There are all kinds of natural products and professional systems thanks to which you can easily get the tiles always clean and easily whiten the joints.
The bathroom is one of the rooms where the tiles should always be kept clean for reasons of hygiene. Photo by Serveis I products Catalunya.
Always maintain impeccable bathrooms and kitchen tiles require some effort, especially when not being cleaned frequently. However, the most headaches of the head causes is to prevent the joints blackened and, above all, to get whitening when the dirt has been installed in them. Fortunately, you can always go to simple homemade tricks that facilitate this task:
- To effectively clean All types of tiles and prevent them from deteriorating over time or using abrasive products, the best system is to degrease them with a soft cloth soaked in white vinegar. If you want to get more disinfection you can mix it with liquid soap and a few drops of lemon.
- If the gaskets are blackened but have not lost the grout, it will suffice to pass a cloth with water and bleach, ammonia or hydrochloric acid – strong water-slightly diluted.
- You can also use detergents specially designed for the toughest dirt they sell in specialty stores and department stores. In this case, the best way to apply it is to use gloves – they are usually somewhat aggressive soaps-and a thin brush of hard bristles. Once it is clean, it must be rinsed with abundant water so that there are no remains.
- After removing dirt, you can also apply some commercial product that is recommended to whiten the gasket – they function as a kind of paint that even, in some cases, protects them and keeps them clean for longer.
- Water vapour Cleaning is another system that can be used for both tiles and gaskets. Special machines are usually used – generally managed by cleaning professionals-with direct applicators.
- If the seal gap is noticed because the grout has been lost there are two options: use a gasket repair OR, directly perform the procedure followed to prime the gaskets.
- This consists in acquiring white cement in a specialized store or large surface, dissolving it in water following the instructions of the package – must be a semi-liquid texture solution-and spread it through all the joints with the help of a brush. After approximately 15 to 20 minutes after the solution has dried, residues of excess cement may be cleaned with a spatula or a soft-fiber scouring pad that does not scratch the tiles.