possible. I worked for many years as a professional housekeeper and I know very well that most commercial cleaning products pose many health risks. Our technique was not completely green, because sometimes it takes a little muscle for hard work, but it was much less toxic than a room full of bleach and other chemicals, yuck!

As we did not want to submit to the potent vapors of the migraine-inducing lye, we decided to create our own recipe that was effective, smoke-free and as toxic as possible.

The following is the recipe for our combination and tips to make the work more fluid, highlighting the mistakes we made and what we should have done differently.

Fortunately, your floor and/or shower cleaning experience will be much more fluid and won't take six hours with two people like ours. The following shows how we clean the grout and returned it to look new. The ingredients are cheap, simple, mostly non-toxic and very effective.

Our effective grout cleaner, mostly natural

    * Disclaimer *: Please note that you SHOULD always perform a spot test before testing any technique and that this method will lighten your grout, so it should only be used in white/light grey grouts in the first place. Do not try this in dark or colored grouts or it will alter the color!

In a bucket we combine a small box of baking soda, about 1 cup of Oxiclean, and enough peroxide and lemon juice (2 parts peroxide for a part of lemon juice) to make a thin paste. Stir well, mixing very well. Wear gloves to protect your hands, as this is very dry for the skin.

Use a grout cleaning brush (not a toothbrush that is not as effective) and apply the mixture to the grout only in a small section of 9 to 12 squares of tile, more or less. Scrub the mixture in the grout, being careful not to scrub all the tiles. It will not damage the chips if you have it there, but it is a great pain to scrub the tile.

Allow the mixture to rest for 15 to 20 minutes and then use a steam wand to clean. Keep your pasta fine, such as Elmer's aqueous glue consistency and do not apply too much for best results.

* Helpful Tip *

Go to the dollar store and invest in a garden platform. It is a square foam pad that you can throw on the floor/floor to kneel. It will save your knees while applying the pasta with your grout brush. You can also use a long-handled grout brush, but I think you get better control and more "muscle" behind applying it with a hand brush.

Cleaning and disposal

Try using a steam wand with a grout or jet attachment to propel the steam through the grout cleaner. The heat of the steam will re-moisten and dissolve The cleaner. Clean as much water as you can immediately. You will need to make a couple of passes with the steam in the areas near the walls to remove all the grout cleaner.

Regardless of the amount you clean, the mixture will LEAVE a calcareous residue behind the grout lines of the tiles when it dries completely. It took Me several tries with just a steam mop to accomplish this and it was a great pain.

Oxiclean and baking soda do wonders to clear and remove stains, unfortunately they do not like to rinse easily with water/steam alone. If you are doing this in a shower, you can simply use a sponge and rinse it off the walls with the showerhead. On the floors, however, it may be a little more complicated.

The best steam cleaner for grout

    For this job I used my Oreck Steam-it Wand which I love. It runs around $140 a brand new retail. It has multiple accessories and can be used as a wand or mop that can clean in green any area of your home, from tiles to sealed hardwood floors, grout, glass and more. The filters are durable and the water tank will be cleaned for 35 minutes in a row. It is a valuable investment for its ease of use and ultimately will be amortized alone.

Oreck Steam-It Steam Mop, Steam100LRH Oreck Steam-It Steam Mop, Steam100LRH buy Now

Get rid of the waste-lessons learned!

What I finally finished doing was taking Windex, spraying the tiles with the dry residue, and then drying it with a lint-free cloth. The little ammonia in the window cleaner cut off the residue and removed it immediately. This only took once and the floors were beautifully dried and without residue. I wish we had done this long before the 4-story rinses we made with steam and a wet mop.

This is why I recommend making the floors a small area at a time and not a whole room at a time as we did. It took us hours to figure out how to get it all off the floor. Ultimately, the window cleaner and wiping it with a dry rag instantly eliminated all traces of the tile residue.

If you move across the floor, making small sections at a time, you can make the grout clean completely and not trace the dry residue around the rest of the floor you just mopped. Ahem. -I said "lessons learned" at the top of this section.

Made in small sections at a time, this is an incredibly easy, effective and economical way to clean your grout and save hundreds of dollars without many headaches. You'll be surprised how fast you can do this with steam. The cleaning solution does all the work for you, without the need for thorough washing.

You should use a steam wand to get the grout completely clean and restored as new (borrow one if you want, but I recommend investing in one as they are excellent cleaning tools for many purposes).

The next day, once the grout has dried completely, if the stains still look dark or residues of white powder remain, moisten only with peroxide and allow to settle for a few minutes. Review Grout with a magic eraser. This cleans any points you have lost with scrubbing and steaming.

Of all the areas of the floor we made, only a small spot in front of the fridge looked still dirty when it dried up completely. The next day we put the peroxide and used the Magic Eraser and it worked beautifully. The steam of the day before had almost done its job and had loosened the dirt, this high-traffic place just needed a little extra help.

Yes, our method is still a process, but it works very well.

I recommend applying a grout sealant after cleaning the grout to help seal dirt and lengthen the time between grout cleanings. Check the manufacturers ' website on your floor or consult someone at a home improvement store for sealing recommendations.

What do you think about Grout cleaning?

Have you ever cleaned the grout?

•     Yes and it was horrible never try again
•     Yes, it was horrible and I'll have to do it again anyway because it's too expensive to do it for me.
•     No, no, but I'll definitely consider trying this technique
•     No I didn't but I'll call a professional anyway because it seems too hard work
•     Other-Share your thoughts in the comments below!

How to clean tile and tile joints

How to clean tile and tile joints

The passage of time appears ungodly with the tiled joints of the houses. They lose their original target, due to the accumulation of dirt, dust, moisture, lime and all kinds of particles. The kitchen and the bathroom are the rooms of the home most affected by this progressive blackening, for which there are some effective and revolutionary solutions.

Grout Cleaner Product

Strong water

The strong water, hydrochloric acid or hydrochloric acid is an aqueous solution of hydrogen chloride, extremely corrosive and acidic. Apart from being used for cleaning, it is also used to galvanize metals or tanning leather.

With a simple toothbrush and hydrochloric acid, extraordinary results can be achieved when scrubbing tile joints. First of all, they should be wet with abundant water. Afterwards, it is necessary to apply the strong water to each and every one of the slits. We let the product do its work for approximately five minutes. Afterwards, the toothbrushcomes into play, to rub vigorously together. Finally, we rinsed and ready!.

To handle strong water, gloves, masks and goggles must be used.

Bicarbonate

Sodium bicarbonate is a crystalline compound white and soluble in water, which can be found as mineral in nature or artificially created. Their properties are known in the food, but also tends to be the same as bleach and homemade cleaner.

After heating water in a container, add the bicarbonate and then proceed to rub, aided by a scouring pad, the joints with the resulting mixture. This remedy can be supplemented with vinegar, for non-whitening joints.

Clean joints

In the market there are countless solutions to clean the tiles and tile joints. The effectiveness of the same varies depending on the product they use and the functions they develop. These are descaling the accumulated dirt and others, on the other hand, are limited to whitening the joints. The latter seek very esthetic results, although within a few months the operation must be performed again, because the dye deteriorates and disappears with sweeps and scrubbing.

It is necessary to clean the surface to be whitened beforehand and thoroughly. After applying the liquid, let stand for a few minutes. To finish and once dry, remove the surplus of cleaner with a scouring pad or mop.

Grout

The most complex, but most effective and best-results alternative is to re-grout the joints. The following steps must be followed to carry out this operation:

•     With an awl we scratch the original grout to remove it and make room.
•     We clean and remove the traces of dirt and dust.
•     We apply the product by the joints, aided by a trowel or spatula. We must press hard, not to leave empty spaces. (We must read the manufacturer's instructions in order to obtain an optimum mix).
•     After a few minutes, remove the excess grout and clean with a sponge or scouring pad.

If we consider it timely, we can use a sealant, which will protect against moisture and help fix the grout.

Having blackened kitchen or bathroom joints is unsightly and says a lot about the hygiene of homeowners or tenants in a house. Whitening is a very simple job and, more or less durable, depending on the technique to be used. In any case, only a few minutes and some patience are needed to enjoy shiny and new tiles and tiles.

We all feel like going for a shower and that the bathroom is in excellent condition. However, tile joints are likely to be found with mold and dirt due to soap, vapors, and other debris. If you want to know how to clean the tiles ' joints, you are in the right place, in this article we explain how to do it.

Steps to clean tile joints

•     Prepare a mixture with a bath and water grease remover (for each remover measure, use three of water). Apply the preparation on the joints and the tile with the help of a cloth.
•     Then clean with a damp cloth and if you need a final touch, use a homemade cleaner made with ½ spoonful of vinegar, ¼ of tablespoon of baking soda and ½ of ammonia or bleach. Place these ingredients in a trigger bottle and spread the liquid over the tiles. Leave to act for a few minutes and rinse thoroughly.
•     Keep in mind that you should always wear gloves to protect your hands and chinstrap if possible to not breathe on the product, since the ammonia is very strong.

Tips for keeping tile clean

•     For your tiles and joints to stay clean, you need to clean them at least once a week, along with the cleaning of the bathroom, since the more you have to clean them, the more dirt they accumulate and the more work you will have to clean them.
•     The steam in the bath is ideal for dust and mildew from the tiles ' joints to soften and can be cleaned afterwards. If you think it's accurate, use an old toothbrush to clean the edges of the tile or some soft sponge (never rough because it could scratch them).
•     When you buy a product to clean the joints and tiles, you will need to read the specifications well so as to avoid applying a product that stains or damages them instead of leaving them shiny. In case of doubt, consult the manufacturers by calling the numbers indicated on the packaging.
•     Avoid having the bathroom closed completely when you clean it, open it and let the sunlight enter it so that the humidity leaves, do not create fungi and to keep it always ventilated.

We hope that our tips for cleaning joints and tiles have been helpful and that you can apply them as soon as possible to have a cleaner bath. Stay in Total home and learn how to clean the kitchen tiles.

Tricks to Clean the Tile and Tile Joints

Tricks to Clean the Tile and Tile Joints

The tiles and tile joints are of those details that we usually overlook when we clean. Normally we consider that they are clean when we pass a mop or a cloth by the surface of the tile; But being made of porous material, grout tends to accumulate moisture and dirt.

Grout Cleaner Product

Surely you've ever appreciated that the tile joints in your bathroom start to turn black; This is because mold grows easily. Mold can be dangerous to your health if we expose you to your spores for prolonged periods of time; It is also unsightly and gives an image of carelessness and lack of hygiene.

How to clean tile joints in the bathroom?

To keep your color white and our bathroom always look like a clean and hygienic space you can follow the following tips. Keep in mind that in the bathroom tiles normally the problem will be moisture, so the appearance of mold is normal; Here are some methods to remove the mold from your bathroom tiles.

Sodium bicarbonate

Making a paste with bicarbonate and water is a very effective way to clean and whiten the tiles ' joints. You just have to make a thick paste with the bicarbonate and hot water and rub it through the joints with a brush. Let the mixture act for a few minutes before removing it with a cloth and hot water. The best of bicarbonate is its whitening effect, leaving the joints perfectly white and mildew-free. You can also mix it with a little white vinegar to get a foam that cleans in depth both the joints and the tiles themselves.

Oxygenated Water

Thanks to its great disinfectant power; Oxygenated water is ideal for removing mold from bath gaskets. You just have to rub oxygenated water insistently with a brush and go eliminating stains and mildew.

Commercial Products

Special products exist in the market to clean the joints of the tiles; They are usually made of lye and give very good results. They come in pencil-shaped containers and are very easy to use. Even if your tile joints are worn or cracked you can find grout to easily fill the joints and make them look new.

How to clean the tile joints in the kitchen?

Since in the kitchen the biggest problem with the joints of the tiles and tiles is that it accumulates fat in them; It is best to treat them with special products to remove this fat and the dirt that remains attached to it. To remove grease and dirt from the kitchen tile joints You can use the following products:

Ammonia

Ammonia is a strong degreaser; It is advisable to dilute it in hot water and apply it with a spray by all the joints. After this we can rub the joints with a brush to remove the traces of grease and dirt. It is also a good time to apply the product throughout the tiled surface and the floor to leave the tiles perfectly clean and shiny. Do not forget to wear a mask when using this chemical.

Lemon juice

The lemon juice diluted in a little water is also an ideal solution to remove the fat from the joints of the kitchen tiles. We will apply it in the same way as the ammonia and rub until we appreciate the clean joints. The best thing about this natural method to clean the joints is that it will leave a pleasant aroma in our kitchen.

Dishwasher Soap

The dishwasher soap acts as a degreaser and makes a foam that causes the grease to peel off the surfaces. A good pass to the joints with a scouring pad and soap dish will leave the joints and tiles well clean.

By following these tips you will always be perfectly clean the joints of the bathrooms and kitchen tiles. It is true that it is meticulous work that takes time; But you won't have to do it more than once a year normally. To prevent the appearance of mold on the joints of the bath we recommend that you clean with bleach or products that prevent this fungus from reproducing easily. For your part in a kitchen you can clean with a commercial fat-removing or lemon juice; So you prevent the accumulation of fat in the joints and minimize having to clean them more often.

Tips for Cleaning Tile Floors

Tips for Cleaning Tile Floors

The floors are available in a myriad of options, but the tile remains an attractive option among the owners. Unlike hardwood floors, tile floors are durable, waterproof, easy to install and available in a variety of styles. Most importantly, they don't require as much maintenance as the carpets. However, if you want your floor to look like new for years, you must learn to clean it properly. Here are the best options when it comes to cleaning your tile floors, whether it's ceramic, vinyl or stone.

Grout Cleaner Product

Clean your floors regularly

Do not wait until your floors become dirty, as you may want to avoid the use of strong chemicals that will degrade your tiles in the long term. Besides, who wants to spend hours kneeling on the floor just to clean up the tough spots? To avoid these problems, you should give your floors some maintenance on a regular basis. Cleaning floors routinely or even everyday may seem tiring but, it's not as hard as you think. Just follow these simple steps.

1. Bar your tile floors every day with a soft broom or vacuum cleaner to remove loose dust and dirt. Remember, you should never use a straw broom because it scratches the tile.

2. Believe it or not, clean the floor with warm water once a week will keep your tiles clean and shiny.

3. Dry the floor immediately when cleaning with a wet mop to prevent new dirt from being small in humid areas and becoming hard to remove fats.

4. Clean up spills, including water, immediately using absorbent cloths. However, for dirtier spills such as pet accidents or raw meat, you have to clean with a cleaner or disinfectant. Since strong chemicals can ruin your tiles, try spraying only the area where you have spills.

5. Place a doormat on both the outside and inside of your home to remove the tracking mud or water on your tile floors. This step is especially important during the rainy and snowy seasons.

Apply deep cleaning solutions from time to time

Do you see your dirty tile floors no matter how often you clean it? Try a stronger cleaning solution. These deep cleaning solutions will eliminate greasy residues and stains without damaging your tiles.

1. Clean the floor with a mixture of ½ cup white vinegar and a gallon of warm water. The acidity in vinegar can function as a natural degreaser, especially useful for the kitchens. You can also use ½ cup of alcohol as a substitute for vinegar.

2. Clean stains with a mixture of equal parts of scorching powder and warm water. Spread the mixture on a stain with a clean cloth and let stand for 5-10 minutes. Then rub the area with a soft brush and rinse thoroughly with warm water and a cloth. Repeat the process until the stain is removed.

3. Mix fresh water with dish detergent to remove stubborn grease stains. Make sure you get all the soap out as you can create a layer on the floor that makes the situation worse.

Be aware that acids such as vinegar and other cleaning products erode natural stone tiles. Therefore, only use special neutral pH cleaners to safely clean stone tile floors. Mild dishwashing detergent, oxygenated water, cornstarch and baking soda are good natural cleaning options.

Do not forget to clean the grout

Never overlook the importance of grout, as shiny grout (e) will make your tile floors look bigger and newer. Before using commercial cleaners, try cleaning your grout with a simple mixture of baking soda and water:

1. Saturate the grout with the pasta.

2. Let the dough stand for a while or even at night, depending on how dirty it is.

3. Rub the grout with an old toothbrush.

4. Rinse pasta with warm water.

If your grout does not look as bright as you would like, you may use a non-toxic cleanser such as oxygenated bleach. Add water to the bleach powder based on the product instructions and rub the solution over the grout with the edge of a sponge. Repeat if necessary. Finally, rinse the floor with lukewarm water to remove the residue.

Whether you choose to use baking soda or oxygenated bleach, you must apply a grout protector after you finish cleaning, avoiding dirt in the future.

Like other areas of the house, the best maintenance is always the precaution. If you follow these steps and clean your tile floors regularly, you will look the same again in the coming years.

How to clean the joints and tiles to make them impeccable

How to clean the joints and tiles to make them impeccable

There are all kinds of natural products and professional systems thanks to which you can easily get the tiles always clean and easily whiten the joints.

Grout Cleaner Product

The bathroom is one of the rooms where the tiles should always be kept clean for reasons of hygiene. Photo by Serveis I products Catalunya.
Always maintain impeccable bathrooms and kitchen tiles require some effort, especially when not being cleaned frequently. However, the most headaches of the head causes is to prevent the joints blackened and, above all, to get whitening when the dirt has been installed in them. Fortunately, you can always go to simple homemade tricks that facilitate this task:

•     To effectively clean All types of tiles and prevent them from deteriorating over time or using abrasive products, the best system is to degrease them with a soft cloth soaked in white vinegar. If you want to get more disinfection you can mix it with liquid soap and a few drops of lemon.
•     If the gaskets are blackened but have not lost the grout, it will suffice to pass a cloth with water and bleach, ammonia or hydrochloric acid – strong water-slightly diluted.
•     You can also use detergents specially designed for the toughest dirt they sell in specialty stores and department stores. In this case, the best way to apply it is to use gloves – they are usually somewhat aggressive soaps-and a thin brush of hard bristles. Once it is clean, it must be rinsed with abundant water so that there are no remains.
•     After removing dirt, you can also apply some commercial product that is recommended to whiten the gasket – they function as a kind of paint that even, in some cases, protects them and keeps them clean for longer.
•     Water vapour Cleaning is another system that can be used for both tiles and gaskets. Special machines are usually used – generally managed by cleaning professionals-with direct applicators.
•     If the seal gap is noticed because the grout has been lost there are two options: use a gasket repair OR, directly perform the procedure followed to prime the gaskets.
•     This consists in acquiring white cement in a specialized store or large surface, dissolving it in water following the instructions of the package – must be a semi-liquid texture solution-and spread it through all the joints with the help of a brush. After approximately 15 to 20 minutes after the solution has dried, residues of excess cement may be cleaned with a spatula or a soft-fiber scouring pad that does not scratch the tiles.

4 ways to clean tile joints 100% effectively tested

4 ways to clean tile joints 100% effectively tested.

Today we bring some helpful home cleaning tips . Well, it's actually four ways or ways to clean tile jointson the floor. Each form is checked and works effectively. So no more, let's go see them. But first, we would like to explain why the tile joints on the floor are stained.

Grout Cleaner Product

Why and what are tile joints stained?

The tile joints are filled with a paste (usually glued together). This, being a kind of mortar, has pores, and over time and with the wear and tear of the floor and walls, each time it is having more pores. When the joints get black, great guilt have fungi and bacteria that grow in these pores, plus you have to add the obvious wear of the passage of time, wear by cleaning (when we pass the mop, etc.), dust and other substances that make Gaskets get dirty. But for the most part, all the dirt we see, are fungi and bacteria that grow in the pores of the mortar that fills the joints. That said, let's see how to clean the tile joints effectively.

Clean tile joints with etching and a toothbrush.

First we wet well with abundant water all the tile. Then we pour etching on the joints and see how it makes a kind of foam, that's because it's acting. We let it act for 5 minutes and then with a toothbrush we rub vigorously together. Once clean, rinse with abundant water several times to completely remove etching.

To clean the joints of the tiles in this way, it is necessary to protect with gloves, mask and eye glasses, since the most recommended etching Is the hydrochloric acid and it is a very strong acid that can cause us damage if we do not We protect well.

Important Note: Over time, the hydrochloric acid will eat the mortar, leaving the tile joints without pasta. It is an effective remedy but for occasional use.

Clean tile joints with a sponge and bicarbonate.

We wet the surface to clean with abundant water. In a basin with hot water we add bicarbonate and with a flower-shaped sponge we clean the joints of the tiles. We will immediately see how white is going. If there is any area that is not left white enough we can use a toothbrush and vinegar and rub vigorously. Once clean, all the joints rinse with plenty of water and ready, we will have the tile joints completely clean and white.

Clean tile joints with a specific cleaner.

The previous tips were based on using homemade products, but if you trust them or want to go straight to the point, there is a cleaner quite effective in the market. It is of the green Forest brand, they sell it in Mercadona and its price is around €2. Or also any of these that we can buy at Amazon.

To apply this product, first clean the tile or floor thoroughly. Once the tiling is clean and dry, we can apply the product.

This gasket cleaner comes with a sponge on top, from that sponge comes out the bleach. To use it, we pass the sponge through the joints by gently squeezing the pot to leave the bleach.

We pass the cleaner through all the joints, let dry and then, with a clean cloth and water, remove the bleach that has been left on the edges of tiles. If we have applied the cleaner to the floor, we'll clean it later with a mop.

It doesn't really clean the joints, let's say it bleaches them, like it's some kind of paint. But it leaves them very white.

Clean tile joints with grout.

This option is certainly the most effective, but also the most drastic. It's about giving them a coat of mortar together for all the joints. This will re-whiten or re-acquire its original color and renew completely. To know how to apply this form of cleaning click here .

What do you think of these ways of cleaning the black joints? How do you clean them? I read you in the comments.
Do you want more decorating tips and become your own decorator? Then subscribe to the weekly newsletter and receive all the news in your mail and some resources to learn to decorate.

How to clean ceramic joints for very little money

How to clean ceramic joints for very little money

The ceramic floors of kitchens, bathrooms and tiles deteriorate considerably with the passage of time. Above all, the tiles ' joints darken and give a pretty bad and dirty picture of the stay still being clean.

The specific products to treat these ceramic joints are exorbitantly priced, dondan the 4-5 euros 100 ml boats, we have several very simple home solutions to carry out their cleaning or repair.

Grout Cleaner Product

If these joints are only dirty and blackened, simply pass the mop or cloth through the joints using strong water (or dilute hydrochloric acid that is the same) without any detergent. The result is unbeatable.

However, if the grout has been lost and the hole in the gasket is noticed, instead of using any gasket repair or the like, it is better that we do the same procedure that is done to prime those joints.

We buy four or five kilos of white cement in any building materials store or large area that has this product.

Dissolve in about three litres of water the white cement stirring at the same time until a paste solution remains, but liquid enough to obtain it. The amount of water is indicative.

Let it rest a little until it has a semi-liquid texture. Before spreading the solution on the floor, we thoroughly scrub the floor or the wall.

We extend the solution with a brush for all the joints. If we want to give it color, just add dye for clothes, the same color as the tiles or tiles.

We wait about fifteen – twenty minutes until the solution has dried. A light layer of white cement is formed by all the areas we have impregnated.

To remove the cement residue, use a large-fiber scouring pad or spatula. It comes out very easily and the results are the same as the first day. After these treatments, your bathroom or kitchen will be as new for very little money.

HOW TO CLEAN AND SEAL TILE GROUT

HOW TO CLEAN AND SEAL TILE GROUT

Tools

•     Grout Cleaner
•     Grout Sealant

Materials

•     Grout Cleaning Brush
•     Sealant Brush or applicator
•     Chemical-resistant Gloves
•     Splash-resistant goggles

What you should know before buying products to clean the grout

•     Make sure the grout has no cracks or loose fragments. For tips on how to repair grouts and tiles, look for the link to the tile replacement article.
•     Some cleaners and sealants may be powerful enough to require special precautions. If you don't have protective equipment, invest in buying splash-proof goggles, chemical-resistant waterproof gloves and a respiratory filter (not enough with a paper mask).
•     This job does not require special skills, but it does require patience, so upload new songs to your MP3 player, buy a pair of knee pads to work on the tile floor and spend the time needed for this work.
•     If your grout is new and has had several days to harden, ignore the cleaning step — or clean only where necessary — and go straight to the section on sealing the grout.
•     Allows enough ventilation for odors to come out of the cleaner and sealant.
•     Some commercial cleaners and bleach mixes can damage fabrics, so don't use your best pants for this project.

Grout Cleaner Product

Cleans Dirty grout

Step 1

Clean the entire floor normally and collect any loose dirt and dust. If the grout has an old, worn coat of grout sealant that still allows water to accumulate, use a floor finish stripper to remove the sealant from the surface. Rinse the floor with clean water and let it dry.

Step 2

Apply a commercial-grade grout cleaner according to the manufacturer's instructions and start scrubbing with a nylon bristled brush or old toothbrush. Work in small areas and rinse the cleaner thoroughly from the floor before proceeding to another section.

    It's good to know: You need to remove the mold before you work on the stains that left the mold. Wear your gloves and eye protection and apply a mixture of ¾ cup of bleach to a gallon of water on the mold patches. Let the mixture work for half an hour before rinsing with clean water.

Step 3

To review the result, compare the sections you have cleaned with grout in low-traffic or protected areas. Stains often come from different sources, so not all stains react the same to a cleaner. If you have tried a method that did not work well, try another, like rubbing with concentrated white vinegar. Let the vinegar solution penetrate into the grout for about 15 minutes and then rinse with plenty of cold water to neutralize the vinegar acid.

    It's good to know: Grout Cleaning can be a frustrating experience when it is not completely clean after the first try, but you must resist the temptation to use super-powerful cleaners. Muriatic acid, for example, can remove stains but will also damage grout.

Step 4

When you are satisfied with the cleaning result, flush the floor once more with clean water buckets to remove or neutralize any cleaner residue.

We all like to finish soon, but if you hurry to finish the cleaning phase during this project and begin to seal the grout ahead of time, you can turn a problem that has solution in a permanent problem because, in addition to sealing the grout , you'll also seal the stains.

Seal grout

Step 1

The trick to applying sealant is to cover only the grout, so use the broader brush or applicator that covers the grout without the sealant falling on the adjacent tiles. When the tiles are completely dry after cleaning, test the sealant on a few lines of grout in a partially hidden area until you feel comfortable applying it.

Step 2

Follow the manufacturer's instructions and plan your work to avoid walking on the grout sealer before it is dry. Do not skimp, apply all the sealant that the grout can absorb, but do not allow it to accumulate on the surface. Once the first application dries, apply a second coat if necessary.

    It is good to know: Now, if you were never able to color without leaving the lines and you have left sealer on the tiles. Do not worry. If the sealant is still wet, clean it immediately with a clean, soft cloth. If it has already dried, clean only the stained area with a damp cloth and remove the residue with a nonabrasive nylon cleaning pad or sponge.

Step 3

Follow the manufacturer's instructions and prevent people from walking on the work area for several hours while the sealant heals. After the last application dries, test the grout with a few drops of water on it in different places. The ideal is to see that a small puddle forms on the surface.

    It's good to know: The sealant helps prevent dirt and spills from entering the grout, but it is not a miraculous product either. You still need to clean the floor regularly and clean the spills immediately before they seep deep into the grout.

How to clean grout with natural ingredients

How to clean grout with natural ingredients

There are a variety of grout cleaning options. From using bleach to scrubbing simply with warm water and much in between, the opinions on how best to clean the tile grout are varied, to say the least. This tutorial will show you how to clean grout using only basic and natural ingredients: baking soda and diluted white vinegar. For me, this method was easy and provided a slightly cleaner result after an application, although regular or frequent use of vinegar in the grout is argued as a long-term abrasive.

Grout Cleaner Product

Materials needed:

•     Sodium bicarbonate
•     White vinegar + water in a spray bottle
•     Small disposable Packaging
•     Toothbrush Cleaning
•     Clean rags
•     Rubber Gloves (optional)

Start by pouring some baking soda into your disposable container. You're going to create a sodium bicarbonate paste with water.

Pour some water into the baking soda until you have added enough to create a paste consistency. I found that a ratio of sodium bicarbonate to water 3:1 is more or less correct, but do not hesitate to play with this. A little water long ago.

• Use the end of the toothbrush handle to remove the pasta.
• When you have a moist but not liquid consistency, you're ready to start.
• Apply the glue to your grout with the toothbrush bristles.
• Let the pasta rest there for a minute while you prepare your vinegar + water solution.
• Mix vinegar and water in a proportion of 1:1 in your spray bottle.

More INSPIRATION

•     DIY Natural Grout/Tile Cleaner
•     Natural ways to clean the bathroom and get green
•     How to clean a bathtub naturally

Spray vinegar + water directly into your glued sodium bicarbonate grout. Be generous with vinegar solution; You will want to clarify in your baking soda paste to react on the surface of the grout. Espumeará a little, which is fun to watch. (And/or will make you realize you need to get more).

Let the vinegar solution settle in the baking soda for a few minutes while frothing. This is actually the power of cleaning and lifting this method of natural ingredients for grout cleaning.

Rinse your toothbrush, and use it to rub the vinegar solution and paste into your grout. Celebrate when you see that the pasta becomes a little gloomy; This is just the cleaner doing his job!

Wet and then drain a rag with wet water, then start cleaning The cleaner when you have finished scrubbing.

You probably need to rinse and clean several times to remove all the glue and vinegar from your grout. (Bonus: This method quickly becomes tile cleaning and grouting, not just grout cleaning, when performing this step).

Let the grout dry to see how well it was cleaned.

As you can see from my results, the grout is cleaner, but not so dramatically. (Actually, it seems more apparent in real life than in these photos).

Some stains were lightened, but still apparent. I like the idea of using natural ingredients that I have handy for cleaning, and this was actually a fun way to clean the grout, especially with all the foam and bubbles and everything else. What is your favorite tip on how to clean the grout?

The best methods to clean tile grout 2019

The best methods to clean tile grout 2019


Whether it's tiles or tiles and it's dirty with grease, soap scum, mold or just dirt, cleaning the grout requires two things: a grout brush and a suitable cleaner. A grout brush is a small brush with hard bristles, available in hand sizes and long handle. You can replace a toothbrush in a pinch, but your bristles are too soft to do much good. As for the cleaner, many formulas work, so you can try different options to find the best interpreter for your mosaic.

Grout Cleaner Product

Chlorine bleach

A traditional way to clean grout lines is to use household chlorine bleach. For a full force application, simply dip the brush in a small container with bleach, rub the grout thoroughly, then rinse with water. Chlorine bleach is somewhat strong, and grout brushes tend to splash, so be sure to wear safety glasses and old clothes. Also open the windows so that the area is well ventilated. Bleach is toxic, releases noxious fumes and can change the shade of colored grout lines over time. Given these drawbacks, chlorine bleach is better as a last resort solution for localized stains, rather than a daily cleaning product.

Bleach with oxygen

Unlike chlorine bleach, oxygen bleach is non-toxic and safe for the environment, and does not have a strong chemical odor. It also does not stain the colored grout lines. Hydrogen peroxide is a form of oxygen bleach; however, it is usually sold in diluted solutions, making it a relatively ineffective cleaner.

Oxygen bleach is sold as a powder that can be mixed with water to create a paste that applies directly to the grout. Let stand for 5 to 10 minutes, then rub with a grout brush. Rinse with water and wipe the floor with a cloth.

Alkaline cleaners

The Tile Council of America (TCA) recommends alkaline cleaners to remove stains from the grout.

Alkaline cleaners include Spic n 'Span, Super Washing Soda and Mr. Clean, among many others. These cleaners are particularly good for cleaning dirty and greasy grout joints in the kitchen. Rinse the solution thoroughly and remove it with a rag, mop or shopping vacuum to remove the white cleaner from the grout.

Why not vinegar or baking soda?

Alkaline cleaners are recommended because the grout contains cement and can be dissolved with acidic cleaners, including vinegar. Do not use vinegar or commercial cleaners based on acid in grout, period. Vinegar and other acids are also a no-no for stone tile because the acid can burn the stone. Another widely praised household cleaner, baking soda, is alkaline (not acidic), but has very little effect as a cleaner on dirty grout. That said, there is no harm in using baking soda if it seems to work for you.

Sealing grout lines

Cleaning grout lines can be a difficult and physical process. Once the grout appears clean and free of stains, sealing the grout will create a protective surface on it that helps prevent staining and makes the grout much easier to keep clean. It is important to follow the manufacturer's instructions carefully when applying the grout sealer. The tile should be clean and completely dry, and you should let the sealer cure completely before using the tiled area.

Maintaining Mosaics

Maintaining Mosaics

Keeping the Tiles

Once you have put your time, energy and financial resources into installing or designing your home, restaurant or establishment with quality concrete tiles, there is nothing worse than not making them look. Always put your best effort to keep your cement tiles looking at the best with the following maintenance tips. Take into consideration the spaces between tiles (or grout) when installing cement tiles is tempting not to leave spaces between them, as many people think that tiles without spaces between themselves look better. Although that is a personal preference and design, the truth is that there must be at least a small space (1/16 ") between the tiles to be able to apply the grout. Fortunately, 1/16 "is a very small space, which makes the hole imperceptible to the eye. Our recommendation is to use nozzle or grout without sand to reduce tile spacing.

Grout Cleaner Product

How to polish and seal your cement tiles?

After installing your cement tiles, make sure to clean them carefully and thoroughly for the best visual results. The following points are key to showcase the new floor of your space: maintain your good physical appearance, receive a number of compliments and help you last for decades and more.

Follow the steps below to polish your cement tiles:

•     Use a fine sandpaper (600 grit) disc to lightly sand the tile surface
•     Protect with a good quality penetrating sealer
•     Buff with a white pad

Sealing your cement tile floor is also an important part of the installation process, as the cement tiles are porous and can absorb unwanted dirt and stains. It has two main options for sealing its cement tiles: penetrating or topical sealants.

Penetrating cement tile sealants are absorbed directly into the cement and make it very difficult for stains to adhere to the tile. On the other hand, topical sealants are deposited on the surface and do not allow stains to pass through. In our experience, we recommend avoiding topical sealants, as the sun can wear them much faster, plus they can make your tiles turn very slippery.

In Granada Tile we recommend Dry-Treat sealants and enhancers, which are specially designed to penetrate much deeper into the tiles and resist more stains. The molecules of the Dry-Treat products are 400 times smaller than those of competitors, allowing the compound to adhere to the tile permanently and provide a more comprehensive protection.

How to clean the cement tiles regularly?

Always avoid using acidic substances or chlorine of any kind to clean your tiles. This is extremely important, as any too acidic substance can wear the sealants faster. Instead, use a neutral pH cleaner and water to clean your tiles.

How to clean stains on cement tiles

One of the first things that comes to mind when it comes to cleaning and maintaining cement tiles, are the spots you will face over the lifespan of these. The first step is to understand what type of stain you are dealing with, to know the best way to remove it and restore the tile to its glorious original state. The types of spots that can be found are biological, organic, inorganic, oil or ink.

•     Mildew, fungi, algae; These biological stains appear as a result of the contact of your tile with living substances.
•     Coffee, tea, tobacco, cosmetics or blood; These organic spots come mainly from food and beverage sources.
•     Iron, bronze or rust (rust); These inorganic stains come from raw materials (unprocessed).
•     Oil, fat, body oil, different foods; Sealants typically prevent this type of staining.
•     Inks These stains are typically caused by markers and pens.

Our recommended cleaning method for all of these stains is to use the Dry-Treat Rejuvenate Active, Rejuvenate Spray, Oxy-Klenza or EFF-Erayza products. These products can be used for mopping and cleaning floors regularly, as well as for deep cleanings and stain removal. These products are also perfect for cleaning the mouthpiece or grout.