There are several ways to clean the joints of the bathroom tiles to leave them completely clean just like the first time. As we know these joints usually get very dirty with the passage of time, to the point that becomes visually unpleasant and generates a visual aspect for the entire bathroom. The problem we found is that many times this dirt cannot be easily eliminated, even if you want to use conventional or traditional cleaning methods.
If you are a person you love to have the bathroom perfect and clean. You should know that the joints used to join the bathroom tiles are filled with joint putty, a filling paste that is characterized as porous. Therefore, eventually, and due to the wear of the floor or walls, more and more pores are being presented; To the point where these joints begin to acquire a dark appearance, which is the result of bacteria and fungi that are growing in the pores. In addition to having well clean the joints of the tiles, it is advisable for health issues that are well clean, because in this way we will be able to avoid reducing the infections.
Added to this, the tile joints in the bathroom also suffer a wear as a result of the passage of time, the usual cleaning, in addition to dust, dirt and other substances that basically make the joints get that unpleasant appearance. Therefore, in addition to cleaning the gaskets periodically, it is also important to do a small process of temporary maintenance.
One of the main ways we have to clean the bathroom tiles is to use etching and a toothbrush. The first thing to do is to add abundant water to the entire tile area in the bathroom that requires cleaning. Then you have to add the etching between the joints and almost immediately you will notice that begins to form a foam that basically indicates that the etching is acting.
You must let this liquid act for 5 minutes and then proceed to brush using the toothbrush. It is important that you make sure to brush hard for several minutes and once all the joints are well cleaned, you simply have to add abundant water to completely remove dirt and any other etching.
Another option is to clean the bathroom tiles using a sponge and baking soda that is easily achieved. All you have to do is add water in the area where you are going to clean and then add the baking soda to a container with hot water and then with the sponge begins to clean the joints. Once you have done the work, you will begin to notice that the joints acquire a much cleaner appearance, even white. Optionally, you can use a toothbrush as well as vinegar to make sure the whole area is completely clean and there are no traces of dirt.
In addition to the cleaning methods for bathroom tiles, you can also use a cleaner specially designed for this purpose, this cleaner can be purchased in a supermarket or in the large distribution. You also have the option to use grout to do the cleaning, but in this case what you're actually doing is give an extra layer of mortar to all the joints, which will have white joints that acquire their original color.
If this does not give you convincing results, you can put some spray dispenser with lye and then spray all the bath joints. Let you act a few minutes and after a while you will notice that they are left with a very nice white color, completely free of dirt. This option is the most aggressive by the lye product but is the most effective.