In most cases, to achieve a perfect finish, it is not enough to make a precise placement of the bricks, tiles or any other coating material. It is normal to produce cement stains as a result of the work itself, but this fouling or imperfection is now easy to fix. RUBI has launched a product to remove cement from the tiles: it is the RC-10 and here we present it to you.
RC-10 Quitacementos
The RC-10 is not only a product designed to remove cement from the tiles, but also serves to remove stains from mortar, glue and any other calcareous-based substance. It is a strong acid and fast-acting descaling agent.
How to remove cement from tiles: Step by step
These are the steps to remove these embedded stains: Apply the product directly on the stain and let it act for no more than 4 minutes. After that time, you have to rub with a brush at the same time you have to clear the surface to check the results. Dry the area with a cotton cloth and repeat the process when the inlay requires it.
In addition to serving as cement removers, it can also be used to remove stains from saltpeter or efflorescence that are mainly given in brick walls. To carry out this function, it is necessary to dilute the product in water so that the density is lower but the yield per square metre is greater.
It should be noted that respecting the times indicated is very important, because over these periods may appear corrosive vapors. In addition, special attention must be paid to the non-contact of metals and it is recommended to test the effectiveness of the product on a small area of the wall.