Friday, March 1, 2019

Tuft & Needle Metal Base Bed Frame for California King Mattress by Simple Tool-Less Assembly | Powder-Coated Black Steel | 5-Year Warranty

How do you take paint from a wooden bed frame?

Taking a wooden bed frame of garbage to be valued not only gives you the satisfaction of doing it yourself, you will have an element to enjoy and perhaps pass on to your children. The most important investment when taking paint out of a wooden bed frame is time, patience and elbow grease. When removing the furniture, follow the instructions of the stripper container. According to Dr. K. Leona Hawks of Utah State University, "commercial paint removers are the most effective materials available for use in removing old finishes."



Tuft & Needle Metal Base Bed Frame for California King Mattress by Simple Tool-Less Assembly | Powder-Coated Black Steel | 5-Year Warranty
Tuft & Needle Metal Base Bed Frame for California King Mattress by Simple Tool-Less Assembly | Powder-Coated Black Steel | 5-Year Warranty




Instructions


1 Prepare the work area, covering the surface of the floor or work with newspapers or a tarp. Place the bed frame at a comfortable working height on a table or easels. Have adequate ventilation to avoid inhalation of vapors. Remove all hardware and set it aside for cleaning.

2 Wear gloves and safety glasses. Pour a small amount of the paint remover into a disposable container - paper from the cake pans work well. Cover the paint remover container.

3 Apply the paint remover to the bed frame with a polyester brush, avoiding the use of natural bristle brushes as the remover will soften the bristles. Apply the remover in a thick layer, brushing in one direction. Allow the paint remover to work for the recommended time. The painted surface of the bubble and in the blister will; do not allow the remover to dry before step 4.

4 Scrape the old paint from the bed frame with a spatula. Use a file to round the corners of a metal spatula to avoid speculating on the surface of the wood, or use a plastic spatula. Clean the spatula in the newspaper when it is loaded. Use thick steel wool to remove any remover left by the spatula. Apply remover to the areas that still have traces of paint.

5 Clean the remaining remover from the bed frame with lacquer thinner and steel wool. Cleaning the bed frame with lacquer thinner will not raise the grain of the wood.

Tips and warnings

  •     Paint removers that recommend water for removal will raise the grain of the wood and require sanding.
  •     Wear long-sleeved shirts when working with paint remover, as it can burn the skin.

Sleeptune Compact Adjustable Steel Bed Frame / For Box Spring & Mattress Set / Assembles In Minutes / Fits Twin to Queen

How to build a wooden bed frame

While you can enter any furniture store and purchase a bed frame - wood or metal - sometimes styles in stock may not be what you're looking for. So if your personal tastes are retro, country or contemporary, build a wooden bed frame yourself to match what you have in mind.



Sleeptune Compact Adjustable Steel Bed Frame / For Box Spring & Mattress Set / Assembles In Minutes / Fits Twin to Queen
Sleeptune Compact Adjustable Steel Bed Frame / For Box Spring & Mattress Set / Assembles In Minutes / Fits Twin to Queen




Instructions

1 Choose the size of your bed. Consider the size bed you have now. If you have a queen and you want to upgrade a king, make sure it will fit in your bedroom before proceeding with its construction.

2 Look for bed frame templates. You can find step by step instructions for building a wooden bed frame in your home improvement store, or you can design your own plans by using your imagination and dimensions in step 3.

3 Buy your construction materials. You will need 2 of 8 boards for the entire width and length of your bed. For a double bed, you will need boards 80 inches long on both sides and 60 inches wide for the head and foot of the bed. The standard dimensions of extra-large beds are 76 inches wide and 80 inches long.

4 Gather supplies to build your bed frame. In addition to your 2 by 8 boards, you will need wood screws, a drill, a circular saw, MDF (medium density fiber) or plywood, as well as stains, polyurethane or paint for finishing.

5 Connect your frame with wood screws in the corners. Turn your frame over, face down, and attach the MDF or plywood to the base, which will sit on the floor. If the template requires a pedestal bed frame, this is the place to place the MDF and support structure, along with the reinforcement brackets and wood screws.

6 Light the frame of the wooden bed in an upright position. Attach the MDF or plywood to the top of the wooden bed frame. This will keep your mattress and / or spring base.

7 Finish the construction of your wooden bed frame. Stain the wood or add a layer of polyurethane to protect the wood. If you want to paint your bed frame, you can do that too.

Tips and warnings

  •     You can rent a circular saw to cut the plywood and / MDF boards to your size, or you can make the pre-cut wood in your home improvement store.

Knickerbocker Patriot Bed Frame - King Size - Made in The USA - Strongest Bed Frame - Steel - No Tools

How to build a plywood bed frame

Although neither the most attractive nor the most popular wood for furniture construction, a plywood bed frame is much less expensive than other options. It is also more durable and more tolerant of errors, a ding in a plywood frame is less heartbreaking than in a polished oak headboard. When working with plywood, a frame frame is the best design for your bed.



Knickerbocker Patriot Bed Frame - King Size - Made in The USA - Strongest Bed Frame - Steel - No Tools
Knickerbocker Patriot Bed Frame - King Size - Made in The USA - Strongest Bed Frame - Steel - No Tools




Instructions

1 Set an 18-inch by 74-inch piece of wood and an 18-inch by 39-inch sheet of plywood together in an "L" shape. Arrange them so that the end of the blade already makes butt with the face of the shortest blade. The connection by means of two supports L-SET 2 inches of each edge of the wood.

2 Repeat the first step to build a second "L."

3 Arrange the two "L" in a rectangular frame. Connect the open corners as the "LS" did.

4. Place the other sheet of plywood on top of the frame. Its edges should be aligned with the frame.

5 Nail the plywood sheet down with a nail at each corner and a line of nails along each edge. Space the nails 6 inches apart and drive them through the face of the sheet of plywood at the edges of the image below.

6 Sand the surfaces of the wood with rough grain sandpaper.

Tips and warnings

  •     These plans are for a double bed frame. To build larger frames, start by altering the dimensions of the plywood sheets. For the queen and the larger frames, consider running a third long blade in the center of the box frame to prevent buckling.

WALCUT Twin Size Metal Bed Frame Headboard Footboard Mattress Foundation Platform Bed Adults Kids No Box Spring Needed Black

How to fix a squeaky wooden bed frame

Time causes the wood to swell, resulting in squeaks that were not there before a change in weather. This is a noisy wooden bed frame is frustrating when the squeak that wakes from a deep sleep. Hiding the head under the pillow will not solve the problem. Stopping a noisy bed frame can be done quickly and permanently once the squeal has been located. Soon you can enjoy a quiet night and a peaceful sleep.



WALCUT Twin Size Metal Bed Frame Headboard Footboard Mattress Foundation Platform Bed Adults Kids No Box Spring Needed Black
WALCUT Twin Size Metal Bed Frame Headboard Footboard Mattress Foundation Platform Bed Adults Kids No Box Spring Needed Black




Instructions

1 Isolate the noise, placing it from the plot to find the screech. Two people can do this quickly if one person rocks the plot and the second person locates the noise.

2 Tighten all bolts or bolts that are loose. Rock the bed and listen to the birdie.

3 Remove the screws and spray with a lubricant. Replace the screws and rock the bed and listen for any squeaks.

4 Coat the screws with hard soap or beeswax. Replace the screws.

5 Remove the metal washers and replace with plastic washers. Plastic washers will eliminate the possibility that metal rubbing against metal is causing the noise.

6 Apply talcum powder or wax when the wood is rubbed against the wood. A piece of thick cloth between the joint will also prevent the wood from chafing.

Ecos Living 14 Inch Wood Platform Bed Frame/Steel Slat Non-Slip Support/Classic Brown (Full)

How to fix a wooden bed frame

Although attractive, versatile and cheap, wooden bed bases are less durable then metal bed frames. An easy way to maintain the desired look and versatility of a wooden bed frame, while also increasing its longevity, is to re-enforce a shabby, wooden bed frame with angled steel and wood uprights. transverse planks. With a little help from the local metal store, the steel crossbars are relatively cheap and easy to build.



Ecos Living 14 Inch Wood Platform Bed Frame/Steel Slat Non-Slip Support/Classic Brown (Full)
Ecos Living 14 Inch Wood Platform Bed Frame/Steel Slat Non-Slip Support/Classic Brown (Full)




Instructions

1 Remove the old frame infrastructure from the wooden bed.

2 Clear any bedpost to the bed runner joints, securing a sturdy perimeter frame to the bed.

3 Cut two angular steel struts 90 degrees long. The length of the straps is determined by the length of the bed structure. Cut the struts 2 inches shorter than the length of the mattress box spring.

4 Drill a series of 3 / holes 16 inches along one side of the steel struts 90 degree angle; The holes should be 3 to 4 inches apart (these holes are used to attach the braces 90 degree angle to the structure of the side bed stirrup). Along the opposite side of the 90 degree angle miter, drill four 1/4 inch holes equidistant along the underside of the strut angle (these holes will be used for the bolt to the wood planks transverse to the angle uprights ).

5 Using 1 1/4-inch video screws, screw the metal brackets to the bed frame with the lower angle flush with the side channel plates of the bed frame.

6 Cut four wooden crossed planks. The length of the planks will be determined by the width of the wooden bed frame. Cut the planks 1/2 inch shorter than the width of the mattress frame.

7 with drill and countersunk a hole at each end of the hardwood cross planks and bolt to the struts 90 degree angle.

Tips and warnings

  •     Most metal warehouses will cut their steel struts from the length angle, as well as pre-drill the 1 / 4- and 3/16 inch fixing holes.

Zinus Shawn 14 Inch SmartBase Mattress Foundation / Platform Bed Frame / Box Spring Replacement / Quiet Noise-Free / Maximum Under-bed Storage, Full

How to install a headboard of a metal bed frame

Installing a headboard of a metal bed frame gives a decorative and functional touch to the bedroom, which gives it an attractive place to hang a night mask, dream catcher or other objects you need for your dream. When you buy a separate headboard from your bed frame, you need to connect the two pieces to prevent it from leaning or tilting. Grab a friend to keep everything constant for you while installing the headboard and changing the look of your bedroom.



Zinus Shawn 14 Inch SmartBase Mattress Foundation / Platform Bed Frame / Box Spring Replacement / Quiet Noise-Free / Maximum Under-bed Storage, Full
Zinus Shawn 14 Inch SmartBase Mattress Foundation / Platform Bed Frame / Box Spring Replacement / Quiet Noise-Free / Maximum Under-bed Storage, Full




Instructions

1 Remove the mattress and all the filling from the bed structure, exposing the metal structure itself. Carefully slide the frame out of the wall, exposing the front edge of the entire frame.

2 Slide the headboard into place where you want it to sit after installation. Make sure you stand in the right place. Have someone hold the headboard firmly in place to ensure it remains straight.

3 Carefully slide the bed frame to the headboard so that the holes in the front of the weft line are aligned with the screw holes in the head. Some headers come with bolts pre-installed in the holes.

4 Press the right side of the frame firmly against the headboard. Drive the bolts through the back of the headboard so that they protrude from the holes in the front. Attach the nuts to the screws and tighten them as much as possible as you press the headboard to the metal bed frame.

5 Repeat the nut installation and the screw on the left side of the header. Pull gently on each side to make sure the pieces are firmly fastened. Slide the headboard frame and the bed into position. Reassemble the mattress and the filling.

Tips and warnings

  •     Most header kits come with screws, nuts, bolts and installation instructions. Be sure to read and follow the manufacturer's specific instructions, since different designs will have different requirements.
  •     If your headboard and bed frame do not arrive aligned for easy installation, manufacturers sell adapters that connect the bolt holes in the frame to those in the head. You will have to remove the screws from the head of the bed and install the adapter before fixing the frame of the bed. Follow the specific instructions on the product if you have problems.

Zinus Michelle 12 Inch Compack Bed Frame, for Box Spring and Mattress Sets, Extra High so Bed Risers not needed, Fits Twin to Queen

How to fix a fracture in a wooden bed frame

Wooden beds have side rails that connect the footboard to the head of the bed. The wooden boards that make up the two side rails can divide. In order for the bed to be usable, you must replace the side rail or repair it. The repair of a fracture in the wooden frame is very similar to the repair of a fracture in any piece of wood. Some wood glue is committed to repairing the fracture and a plywood patch will strengthen the frame.



Zinus Michelle 12 Inch Compack Bed Frame, for Box Spring and Mattress Sets, Extra High so Bed Risers not needed, Fits Twin to Queen
Zinus Michelle 12 Inch Compack Bed Frame, for Box Spring and Mattress Sets, Extra High so Bed Risers not needed, Fits Twin to Queen




Instructions

1 Position the side rail on a flat surface and bend it enough to open the split. Squeeze the glue into the split and spread it around using a cotton swab. If the wood has multiple fractures, spread the glue in each division. Shield separated each piece of wood with glue.

2 Place the clamps through the side rail in the split and tighten them. A clamp in the middle and another clamp is necessary every six to eight inches throughout the separation. Clean any glue that squeezes from the divisions immediately with a damp cloth.

3 Wait one hour before removing the clamps. Yellow wood glue bonds so well with wood, the bond is stronger than wood by itself. A division board often has damage that it can not see, and a patch of reinforcement is often necessary.

4 Measure the width of the side rail and the length of the division. Cut a piece of 1 / plywood 4 inches, eight inches longer than the split, with a width that is 1/2 inches smaller than the side rail is very wide.

5 Fasten the plywood to the side rail so that the splitting is superimposed by four inches at each end and centered up and down the rail. Drill four rows of countersunk pilot holes with three equally spaced holes in each row. The rows run up and down the patch and spread evenly across the width of the patch. Keep the holes 1/2 inch from the edges of plywood.

6 Plywood screw for the side rail patch with wood screws and a Philips screwdriver. Do not use a drill because accidentally over-driving the screws will cause more damage to the wood.

7 Rub the wax pencil over any part of the split that remain visible to blend into the finish. The color of the division in the direction of the grain of the wood, which extends along the length of the lane.

Tips and warnings

  •     Patches require extra long rows of screws for every 12 inches in length of more than 24 inches.
  •     Do not screw in the split, and try to keep screws at least an inch away from it.
  •     The 1/4 inch patch leaves enough space for most of the bed springs to adapt, but check to make sure the spring will still fit between the rails with the patch in place.

Zinus OLB-GB-S Folding Foam Guest Bed Frame with Wheels, Single, Twin, Brown

How to repair a noisy bed frame

In this article: Find the cause Stop the noise Test a quick fix

There is nothing more frustrating than sleeping badly at night due to the noise of the bed. Luckily, you do not need to spend a lot of money on a new bed frame to end the problem. If you identify the origin of the noise and adjust and lubricate the joints of the bed frame, you can eliminate the noise and go back to sleep peacefully.



Zinus OLB-GB-S Folding Foam Guest Bed Frame with Wheels, Single, Twin, Brown
Zinus OLB-GB-S Folding Foam Guest Bed Frame with Wheels, Single, Twin, Brown




Part 1
Find the cause


    1
    Remove the mattress and the bed base from the bed frame. The base is made of wood and is located under the mattress. Place the mattress and the bed base on the floor. [one]
    Image titled Fix a Squeaking Bed Frame Step 2
    2
    Check if the mattress is the one that grinds. You must discard it as the cause of the noise before you start working on the bed frame. Get on the mattress and move around a bit. If it grinds, the mattress is the culprit. [two]
    Image titled Fix a Squeaking Bed Frame Step 3
    3
    Check if the noise comes from the bed base. Apply pressure to the top of the bed base and move it. If it makes noise, it is most likely that the problem is the base and not the bed frame. [3]
    Image titled Fix a Squeaking Bed Frame Step 4
    4
    Swing the legs of the bed frame and listen carefully. Noise can occur where the legs are attached to the rest of the bed frame, so try to balance each leg. Try to identify the exact place of the noise.
    Image titled Fix a Squeaking Bed Frame Step 5
    5
    Move the slats on the bottom of the bed frame. The slats are the wooden or metal tables that go from one side to the other of the bed frame. They are the ones that hold the mattress and the bed base. Apply pressure on the slats to know if they cause noise. [4]
       

The friction of wood against wood is often the cause of noise.

Part 2
Stop the noise


    1
    Get the right tools for the part of the bed frame you will be working with. Verify what holds the bed frame together in the area where the noise comes from. If it is a screw, get a screwdriver of the corresponding size. If it's a bolt, you're going to need a wrench.
    2
    Adjust the sounding board. Occasionally, the cause of a noisy bed frame is a simple loose joint. Before disassembling the bed frame, adjust the screws and bolts in the area where the noise comes from. You will know that they are well adjusted when you can not turn them. [5]
    3
    Use a metal washer if you have trouble adjusting a bolt. If you can not fully adjust a bolt against the frame, place a metal washer between the frame and the bolt to fill the excess space. [6]
    4
    Disassemble the board if the noise still persists. With the help of the tools, loosen and remove the bolts or screws that hold the gasket. Thread the loose screws or bolts into a plastic bag so you do not lose them. Separate the two pieces of the bed frame that make up the board. [7]
    5
    Lubricate each component of the board. Apply a lubricant to any surface with both parts of the joint coming into contact, including bolts, hooks or flat surfaces. [8] Try any of the following lubricants:
        Paraffin. It is a type of wax that is sold in the form of a bar, which facilitates its rubbing on surfaces. [9]
        Lubricant WD-40. It is a spray lubricant that is effective in metal bed frames, but ends up drying. [10]
        Candle wax. If you do not get a commercial lubricant, try candle wax. Rub it on the surface as you would with any other waxy lubricant. [eleven]
        White grease or silicone lubricant. Buy white grease or silicone lubricant at the hardware store and apply it to the joint components to control the noise.
    6
    Reassemble the bed frame. Replace all the screws and bolts you have removed and tighten them with the tools. Make sure you adjust them completely to avoid causing more noise by accident.
    7
    Listen carefully to determine if the noise has disappeared. Swing the bed to see if you still hear some noise. If the noise persists, try to identify where it comes from. If the noise originates in a different board than the one you have adjusted, follow the same steps you have done for the other board. If the same joint causes noise, adjust the screws or bolts that hold the joint together a little more.

Part 3
Test a quick solution

    1
    Line the bed frame slats with old clothes. Use shirts or socks that you no longer wear. The fabric will prevent the mattress or bed base from rubbing against the frame and grinding. [12]
    2
    Fill the holes with cork in case you have a wooden bed frame. Check if the bed frame has some space where the mattress or bed base can move and rub against the frame. Place cork in the recesses so that each component of the bed is firmly in place. [13]
    Image titled Fix a Squeaking Bed Frame Step 15
    3
    Put a towel under any uneven leg of the bed frame. One leg is uneven when it does not touch the ground. Place a towel in the space between the leg and the floor so that the frame does not wobble and squeak. [14]
    Image titled Fix a Squeaking Bed Frame Step 16
    4
    Put a book under the mattress near the area where the noise originates. If it comes from one of the slats, remove the mattress and the bed base and place a book on the noisy ribbon. Replace the mattress and base on the bed frame. [fifteen]

Tips


    If there is a hole in one of the joints that is favoring the noise, apply a strip of felt between the two surfaces that meet and form the joint to fill the empty space. [16]

Giantex Twin Size Metal Platform Bed Frame with Headboard and Steel Slat Support Heavy Duty Easy Assembly Mattress Foundation Box Spring Replacement, Black

How do I prevent a bed frame from squeaking?

I recently bought a second-hand wooden bed frame. Everything is fine, except that it screams a lot when I move in it (ahem). Any advice to fix the annoying squeak?

Tester101
Is there much movement involved (in the frame)? How do the joints (screws, screws, nails) join?

Tom Squires
If I push it then it has something to give. The joints are joined by a piece of metal with three slots that are inserted in the sides.

Tester101
An image of the joints can help.

Tom Squires
Yes, I probably explained it wrong. I will try to publish one tonight.

Freiheit
(ahem) "move" on the couch, in the kitchen, in the shower, or ...;)



Giantex Twin Size Metal Platform Bed Frame with Headboard and Steel Slat Support Heavy Duty Easy Assembly Mattress Foundation Box Spring Replacement, Black
Giantex Twin Size Metal Platform Bed Frame with Headboard and Steel Slat Support Heavy Duty Easy Assembly Mattress Foundation Box Spring Replacement, Black






Answers


trailmax

I fixed my metal frame by placing leather patches between the parts that were rubbed. The wooden frame is a bit more complicated: it is not so easy to identify where the pieces are rubbed, but this is the first initial step. I'd say check all the joints and see if you can tighten the bolts or add glue to the moving parts.

Basically, the noise comes from the parts that rub against each other. If you can eliminate the rubbing, or put something between the parts of the brush, that would reduce the noise.

Tom Squires
Paste the joints with PVA possibly?

trailmax
Do not think that PVA will work as a permanent solution, but it will help to identify the problem

chris
You can take some felt or other thick material and cut grooves to pass the metal parts. This will help both to reduce the wood on the noise of the wood and to tighten the joints a little.




loopDev
Most of the time with some wood, it is not the rubbing of the wood that is squeaking, it is its nails, screws, bolts, or what holds them together that touches the wood that squeaks. I would like to surround the frame of your bed and tighten everything. If you find one that does not tighten, you can use some wood glue in the hole to help with the squeaks (if you do not plan to disarm it in the future :))

Martha
Does the bed have slats?
I was ready to throw in a divan for being incredibly noisy, but before doing so, I replaced the laths of luxury laminate wood that I used to have with the cheap wooden slats. The chirps stopped immediately. It turns out, the fancy slats were just a little too big, and the ends rubbed against the frame at the slightest provocation, producing the noise.
I am still using the luxury slats in a different bed, where they work perfectly. The point is, neither the bed nor the slats were guilty; The problem was with the combination.

Tom Squires
If I'm using slats

Tester101
@Tom: does the frame squeak when the slats are not in place? I guess most of the noise comes from the rubbing of the slats (this would be especially frequent during the curtains ... "make noise" movements). You can try to coat the ends of the slats with something that reduces friction (baby powder, silicone spray) or try to secure the slats to the rail (so they can not move). Also check the box spring, inexpensive box springs can be very noisy.




Glenn
We have just solved the problem of squeaky slats. We cut strips of those cheap blankets for egg boxes and wrap them in any place where the wooden slats meet the frame of the bed. No more crunches during fun time!

Steven
Did you just wrap the frame in the foam material?




Fiasco laboratories
Bees wax or paraffin. It is likely that your local hardware store has both, since they are used to lubricate the drawer guides in an older carpentry shop.
Tap the board to apply it where the wood is rubbed. Raise the slats and apply them there too.
Beeswax is slightly sticky and will adhere to the metal, so it will probably also work on the hooks of the metal joint.
Then, squeeze everything that is loose in the head and side rails and everything should disappear.





L. Rostron
Every time I pick up boards from the wooden floor, I spray talcum powder (baby) where the tables sit. The same thing happens, although it is much more difficult to reach the shrill areas, wooden stairs. Obviously, it depends on whether you can access the point where the wood meets the wood, but that is the area to "lubricate". Unfortunately, soft woods tend to wear out and then you need to start over.





belinda


Spray some WD40 on the metal parts (screws), just do this and it works wonders!

Boyd Sleep Arched Platform Bed Frame/Metal Mattress Foundation, Black, California King

How to eliminate noise from beds

Not so much for the noise itself, but the * noise * caused by the
beds, where people make movements, are very annoying and cause
some limitations. It is a matter of safeguarding privacy. TO
Sometimes, we suggest that you put the mattress on the floor, as well as on the
Bed does not make noise. Now, this, but we want to continue with the bed
and we want to solve the problem of * bed noises *, right?



Boyd Sleep Arched Platform Bed Frame/Metal Mattress Foundation, Black, California King
Boyd Sleep Arched Platform Bed Frame/Metal Mattress Foundation, Black, California King




Double wooden bed


To help those who need to solve the noise problem
of the beds, which we present below some useful tips that
They will help you eliminate or at least reduce the noise of the * beds *.


Problem: Bed rocks

Solution: maintain the stability of the bed, with four feet in the
land. If you consider that one foot of the bed does not touch the floor, place one
small wedge of cardboard or wood, properly adjusted to the space
between the two surfaces.


Prolema: The range of the bed

Solution: In the case of wooden beds, the sound often comes from
of the slots on the wooden naughty side edges, or the
contact with the wooden sleeper paddle. Free spaces are
responsible for noise due to the friction of the other part of the
wood. The solution can be moved by placing a piece of
woven in the slot of the sleepers, so that they do not leave the contact
direct between the two pieces of wood. In the case of the palette, what
It is best to put a blanket over the entire length of the bed, between the
platform and the wooden sleepers.


Problem: The bed of the balances

Solution: Often, the screws, after years of use begin to
loose, causing the friction of the different parts leading to the
balance and the creaking of the bed. The solution is to press all the
bed screws. Sometimes noises are also caused because
the bed to balance hits the wall in the head area.
I untied it so as not to touch the wall of the room.


Problem: The range of mattresses


Solution: The spring mattresses over time, begin to lose their
elasticity, the springs begin to be frouchas and grinding. For
make sure that the problem of noise is found in the mattress,
that you should aunt's bed and test it on the spot to see if the
Noises persist. If so, in this situation, it is better to replace the
mattress for a new one. It's a drastic solution, but it's only possible
because there is nothing to do.

If you know other solutions to * eliminate the noise of the beds *,
contribute to enrich this topic by leaving a comment.

Ecos Living Solid Wood Platform Bed Frame with Headboard (King)

Bed bases that make noises: what is the solution for a bed frame without noise?

Surely it happens almost always: you lie on the bed and the bed frame sounds, you rejoin in the morning and the mattress makes noises again, you move a little to turn around and ... again to grind. If you sleep as a couple, it is likely that he or she has also woken up during the night due to its sound. Why are bedspring making noise ? How to get a box spring without noise?

Silence is very important for rest. That's why our bed should be the solution and not the problem to fall asleep. In this post we will give you some tips and explanations of why your mattress makes noise and what solution you can find.



Ecos Living Solid Wood Platform Bed Frame with Headboard (King)
Ecos Living Solid Wood Platform Bed Frame with Headboard (King)




Why there are sommieres that make noises

There are bases and bed bases that make noises for very different reasons. Noise always tells us that something is loose and generates vibrations with movement.

They can be the legs (most of the time), which are loose or badly screwed .

When a very intensive use of the bed base has been made, perhaps over several years, or has been moved from one side to another for various reasons, the nuts and bolts may be loosened , or else the clamps may be somewhat deformed. It can also happen that our mattress makes noise when we are not using standard size legs suitable for the mattress base or upholstered base, or we place a lot of weight on the mattress frequently.

We can know that the problem is in the legs very easily. Just sit or lie on the bed and another person observe the reaction of the legs and structure. In this case the sound will be accompanied by some instability of the bed frame, so the rest will be complicated and the mattress will tend to move too much.

In this case, the solution may be to screw the legs back to make sure they are firm and do not generate noise. However, if the nuts, clamps or screws are badly worn, they will tend to loosen and your bed frame will continue making noises. In this case we recommend that you buy new bed bases, according to the measurements of your bed base.

Maybe the bed frame you chose was basic, of not much quality

Maybe you bought it to get by or the seller who offered it to you said "they are all the same", that "it's not worth paying more for the same" ... The fact is that there are mattress finishes that favor no noise

For example, if the bed bases are subject to the frame of the steel structure by rubber tips , then better. You are minimizing the sound. What is more expensive? Yes, but it can be justified if what you are looking for is absence of noise.

They can also be the sheets of the bed bases

When the problem is in the slatted sheets , the type of noise we hear may be something different, for example from woods that creak when we move or lie down.

This type of sound is a clear indicator that we need to renew our bed base , since it is likely that some of the sheets are damaged, are about to break or have been left loose.

The slatted sheets were not manufactured before now, they are protected with layers of lacquer, epoxy or are finished with anti-moisture vinyl, and they protect them from humidity and temperature changes that favor the sheets are losing flexibility.

Sleeping in this type of mattress does not guarantee the stability and tranquility you need to enjoy a good rest, so you should not wait another day to change base or bed base. In addition, not having a base or mattress in conditions can affect the useful life of your mattress , being on a less rigid and unstable basis.

And it may be that your floor is uneven

Sometimes we can go crazy looking for that sheet that makes the noise, or that has been damaged ... and what happens is that the ground is uneven. This also happens a lot with the canapés: my canapé makes noise! , and after a mounting team arrives at the user's house ... we realize that the problem is on the floor: if the support points of the sofa -also in the case of the mattress- are not at the same height, the base limps, and by forcing the point or the points of support to reach the ground, the structure, the perimeter is forced, and makes noise.

How to take better care of your mattress to prevent it from deteriorating?

There are box springs that begin to make noises shortly after buying them. And the problem is that we have subjected them to a weight for which they are not adapted, perhaps because we are using an inadequate type of mattress or because they are low resistant beds that are not prepared for certain types of mattresses and people of a certain physical complexion.

One of the ways to prevent your mattress from deteriorating in a short time is to make sure that you choose a good combination of mattress and mattress for the person who will sleep in it. Also try not to put too much weight on the mattress too often. In this way both your mattress and your mattress can have a perfect coupling and you can take better care of both one and the other.

In Colchones.es we try to help you choose the most suitable mattress base or base for your mattress . If you are tired of the mattresses that make noises and you are also going to buy a new mattress in our store, you will see that below the description we suggest some bed bases or recommended bases to use with that mattress.

When do I change the mattress and what mattress without noise do I need?

The materials do not last forever, this must never be forgotten. When you notice that your mattress is making noises and shows clear signs of having lost rigidity and stability , it is time to change the mattress.

For those who do not want to have noise problems with the legs , a fixed sofa without legs is the most appropriate, since it is attached to the floor, so it is the most comfortable and avoid those uncomfortable noises that make us wake up when we least expect it.

However, it is true that canapés can be more expensive, so if you do not want to spend too much, it is true that there is also a wide variety of steel frame upholstered bases and bases , high strength and great rigidity with a long life that will allow us to sleep without our bed making noise.

For those who prefer an upholstered base, Flex's breathable Tapiflex base offers great durability, stability and strength. It also has a double structure with 5 reinforcing metal crossbeams and is ideal to combine with spring mattresses, so it can be a solution for you if you are tired of your bedspring making noises.