Multi-Purpose Scrub Sponges for Kitchen by Scrub- it - Non-Scratch Microfiber Sponge Along with Heavy Duty Scouring Power - Effortless Cleaning of Dishes, Pots and Pans All at Once (6 Pack, Small)

How to Clean the Oven?

How Does?

The ovens, which have a large share in the preparation of delicious cakes and pastries, have an invaluable function in every household. The ovens, where the freshest breads, soft muffins, mouth-baking cookies and meat dishes are cooked, need to be cleaned from time to time. Due to the steam of the food, a layer of dirt and oil forms in the oven after a while. In standard conditions, the inner surface of the oven and the glass need to be cleaned after each firing. It is time to clean the ovens, which you sometimes postpone because of the hustle and bustle. How Does? Now, starting from the information about the oven cleaning prepared for you!

Here are the easiest way to show the most effective results and oven cleaning methods!


1) Carbonated Water

Nasıl How to clean the oven interior? Bir It's a question many people think about in the kitchen. The iron and internal surfaces of the furnace, which has become contaminated over time and coated with oil, can be very clean. To clean all points of the oven, you can follow these steps:

Mix the water with carbonate in a container or spray bottle.
Then spray the mixture on the inner surface of the oven. If you do not use a spray bottle, you can clean it with the help of a cloth.
Soak the carbonated water dispersed in the oven for about 30 minutes.
When the dwell time has elapsed, wipe the side surfaces and the bottom of the oven with a damp cloth.
You can extend the life of the oven by applying this easy method after each firing.


2) Ammonia

You can clean any type of oven with ammonia in many cleaning products. If you think about how to remove ammonia and furnace oil, the steps you need to follow are:

Mix half a glass of ammonia and 2 glasses of water in a container.
Apply the mixture to all surfaces of the oven. During this time, remove the oven wire, if any, from the thermometer. You can use the kitchen sink for the oven wire.
After dispensing ammonia water in the oven, keep the oven door closed for several hours.
Ammonia will dissolve in the oven and dissolve the oil and burns from old fires.
After waiting for a certain time, you can clean the whole surface with a warm cloth.


3) Vinegar and Soapy Water

Economical and natural cleaner vinegar this time in the oven cleaning work. We came to answer your question of how to clean the oven glass with vinegar. Oven glass, which is the most contaminated place in oven use, can be filled with brown stains if not cleaned for a long time. You can use vinegar and soapy water to prevent this bad appearance. If vinegar and soap are ready, you should:

Add vinegar and water of the same size into the mixing bowl.
Add the same amount of liquid soap or grated soap to this liquid mixture.
Add any other material in the same way as to support the easy removal of oils and mix all the ingredients.
You have created your own cleaning detergent from the materials you mix. Now you can clean this oven with the help of a sponge.
After finishing the cleaning, you can make the oven look brighter by finishing with a damp cloth.
You can also use this mixture to clean the oven wires using a dishwashing sponge.

4) Lemon Water

The method of cleaning the oven with lemon water is more preferable to remove bad odors and give the oven shine. It is recommended to apply after heavy oven food and fish dishes to avoid odor in the oven. If you want to know how to maintain oven hygiene using lemon water, take a look at the steps:

Add warm water and lemon juice into a medium-sized bowl.
Then wipe the mixture with a cloth or glass cloth.
Rub the glass part, base or side surfaces of the oven well with lemon water. The warm water will make your cleaning work easier.
Thanks to the smell of lemon, the smell of food in the oven goes away. You can add innovation and hygiene to the oven by trying this method at any time.

5) Soap and Orange Oil

Finally, we look at the cleaning of the oven from an ecological point of view. We recommend oven cleaning detergent in the most economical and healthy way. This mixture is very easy to prepare and must be applied regularly. Here are the hygiene steps you need to take to extend the life of the oven and find the oven always clean:

Mix 2 tablespoons of soap, 2 tablespoons of carbonate, 1 teaspoon of orange oil and about 1 cup of hot water. Continue mixing until all ingredients have melted.
Before starting the cleaning, let the oven run briefly at 140 ° C and switch it off after 10 minutes.
Distribute this mixture inside the oven while the oven is not operating.
Allow the detergent to remain in the oven for a while.
Finally, wipe the whole area with a damp cloth.
With this method, the oil and dirt in the oven will be cleaned and an orange scented air will come from the oven.
26Axx
Multi-Purpose Scrub Sponges for Kitchen by Scrub- it - Non-Scratch Microfiber Sponge Along with Heavy Duty Scouring Power - Effortless Cleaning of Dishes, Pots and Pans All at Once (6 Pack, Small)

100-Pack Magic Cleaning Sponges Eraser, Household Sponge Eraser Cleaner Foam Cleaning for Kitchen, Furniture, Car, Leather

How to Clean Burnt Pots?

Easy Cleaning Tips

Some kitchen accidents can be annoying for housewives who spend most of their time in the kitchen. Especially in the case of crowded families, such as the high number of meals and the rush of cooking sometimes leads to thoughtfulness, the remedies in the kitchen do not run out!

Who wants to clean up the kitchen and do the dishes after a nice dinner? Cleaning, especially after greasy and heavy meals, can be a bit difficult for housewives, as well as cleaning burnt pots caused by minor kitchen accidents can often turn into a nightmare.

Are you a frequent culprit? Looking for answers to questions such as how to clean a burning pot or how to clean the bottom of a burned pot?

It is much more enjoyable to spend time in the kitchen thanks to these methods that will eliminate your kitchen accidents in a short time! Let's find the answer to the question of what cleans the burned pot together!


1) No Scratches in Pot!

Teflon pots are very useful for your kitchen, although they are manufactured to be resistant to damage, they may lose their properties as a result of wear. Cleaning the pots will also be important for you, especially if you like to host guests and often set up nice tables.

If you have a burnt or darkened teflon pan and you say how to clean a burnt teflon pan, you should follow this practical method!

Put enough water in your pan to cover the burnt area and add some dishwasher detergent.
In this way, boil the water in the pot and let stand overnight.
At the end of the night, you will see that the burned parts are easily cleaned with the help of a wooden spoon.
After making sure that the burned parts have been completely cleaned, place 1 cup of carbonate in the pot and add water.
You can continue to use it by cleaning the pot which you have kept waiting for another night.


2) For Stubborn Stains: Natural Cleansing with Vinegar

Vinegar, which is the biggest help of housewives, is very important for kitchen cleaning.

Especially if you are complaining about the darkness of the bottom of your steel pots, put 1 cup of vinegar in the pot and cover and let stand overnight.
The next day, you can clean your pan thoroughly with detergent sponge and say goodbye to the darkening pots.


3) Fast and Effective Solution with Carbonate

If it comes to cleaning, carbonate can be your biggest helper! Carbonate, which is useful in many areas and frequently preferred for its easy accessibility, is an effective method for cleaning burnt pots.

If you have forgotten your pot on the stove and the bottom is dark, first remove it from the stove and clean it with a wooden spoon while it is still hot.
Then allow the pan to cool.
Add enough carbonate to cover the bottom of the pot that reaches room temperature and add water at room temperature.
Put it on the stove again and let it boil.
You can adjust the amount of carbonate and water according to the size of your pan.
After the burnt parts at the bottom of the pan begin to soften, drain the carbonated water and allow it to cool again.
After you have completely cleaned your cooling pan, you can continue using it.


4) Practical Cleaning with Detergent

It is now very easy to find an instant solution to your cooking pot that keeps the bottom in a moment of thoughtfulness while cooking!

If you prefer to add some dishwashing detergent or powdered laundry detergent, fill the pan with enough water to cover the detergent and boil it on the stove.
Scrape the burned parts with the help of a wooden spoon and slowly while boiling water.
Then drain the boiling water and clean your pan thoroughly with a sponge.


5) The Miracle of Lemon and Salt

Another way to clean your pan that has blacked out or burned down is much easier thanks to the powerful combination of lemon and salt!

To apply this method, first add 1 tablespoon salt and 2 tablespoons lemon juice to the burned pot or pan and soak for half an hour.
At the end of this period, with the help of a sponge that does not damage your pot without too much pressure and scrub clean.

25Axx
100-Pack Magic Cleaning Sponges Eraser, Household Sponge Eraser Cleaner Foam Cleaning for Kitchen, Furniture, Car, Leather

OXO Good Grips Stainless Steel Sink Organizer

How to clean steel pots?

Food is cooked every day because of our natural need. Steel pots are generally preferred for this process. When the food is eaten, it comes to the dishes.

After a routine meal, the steel pot is easily cleaned with a soft surface sponge foamed with a liquid dishwashing detergent. An amount of ammonia cleaner may optionally be used. It is thoroughly cleaned and dried under the last running water.

If there is a burn stain, the pot is filled with water until the burn stain passes 2-3 cm. Put one or two tablespoons of powdered detergent in tablet form and boil for 10 minutes. In this way, it is kept for several hours or overnight. Then the burn with a wooden spatula can be easily removed.

If it is desired to use natural methods instead of detergent, a large amount of carbonate is poured after removing the burn residues at the bottom of the pan. Water is filled to the top of the burning section.

Cover the lid and leave for 3-5 hours. Then scraped with the help of a wooden spatula and washed with foam sponge. The same process can be done by replacing carbonate with vinegar.

After this process, if you want to polish the steel pot, it can be wiped with vinegar dipped in water. Or it can be easily polished by rubbing with lemon peel. One of the most effective methods for steel pots is washing with apple peels. It can be boiled with apple peels after washing. It will be bright when it is dried.


24Axx
OXO Good Grips Stainless Steel Sink Organizer

Scotch-Brite Dobie All-Purpose Cleaning Pads, 24 Pads Total

How to Clean the Burning Pot Easily?

Minor kitchen accidents can happen all the time, "Oh, it doesn't happen to me." not saying, "Does the pot burn?" Let's say from the beginning.

A small moment of thought comes to mind, you can go to the bottom of the saucepan to shorten, or for example, you can not calculate the time correctly, you can cause the saucepan to stay on the stove for a long time ... This is the kitchen, everything is possible.

That is why if a cooker burns, we must learn how to behave, and most importantly, how to clean the burned cooker.

At home, you can clean your burning pot with a few simple ingredients without making any harm, and perhaps save it from being thrown away.

Let's take the carbonate like this:

Carbonate, one of our biggest cleaning aids, is at work again! If you have a pot that holds the bottom and burns, remove it immediately from the stove and clean it with the help of a wooden spoon while it is still hot. Allow to cool for 1-2 hours after scraping with a spoon as much as possible without damaging the pot.

When the pots come to room temperature, put about 1-2 tea cups of carbonate until they cover the base. (You can increase or decrease this amount according to the size of your pot.) Then add 3-4 cups of water at room temperature and take the pot back to the stove and let it boil. As the water is boiling, the remaining dirt and stains sticking to the bottom of the pan will gradually soften.

At this stage, if you wish to scrub with a heat-resistant and soft-tipped cleaning brush, you can remove the softened dirt from the bottom of the pan. Then drain the contaminated carbonated water from the pot and allow the pot to reach room temperature again for about 1 hour.

If there are still stains, clean the remaining stains by gently rubbing with a clean dish sponge where you have poured a tablespoon of carbonate over it, taking care not to scratch the pot. That's it!

For more stubborn stains, vinegar is also work: the method of getting rid of stubborn stains on the bottom of the burning pot

If you think that the carbonate method will not work well enough, or if you still have some stains, you can get support from the vinegar. At this stage you can use any type of vinegar, but the most important help in cleaning vinegar is white vinegar. You can easily find white vinegar in the relevant department stores of major markets.

If the nits are ready, let's go to the second method that will answer the question of how to clean the burning pots. Use a wooden spoon to remove any remaining food from the bottom of the pot holding the bottom. Then place a large amount of vinegar over the unstained stained areas to cover the entire base of the pan (if there are persistent stains on the edges). As much as you put vinegar on it, add this at room temperature. Finally add about 1 tablespoon of carbonate to this vinegar-water mixture and mix.

Take the pot to the stove and start boiling. Boil for about 15-20 minutes. Remove any dirt that will begin to soften during this boiling period, either with a wooden spoon or by gently rubbing with a heat-resistant, very hard cleaning brush. Thus, the bottom of your saucepan will not fill with scratches, stains will be easily removed.

After this, put the pan aside and allow it to cool. Drain the dirty vinegar water and complete the final cleaning-rinsing process with a dishwashing sponge.

What about the exterior: How to remove stains on the outside of the burning pot?

We saved the bottom of the saucepan from the remains of food, stains that became more stubborn because it burned, but stains can occur on the outside of a burning saucepan, and this should not be forgotten.

To get rid of the stubborn stains on these black and brown shades outside the burning pot, you can use the following procedure: Allow the pot to cool. Sprinkle carbonate over the stains on the outside of the pan that cools to room temperature. In the same way, put 1 tablespoon of carbonate on the clean dish sponge. Squeeze the juice of half a lemon on the carbonated sponge. Immediately rub the sponge stained areas, which will begin to foam immediately, making sure that the stains are removed.

If a large part of the stains are still stained on the outside of your saucepan that will come out with this method, place hot water in a larger saucepan or pot than the stained pot, add 3-4 tablespoons of carbonate on it and place the stained parts of the stained pot in such a way that it is in this mixture. Soak it for at least 3-4 hours and then remove any soft spots with a clean sponge. Enjoy your brilliant pot again!


23Axx
Scotch-Brite Dobie All-Purpose Cleaning Pads, 24 Pads Total

Scotch-Brite (2 Dishwands and 6 Refill Replacement Heads) Heavy Duty Dish Wand Sponge For Kitchen Sink Cleaning Brush

How to Clean a Burning Pot?

Burning the pot is not only the job of novice cooks. It could happen to all of us. Even a moment of thoughtfulness may cause the bottom of the cooked rice to hold and ruin our favorite pot. Some people even thought that the pot was bad in such cases and threw the pot, but isn't it a shame for your money? However, if you know how to clean the burning steel pot in such cases you will not throw your pot in vain. You will be amazed at how easy it is. Just by following these five steps you can have a new pot. Who knows now that you sometimes get the bottom of rice?
How to Clean Burning Pans: Tip 1
Step 1: Fill the Hot Water

The first thing you need to do before you start to grapple with burn stains is to keep your pan or pan in hot water. The quickest and most effective way to do this is to boil some water in your kettle or kettle and fill it into the pot until it covers the burned areas. If your pan is deep and the burned areas are up to the top of the pan, you may need to boil twice. Pouring hot water into the pan will not remove stains on its own but will soften the burned food adhering to the pan, making it easier for them to come out. You can now pour the water and remove these softened impurities. You will realize how easy this method makes your work. You can also add some dishwashing detergent while filling the pot with hot water. If you wait at least an hour after you have filled the pot or hot water with your ceiling, or if you leave it at night and clean it in the morning, you will notice that even stubborn dirt is very comfortable.

Step 2: Use the Right Products

When cleaning pots and pans that burn , it is very important to use good quality dishwashing detergents such as Cif Cream . Be sure to follow the instructions on the product. After filling the pot or hot water with a small amount of high-quality dishwashing detergent
Step 3: Apply Paste to Stubborn Dirt

As long as you follow the first and second steps, you can get rid of most of the dirt on your cookware or ceiling. However, some stubborn dirt, especially residues adhering to burnt oil, can still be noticed. The trick to getting rid of them is the paste you will prepare by mixing carbonate and cold water. Mix the carbonate with a small amount of water until it becomes thick and putty. Be careful not to become fluid. Apply this mixture to the burnt residue and leave for one or two hours. Carbonate can also be used in house cleaning very well. It is especially successful in removing stains that you think will never come out.
Step 4: Rub and Wipe

If you want to learn how to clean burnt pans and pans, there is one important thing to remember: Never rub the burned pan with steel cotton or metal dishwashing. Don't even mention the name of them next to your ceiling so that the taste does not escape! The main enemy of stainless steel pots is steel cotton and metal dishwashers. It is therefore better to use a soft sponge or cloth to remove stubborn stains after applying carbonate paste on the pan or ceiling. Ultimately, this paste also has an abrasive feature, so you don't want to tire your pot any more. It is better to use the scrubbing wires on your old and disposable pots. Rubbing is the quickest way to get rid of the remaining burn stains, but if you choose to wipe dishes gently instead of rubbing, you will not scratch your dishes, especially if you take better care of your stainless steel pans and pots.
Step 5: Rinse as usual

This is the answer to the question of how to clean the bottom burning pots. However, you can also add the last step, rinse. Even if you're going to put your pot in the dishwasher after removing the stains. Otherwise, rinse one last time so that your cookware is completely free of dirt and other debris.


22Axx
Scotch-Brite (2 Dishwands and 6 Refill Replacement Heads) Heavy Duty Dish Wand Sponge For Kitchen Sink Cleaning Brush

Twist Scrub Sponges(Pack of 3)

How to Clean Burnt Pans?

A pot forgotten on the stove when cooking… The smell of burns all around. First, the sad food, then the bottom of the burnt pot that holds the bottom of how to clean the black think. This is a scenario we all live from time to time. So how to clean the bottom of the saucepan, how to remove the burn remains. There are several methods of recovering burned, burned pots. 3 things determine which method to use. Which material is made of the burning pot, what is burning inside and how long you have to clean.

Using Dishwasher Detergent

This method is particularly effective in pots with burnt layers at the bottom. It can be applied to all kinds of food burns and all kinds of pots . You can also use powder washing machine detergent.

Add the amount of water in the pot to the burned part a few inches.
Put the dishwasher detergent in the form of tablets. (Or you can use 2 tablespoons powder laundry detergent)
Boil for 10 minutes.
Let stand for a few hours or a night.
Then move the edge with a spatula, the burned sheet will rise in block.

Using Carbonate

This method is effective in lightly burnt pans and pots.

Immediately scrape off any residues in the burned pot with a spatula and wooden spoon.
Leave to cool for 1-2 hours
Put plenty of carbonate (about 1 cup) in the pot
Add water above the burning section
Close the lid and leave it for 3-8 hours.
Then scrape off the edge with a hard plastic or wooden spatula
Clean with a green scouring sponge.

Using Vinegar

This method is safe to clean steel pots and pans.

Put enough vinegar to burn the burned part
Close the lid and leave for one night
Clean the next day with hot water and scrubbing sponge.

Method for Enamelled Cast Iron Pots

First let the burn pan cool itself,
Then pour plenty of liquid detergent into the pot
Fill the pan with hot water and froth
Soak one night
The next day, try to clean the burns with a soft green sponge.

If this method is not successful

Pour plenty of carbonate or powder laundry detergent into the pot
Remove stains by rubbing with corrugated green dishwashing sponge.

Another method is

Mix 1 part salt with 2 parts lemon juice
Wait half an hour and gently rub.

Method for Cast Iron Pots

Allow the pan to warm slightly
Then put 1 tablespoon powder laundry detergent in 1 liter non-boiling hot water
Place on medium heat stove
Boil for a few minutes
Then pour this juice
If the pot has not been cleaned, repeat the process.


21Axx
Twist Scrub Sponges(Pack of 3)

Magic Eraser by Mr. Clean, Variety Pack, Cleaning Pads with Durafoam, 6ct Twinpack

How to Clean Burnt Pots?

You put the food in the stove, but you started to do something else ne What is that? Bad bad smells coming from the kitchen! Your food in the pot was burnt. Besides, the pot is black. So what to do now? You've made another meal, but how do you clean the burned pots?

Firstly, the cleaning of the burned pots varies according to the type of the pot. You cannot use the same method for steel pots, teflons or cast iron pots. Let's take a look at how to clean burnt pots by species:

Teflon cookware:

This type of pot is extremely sensitive to scraping or rubbing with wire. If you want the pan to be cleaned undamaged:

1- Put enough water in the pot on the burned part. Put in dishwasher detergent or 2 tablespoons laundry detergent. Boil the pan. After one night, remove the burned parts with a wooden spoon. Wash with detergent.

2- Clean the burns with wooden spoon as much as you can. Put 1 cup of carbonate in a saucepan and add water. Leave the pot for one night, then clean with a wooden spoon and sponge.
Steel pots:

1- Steel pots are suitable for cleaning with vinegar. Pour 1 cup of vinegar into the saucepan and cover and let stand for one night. The next day you can clean it with a green scouring sponge.

2- You can apply the dishwasher detergent or laundry detergent method we recommend for Teflon pans in steel pans.

3- You can keep the carbonated water in the pot and then rub it with green sponge.
Enamel cookware:

1- Wait until the pan has cooled down. Add plenty of liquid dishwashing detergent and water and foam. Then let stand for one night. Rub the next day with a scrubbing sponge.

2- Pour plenty of carbonate into the pot and rub with sponge.

3- Put one part of salt and two parts of lemon juice in the pot. Leave for half an hour and then rub.
Cast iron cookware:

Put laundry detergent and some water in the pot. Then boil for a few minutes and clean with a scouring pad.

So far, we have explained how to clean burnt pots with the help of common materials. However, there are also commercially available cream detergents for heavy, sticky soils and burns. If you have any of these detergents at home, spread the cream detergent on the burn, pour hot water on it. After waiting for one to two hours, you will see that the burn is easily removed from the pot. Remove the large pieces with the help of a spatula or wooden spoon and squeeze a little cream detergent onto the sponge and rub your saucepan. Here, your pot is sparkling. Health in your hand.


20Axx
Magic Eraser by Mr. Clean, Variety Pack, Cleaning Pads with Durafoam, 6ct Twinpack

Antimicrobial Sponge Set of 4, Non-Abrasive Scouring Pad w/ Fading Monogram, Antibacterial Sponge Replacement Tech. Modern Kitchen Sponges w/ Smell Resistant & Bacteria Resistant Polyurethane Foam

Washing dishes quickly with your hands without detergent

After the holidays, many kitchen utensils remain, I want to wash dishes quickly and save time. There are a few secrets to solve the problem. It will help to quickly get rid of dirty plates in order to effectively deal with various contaminants in the future.
Public dining facilities have rules and health rules governing the implementation of this procedure:

rinse the crystal with a soft cloth moistened with warm water and an alcoholic solution;
enameled products should not be washed with hard sponges damaging the coating;
The cast iron boilers are washed in warm water using detergent. To avoid leaving marks, lubricate with oil and wipe with a napkin to remove residual oil;
glassware should be washed with soapy water in warm water;
The aluminum plates are cleaned with soda, after rinsing wipe with a dry towel.
Dishes are made from different ingredients. During cleaning, you need to consider the ingredients, use the right tools to wash utensils. This will allow you to perform the job quickly and accurately.

How to optimize dishwashing
You need to take two minutes to wash dishes quickly by hand and prepare for a positive result. Properly organized operation will minimize kitchen distress:
The main situation is washed immediately after dinner. Now the food dries on the plates, it is difficult to wash with a simple sponge.
If you do not have time to wash immediately, it is better to soak it in a basin or wash it with water.

Use kitchen sponges to wash, discard old cloths.
Separate plates, pans, forks and spoons. This will save time.
Clean the products, then rinse under running water.
Wash household pans and pots as a last resort using household chemicals for cleaning.
Saving on water. To wash utensils, perform the operations in the basin.

Sort by ingredients.
Stainless steel, cast iron or enamelled products soak for half an hour, wash with a sponge using household chemicals.
Do not put wet containers in the cupboard. Spread a dish towel, place the washed items on it until completely dry.
After the process, wipe the fork, knife, spoon and glass with a dry towel to avoid leaving any marks.

Use a dishwasher.
Not everyone has a dishwasher, try to optimize the washing process. Do not be afraid to try or use homemade ingrained pollution methods. If there is no liquid to wash kitchen products, folk remedies will be won.

Fast hand washing methods
Washing dishes after a meal is a simple matter. You can use the dishwasher to get rid of stubborn dirt, plaque, old oil, and you won't waste time in household chores. If not, you have to wash your hands.
Choose a detergent, prepare tools to remove dirt, so you have everything.

suck
It is not necessary to use household chemicals for burnt plaque. Soak and wash with sponge. Immerse secrets and rules:
soak the dishes with hot water, soap or other household chemicals;
divide and separate kitchen utensils into several pots;
soak a large number in several parties;
forks, knives, spoons, crystal, glassware soak for 5-10 minutes;
pots and pans should be oxidized with hot soapy water for 20 minutes.
Water, dirt and oil containing household chemicals can be easily separated from containers. Dishes do not have to be scrubbed with a metal brush.
After immersion in water, the operations are easily carried out without force.

washing
Depending on the material, the type of detergent is determined. For ordinary plates, use a sponge in pans. Clean each container from both sides. Then go to the forks and spoons. Wash the dishes in the sink for further processing. In the next step, rinse the washed utensils under running warm water and place them on a dry towel.

Top tools overview
Get rid of unpleasant smells, wash utensils to shine, remove the plate from coffee and other beverages in a universal way. Don't waste your time on proven methods. Different tools for washing dishes. Composition from different manufacturers. There are a number of popular methods of dealing with pollution that are better than household chemicals.

Improvisation tools
If the usual detergent does not cope, improvisation comes to the rescue to create a proven life segment improvised solution. Mustard, citric acid, ammonia, laundry soap, washing powder, soda and salt are suitable.

The action of each resource separately:
Mustard powder. Rub the dirty dishes with mustard powder and leave the container for 15-20 minutes. Wipe with a kitchen sponge and wash with warm water.
Ammonia. Ammonia even helps to cope with old, stubborn pollution. Put a few drops of alcohol on the kitchen sponge, crawl to dirty places. Wash containers with warm water.
Citric acid. Remove dishes from the sink, rub with citric acid. The container is left for 20-30 minutes, rinsed with warm water and washed with a detergent.
Laundry soap. Rub home soap with hot water, soak dirty containers in prepared container. Rinse each container with clean, warm water, then rinse thoroughly to remove debris.
Soda. The soda composition contains abrasive particles that can cope with old oil or scale. Rub the hard side of the sponge with soda. After rinsing, glasses, pots and other items in the kitchen shine.
Cooking salt Heat table salt, rub in dirty containers. After 20 minutes wash thoroughly with detergent.
Using table salt, get rid of the unpleasant odor in the refrigerator.
Using soda, it is easy to clean your microwave, oven or other utensils. You can use sand, apple extract, table vinegar and wood ash to clean the burned areas in the aluminum cooking tray.

expert
A wide range of culinary products is available in the household chemicals shops. Difference in price, manufacturer, composition. They are available in powder, gel, tablet form. The dishwashing detergent contains sudsing surfactants (surfactants).

A large amount of foam does not guarantee a high quality cleaning of the containers.
They are all connected to additional components that make up the detergent. Salts of inorganic acids are added to the composition to aid in the removal of oil and other contaminants. Enzymes as additives allow you to remove insoluble protein contamination. Quality products are easily washed off the surface of kitchen utensils. Wash children's dishes with special products that do not contain hazardous chemicals.
Dish washing is not difficult, it is boring and monotonous. Observe the basic rules of this procedure, choose the type of material, the correct materials for cleaning. You can handle daily tasks quickly and efficiently.
Very few people know about washing dishes and washing dishes quickly. And very few people in a poll say they want to wash their kitchen utensils. Often, this process causes only negative emotions.
How to wash hand dishes? This question primarily concerns housewives who want to maintain a perfect order in the kitchen. The easiest way to solve a problem is to buy a dishwasher, but not everyone can afford it, so it's worth looking for another way out.
Particularly difficult is washing dishes from brittle materials. Therefore, the problem of washing dishes becomes urgent, although not all detergents are harmless.

And if you know exactly how to remove it, it will not take much time to wash the burnt oil.
There are many practical suggestions for quick cleaning of kitchen utensils, but are they all really helpful? Utensils that absolutely contaminate kitchen utensils create additional challenges for ourselves while washing, but this is not a reason to reject delicious and nutritious dishes.
First you should wear aprons and rubber gloves. The first is to protect the clothes, the second is to protect the hands.

Kitchen utensils are optimally washed with the following accessories:

The funds created to wash will come to the rescue. Or you must be patient and heat the water in the stove.
How to wash dishes, When it is not possible to wash the detergent with plenty of hot water?
Most housewives wash utensils in the sink. The basin should be used most often in field conditions. The proponents of the tradition of using soaps and soda think that these two tools will surpass the efficiency of all modern household chemicals. To clean dishes - no less important problem. The choice of cleaning products in the store is great, but how to choose one of them is cheap and good quality, or will there be enough soap?

You should not overdo them with detergents, because they are all harmful to the body and are very difficult to wash off the surface. To do this, you need to rinse your kitchenware many times.
The high price of the detergent is not always an indication of its high quality. Detergent may cause skin damage if washed without gloves. If swallowed with food, detergent can cause serious illness.
If the plate is a whole mountain and the main place on this mountain is to cook in oil, wash the dishes? Any hostess will wash their kitchen utensils, but it is also desirable to be satisfied with the result.

it takes a lot of time to clean the pots, especially if they are very dirty. Therefore, it is best to start with a lean “cleaner” kitchenware. These are usually cups and glasses, forks and spoons.
Performing a job of the same type allows you to automate the process so that the job is completed faster. If you first wash the fork, then the plate and the glass, you will have to rebuild it for each new operation and therefore the precious seconds will disappear. Wash all kitchen utensils without grease at one time, it is much easier than replacing it with greasy plates. In particular, plates should still be removed from food waste.
How do you clean dishes so that they are easier to wash after that? Use high-quality detergent and wash one kitchen utensil first, then the other.

AOS is antibacterial.
Frosch.
Fairy.
Eared nannies.

It is best to clean the dishes until the food dries. It is very important to clean the kitchen utensils from the oil before spending the night in the sink, so less time will be spent in this type of work. Timely cleaning dishes will help eliminate most problems with unpopular work performance.

protein will not endure and it will be easier to wash.
Another problem of housewives - strong smells.
It is very difficult to wash dishes after components such as:

garlic;
herring.

In the hostess handbooks, it is recommended to wash the tableware containing the above products with a weak vinegar solution. If the plates and cups have picture decorations, they should not be washed with soda and scouring powder. Hot water can also distort the picture. It is recommended that iron and iron pans be dried well, otherwise rust may form on their surface.

It is not difficult to clean dishes at home, the main thing is not to damage the surface and to obey the rule - to clean dishes in time.
Acid is harmful to aluminum cooking pots, so you should carefully examine the composition before using a foreign product. It is convenient to cook in enamel pans, but food is usually burned in them. It is not necessary to use soap solutions to wash enamel dishes and to clean them with metal cloths.

Another equally effective detergent is soda. How to clean dishes with this component? Crystals can scratch the surface, so not all dishes can be washed with soda.
Salt can quickly remove burnt fats. Spoons and forks are perfectly cleaned with tooth powder.
If we wash dishes without chemicals, the washing quality is not bad, because most housewives are accustomed to smelling plenty of foamy and pleasant odor, and wouldn't want to use dirty dishes for food? The answer is simple: when you buy a household dishwashing detergent, you can refuse to use chemicals safely.
The formation of limestone in the kettle can be a major problem. It is very difficult to remove this solid layer from the walls. Special tools that can be easily purchased from any specialized department of the store will help solve the problem.
If you know how to do it right, washing dishes is not a problem. It is better to wash the dishes, ask for detergent sales consultants in the departments.
Remember, with the right approach, washing dishes at home can become an easy task.

At first glance, it is clear that the dishwashing process is absolutely not difficult - even a child will handle it. In fact, it is important to choose a suitable detergent and a number should be monitored. Today I will tell you how to clean dishes properly with your own hand.

Perfect Washing Technique: 5 General Rules
If you follow the five basic rules, wash the dishes properly. Consider all the nuances in the table:

rules

Rule 1. Remove food residue.
Before washing dishes, you must remove any remaining large food. Clean them with any suitable object.
If something sticks firmly to the surface, immerse the plate in water 5 minutes before washing.

Rule 2. Observe the order of the dishes.
Separate all soiled dishes: wash dishes, dishes and cutlery separately.

Rule 3. Clean all dishwashing surfaces.
For example, the plates need to be washed not only from the front. Foam all surfaces, then sponge onto a plate from all sides.

Rule 4. Clean large plates.
Manually washing large containers takes too long, so I suggest you finally start cleaning them.
If there is too much oil in the pan or burnt food residue, leave it for 10 minutes.

Rule 5. Effective drying.
Clean plates must be dried. There are two ways:
Allow the dishes to dry by themselves at room temperature.
Wipe each item with a dry kitchen towel (photo in the example).

Dish cleaning properties
We've figured out how to wash dishes. But you have to consider a few important nuances.

What material is the dish?
Kitchen utensils are made of various materials: glass, cast iron, aluminum, etc. They all have their own characteristics, so you need to choose the right cleaning products.
Instructions on how to wash dishes from various materials:

Results

1.If you take into account the general rules of the dishes and the material made, you will quickly and efficiently clean the dirty plates to shine. Further recommendations are provided in the video in this article. Do you have your own secrets, how and what to do the dishes? I invite you to discuss the comments.
A plate of dishwashes accumulates, removing oil and dirt seems to be a real success. Try to simplify your task with a soap sponge rule: wash dishes until the sponge foams. When the team is finished, take a break and do something else. The secret is that the procedure, which is divided into several small steps, is much easier to achieve psychologically.

2. Get beautiful dishwashers
Washing dishes is not the most inspiring job. However, with an old, ugly sponge, you want even less to work in an unattractive environment with an unpleasant chemical odor.
Simply surround yourself with beautiful accessories: soap with your favorite scent, original dispenser or nice brushes - and the possibility of washing dishes will no longer look too scary.

3. And take a pair of rubber gloves.
Stop building Cinderella. Wear rubber gloves that keep your hands dry and protect them from the harmful effects of chemicals and possible damage when washing dishes. You can afford this luxury.

4. Save the detergent
Instead of spraying the tool directly on a sponge, try to dissolve a small amount in a bowl with water and moisten the sponge. This will significantly reduce detergent consumption.
In addition, dishes not related to raw meat, eggs or butter do not need to be washed with soap. Usually only rinsing is sufficient.

5. Use lifeguards to remove complex dirt.
Burnt food at the bottom of the pan or frying pan is a bad dream for any dishwasher. Here are some tips to help you remove impurities easier and faster.
Place empty soiled dishes on the stove and select the maximum temperature. After a while, drip water into the container. If it feels a drop and evaporates instantly, pour a glass of water at room temperature. As soon as the steam is dispersed, rub the pollution in a leisurely manner with a wooden spatula.
Fill the dishes with water, add detergent and boil for 10-20 minutes. After half an hour, when everything is cold, proceed to clean the dirty surface.
Use recommendations.

6. Do not throw trash into the sink.
When a dirty dish in the sink turned into dishwashing mountain, we all encountered the situation. Of course, washing everything at once doesn't always work, so you can use the following technique.
When you have a first and deep enough force for cleaning (eg a pot or a large bowl), fill it with hot water and detergent, place it next to the sink (not inside!) And put other dirty dishes in it.
So, first, keep the sink empty, and second, prepare dishes for quick cleaning. If it gets wet in hot water, it washes faster, then less encouraged to quit, and it is unlikely that the kitchen will turn into Augean stables.

7. Do not wash everything in the dishwasher.
Even if you are the happy owner of a dishwasher, you cannot avoid washing dishes in the traditional way. At least, if you do not want to damage kitchenware and expensive equipment.

List of things that should not be sent to the dishwasher:
Products made of cast iron. They require more thorough care.
Good knives. Sharpen when you wash in the car, not with your hands.
Crystal. It may crack or scratch.
Wooden products can be deformed.
Non-stick coated cooking utensils. Everything varies by brand: some models are dishwasher safe, others not. If you're not sure, it's better to use your old hands. Otherwise, your pans risk losing professional suitability.
Copper dishes. Color may vary.
Plastic. The exceptions are products made of hard plastic, which the manufacturer specifies that they can be washed in the car.
Gilt dishes. The machine may degrade the noble coating.
Labeled dishes. Under the influence of high temperatures, they can become contaminated and clog the dishwasher.

8. Release the dryer and dishwasher in time.
If you need additional work, wash the dirty dishes less: remove the previous assembly and place it. Therefore, before dinner, make sure that there is enough space in the dryer and that the dishwasher is empty.

9. Listen to something nice or fun.
Instead of suffering in the sink, turn on your favorite music, radio or comic podcast mentally to make your next week's to-do list. Time goes by.

10. Meditate
We don't have time to stay. So breathe, relax, and let me think about nothing. Even with dirty dishes. Just wash, wash ...
Do you use any lifeguard to wash dishes? Talk about them in the comments.
Washing dishes - a routine that very few people enjoy, but often inevitable. You have to wash the dishes several times a day: a dish or set, a cup after tea and an oil pan after frying the meat.
If you don't have a dishwasher, you won't even be able to pick up the guests - this is because the amount of dirty dishes increases after their visit.
After dinner, washing is difficult, especially after an active day, and all desires remain only one thing: to rest. This housework doesn't spoil the air much if you learn to wash the dishes quickly. In just a few days you need to remind yourself of new suggestions and soon it will become a habit to do it correctly.
The dishwasher makes life easier, but it is not a panacea. The first and most important rule: do not accumulate dishes during the day. With such an approach to washing time, an amount too large to be immediately overcome will be collected. In addition, the soiled dish on one side of the sink, pots on the other, pots and casseroles in it will disrupt the air every visit to the kitchen. And that doesn't mean that food stays dry and how long it stays, it's harder to take them out later.
It is better to wash dishes as they accumulate. Moreover, it is easy to handle small volumes even when the water is heated for tea or when the soup boils.
All family members should now be accustomed to throwing food off the plates in the trash bin and putting dirty dishes in one place - you don't have to walk around the house to find the missing glass or spoon. Yes, the amount of work will appear immediately when you want to breathe with relief, with almost no unpleasant surprises, but suddenly your eyes on the other end of your kitchen will fall on a forgotten container.
Note: You should not place the plates in a single stack after a meal: in this case the bottom of each one will be dirty, greasy and the bottom plate will be dirty and much more difficult to wash.
Some home care professionals recommend that you buy two sponges, one for lightly soiled dishes and one for greasy dishes. To make it more comfortable, you should choose a sponge of different size or color.

Rubber gloves - This is one of the most important features of dishwashing for some housewives. Indeed, they perfectly protect the skin of the hands from exposure to water, which can dry it and cause premature aging of the skin. However, this feature is not suitable for everyone: some are accustomed to washing dishes with their bare hands and by touch it determines how well the oil is removed from the glass, porcelain or ceramic surface.

Action Procedure
To learn how to wash dishes quickly, as we have said, they should be washed immediately when they become dirty. If this is not possible, dirty dishes should be removed from waste and filled with warm water, preferably if a small amount of detergent has been added. This can be done in a large basin or directly in the kitchen sink after the drain is closed.
If you need to know how to wash dishes, if there is no hot water, the answer is simple: heat the water in the kettle, wash the dishes, then foam, because you can wash the greasy dishes very hard with cold water. And wash already cold running.

Step-by-step instructions and recommendations for washing dishes
You should not wash dishes "incompatible" - it is better to categorize and wash according to the degree of pollution. It usually looks like this:
Glasses and glasses are washed in the first place, because they are rarely very dirty - in most cases, they only need to be treated with sponge and hot water - when you can wash dishes without detergent.
Product cutting boards. If they are cutting raw fruits, vegetables, bread, rinsing is sufficient. Cheese, meat, fish, fried or cooked vegetables - you have to wash.
Cutlery - spoon, fork, knife, spatula. These are small pieces that allow the sink to be released to maneuver more general dishes. You will need to wash here.
The plates. To wash them, you usually have to make some effort.
Containers, bowls, casseroles, pans, trays, other containers. Dirty dishes and the most laborious phase. There is sometimes a need for additional "artillery" - detergents that create a more aggressive effect.
If there is really a lot of dishes, you can wash them in batches, according to the above or using the “sponge principle” - if a soapy sponge is enough, then take a break and wash the next soapy sponge.

Home remedies for quick dishwashing
Store detergents are effective and not too thick, liquid and thick, foaming and practically foam-free. However, each of these means can create doubts about the naturalness of the composition. Since food is then used to prepare and contain food that enters our stomach, some people prefer to use only familiar methods to wash it.

What could it be:
salt - perfectly helpful when slag needs to be cleaned from the bottom of the pan. Half a glass of salt is poured onto the dishes, spread in a homogeneous layer and after a few hours the product is easily washed off the plate. It is better to wash the cast iron dishes immediately from the outside, using salt as a scouring powder - the cast iron gives heat for a long time because the pan gets hot for a while after being removed from the heat and is easier to clean. This method should not be used for cleaning glassware and products with an easily scratched surface, as salt is corrosive;
soda and vinegar - the perfect combination if you need to clean aluminum dishes at home. Soda removes dirt and reacts with vinegar and penetrates deeper into the bowl - the effectiveness of this cleaning increases. Unlike other methods, the combination of soda and vinegar does not harm aluminum and does not cause metal turbidity. However, such a mixture cannot be used in non-stick coated products;
soda ash - diluted with water at the rate of 1 tbsp: 1 liter of water. l. soda;
mustard powder - cleans good dishes from oil and other contaminants, but when used on glass and other “sensitive” substances, mustard must be diluted with water in a liquid slurry to prevent scratching the surface. It can be mixed with vinegar such as soda, this combination can be used for cleaning non-stick or teflon coatings;
citric acid - perfectly removes impurities from water heaters and pans;
activated charcoal is particularly effective in burnt milk. Several charcoal tablets are crushed, poured into plates and poured with a small amount of water. After 15-30 minutes, soots in the milk (both yellowing and more stained blackness) easily move away from the surface of the food;
laundry soap - normal lumpy soap with a fatty acid content of 65% or 72%. If you rub on a fine grater and dilute slightly with water until it becomes paste, it is more convenient to use;
ash - literally a walking option. It perfectly cleanses ash, soot and other pollutants, because such a vehicle is actively used for washing dishes on camping trips, picnics, mostly grass. This method is also suitable for private homes, home owners.


18Axx
Antimicrobial Sponge Set of 4, Non-Abrasive Scouring Pad w/ Fading Monogram, Antibacterial Sponge Replacement Tech. Modern Kitchen Sponges w/ Smell Resistant & Bacteria Resistant Polyurethane Foam

Scotch-Brite Scrub Dots Non-Scratch Scrub Sponge, 6 Sponges Total

How to properly care for enamel. How to bring the enamel back in the pan

Under a thin layer of enamel, steel or cast iron is hidden. Cast iron pots are heavier and more expensive. However, they heat evenly, keep the heat longer and are more suitable for quenching. Steel enamel pans heat up irregularly, so it is better to cook only liquid dishes. An important nuance! High temperature steel may deform. To avoid this, choose pans with thick walls - 1.5 mm and more.

Carefully examine the pan. No chips. The handles may also be made of enameled steel and welded to the pan. And maybe steel and wood. You're not going to burn yourself, but over time, the detections will loosen.

Glass lids are useful because there is usually a hole for steam. Note, however, that over time, it may rust, just like a screw holding a handle. Maintenance of such covers should be more careful. Dry after washing. Finally, the color of the enamel. A new, bright, whitening container weakly absorbs heat. Therefore, choose dishes with a dark enamel or specially darkened bottom.

Technologies for construction and finishing works

Homemade ways to recover enamel

How to restore the enamel bath

What to do and what to do if a small piece of enamel is broken in your bathroom? Most likely, the craftsmen will not be able to do the repair work, the amount of work is very small and will take very little money from you and it will be expensive to update the bathroom completely!

At home, it is not possible to make a factory-like coating, because enamel is a burning coating that turns into a glassy substance at a temperature of 800-900 degrees. Other coatings used when updating the enamel layer represent paint with enhanced mechanical strength and water resistance. According to experts, such coatings are not durable: they are destroyed by cleaning and detergents.

Sprayed or cracked enamel bath can be restored in the following ways:

We clean the damaged surface of the sandpaper, then dry the surface by washing with gasoline. Then we adjust the BF-2 glue layer to the crack and add a little dry white. We distribute this mass evenly to the damaged area with a brush. After the layer has dried, we repeat this process. Repeat this process until the glue thickness reaches the same level as the solid enamel surface.

We prepare pasta from 1: 2 filler and epoxy resin (such a resin is sold in a hardware store or on the market). Mix the dough thoroughly and let stand for a few days to make it homogeneous. First, dry the injured area in the bath after degreasing with acetone or gasoline. Mix the putty with the hardener (complete with epoxy resin), the resulting mixture is applied to damaged areas. Align the surface with a knife. The mixture hardens completely after 6-10 days, during which the use of a bath is prohibited. The service life of such a patch is 3 to 8 years.

A heavily damaged bathroom will help renew the white nitro enamel and Super Cement glue. The mixture should be in the same proportions by weight of this mass. The bath should be degreased with acetone or gasoline before it starts to shine on the cracks. Before leveling, we rub the coating onto the surface in a thick layer.

Enamel coating restoration technology in bathrooms, sinks and dishes without special equipment

Paste for enamel surfaces: kaolin 225 g, small ground 60 g, burnt 40 g boiled powder, 30 g powder sodium silicate, 20 g powder glass, 20 g quenched lime, water 50-125 ml.

After thoroughly mixing these substances, a homogeneous mass is formed in the porcelain plate. The cracked enamel surface is cleaned, degreased and rubbed with a paste. Drying lasts 48 hours.

A paste is prepared to smooth out the deterioration points in an enamel vessel: 13 parts casein, 4 parts quicklime, 10 parts soda ash, 6 parts sodium silicate, 15 parts ground quartz, 5 parts ground glass, 50 parts kaolin.

The paste is moistened with water before use and the casein stops until it combines with alkalis. Then dilute the paste to the batter consistency, stain the rust and oil where it should be removed beforehand and allow to dry.

In the home, bathroom repair often consists of lubricating the enamel chip areas with a filler with a composition prepared from epoxy resin. The filler is titanium white powder, talc or dry enamel powder. Approximately a portion (by volume) of the fill is taken for both parts of the fill. After mixing, the resulting composition ages for about 10 days, then becomes homogeneous.

The degraded area is degreased and degreased with gasoline or acetone coated with the epoxy composition. The composition is applied at the latest 20-30 minutes after mixing with a hardener at a ratio of 1:10 and smoothed with a razor blade or spatula.

Full curing of the composition takes place within 7-10 days. The nodules are then ground with a fine-grained sandpaper.

This method is suitable for both partial and full enamel baths.

Supertement glue and white nitro enamel will help you regain the enamel of the bathroom. Mix weights evenly and apply paint glue with a pad in the right place. After the bath is dried daily, reapply the solution to the surface. So repeat 4 times.

Glue 4 tubes consumption (40 g each), 160 g dyes

Restoration of a uniform shiny surface and uniform color coating on toilets, drainage tanks, bathtubs and sinks by eliminating micro-cracks on absorbent surfaces

a). The surface of the toilet bowl, sink or bathroom that you want to smooth should be washed and dried thoroughly to remove any cracks that are smooth, shiny and resulting.

b). Then degrease with solvent or acetone.

c). Then dry again for 2-3 hours.

g) was added. Collect the desired color tone enamel (preferably the nitro enamel used to paint the carriages) and apply lightly with a brush to a dry surface.

ARTIFICIAL ENAMELED. If the enamel is broken from the toilet, sink or tub, it can be restored using BF-2 glue and dry zinc white. The whitewash is mixed with glue into a thick slurry.
Enamel restoration.

The damaged area is cleaned of dirt and rust, dried with a clean cloth, washed with gasoline and dried. The prepared mixture is then applied with a three to four coat brush and allows each coat to dry for about one and a half hours.

Repair the enamel bath

The old bathroom with a perfumed enamel can return to its old clean appearance. First, the surface is well lubricated with acetone (or solvent No. 646 or 647). Then pour a little white nitrokraska in a clean bath and carefully rub. This is done several times until the pores in the enamel are filled. Excess dye is removed with a cloth moistened with a solvent. The resulting nitro-enamel layer is applied from an aerosol can.

Bathroom enamel restoration

It is possible to restore the bath enamel in this way: adhesive The superior and white nitroenamel is mixed in equal proportions by weight. The bath is degreased with gasoline and then with a cloth to rub a thick glue with paint. Leave to dry one day and apply another coat. So repeat four times. Approximate glue consumption: 4 tubes (40 g each), 160 g paint, Coating white, flat and strong enough.

Descaling

Heated vinegar can clean the surface of the bath or increase in scale.

Dish, sink, bathroom and so on. Recipe tablets for cleaning and washing

Take: 1.200 g of borax, 400 g of tartaric acid, 150 g of baking powder, 1.7 g of lavender oil Add water and mix thoroughly until all the ingredients get a thick paste, then roll on the table and cut into pieces into tablets.
Craftsmen's tips: How to fix an enamel pan?

How to fix the enamel pan

With such a question, the reader turned to the editors.

Personally, I prefer stainless steel cookware. And it is easy to clean and looks good and durable on the shelves - such grandchildren remain, and after repair, you can not remember it. Truth is more expensive than enamel. However, if the reader needs repair, we will begin.

Identify immediately: rusted pans between large areas, it is better to switch to scrap metal. If a layer of internal (black) enamel has appeared, nothing needs to be done - it's a bit ugly, but the pan is still working. Don't fall for advertising of various boxes with so-called enamel! This prevents the solvents from becoming noticeable in food after painting and enamelling for a long time, not enamel, but what do we need?

However, these favorite containers, bowls or mugs (but not more than a few millimeters) to which metal is exposed or passing through a hole. It is possible to extend the service life. The road is old, well known and simple - tin plating.

All you need is to find a tin from friends, buy it or ask. Please note: it does not only contain tin and pollution. Under no circumstances should you use solder for soldering, as they all contain lead - a poison that can accumulate in our body. With the exception of silver or gold, there is no substitute for tin in the food coating.

It will take more "storms" (in powder form), now you can buy anywhere and easily in small bags.

The main tool used for repair - burner on a gas container. Of course, you can use a strong soldering iron, but in my experience, I know that they should still be able to work during the tinning process.

First, you must remove all bare metal stains from the cake. Special attention should be paid to the edges - cleaning the enamel surface is better than leaving no rust.

The second step is degreasing. Pour soda ash on a clean cloth and drip water to lightly moisten the entire powder layer. And with this dust, wipe the location of the future tinning and the surrounding area several times. Under no circumstances should you try to control the quality of the stripping and degreasing with your fingers, as tin cannot be removed. In general, all procedures - from degreasing and peeling off under running water - to washing - should be performed on rubber “surgical” gloves. And you will benefit twice as much: a caustic substance will not fall into your hands and the repair site will be clean and ready to be completely tinned.

Now you can fix it. Pour borax powder with a thin layer on the prepared surface. Then, heat the repair zone in circles starting from the peripherals (at the edges) and toward the center. Caution: When the storm begins to melt and smoke emerges, this means that the ground is warming to the correct temperature. Take a can of tin with tweezers and put the tin into place. Continue heating until the tin does not spread throughout the plane. Examine the study carefully, you can even use a magnifying glass to identify non-zaludilis areas. In such a case, repeat all operations first - and you will succeed.

In addition to polished furniture, mirrors, lampshades, window glass are easily electrified, attracting dust. To avoid this, wipe the surface with a shampoo composition containing any antistatic agent and water, taken in a 4: 1: 8 ratio (by volume).

In the repair and construction of furniture, wood should generally be given one or another color (usually with the help of stains), after which the painted surface is varnished.

Before painting, the surface is polished with fine-grained sandpaper and the wood dust is cleaned with a brush. The cross-cut saw is slightly moistened before painting. The stain is applied with a brush without a metal ring. If necessary, the treatment of the stain is repeated with the surface wet.

The dried, painted surface is covered with lacquer or varnish, which is applied with a brush or roller linen cloth wrapped with sheep wool or foam rubber.

When the coating dries, the surface is re-polished with fine-grained sandpaper and varnished two or three times.

Heat the last one on a plate with hot water (be sure to remove the plate from the heat), covering the surface in a flat, thin layer.

FOR CHANNELS

If the enamel pan is worn, it is not difficult to repair. The hole can be easily soldered with the tin, but it is necessary to use a certain amount of space through the enamel hole to clean it thoroughly.

sanding paper with late edges, any solvent (acetone, turpentine, solvent 646 or 649, etc.) and degrease with solder. But! The main drawback of this method is the need for enamel splitting around the hole and the impossibility of completing it, which is 100% tinning of the metal surface around the hole. Likewise, the uncoated edge remains where the metal will continue to corrode further.

Without less loss and soldering iron (the latter is not always in hand and everyone knows how to use it, tin, rosin, ammonia, etched hydrochloric acid are not always at hand), so to say, repairable, dry, riveting hole with the appropriate diameter aluminum wire.

If this is done slowly and carefully, the rivet head may be formed such that it closes around the bent hole from the enamel surface. In this way, non-enamel containers do not even make repairs.

Many housewives have a problem: how and how to clean aluminum containers?

First, let's say that aluminum is covered with a very strong Al2O3 oxide film. this protects the metal from further oxidation. But likewise, it is better to use aluminum pans only for the preparation of non-sour and salt-free foods (potatoes, various cereals, pastas). If you have cooked sour or lonely food in an aluminum pan that is forbidden to cook, then pour it into enamel, glass or earthenware containers. By doing so, you recover the film that begins to disintegrate (the film is then restored under the influence of atmospheric oxygen and water). For the same reason .

17Axx
Scotch-Brite Scrub Dots Non-Scratch Scrub Sponge, 6 Sponges Total

Skoy Scrub (2-Pack)

How to clean the old oil from the dishes and kitchen accessories

Cooking in the kitchen is always accompanied by oil splashes. Oil-containing vapor condenses on walls and furniture surfaces, dust is poured on it.

Over time, a thin invisible layer is now becoming very thin and unnoticeable. The question is, how to clean the kitchen from oil?

Even a fresh stain cannot be removed without the help of detergents. What kind of degreaser is effective in the kitchen?

Different tips come to your rescue. Apparently there are many ways. Nice, different, affordable.

If the pollution is not strong, you can separate your hands and leave the household chemicals. Baking soda and laundry soap will remove stains and stains. When these simple components are no longer effective, it is time to take radical measures.

Think carefully about what will remove the oils in the kitchen and what is necessary for this.

Soft rags;
sponge,
Rubber gloves;
Detergents and cleaners.

Select the following cleaning options:

Household chemicals;
Available tools;
Steam cleaning.

Household chemicals

Cleaning with household chemicals is the fastest and most used method.

There is definitely a way to remove fat in the kitchen, for example:

Schumann,
Silith Bang,
Mr. Muscle
Santry
Sanita ...

Great variety of choice. A wide variety of manufacturers. There are also liquids that perfectly dissolve oils and clean clogged surfaces to wash ovens.

All effective, you just need to choose the appropriate option.

One of the options of how the kitchen can be degreased:

Wash the area of ​​contamination with warm water;
Apply detergent;
Wait for a while (until the plate is dissolved);
Whisk with a sponge, place a brush, a sponge with a metal sponge;
Remove residual cleaning agent from the surface;
Rinse with a damp sponge to the required purity;
Repeat if necessary.

However, you must clearly distinguish what a cleaning tool is for metal, glass, tiles and furniture. Each package is accompanied by instructions and must be strictly followed.

MDF-based facades can be washed with abrasive and chlorine-free cleaning agents, complete with plastic or film. It is better to use washing components for furniture. It is recommended to clean a small amount dissolved in water with a neutral detergent solution.

Warning! Be sure to wear gloves because strong detergents are toxic.

Treasure your hands, do not neglect safety while working with chemistry. If you have allergies or bronchial disease, it is better to avoid using aggressive agents.

NOTE! After this event, it is recommended that you ventilate the room.

Available at hand

How do you remove the oil from the kitchen or how do you remove the oil from the kitchen furniture in the easiest way? It is cleaning with soap and baking soda.

This is important! Soda should not be dissolved completely! It must remain in powder form and act as abrasive to “clean” particles and dirt.

The surface is first washed with warm, soapy water. Then add soda and rub with a sponge. When the oil runs out, simply remove the residue.

This method is suitable for washing metal surfaces and tiles. You can replace laundry soap with dishwashing detergent, which dissolves the oil. Baking soda is a water-soluble, slightly abrasive.

This is important! It cannot be used to clean kitchen furniture with glossy, enamel, polished soda! Scrape the surface.

How to remove kitchen furniture from oil - another method.

Take soda and vegetable oil in a 2: 1 ratio;
mix until creamy oats are crushed and apply to dirty areas with a sponge (you can use a brush);
rub well;
you will only need to wipe the surfaces with a damp cloth.

Attention! It is best to put the paper under the surface to be cleaned. Soda and oil slices will drop during the cleaning process.

You can use liquid ammonia diluted in water. 1 tablespoon. liquid ammonia 11 l. water. Pour water into the sprinkler, apply impurity. After a few minutes, rub with a sponge or brush.

It should be noted that vinegar, dry mustard, vinegar are also good, natural oil solvents. In the absence of other means, they can perfectly clean the surface.

Steam Cleaner - Reliable Assistant

Removing old oils from kitchen surfaces is perhaps the most time consuming cleaning part. When stains are still fresh and easily washed, they do not appear on the headset or on the desktop. The oil must freeze - and it can be seen very clearly already, but it is badly washable. Fortunately, it lends to various professional and public cleaning products for kitchen surfaces. How is the oil in the kitchen washed with headphone panels, tiles and counter tops?

set

As a rule, kitchen furniture facade panels are made of veneer, plastic or PVC film coating. These materials are resistant to moisture, scratches, impacts, shavings, temperature effects. And most importantly, they can be cleaned with traditional household chemicals, including those with abrasive properties.

Before removing old oil stains, the panel should be wiped with a sponge dipped in hot water. This is necessary to make the contaminant smoother and easier to remove from the surface. After 5-10 minutes, you can start cleaning using one of the following tools.

Mustard powder . Mustard is perfectly suited for cleaning oils and oils not only for the kitchen but also for stoves, sinks, refrigerators, pots and pans. However, it is not desirable to process only a series of wood. To remove the mustard oil, apply it to the contaminated areas and rub it with a dry cloth. Mustard residue is removed with a cloth or sponge.
Soda and laundry soap . In turn, these universal tools work better than one at a time. Soap acts as an oil solvent, soda acts as an abrasive. Spread the soap on a coarse grater, cover with water until a cloudy solution is obtained, and wipe dirty areas with it. Pour baking powder on top, rub a little and leave for 20 minutes. Clean with a sponge after washing. The method is also suitable for metal surfaces.
Soda and sunflower oil . The second component will help wash the oil better than soap. To prepare the cleaning solution, dilute the oil with 2: 1 soda. Take a consistency composition of sour cream. Apply to the oil stains with a sponge or apply better with a soft brush and wait 15 minutes. After removal of residues from the panels, wipe them with a damp cloth.
ammonia Dissolve one tablespoon of ammonia in one liter of water, pour into a spray bottle and spray on dirty surfaces. Leave the mixture briefly to dissolve the oil, open the glass, so that it does not suffer from a certain odor. Then remove the solution with a damp cloth.
Alcohol and Vinegar . Alcohol is a universal degreaser with a sterilizing effect. Mix two parts of water and one part of vinegar and alcohol. If desired, add 10 drops of essential oil for flavor. Place the mixture in a spray bottle, spray on the surface of the headset and leave for 15 minutes. The oil dissolves and can be easily removed with a damp sponge and releases a pleasant aroma in the kitchen.

tile

Tiles in the kitchen, especially if decorative, require careful care. It cannot be cleaned with metal brushes and sponges, as it may damage the surface. For flooring, they produce special scrapers and household chemicals that allow you to maintain brightness. In the case of expensive tiles, it is better to clean with compositions for ceramic coatings. For example, Shumanit, Sanita, Mr. Muskul and others.

Tiles can be cleaned with old oil steam generator . First, heat the dirty areas with hot steam and then wipe them with a wet cloth or sponge. This method does not require the use of household chemicals.

Another effective tool for a smooth surface - melamine sponge . It acts like an eraser, adheres well to dirt and gently cleanses. It is only necessary to moisten the tile to lightly wet the oil stain, wet the sponge and scrub the contaminated areas.

How can you wash the oil in the kitchen with such a delicate surface? Suitable for non-corrosive folk remedies:

Laundry soap. Foam with sponge and walk on dirty surfaces.
Vegetable oil Apply to contaminated areas for several minutes and wash with sponge.
Mustard powder. Highly sensitive abrasive suitable for tile. Melt in a paste or use mustard, put on tile, leave for 10 minutes and then clean with a damp sponge;
Alcohol. Moisten them with oily dirt, rub and wash immediately with water.

Solid wood

The wooden surfaces of the kitchen set require the most precise handling, otherwise the color or texture will be damaged. Kitchen furniture from solid wood is cleaned with the best special tools for the maintenance of wooden surfaces. The folk remedies fit the following.

Raw potatoes . The tuber is cut in half and rubbed with half of the dirty floor, then the scar is cleaned with a wet cloth. This method is very time-consuming and only suitable for small impurities, but can be used on polished surfaces.

Pharmaceutical Talc . Wet sponge sprinkled with powder, rubbed dirty areas. The residue is cleaned with a dry cloth. The method is suitable for precision polished panels.


Cleaning is not always enjoyable, especially if the hostess is confronted with the question of how to remove oil from the kitchen. The surfaces of tables, cupboards and cookers quickly become dirty and accumulate cooking marks on themselves and it is not that easy to get rid of them. To make the task easier, you need to understand how and what to wash the oil from the kitchen furniture, so it's quick and efficient.

Modern housewives have the opportunity to choose from a wide range of products offered in stores. However, they are increasingly returning to old and proven public cleaning methods, using the effective tools available.

The first and foremost rule that the kitchen should always be cleaned and bright is that it should be cleaned regularly. So, since you don't have to figure out how to wash old fats in the kitchen, it's better not to start them up, and get rid of them if they get dirty. Among the other main recommendations, the most useful ones are:

By starting cleaning, you need to understand which materials are composed of surfaces to be washed. Different detergents are suitable for different parts of the kitchen and furniture.
You should read and follow the instructions for use before using the store cleaning agent.
Compositions made from improvised cleaning products, it is better to first try a small area of ​​the kitchen surface and then wash everything.
Detergent preparations and mixtures should be washed thoroughly with clean water and then dry the surface to avoid stains.

The kitchen is the face of a housewife. We meet guests, work or study, have a full breakfast and spend a lot of time. Therefore, the cleanliness of the kitchen room is a burning issue that annoys all housewives. Unfortunately, the crazy rhythm of our lives, as in kitchen furniture, does not give you a temporary opportunity to be careful, and this should be done every day. We apply cleaning only when the oily coating becomes noticeably clear. By answering the question of how to clean the kitchen oil, two ways are worth thinking - folk and chemical. We will apply them to the kitchen set, the stove, the hood and the tile. To do this, you need to know which surface and what you can remove to avoid damaging it in the form of scratches or whitish tones.
How to clean the kitchen oil set

The closest objects to the hob surface are kitchen cabinets, so the oil stains on them are not uncommon. Usually, when cooking, the hot oil simply splashes, splashing around, leaving an unpleasant yellow patina, which becomes difficult to fully dry and secrete within a few hours. Think about what you can use to wash the oil in the kitchen cabinets without damaging the surface.

The most important rule - Do not use fibers with abrasive surfaces and cleaning products containing the same abrasive.

By selecting the "assistant" tools, it is necessary to create the type of surface on which the contamination will be removed. Kitchen furniture made of:

DSP (laminated or conventional) - has a high resistance to moisture;
DVP - subject to mechanical damage;
MDF - resistant to more damage than chipboard;
lacquered solid wood - does not increase humidity;
Multilayer wood is a highly durable material that is not afraid of moisture.

The next indication is the lacquer coating of the facades. Often, this technology is used for a beautiful aesthetic appearance, but it is more laborious compared to traditional chipboard. If you use a chemical substance, it should be noted that its composition should not contain alcohol-containing components. Bright, lacquered furniture should not be washed with a damp cloth. The cleaning process should look like this:

Duster removes dust.
Wipe a flannel piece and surface wetted in turpentine or engine oil.
After 30 minutes, dry with a soft cloth to make the furniture shine.
Another method is the application of burdock oil. This product easily dissolves even old oils.

However, due to carelessness, if it was possible to apply scratches to the furniture surface, you can get rid of them: mix red wine and motor oil in equal proportions, rubbing in a circular motion over the scratched area. It is necessary to wait until the mixture is absorbed, then wipe this area with a dry cloth.

Then consider how to wash oils from chipboard, chipboard and kitchen furniture made of MDF. Such a facade is also subject to mechanical damage. Therefore, the selection of vehicles for oil cleaning should take full responsibility. First, the product should not contain abrasives, second - cleaning is done in a kitchen where you can heal easily, to be safe for use. First, we turn to the products of the chemical industry. To do this, you can use the following tools: Mellerud, Caterdean spray, Azelit, Erazer water-based, Cosmofen and others: This is one of the safest kitchen assistants in the fight against oil deposits. Kitchen folk remedies wash kitchen oils, it can be:

A thick soap solution. Rub the brown soap bar and dilute with water to a creamy mass. Apply to the desired plane and leave to be affected for 1 hour. Then wash with warm water.
Soap and soda Very effective medicine that cures even with old oil. The duration of action depends on how old the pollution is - 1 to 3 hours. This method is not suitable for glossy surfaces.
Mustard powder should be diluted with plain water to form a thick slurry. It should be applied to dirty areas containing soft rags. After 30 minutes, remove with a cloth dipped in warm water.
Detergent, vinegar and soda. In this folk remedy, emphasis is based on the effects of soda and vinegar, and the detergent acts as the fixator of the effect. It is very important not to rub with effort and not to use coarse fibers. Even a distress like old-fashioned oil is a problem that can be easily removed.
Vegetable oil and soda. For such a composition, we combine the ingredients in equal proportions and apply them to the kitchen surface with a soft sponge. It is important to note that the movement should be from top to bottom, but not in a chaotic manner - although it may seem more laborious, it is much more efficient. But the outcome of the process will come faster and ultimately save both time and effort.
There is another way to remove oils from the kitchen set, which is suitable for all types of surfaces - this is a steam cleaner. The happy owners of this appliance have long been free of all chemicals, because this technology miracle can get rid of any contamination, whether old oil or burnt dirt in the stove. It's ridiculous to even wash the windows. In addition, the cleaning process itself takes several minutes.

We fill the steam cleaner with plain water or the addition of vinegar to get rid of dust mites, and steer the steam down the top of the kitchen furniture, staying a little longer in the more polluted places. After steam treatment, only dry the headphones. We do this with a polish for a brilliant effect and less dust build-up.

You can't get over the attention and the stove he's always been trying to disrupt. We cook, fry, casserole, and various deposits are formed during this process - water escapes from the pan, oil is sprayed on the entire cooking surface, and so on. Since the stove remains hot, it is not always possible to fix it all. Although cleaning experts recommend to “sweep sıcak hot marks, you do not need to make any special efforts, just wipe them with a damp cloth and cleaning will continue. However, if you cannot remove it in time, you should use these methods to clean the stove:

Unicum GOLD PROFESSIONAL is a professional tool. Coping with business almost instantly. To do this, we must apply grease to the required cleaning plane and wait 15-20 seconds. Then wipe with a damp cloth. Especially for resistant oil, scale or soot types, the time should be increased to 1 minute. This oil remover is suitable for cleaning ovens, stoves, pots and pans. All kinds of kitchen furniture can be processed using Unicum.
We process the stove with 9% vinegar. To do this, moisten the sponge easily and carefully rinse the entire cooking surface, including the glass kitchen apron. After that, sprinkle with soda water and apply into it, special attention is paid to the burners where burned dirt accumulates most frequently. After performing this procedure, wash the residue of the mixture with a wet towel.
Mustard powder is also suitable for fighting oil in the furnace. To do this sprinkle a damp cooking surface. Visually, it will be possible to observe the process of forming mustard balls that absorb the oils into their compositions. They are then easy to wipe off with a dry cloth after they are wet.

It is not possible to keep attention on the regulators of the plate. Well, if this is a removable option, it will take a little longer. It is very convenient to wash with an old toothbrush. No washing or cleaning means. To do this, handle yourself with a brush, soak in the cleaning solution, pull the regulator towards you, clean it from the bottom, then go to the handle and the ring around it. After manipulations, the vehicle remains must be removed with a damp cloth.
The whole kitchen plumbing is wiped with vinegar. The same car can get rid of oil in the sink.

Soft corners made of leather or leather, which are not uncommon in the kitchen. On such a smooth surface, traces of oil are very easily formed by both hands and the nearby stove. Removing such unpleasant pollution will help a special drug based on gasoline Leder Reinigungsbenzine. Of course, it has an unpleasant odor of flammable material, but the result exceeds all expectations. You can buy such a tool at a store that sells products for the care of leather goods. The procedure is recommended in a well-ventilated area.

The kitchen hood is the largest fat battery in the entire kitchen. In principle, this is the direct purpose. When choosing this kitchen equipment, you must pay attention to its size. It should be compared with the dimensions of the plate. The size of the hood must be 1/3 larger than the cooking surface.

Let's look at the methods of cleaning the hood itself. For this, it must be removed. Initially, we removed the metal body and removed the cleaning filter. Think about how to remove the filter kitchen door from the oil. There are many chemicals in the oil trap that can handle dirt within 15 minutes. For example, Amway LOC or Sodosan Responsive. Both products are organic based. The working principle is the same: Apply the product to the filter with a brush and leave for 15 minutes, then rinse under running water. Such an easy way is also suitable for cleaning the elements of the hood.

Based on popular methods, we continue:

We buy plates of this size to fit into an oil trap. Pour water there and boil.
Fall asleep with 100 g of soda and lower the filter, remove within 3-5 minutes. It is not possible to find plates of large size, such as a rectangular filter, so the procedure is first performed in one half, then in the same boiling water, the filter must be rotated to clean the second side. To avoid troublesome activities such as getting rid of oil deposits, it is worth taking care to prevent. To do this, you have to wipe the kitchen surface and cooking plate of both headsets daily.

Many folk remedies can handle oil stains and dirt on headphones, tables, chairs, cabinets, countertops, and other kitchen furniture better than industrial chemicals. These cleaning products, which can be prepared at home, not only wash oils from kitchen appliances, they also save time and money.

If you compare household chemicals sold in stores with folk remedies, the latter is safer for people and can be very helpful in combating dirt in the kitchen.

Before removing oils from the surfaces of kitchen furniture, you must select the appropriate equipment for cleaning. You should choose a softer instrument - sponge, soft cloth, microfiber, cloth, flannel. Any of the materials will be able to wash the oils in the kitchen furniture perfectly. Do not use metal brushes: using such tools may cause scratches and other damage to the furniture.

Damaged furniture becomes dirty much faster: scratches become clogged with oil, flowering and dirt.

Rubber gloves should be used for hand and nail safety for cleaning the kitchen.

Before the furniture is completely soiled, you should check the quality of the product on the headset in a small, inconspicuous area. Such a measure will protect the furniture against damage.

Various cleaning products

You can use the various tools available in each kitchen. Choose a special tool that includes the type of stain you want to clean and the type of furniture.

Soda in the fight against stain

A simple way to clean furniture is to use baking soda. It can wash glass surfaces: dishes, tips on headphones. Cleans plastic parts in the kitchen (refrigerator doors, household appliances). The soiling zone must be wetted and wiped with soda. Rinse the residue with a damp cloth.

Soda can clean the soft seats in the kitchen.

You must first moisten the seat with water. Then pour plenty of greasy stains with soda and start scrubbing. Soda is left in the furniture for 15-20 minutes after leaving. Then collect the dust with a vacuum cleaner.

If the stain remains, you can try to dilute one tablespoon of vinegar with one tablespoon of vinegar in 250 ml of water. The instrument is applied to microfiber stains. Wipe the seat with a clean, damp sponge.

Laundry soap and soda

Both soap and soda are effective in combating oil on furniture surfaces. Both components and separately can cope with pollution, but they allow them to achieve the desired result together.

To prepare the detergent from soap, it is necessary to apply it on a coarse grater in a deep bowl. Add warm water to the soap dispensers. The solution should be cloudy. The resulting product should be applied to dirty areas with sponge. Although the solution does not dry, a small amount of baking soda and treated problem areas should be applied. The consistency is washed twenty minutes after application.

Soda in this solution is an abrasive to help wash the contaminated areas thoroughly.

Soda soap solution is perfect for metal and plastic surfaces. It should not be applied to glossy and varnish coatings, as scratches may occur after cleaning.

It is important to remember that the soap should have a dark brown color. If the soap is bleached and has a smell, it cannot cope with the pollution in the kitchen.

Vinegar Furniture Cleaning

It fights well with oil vinegar, you can use apple cider vinegar. In addition to furniture, countertops and tiles in the kitchen, you can make descaling and descaling from metal and ceramic products and get rid of lime in teapots.

Add a little water to the vinegar. Apply the resulting solution with a cloth to grease stains and wait until the grease comes off the surface. Then wipe the headset with a damp, soft cloth.

Baking soda for oil stains

Quickly set kitchen baking soda will help.

It is necessary to prepare a slurry of baking soda and water. Tools are applied on a dirty surface and waited for half an hour. Then washed with water.

Alcohol against oil plate

Oil stains show excellent alcohol or vodka. The tool washes well modular furniture and ordinary headphones with a glossy finish. Before processing furniture, you must open the window in the kitchen.

To make a remedy, you must dilute one tablespoon of alcohol in one liter of water. You can use it to clean the sponge, cloth and spray bottle. With the help of improvisation, you can process the kitchen furniture and leave it to be cleaned for half an hour. Remove the solution may be a normal damp cloth.

Very suitable for fighting pollution and vodka. In this case, you can easily moisten the sponge with vodka, wipe the oily surface and then rinse with water.

Disinfection and cleaning with alcohol and vinegar

Excellent tool that not only fights against oil and dirt but also disinfects furniture from bacteria and germs.

To prepare the solution, stir table vinegar, alcohol and vodka in a 2: 1: 1 ratio. You can add a third portion of a teaspoon of any essential oil to the mixture.

The resulting mixture should be used to remove dirt with a spray. The solution should remain in contaminated areas for 10 to 15 minutes. Then wash the solution with a cloth or sponge. It emits the aroma of essential oil after applying such a mixture from furniture.

Essential oils for cleansing and pleasant odor

Perfectly handle the task of cleaning furniture essential oils with other components.

You will need essential spruce or eucalyptus oil to get rid of the unpleasant odor and to effectively treat wooden surfaces. It should be in a water container, add a few drops of oil, and then wipe the wooden surface clean with a sponge.

You can mix orange and eucalyptus oil with vinegar and vodka. You should get half a glass of vodka, half a glass of vinegar, half a teaspoon of orange oil and a few drops of eucalyptus essential oil. Mix the solution well and pour into the spray bottle. That means put greasy stains for 20 minutes. After washing with a damp cloth.

Such a recipe helps to calcify not only on wooden surfaces but also on metal surfaces and contaminates plastic and ceramic parts.

Lemon as a detergent

Effectively and safely combat fatty lemon slice. In addition to headphones and other surfaces, you can clean the lemon plates and remove limescale and descaling agents.

For fruit juice to flow from the surface, furniture must be wiped with lemon. After ten minutes, the headset can be washed with warm water and wiped with a paper towel.
Citric acid from all types of contamination

A citric acid solution - the perfect solution for furniture impurities. The preparation of the solution requires one liter of water, 15 grams of citric acid and some detergent. Liquid should be applied to problem areas and then wipe with a damp cloth.

It can be used to clean lime deposits on acid metal and ceramic surfaces.
Vegetable oil and soda for all types of earphones

If you use a product made of vegetable oil and soda, the furniture will be clean.

The tool is perfect for washing wooden surfaces, sets and furniture from MDF and solid wood, cutlery, tables, chairs, shelves, doors, frames and dishes.

The holder should be cooked in a consistency similar to sour cream. To do this, take vegetable oil and soda in a 2: 1 ratio. Apply to oily stains and treat with a soft brush. Leave the shiny surface for half an hour. Then remove some oil. You may need to reprocess the headset, for the first time an oily surface may not come off the surface.

By applying a brush and oil brush to clean the kitchen, you can achieve brilliant cleaning and protect furniture from high humidity in the kitchen or dry at high temperatures.

This mixture should be applied every two weeks.

Clay and vinegar mix

The stains in the kitchen completely clean the tool made of clay and vinegar. The tool is suitable for wood and solid wood, floors, walls, tile surfaces and containers.

To get a mass for cleaning, you need to add a little vinegar to the bushel. The tool is applied to the sponge and wipes the surface of the headset. After the process, wash the surface with water.

The clay in the detergent acts as an abrasive. You should choose stone-free clay as they can destroy furniture during cleaning.
Mustard powder for kitchen furniture

The product is suitable for cleaning surfaces without contamination.

Mustard oil dissolves well, so dirt and oil after washing will remain on the napkin.

Moisten with water and sprinkle mustard powder to clean the dirt and oil surface. Then wipe the furniture with a dry cloth. When the mustard powder is completely removed, a damp cloth or sponge helps.

Mustard protective sets, stoves, sinks, refrigerators and kitchen sets can be cleaned. Do not use dust for wood surfaces and MDF sets.

Salt against stains

Salt is great for cleaning wood surfaces. Effectively removes oily deposits, prevents germs and bacteria from spreading.

To clean it, it must be wiped with salt and grease containing dirt and oil.

Once a week, you can use salt solution to treat facades and worktops.

Dishwashing Detergent

Ordinary dishwashing detergent can also be used to clean tiles in the kitchen, household appliances, kitchen sets and other furniture. It is sufficient to dilute part of the product with water and take a foam. Treat all dirty surfaces with it. It is recommended to wipe hard stains and old oil with the abrasive side of the sponge.

This tool can be used after each cooking.
Result

There are many cleaning products for kitchenware, furniture, dishes, cutlery, various surfaces, floors and walls. They all contain chemicals that can do great harm to the human body. Many people are exposed to allergic reactions, having difficulty breathing during the use of such funds. Therefore, the advice comes from mothers and grandmothers who use folk remedies to combat oily raids on various kitchen surfaces. In addition to these tools, they also clean production tools. It is necessary to take safety precautions when working with one or another cleaner in the kitchen. Gloves should be worn, the kitchen should be ventilated during and after cleaning, and children and animals should not be allowed to come into contact with substances.


16Axx
Skoy Scrub (2-Pack)