Tricks to keep the tile as new

Tricks to keep the tile as new

Maybe you have decided to change the bathtub per shower tray , and have taken as an option to finish the space that leaves the hole in the bath tile instead of conventional tile. Or when doing the bathroom reform, you have chosen to use this material.

Grout Cleaner Product

The tile is a material very similar to the tile although much smaller (its sides range between 2.5 to 5 cm approximately). It is the material par excellence with which the swimming pools are covered.

The conventional tile has a vitreous layer that waterproofs it and the small tiles are joined by mesh or paper tiles. Its application is by grout. Usually over time the joints tend to darken, although there are products that bring them back to the natural color .

Gresite in shower tray

There are also some ceramic tiles that imitate the tile . They are usually purchased in sheets, so their installation is much simpler by allowing several pieces to be placed at the same time . In the specialized stores, tiles are marketed, usually 30 centimeters on each side, which imitate the completion of the small tile tiles and whose prices are much lower .

The tile is an excellent option as decorative ceramics. It usually has a square shape, but we can also find it in a rectangular shape, which gives it a more original and elegant finish.

It can be found in different shades, textures and finishes that you can combine with the rest of the bathroom tiles if you do not want to make a comprehensive reform. Another of its advantages is that it gives the possibility of installing it even on an old tiling . Although it is not the most advisable and it is convenient to remove the old tiles to leave the wall clean, with a good roughness, it is possible to place tile over another material.

Bliss dish with tiles tile

This material is widely used in the renovation of bathtubs and in the tiling of bathrooms, because cleaning and maintenance is very simple . We are going to give you some tricks to keep the tile as new:

•     If they are polished, you just have to clean them with water and a neutral detergent, rinse well and dry.
•     If they have more dirt due to continued use, it is advisable to add a splash of bleach to the bath water.
•     For stains in general, you can use a mixture of 4 liters of hot water with 1/2 cup of ammonia, 1/2 cup of vinegar and 1/4 cup of baking soda.

Now it is easier to decide to change the bathtub for a shower with options such as tiled in gresite, which will give your bathroom a renovated and elegant look.

Consult in Conducha our great variety of ceramics created by the best manufacturers.

Bath tips: How to clean bathroom joints

Bath tips: How to clean bathroom joints

There are several ways to clean the joints of the bathroom tiles to leave them completely clean just like the first time. As we know these joints usually get very dirty with the passage of time, to the point that becomes visually unpleasant and generates a visual aspect for the entire bathroom. The problem we found is that many times this dirt cannot be easily eliminated, even if you want to use conventional or traditional cleaning methods.

Grout Cleaner Product

If you are a person you love to have the bathroom perfect and clean. You should know that the joints used to join the bathroom tiles are filled with joint putty, a filling paste that is characterized as porous. Therefore, eventually, and due to the wear of the floor or walls, more and more pores are being presented; To the point where these joints begin to acquire a dark appearance, which is the result of bacteria and fungi that are growing in the pores. In addition to having well clean the joints of the tiles, it is advisable for health issues that are well clean, because in this way we will be able to avoid reducing the infections.

Added to this, the tile joints in the bathroom also suffer a wear as a result of the passage of time, the usual cleaning, in addition to dust, dirt and other substances that basically make the joints get that unpleasant appearance. Therefore, in addition to cleaning the gaskets periodically, it is also important to do a small process of temporary maintenance.

One of the main ways we have to clean the bathroom tiles is to use etching and a toothbrush. The first thing to do is to add abundant water to the entire tile area in the bathroom that requires cleaning. Then you have to add the etching between the joints and almost immediately you will notice that begins to form a foam that basically indicates that the etching is acting.

You must let this liquid act for 5 minutes and then proceed to brush using the toothbrush. It is important that you make sure to brush hard for several minutes and once all the joints are well cleaned, you simply have to add abundant water to completely remove dirt and any other etching.

Another option is to clean the bathroom tiles using a sponge and baking soda that is easily achieved. All you have to do is add water in the area where you are going to clean and then add the baking soda to a container with hot water and then with the sponge begins to clean the joints. Once you have done the work, you will begin to notice that the joints acquire a much cleaner appearance, even white. Optionally, you can use a toothbrush as well as vinegar to make sure the whole area is completely clean and there are no traces of dirt.

In addition to the cleaning methods for bathroom tiles, you can also use a cleaner specially designed for this purpose, this cleaner can be purchased in a supermarket or in the large distribution. You also have the option to use grout to do the cleaning, but in this case what you're actually doing is give an extra layer of mortar to all the joints, which will have white joints that acquire their original color.

If this does not give you convincing results, you can put some spray dispenser with lye and then spray all the bath joints. Let you act a few minutes and after a while you will notice that they are left with a very nice white color, completely free of dirt. This option is the most aggressive by the lye product but is the most effective.

How to put the grout on the floor

How to put the grout on the floor

To leave our work completely finished and after the tiling or laying of the floor and the baseboard parts, the grout comes out . The grout is necessary to cover the joints between the floor tiles and the baseboard, to give consistency, while avoiding the intrusion of water and dirt into them.

Grout Cleaner Product

To decorate the joints, the first thing to do is to remove the remains and splashes of the glue cement that has been applied with a spatula, sponge or sponge. With the surface on which we are going to work, clean and dry, we go to prepare the paste for joints, also called grout.

materials

•     white cement (or joint with color already prepared)
•     Colorant
•     Water

Tools

•     drill
•     mixing rod
•     valde or cube to make the mixture
•     rubber brush
•     sponge
•     scourer
•     spatula
•     cloth
•     gloves

How is it done?

Note : I recommend using gloves for the hands, the white cement or board cracks them. In addition it is also advisable to use a mask due to the dust generated when performing the task.

1. We can use white cement and dye to obtain the color we want, or flashing with the color already prepared. In case of using the white cement and the dye, we throw in a valde or cube the proportion of color that we want to obtain, that you are seeing. The final mixture has to be rather liquid, like a custard more or less, it can not remain watery but not caked. In case of buying the flashing already with the color, we will follow the indications of the manufacturer.

2. We put the mixture of grout already prepared on the floor of a room, and spread it with a rubber brush all over the surface of it. We must give several passes to the grout so that the joints are well filled with the product. Let's pick up the excess grout for another room. To put the grout on the baseboard, we must let the paste (grout) harden a bit, and then with the help of a spatula, insert it into the holes, then continue with the same procedure as for the floor: sponge, wait, rag rough…

3. Wait a few minutes until the grout settles and proceed to clean it with a damp sponge. The passes of the sponge should be diagonal, thus achieving that the mixture penetrate better.

4. After one hour, with the hardened grout, we can clean the remains in a more thorough way, with a scouring pad or rough cloth.

5. And done, finished work.

In case of doubt, suggestion, ... do not hesitate to comment.

How to clean black grout

How to clean black grout

Grout is the coarse substance that is placed between the tiles when placed on a surface. Grout has a twofold purpose: it fills the spaces between the tiles to help keep together and prevents moisture from seeping into the tiles. The grout that has become black needs to clean. An accumulation of dirt, and possibly even mold, is likely to cause the discolored grout. Cleaning the black grout restores the original beauty of the tiled surface.

Grout Cleaner Product

Things you will need

• 1/2 Cup sodium bicarbonate
• 1/3 Cup ammonia 1
• /4 Cup white vinegar
• Warm water
• Bucket
• Large spoon
• Spray
• Bottle
• Funnel
• Wet rags
• Hydrogen
• Peroxide 1/2 Cup
• Old Toothbrush
• Dry Rags
• Oxygen Whitener
• Measuring cup
• The Paint brush

Combine ½ Cup of baking soda, 1/3 cup ammonia, ¼ cup white vinegar and seven cups hot water in one bucket. Mix the ingredients with a large spoon.

Transfer part of the solution to a spray bottle. Use a funnel to pour the solution of the cuvette into the spray bottle.

Spray solution over black grout. Wipe with a damp cloth. There is no need to rinse the solution with water.

Mix ½ cup of hydrogen peroxide in a spray bottle with a cup of water for a less expensive cleaning method. Spray solution over black grout. Rub the solution in the grout with a toothbrush. Leave the solution in the grout without rinsing. Peroxide and black spots will naturally dissipate. If there is residue in the grout after the liquid has evaporated, wipe with a dry cloth.

Make an oxygen bleach solution if the black color is still in the grout. Oxygen Whitener is safe to use, even in colored grout. Mix two tablespoons of oxygen bleach for every two cups of water in a bucket. Use a measuring cup or something similar to pour the solution directly onto the black grout. Spread the liquid all over the black grout using a brush. Allow to sit in the grout for at least five minutes and then rub the grout with a toothbrush. Clean excess water and dirt with a clean, dry cloth. Repeat this process if necessary to remove all black stains from grout.

Tips warnings

Never mix bleach or chlorine-containing products with ammonia. The combination can produce fumes that are highly toxic.

The infallible methods to clean the grout from surfaces

The infallible methods to clean the grout from surfaces

What is the secret to having impeccable floors, walls and surfaces? Clean the grout. The tile resists dirt and stains, but grout is porous and absorbs dirt and spills, making it easily stained. Here's how to clean the grout in any part of your home.

Grout Cleaner Product

Tips for cleaning household surface grout

Grout Cleaning Tips

•     First, clean the grout with hot water to remove dirt from the surface. Then spray a cleaning solution in the grout, you can create one yourself with a 50-50 mixture of vinegar and water in a spray bottle. Spray grout, let stand for five minutes and then restriégala with a soft brush. We recommend using a toothbrush or other small brush to scrub the grout. For greater scrubbing power, use an electric toothbrush. Do not use a metal brush as it will scratch the tile and could damage grout parts. Rinse thoroughly with hot water when finished.
•     You can also use commercially prepared grout cleaners or diluted bleach. Follow the manufacturer's instructions on how to clean the grout from the floor. It uses these caustic products sparingly, because regular use will erode grout.
•     For stubborn stains, mix a two-part paste of baking soda and a portion of water. Apply to the stain, let stand at night and then restriégalo with a nylon brush. Rinse thoroughly with hot water when finished.
•     If you have thick or porous tiles like marble, use a less acidic solution because vinegar can stain the tiles. Try mixing a part of peroxide into two parts of baking soda and rub the grout with a soft brush.
•     You can also use sandpaper to remove stains from grout. Fold the paper and pass it back and forth along the grout line. You can also use a eraser. Rub across the stained grout line. Rinse thoroughly with hot water when finished.

Once you have finished cleaning, allow the grout to dry for 24 hours. Then place a silicone-based grout sealant to withstand future stains and dirt. You will need to re-apply the sealant every two years, or more often if the grout is in a busy area. Knowing how to clean the dirty grout improves the appearance and prolongs the life of your tiles.

With these little tips you can keep your surfaces in perfect condition. But if you let the time pass and you need a thorough cleaning of your home, the best solution is that you get in touch with the best professionals. In Express cleaning we love to see our customers satisfied: We do the thorough cleaning of your home in a single day, with the best techniques and the best professionals. Calculate your home cleaning price and book your service in less than 4 minutes.

Can you imagine cleaning your ceramic tiles as an expert? Just use this trick

Can you imagine cleaning your ceramic tiles as an expert? Just use this trick

In addition to its exceptional beauty and versatility, porcelain floors have the advantage of being very low in maintenance. Ceramics are made of natural particles that form and are shot in an oven at very high temperatures. This process creates durability and resistance that has no comparison with most other coating surfaces. That is why we have come with the best trick that will allow you to clean as an expert the tiles of your house effectively.

Grout Cleaner Product

When glazed, they also have a protective barrier against dirt, water, stains, and chemicals, making it even more impervious to the elements. Even easy to maintain, there are some steps to be taken to make sure you keep it in top condition.

One of the most important aspects of cleaning your tile floor is to make sure that dirt and spills do not have time to get comfortable, this means it is easier to remove incidents immediately. This is easy enough to do with a mop or cloth, hot water and a mild detergent (be sure to make a stain test with detergent before use and/or obtain Italian tile manufacturer's recommendations).

Regular maintenance is important as well. The easiest, fastest, and most effective step you can take is to regularly sweep, vacuum, and scrub, thus removing moisture from the bathroom, driveway, or kitchen tile floors. A quick vacuum cleaner or sweep removes dirt and small pebbless before they can become embedded in the tile or grout. Mopping with lukewarm water and using a cleaning product recommended by the manufacturer also improves your shine and color tile.

One of the best floor cleaning products, however, is one that is easily available in your home. Water is effective in keeping your tile floor.
You can also mix a cup of white vinegar with one gallon of water for a wonderfully effective cleanser for thorough cleaning and disinfecting. If you have children or pets, you may not want to use aggressive chemicals, and this is a wonderful alternative.

Experts recommend doing this twice a year, although the tile manufacturer can recommend a different sealing program. To clean the soiled grout, hydrogen peroxide and water may be mixed evenly. Just apply this with a toothbrush to remove stains. You will find that even the grout stays properly is easier to clean and removes stains from other surfaces, such as laminate.

Wood-like tiles regularly collect dust that can be solved with a floor mop. This prevents the dust from settling into layers in the slots and making the tiles look dirty.
You may take a degreaser with a percentage of buffered acid with a rough cloth as a floor polisher.

This cleaning operation has to be done with energy and after the ground is completely scrubbed it has to be rinsed and dried perfectly with a microfiber cloth. This type of cleaning products can be used even for the normal cleaning used with water with a higher percentage of water.

Keep tile joints white

Keep tile joints white

On many occasions I have heard complaints and reliefs because of the said joints of the tiles, which at first change lose the target and you have to review periodically to maintain in good condition.

Grout Cleaner Product

In the market, there are countless products marketed to whiten, which should not give too good result, because people are going from one to another, to the point that I do not know anyone who is eternally loyal to any particular brand....

My mother's Trick

Nobody, except my mother, who when I married and were preparing the floor, gave me one of his wonderful recommendations while we did the wall tiles of my first kitchen: Now when we finish, down to the drugstore and buy a little Bruguer White Acrilic, a bottle of turpentine, and a pair of brushes, but that is Bruguer acrilic, that does not you of another, that the others yellow... Click here to see the painting . Now they have taken it clean with water and no need for turpentine. It used to be solvent and it was more cumbersome 😉


Hands to work

Said and done, as I went up, we got to work and gave the joints with the paint, which once dry is very easy to remove from the tiles with a dry green scourer. The technique is very simple: with the brush, directly from the can (it is removed before) you have to go painting the stripes no matter if the tiles are slightly stained. When it dries, it is given with the green scouring pad to remove the paint, a cloth is passed to make shine, and we can forget to review together almost the rest of our lives.

On that floor we were three years old, and I never had to go over any joints again. Then we moved to a new house, and one of the first things I did was buy my paint and my brush. We've been living here for almost 11 years, and my joints are white as the day I painted them. When I see them a little ugly, the scrub, and they stay again as freshly painted.

So my advice, if Estrenáis home, is that after scrubbing the tile walls well, instead of applying one of those whitening products that always end up falling and forcing you to review every little time, buy a piece of this paint and a paintbrush.
It doesn't matter if you've already applied another product.

If you have already been applying bleach, you can also try to paint, but before you have to scratch the joints to get the maximum possible product. I don't know if we should re-paint the joints in the future, I imagine if, because the grace is that the enamel adheres to the clean grout, but what is safe is that with the Bruguer acrilic the joints will last white longer than with a current bleach.



And this is the best way to keep the tiles ' joints white. If you liked this trick, you will also be interested to see in this post how I do to keep the white ground gaskets clean.

How you can clean the mouthpiece of your floor in a natural way

How you can clean the mouthpiece of your floor in a natural way

While the tile and natural stone can give you a dimension and a beautiful look at home, the stains of the mouthpiece can come with time, to be unpleasant. Mouthpiece is very prone to stains and discoloration as a porous substance. Although the stains on the mouthpiece are very common, they can be very stubborn and difficult to remove. If you know how to remove them and keep the mouthpiece clean you can leave your flats at their best.

Grout Cleaner Product

One of the most important things you should consider when it comes to mouthpiece stains is how to prevent and minimize staining in the first place. As time passes, dirt and grime may accumulate in grout lines due to tread traffic, leaving stained. Be careful when trapees your flats. Dirty water from the mop may also cause dirt to become trapped in the grout lines, leaving unwanted stains. You can help prevent these stains by applying a sealant to your stone floor. Most sealants will require re-application in order to maintain the best results.

When your mouthpiece gets stained, there are a number of things you can do to clean and restore your natural color and beauty. The easiest way to remove dirt and loose debris from your grout is to simply use water and a stiff nylon brush. With a little effort, the water alone will remove a lot of dirt and grime. You can also use a mixture of vinegar and water, leaving it to stand for about 15 minutes before cleaning it with a mixture of baking soda and water. This can also help remove dirt without damaging or damaging the tile or stone. Avoid the chlorine in the color grout, you don't want to discolor it. There are also a number of special commercial products to clean the emboquillados. Be sure to test any product in a small area before applying it throughout the tile and grout.

Home life style: Tile grout Cleaning methods

Home life style: Tile grout Cleaning methods

 Tile Grout Cleaning methods-How to clean tile grout

The main components of a tile grout are sand, cement and color. The surface of the tile grout is rough and porous. Dirt and accumulated grime get very easily in these pores. These particles can form cracks in the grout and the tiles in your environment may collapse as a result of this. Cleaning grout is also important to keep the new image of the tile, as the earth tends to discolor the grout very easily and also get infested by mildew and toxic fungi. Therefore, the way to clean tile grout is a common consultation. Tile grout Various cleaning methods are given in the following two sections.

Grout Cleaner Product

How to clean tile grout

The first thing to keep in mind when choosing the right tile grout cleaning method is whether the grout is sealed or not. Cleaning products in the market contain chemicals and whitening agents. If the tile joints are not closed, they can be obtained with discolored use. For tile grout like, the use of home cleaning products are perfect. Home-made cleaning agents should be preferred, also because commercial cleaners ' residues can cause damage to pets and children.
If you are using a new cleaning product, then the first to test it in any hidden area to test for any damage to the grout. Grout should be washed with water before applying any cleaning product so that all unbound remains are cleaned. Once the tile has completely dried, apply the cleaner and rub with a hard bristle brush. After cleaning, grouting the tile should be closed with the help of sealants to provide protection.

Grouting Tile Cleaning methods

Tile Grout Cleaning Method # 1-Household cleaners; You can also prepare a safe home cleaner for your tile grout. Take about seven cups of water in a spray bottle and add half a cup of baking soda, a quarter cup of white vinegar, a third cup of ammonia in it. Stir well so that all ingredients mix well. Spray it into the grout of the tile and leave it there for a while and then wipe with the help of a damp cloth. This cleaner does not need rinsing after cleaning. Make sure you do not leave ammonia or any kind of bleach to come in contact with tile grout.

Tile Grout Cleaning Method # 2-sodium vinegar or bicarbonate; To clean any stains from tile grout, you may use vinegar or baking soda. Prepare a solution with equal parts of vinegar and water and apply over the stained area and then rub vigorously with a hard brush in small circular motions. You can see the stains coming out quite easily. Similarly, a paste of baking soda and water can serve the same purpose. Rub the pasta on the affected part and then rub it with a brush. Then rinse thoroughly with clean water. Finally, wipe the surface with a sponge or paper towel.

Tile Grout Cleaning Method # 3-Trade products; For regular grout cleaning, you can use household cleaners. However, if you do not give the desired result, you should opt for commercial tiles and grout cleaner. Select a cleaning product that has a neutral pH balance. This will ensure that tile grout is not worn by chemicals present in the product. Read the manufacturer's instructions carefully before applying to the grout. Another option that responds to how to clean the grout, which is open, is to use a steam cleaner. The force exerted by the steam cleaner will facilitate the bonding between the soil and the surface of the grout and removed it. This method is useful for disposing of waste that cannot be dissolved by other cleaning products.

Tile Grout Cleaning Method # 4-bleached; When your tile grout has not been cleaned for a long time, you may need a cleaning with strong cleaning action. To do this, you can use bleach with oxygen, chlorine or hydrogen peroxide. Oxygen Whitener can be used effectively to remove any kind of strong stains. It is not harmful and it is safe in the colors as well. When applied on stains with hot water, oxygen ions decompose the dye molecules and consequently disappear in a short time. Sometimes, you may not even need cleaning. This method is an effective response for the consultation of how to clean the grout from the tile floor. Chlorine is useful for removing mold from the bathroom tiles. However, this bleach is not suitable for colored grout and may cause discoloration.

Now, that you know how to clean the grout from the tile, it is advisable to clean on a weekly basis. This will help keep the hygiene of your home and at the same time, the effort needed for cleaning will be much lower. You can choose from grouting tile cleaning methods According to your choice and convenience.

How to clean the grout?

How to clean the grout?

The tile is beautiful, durable and easy to clean in general, but the grout is somewhat different story, due to its light coloration and porous composition. It is a mixture of water, sand and cement that keeps the tiles in place, it can be difficult to keep clean. In an entrance or little room of the entrance of tiles, dirt and dirt are the usual culprits, while in the kitchen, keeping the spills are more prone to blame. Soap, mildew, mildew and meanwhile make it different from keeping and cleaning the grout in the bathrooms. Fortunately cleaning white grout is possible by using only common household products a little if the elbow fat and this item will help you clean the grout. You can follow these steps and methods to make your bath grout free.

Grout Cleaner Product

Ways to clean grout:

1. Make a preliminary clean Before we get to the deep cleaning methods. It is necessary and the best way to start is with water and a hard bristle brush. If you don't have one, you can buy at most hardware stores and carry a brushing assortment specifically designed for the purpose of cleaning the grout. Simply sprinkle hot water on the grout lines and follow your regular cleaning process. Then let it dry. This is also one of the way to clean wood floors as well.

2. Use vinegar and ammonia to clean the grout Video: How to clean, to do the grout to the ceramic. MP4 You can create your own solution. You only need a large bucket or container, then put a cup of warm water and mix half a cup of baking soda, ¼ of white vinegar and 1/3 cup of ammonia. Then mix all the ingredients correctly. Pour this mixture into the spray bottle, keeping the solution in the spray bottle will make it easy to moisten the dirtier area and mainly for storage. Fill the spray bottle completely and then shake the solution thoroughly. Spray the mixture into the grout, but start with the smallest area only about 1-2 square feet. Then spray the solution and let it rest for 3 to 5 minutes. Then start rubbing or scrubbing the brush with the help of your choice to clean the grout. You can use a hard bristle brush cleaning, toothbrush or a magic eraser is also a good choice. Put some hard work on your washing to get the ground in the dirt from between the tiles. All your scrubs will create a small puddle of dirty liquid on your tiles that must be clean. You can use a clean, dry cloth to clean all dirty liquid and drain it into a separate container. This will help to clean the tiles in the end.

3. Hydrogen peroxide and sodium bicarbonate to clean the grout Before you go in and scrub your grout you have to do a basic once again with your favorite cleaner. If you are going to clean the low grout, you can sweep and clean. To clean the bath grout and kitchen countertop grout, spray and clean it down with your favorite cleaner. This mixture also helps cleanse blood stains. You can make your own pasta with the help of hydrogen peroxide and sodium bicarbonate. Mix baking soda and hydrogen peroxide in a small container to form a thick paste. The parts of each can vary because their depend on the consistency and thickness you want to work. Then you have to spread the mixture and you can do this using your figure or toothbrush. Spread the dough over the grout. Start with the smallest area, not greater than 1 to 2 square feet. Keep the solution thick and coat the grout completely. Let stand for 5 to 10 minutes. You can start scrubbing with the help of the brush, such as a toothbrush to clean the grout. Apply firm pressure on a small area to lift dirt and stains. If you feel the grout is still dirty, you can add a little more pasta and scrub again after you let it stand for a few minutes. Continue mixing the cleaning mixture by adding to the grout and scrubbing off. Work slowly to make sure you have received all of your cleaned grout. Then use a damp cloth to clean the remaining pasta in your pasta on the tile. To finish, clean the tiles with your regular meter cleaner or a mop and floor soap.

4. Oxygen Whitener to clean the grout Video: How to clean stains and cement remains (RUBI RC 11 CEMENT REMOVERS METAL SURFACES) Clean your tile to get rid of all the dirt on the surface and crumbs that could make cleaning your grout more tedious by cleaning the tiles before getting the grout clean. You can use your regular cleaning program by scrubbing and sweeping floors or using a spray cleaner to clean the worktops. Or you can create your own solution. It can be used oxygen compound, which is a safe whitening compound, which works to dissolve bacteria and dirt while whitening grout. Mix equal parts of hot water and lye to make the solution and allow the mixture to dissolve. To apply the Cleaner choose your outlet area, no more than one or two square feet at a time, and pour it into your bleaching. You have to make sure that the grout is completely coated with the liquid. You can use a spray bottle if it makes it easier to do it. Then leave the solution to work in the grout for about 15 to 20 minutes to clean the grout. Then you can start scrubbing in the grout to remove dirt and stains. Use a small brush, such as a toothbrush to rub into the grout. You can also add more chlorine if you want to keep the area more and accelerate the cleaning process. When the bleaching process is finished, then you need to absorb excess tea fluid. Take a dry towel or any fabric suitable for you and clean the dirty water that bleach pools on the tile when you finish scrubbing. If there is a lot of dirty water then they carry out the towel between uses. Doing this will make it easier to finish cleaning at the end. Repeat the Bleach application process to scrub the grout and out until you have finished all your tile area. If it has stain resistant in grout, then you can apply bleach for one hour and since it is most suitable for you. The longer you let it soak the easier it will be for you to scrub the stain. It's the last step to clean the grout. Make a definitive mop of your tile before you clean it again as it normally does, it would be. One last clean will remove any bleach and dirt and leave your grout shiny and as new.

5. Clean up spills immediately This step will help you take care of your grout. If you are going to stop cranberry or orange juice you sit in the grout for a few hours, then it will definitely leave a stain. As soon as something spills on your floor, wipe it off with a damp cloth to remove any traces. If the stains are left behind and then pour some hydrogen peroxide on it. Let stand for one minute before cleaning with a clean cloth. Dry spills can also stain grout if left on the ground. Bar ground coffee, lumps and other solids soon after they have been released.

6. Treat small spots regularly If you want to take care of your grout and avoid having a thorough cleaning too often, then clean the small spots regularly. Use the same cleaning solution you used for deep cleaning, but use a spray bottle to treat the small area you want to clean. You can also try small alternative stain cleaning methods. Use baking soda paste and mix with a little water to make a paste. Then rub into the stained section of the grout. Allow to operate for a few minutes using a toothbrush to scrub the trash. Use White Toothpaste. Apply a little bit of toothpaste to the grout, then rub with your finger. Then leave it for a few minutes and rub the area with the help of a toothbrush. Wipe with a clean, damp cloth. You can use a rubber eraser for the smallest spots. A pencil eraser does a surprisingly good job. Always choose white Eraser instead of a different color eraser. If you choose a color paste that will end with death your grout.

7. Keep the ventilated area Video: grouting ceramic floor and removing grout Mold and fungus often affect grout in bathrooms, tend to stay wet and moist for hours at a time. The pump should be used after taking a shower or a bath. Clean the wet tile to keep your grout from getting moldy.

8. Apply Sealant Grout Always try to apply a grout sealant once a year. The application of a commercial grout sealer may help prevent spills from seeping quickly into the grout pores. Help with bath mold and mildew. A grout sealant may be purchased from your hardware store and applied in accordance with the manufacturer's instructions.

9.) Dye it in a different color Video: Efficiently clean the joints of the floor tiles and walls. Something white to keep in the grout is not a practical option. If you can dye your hair, or if you have children who like to paint in the kitchen. Consider obtaining a grout stain and its use to dye the grout in a different color. You can choose a color that matches your tile or something completely different for a contrast effect.

10. Know when to replace your grout Older grout begins to crack and crumble and worsen as they come into contact with the mixture. Moisture gets into fácilemte and degrades the soil below in time. Then he understood that his time to replace his grout, as it makes it easier to clean and prevents mold formation root so often.

5 tips for cleaning porcelain stoneware

5 tips for cleaning porcelain stoneware

Don't you get to see your porcelain stoneware floorclean? Do you pass the mop and keep noticing the footprints? Are there spots that don't come out? Do not worry! In general, all pavements are susceptible to retain dirt to some extent. This depends on its peculiarities: if its texture is rough or dry, if it has accentuated reliefs in which the dirt accumulates, etc.

Grout Cleaner Product

So what's the solution? When choosing porcelain stoneware Flooring , it is important to know all its characteristics, including the particularities of maintenance and cleaning.

Who has not happened that once the porcelain stoneware has been placed and grouted there remains of cement on the surface? In many cases, cleaning is sufficient with a diluted acid solution, such as vinegar, to remove dirt. But there are also specific products to clean the porcelain stoneware that should be used with caution, since they tend to have very high concentrations of acid.

In the market we can find products like Deterdek, of row. This descaling agent is slightly acidic and very easy to use! Just pour the liquid over the stains, let it act for a few minutes and rub with a stiff plastic bristle brush that is sufficiently abrasive, not metal bristles. Finally, you must rinse with water and clean with your usual floor cleaner. Although, because of its acidity level, you only have to use this type of products in very punctual cases.

Avantgarde Azulev

The maintenance of the porcelain stoneware is very simple: a periodic cleaning by means of a water wash or a diluted solution of detergent is sufficient to return to the pavement or cladding its original characteristics.

These are our 5 tips for cleaning porcelain stoneware:

1.     Never make an acidic cleaning on newly placed coatings or pavements, as the acid reacts with the unhardened cement, which can deteriorate the joints.
2.     It impregnates the surface with clean water before any chemical treatment, to prevent the possible absorption of the agents used by the grouting material and the ceramic support, and it clarifies immediately after the treatment, to eliminate the Chemical residues.
3.     It considers both the characteristics of the pavement or cladding, as well as the manufacturer's recommendations.
4.     Avoid abrasives, shocks and punzonamientos that can scratch, break or deteriorate soil surfaces.
5.     Avoid contact with strong acid-containing cleaning products.

How to clean black grout

How to clean black grout

Grout is a mixture of cement and color sand, and is used to bond tiles on a surface. Although traditional grout colors are common, design colors are available, such as charcoal and black. Dust and dirt tend to accumulate in grout pores, especially unsealed grout. Although Black grout does not show stains as much as lighter-colored grout, regular cleaning is still essential than black nozzle. Remove dirt and grime from black grout with effective solutions to maintain grout color.

Grout Cleaner Product

Instructions

1 pour the oxygen bleach into a spray bottle. Oxygen bleach is safe for all types of nozzles, and oxygen-free ions in the bleach dissolve the staining molecules in grout.

2 Oxygen-whitening spray directly into the black nozzle. Allow the grout to absorb the oxygen bleach for one hour. If grout becomes dry, spray more oxygen bleach over grout.

3 Rub the grout with a bristle brush. The brush will remove dirt and debris from the grout.

4 Fill a cleaning pail with lukewarm water. Immerse a sponge mop in the hot water.

5 Mop the grout with lukewarm water. Allow grout to dry air.

Grout Cleaning Tiles After Installation

Grout Cleaning Tiles After Installation

Tips on cleaning grout after tiling
The grout is usually made of cement, which means that it will be more porous than tiles and will absorb stains easier. Over time the grout will.

Grout Cleaner Product

How to clean the ceramic tile after the grout.

How to clean the ceramic tile after the grout You have installed the ceramic tiles yourself, and now you are ready to lay the lines.

How to clean the grout from the tiles once you have.

Ceramic or porcelain tiles are usually separated by grout lines that hold the tile in place. It is supported with points of.

How to clean the grout in porcelain tiles?

- Leroy. Learn in Leroy Merlin how to clean the grout in porcelain tiles in the garden How to clean the grout efflorescence of tiles. How to clean the grout efflorescence of tiles Efflorescences Grout is the whitish haze left on tiles after installation. Generally, no.The best way to clean after the grout.

The best way to clean after grout tile Grouting newly installed tile helps prevent water from entering behind the tile and 4 ways to clean the grout between tiles .

How to clean the grout between tiles. Even after scrubbing the floor, the tiles with the dirty grout could still look dirty.

Leave your floors.

How to renew the grout of the tiles

DIY With the passage of time, the grout of the joints of the floors and walls of tiles or tiles of spaces like the bathroom and the kitchen can go.

Remove grout from pool walls

Remove grout from pool walls

This is the first post I write in this forum, but lately I read enough because of the recent acquisition of a house with pool. It turns out that when you bought the house there was a huge pool built and abandoned for over 4 years.

Grout Cleaner Product

I managed to empty it from the mud in the background and I have cleaned, changed the pump and filter (there were) and the plumber who came to put the pump and the filter told me I should grout because the gaskets were damaged.

After reading several post on how to clean the joints for subsequent grouting, I gathered a gang of friends, several spatulas, 1 Karcher and many liters of hydrochloric acid. We started through the walls, throwing hydrochloric acid directly into the walls, which started to make bubbles and dripping to the ground. After a few minutes, we clarified and began to scratch... A hell, it costs a horror to remove the old grout, and I do not know what is grout or tail of the gresites. The advance is tremendously slow, for you to get an idea, I only in 4 hours I advance 1 meter x 1.60 of Promolta (the part that covers less, I do not want to think when we get to the bottom). After repeating the operation of throwing hydrochloric acid several times, I realize that the walls are still very difficult to scratch but the ground is being done practically only since the whole product dripped and stays on the ground, doing all its action on the ground , and very little on the walls. I've come to let the Slfuman act 15 minutes to see if so and there is no way. The walls were not so damaged, the worst was the ground, but now that I have already cast salfuman all I guess they will be quite weakened and I prefer to do them all.

I don't want to join the new product until I have the pool with the clean gaskets, but at this rate I don't end up in 3 months scratching. Can you tell me a way to get the grout out of the walls?

In all the sites I have read that in order for the grout product to grip well, a depth of 2 mm is required. In my pool 2mm is to remove the tail between the joints, as the tile is placed one by one. Do I need to remove that tail?

For the grouting I will use Sika Ceram SmallGrout and instead of water I will mix with Sika Ceram LatexGrout. What think? I have read that recommend Sika Ceraam 225, but in several hardware stores that I have asked and even the commercial of Sika, I have advised the SmallGrout, since the 225 is to glue and not to grout.

To summarize my questions are:

1-How can I remove the old "grout" from the pool walls without dying in the attempt?
2-To what extent should the grout be removed? Let the joints remain hollow, just the tail...
3-What opinion do you have about Sika Ceram SmallGrout + Sika Ceram LatexGrout?
4-If you put the new grout on top of the joints that have passed hydrochloric acid and are somewhat softened, would it be very problematic for product adhesion?

If you need a little more info, I'm at your disposal.

Thank you very much for all the information you can provide.

Greetings.

How to eliminate old grout and not die in the attempt

How to eliminate old grout and not die in the attempt

1st: We all suffer sooner or later the problem of having to eliminate the blessed grout that gave us our "Experienced Pool builder" :hammerdrill:

None, I repeat none of the cements used for grouts are formulated to be continually "soaking".
For the grouting of the tile in Pisicnas you must use specific products like the ones discussed here:

2nd: Preparation of the joints, half filled even from the previous deteriorated cement.

    It is one of the big mistakes :hammer: that is made when you make a grouting. It is thought that the cement is like a painting and is given almost as such, and of course, it behaves, after filling the pool is much clear, in a few months later the joints present the pitiful state they had before the grout.

Grout Cleaner Product

    Inevitably, the remainders of previous grouting must be extracted in its entirety, leaving practically visible the glue of the tile. It is necessary between 3 and 4 mm of depth in the gasket so that the cement grips well. I know it's very laborious, but doing it another way is wasting time and money. Without counting the frustration that is going to be found every day and indefinitely in the background the slats of the cement detached

    Methods for emptying and sanitizing joints ? As the thin screwdriver, moistened aged gaskets come out as butter. Someone will ask me if I have calculated the linear meters of joints that can be in a pool of medium sized tile, and yes, I have, and is to get sweaty before you start with the emptying. We can help with a pressure water cleaner (Karcher or similar) with extreme care to not also affect the glue of the tile and this is detached. This can happen if the tile has bad clamping status.

    But there is fortunately a trick for chemistry to do this work for us: The water is heavily acidified. In fact, we remember that one of the reasons for maintaining and a pH of not less than 7 is to avoid the corrosion of the joints. The water with a ph between 5.5 and 6.5, in combination with a alkalinity lower than 50 has a Langelier index next to-1 and "Zampa" materially the joints. That if, very slowly, little by little, but after several weeks or months the meetings will have disappeared. But the downside is that if we do not stop the process at the time, then it begins to affect the glue and the gresites can become detached.

    Therefore, it is only a matter of planning ahead The grouting: For those who want it already for the next season, begin already lowering the alkalinity pouring as described in a specific thread (by water aeration and by addition etching), and then reduce the pH by dosing also more slowly.
    The amount of etching we need is immense, consider that the pH scale is logarithmic, it takes 10 times more acid to lower the pH of 6 to 5 than 7 to 6. Therefore, it will be difficult for us to move from Salfuman

    Weekly The lowering of the joints (move the water with the pump so that the acid is distributed well by all the volume), if we see that the emptying is null or too slow, vertamos then another of Salfuman in the water. When we see that the cement has disappeared, stop the process and replace an acceptable pH (over 7) so that the water does not continue with the corrosion of the glue. Take care that during the process the chlorine level does not fall too low and the water becomes green. We can prevent the emergence of algae with a low level of desinféctate by dosing secondary ammonium gas at the recommended doses on the product label.


Shortly before starting the grouting, empty the water and proceed to remove the remains of the old grout that have resisted the acid attack, use the pressure washer at its discretion to clean the gaskets.

The application of grouting cement should be made with ambient temperatures not exceeding 20 º C or less than 5 º C , to avoid freezing of grouting material or rapid hardening. The ideal time for grouting is at the end of winter-early spring, depends on climatic zone, apply the cement with a spatula or rubber trowel (no Embadúrnarlo with a brush) attempted to fill the entire gasket and immediately after removing the Burr with a cloth, sponge or esparto pad before hardening.

A greeting,

How to remove mold from tiles and joints (grout)

How to remove mold from tiles and joints (grout)

Remove mould from tile and grout

Mold in tiles and grout

You will often see mold growing on the tiles in places like the bathroom or kitchen. The good news is that mold can be easily cleaned from non-porous tile surfaces.

Grout Cleaner Product

How to remove mould from tile and grout

Start by rubbing the tiles and grout using a brush together with a household cleaning product or a specific matte product that kills mold. There are also commercial tile or grout cleaners that can be purchased.
Eliminar el moho de la lechada (juntas de los azulejos)

After this, you will probably find that there are still mold stains left in the grout (it is known as the cement between the tiles ' joints). You can use bleach to make these spots disappear. Before using bleach, do a test to make sure the bleach does not discolor the tiles.

Don't forget to wear gloves to protect your hands from bleach.

Apply the bleach to the grout and let it rest for about 10 minutes. Instead of chlorine bleach you can use hydrogen peroxide if you want, or buy a product like the Oxyclean containing oxygen lye. If you have a septic system, it's better to use oxygen bleach than chlorine bleach.

Another alternative is to use baking soda. Mix with water to form a paste and then use a toothbrush to scrub in the grout.

If you find that the stains remain in the grout after bleaching, then repeat the process. Then rinse the chlorine with plenty of water.

If stains do not go away you can try using bleach-soaked paper towels. Wet the paper towels in bleach and then adhiérelas to the cement grout where the stains are located. Give it a little time and this should make the mildew stains disappear in the grout definitely.

Seal Cement Grout

Another thing you can do is apply a sealant to the cement grout. This will protect you from any small amount of mold remaining in the grout and also helps prevent mold from growing in the future.

Replacement of cement grout

You also have the option to completely replace the grout. First of all you will have to scrape the old grout. You can use a flat-blade screwdriver for this. You can buy new grout mixture from the hardware store and apply it yourself. Sealing the new grout with a cement grout sealant later will give you even more mildew protection.

10 tips on how to grout a pool

10 tips on how to grout a pool

Like grouting a pool of tile, tile, etc...

Summer is coming, we walk around the pool and see the deterioration of the pool joints.

Shall we call someone to apply the grout? Or we do it ourselves.

Grout Cleaner Product

At this point, you decide.

If you have chosen to do it yourself, here I answer some questions that you can ask yourself and I suggest some advice.

Is it an easy task to grout a pool?

No, as in principle you think. It requires first to want to do it, some time and effort "the usual".

The Good thing is that now I'll show you how to grout the pool by applying some tricks. You will be perfect with less effort!! That's cool. :) p

The first thing we have to think about is....

What pool grout will we use?

We always talk about grouting the joints of the pool tile with white cement. Many professionals and non-professionals still use it for their ease in the application "cutting labor time" and low cost of this material, but:
Using white cement in the grout of your pool will not be very resistant to the passage of time and damage the support of the tile or platelet having to repair also the time.

So we're going to use technical mortars; as a grout for the pool.
The first thing we have to keep in mind is that type of borad we will use for the grout of the pool and the choice would influence the type of maintenance of chlorinated and the quality of the grout.

    If we have a chlorinated maintenance of chemical and common water "the whole of life, with chlorine". A more durable mortar than white and economic cement that may be advisable: 

«This grout mortar is the most basic and economical for grouting a pool but not the most durable as the following technical grout mortars for swimming pools «.

    A grout mortar for the most specific and recommended pool of chemical and common chlorination "lifelong, chlorine" is:

«Mortar recommended for grouting common chlorination Pools «with chlorine» Preventing the proliferation of microorganisms "algae and fungi".

    A large mortar much more technical and specific for cloraciones of salt pools, hot springs, etc...

This technical grout mortar provides pool joints with more stable and uniform colors, UV resistance, prevents the proliferation of microorganisms Pudiéndola use in any type of chlorination, chlorine and water pools. Thermals, etc...
"It has a rather higher cost but offers much more with its grout to the pool joints than the previous two."


Steps to follow in how to grout a pool.

1. Clean the pool joints and tile thoroughly using a kacher and rubbing with scouring pad if necessary using specific pool cleaners.


2. The weakened joints will have to be removed with suitable utensils until you provide a solid and sturdy base to apply a good grout to the pool.
 limpiar juntas de piscina con destornullador


4. Already sound and clean the dust pool and other components we proceed to the grout application in the pool.

«Depending on the way that we are elected we will use one or another form of application more appropriate».
Application of the borate for grouting a conventional chlorine pool.


The application of the pool grout is the most difficult and complex step for this we need a thorough cleaning of the parts and together getting a strong base for the application of grout. You need a climatic ideal conditions for a good start up of the grout respecting its setting times and cleaning all its faculties and resistance to time.

    Do not apply grout to the pool with adverse weather conditions such as below 5 degrees or above 30 degrees.

So I advise you in heat conditions start at about 5:00 am and leave when you see that the heat affects the application or afternoon at about 18:00 pm. Do not apply with risk of frost, rain, strong wind or direct sun. climatología para lechar una piscina

    A bucket or drawer will be used to produce the grout "I recommend using a blender for proper kneading of the product."
    A rubber trowel for your application.
    Another drawer or bucket to have clean water with a sponge for later cleaning.

5. Place the dough in the bucket or drawer and add water and mix with the mixer until you get a "non-LIQUID" consistent paste, allowing it to rest for about 5 min for re-kneading and use.

6. Already clean the gaskets proceed to fill the joints with rubber trowels diagonally to the joints by pressing and compacting the grout mass firmly by removing the excess material with the same trowel.

7. Allow the material to harden for approximately 20 to 30 minutes until the pasta becomes opaque.

"It will always depend on the direct sun and the temperatures, nothing better than your view based on this orientation."

8. After the curing time of the grout we proceed to clean the surface with a hard sponge.

    Clean the remaining grout with a semidry sponge making circles without rushing in the cleaning Aclarándola constantly. "This will kill the curing time of the excess grout so that it will not adiara with force to the tile and difficult its cleanliness.



9. Once the grout has been killed and opaque recently we will proceed to clean with sponge lightly moistened in the diagonal direction of the joints with frequent rinses per pass. «You will be able to use the different sides of the sponge so you won't have to make so many rinses.


And we have our pool and as new grout!


Epoxy Pool Grout Unlike the above comes with 2 components.

Now I will explain how to apply a grout to a pool chlorinated salt, thermal, common or if you want to give a better quality and have less maintenance over time. Eye!! I also recommend it for joints with a depth that does not exceed 2/3 of the thickness to the termination of the cleaning, with good base support.

We skipped points 1 and 2 above explained and started.

3. Pour the component into a "pasta" in a drawer and then cut the corner of the by pouring component B over the "pasta".

' Mixing ratio 100 parts of the weight in component A, for every 8 parts by weight of component B '.

Mix the 2 components by means of a mixer with a spiral stirrer to obtain a homogeneous mixture without lumps.

«Go scratching with spatula or paddle the walls and bottom of the container avoiding the remains of the product without reacting not making partial mixes».

The grout obtained always influenced by the ambient temperature can be worked approximately for one hour at temperatures of 23 degrees.

We will apply it as above, with rubber spatula and diagonally to the joints removing the excess material.
Now is when the application of cleaning this epoxy pool grout will be different from the above.

10. Cleaning and finishing will be done when the product is still fresh with care not to empty the joints and leave no veils in the tile.
· A first cleaning of the grout will be sprinkling clean water manually, using a wet white felt trowel by forcing circular movements clockwise and on the contrary for proper parts sealing and removing excess grout.

"Change the wash water frequently".

«When the felt of the trowel is very impregnated with resin and it is not possible to clean it substitute for another».
· A second cleaning will be with an abrasive sponge obtaining a smooth and closed gasket, drying the excess water.

"Change the wash water frequently".

' When the sponge is very impregnated with resin and it is not possible to clean it, replace it. '

At this point you will have the feeling that I have done well;)
I hope you serve these 10 tips to know how to grout a pool.

How to remove the cement from the tiles and achieve a finish

How to remove the cement from the tiles and achieve a finish

In most cases, to achieve a perfect finish, it is not enough to make a precise placement of the bricks, tiles or any other coating material. It is normal to produce cement stains as a result of the work itself, but this fouling or imperfection is now easy to fix. RUBI has launched a product to remove cement from the tiles: it is the RC-10 and here we present it to you.

Grout Cleaner Product

RC-10 Quitacementos

The RC-10 is not only a product designed to remove cement from the tiles, but also serves to remove stains from mortar, glue and any other calcareous-based substance. It is a strong acid and fast-acting descaling agent.

How to remove cement from tiles: Step by step

These are the steps to remove these embedded stains: Apply the product directly on the stain and let it act for no more than 4 minutes. After that time, you have to rub with a brush at the same time you have to clear the surface to check the results. Dry the area with a cotton cloth and repeat the process when the inlay requires it.

In addition to serving as cement removers, it can also be used to remove stains from saltpeter or efflorescence that are mainly given in brick walls. To carry out this function, it is necessary to dilute the product in water so that the density is lower but the yield per square metre is greater.

It should be noted that respecting the times indicated is very important, because over these periods may appear corrosive vapors. In addition, special attention must be paid to the non-contact of metals and it is recommended to test the effectiveness of the product on a small area of the wall.

How to clean the grout mold

How to clean the grout mold

Because Grout is porous it can absorb more moisture and thus helping mold formation. Cleaning grouting materials will prevent mold from spreading.

Grout Cleaner Product

Tools and Materials:

•     Oxygen Whitener (liquid or powder)
•     Measuring cup
•     Gloves
•     Two cubes 2
•     Sponge
•     Mop
•     Hot water
•     Agitator or a painter's stick
•     Brush hard Bristles Scrub

Security measures

Although it is sung chlorine oxygen, which is not toxic, it is still indicated to wear a mask and gloves.
Also make sure that the area you are working on is good ventilation.

Preparing the area

Delete all objects in the area that need cleaning. You will have more space and also won these objects; Not be affected by chlorine.

Cleaning Solution Preparation

Mix 50 ml of oxygen bleach with a liter of water, or proportional quantities. Use hot water for greater efficiency.

The application of the mixture

Use a sponge or mop for work. Soak the grout and let the solution stand for about 15 minutes. Thus, chlorine will enter grout spores and kill any mold.

Scrubbing and rinsing

Use a brush or abrasive sponge. Rub the grout thoroughly and after you have finished rinsing the soil work with a little hot, clean water.

Repeat steps if mold has not been removed.

Inspection

After grouting have dried, see if there is any more mold. Once the grout dries, it becomes brighter.

Reducing moisture levels can prevent you from having to deal with mold problems.

How to Clean Tiles with Steam Cleaners 【Guide and Tips】

How to Clean Tiles with Steam Cleaners 【Guide and Tips】

The most disturbing task is when you need to clean the bathroom and kitchen tiles and not say the patio tiles, not only for all the chemical and detergent materials that are needed to keep them clean but because of the physical effort Required for that work.

Grout Cleaner Product

The best way to clean both the lines of the tiles and the different types of tiles you have at home is with the power of steam, without the need to use detergents or chemicals in the process and the best thing is that you can leave hygienically Clean effortlessly.

To help you discover how to clean the tiles with steam then I will show you the steps you must make, depending on the type of tile you have at home.

How to clean grout lines from steamed tiles.

Limpiando las lineas lechadas de azulejosFill the boiler of your vaporeta and wait for the time set to reach the right temperature.

Verify that your vaporeta is ready to do the cleaning work with a good pressure of the steam.

The vaporetto usually have the accessory to focus the steam towards the most difficult places, it can be nylon or brass brushes, some have both brushes.

For cases that the grout lines have a lot of dirt, grease and mold, which are very difficult to remove, I recommend using the brass brush to clean the lines of steamed grout.

For cases where the grout lines are not so dirty and you feel it is easy to remove, you can use the nylon brush to clean the grout lines with steam.

After identifying the soil level and the correct attachment to vaporize the grout lines, apply the steam directly to the grout line by scrubbing the brush with a steady, paused motion ..

Although it is a difficult surface to clean the power of the vapor will penetrate into those small holes eliminating the dirt and fat, easily restoring the grout lines of the tiles, with very little effort.

Then you pass a microfiber cloth or the cover of the accessory for any excess of dirt that has remained in the vaporization of the grout lines.

How to clean smooth tiles with steam

Verify that your vaporeta is ready to vaporize and properly sanitize your smooth tiles.

In the majority of the vaporetto, the accessory to clean the smooth tiles with steam is rectangular and with a microfiber sheath.

When steam begins to come out at the right pressure, pass the brush with its microfiber sheath firmly and slowly on the surface of the smooth tiles ..

Be sure to cover the entire surface to be sanitized. The ideal use of steam is that it dries immediately. The steam will eliminate the dirt and grease on the surface and the cloth will help you to collect the dirt that goes off during the vaporization of the smooth tiles, leaving them shiny and hygienically clean.

The high steam temperature in addition to leaving the tiles deeply clean is dried timely, ensuring the reduction of germs and bacteria quickly.

How to clean porous or non-slip tiles with steam

Verify that your Vaporeta is ready to vaporize and thoroughly sanitize your porous tiles.
Use the nylon bristle brush for deep cleaning of porous tiles and a microfiber sheath.

When steam begins to come out at the right pressure, pass the brush firmly and slowly over the surface, letting the steam flow deep into the pores of the tiles and the brush bristles help you remove the Dirt.

The microfiber cloth cover will collect excess dirt that has become detached during vaporization.

Tips for cleaning steamed tiles.

Vaporeta polti vaporetto eco pro 30Always check that the internal pressure of your Vaporeta boiler is at the correct temperature before starting steam cleaning.

For cases where the dirt on the tiles is very extreme:

You must apply the steam previously throughout the surface, then perform the process of vaporization and cleaning of the tiles, as indicated above.

Use the appropriate and specialized accessory for the surface you want to clean with steam.

Always pass the microfiber cloth after cleaning the tiles with steam, to remove the residue of dirt that it leaves when vaporizing.

It is inevitable the emergence of mold in your bathrooms, even though you keep it clean daily, so do not let the dirt penetrate deeply vaporizing your tiles constantly.

For cases that suffer from back pain, neck, waist or others, use your vaporeta to clean your tiles effortlessly.

When cleaning the tiles with steam, remember that you should always dry them properly, because:

•     There is a risk of accidents, being slippery.
•     The existing moisture allows mold to appear more quickly.
•     Possibility that dust or other element in the environment will stay in the tiles again

Remember, you can always find more information about cleaning your home with Vaporetto here, in addition to opinions and reviews of a wide variety of vaporetto and where to buy.
Then I leave a table of several vaporetto with which you can leave your tiles clean and shiny.