How to get rid of a brown ring in a toilet bowl

How to get rid of a brown ring in a toilet bowl

A brown ring often develops around the top of the water line in the toilet bowl, as that is where the hard water residue, lime, dirt and other elements end up forming and creating the stain. To get rid of the toilet bowl ring, you want to use ingredients that directly attack the accumulation without using much physical effort. You also want to stay away from the harmful chemical ingredients that are dangerous to the home and the environment.

Toilet Bowl Ring Remove Product

Instructions

1 Pour 2 cups of baking soda into the toilet bowl and scrub the ring with your bath brush. Often, this will eliminate the light toilet rings.

2 Fill a spray bottle with white vinegar, and spray it heavily around the ring of the toilet bowl. Let the vinegar sit for about 30 minutes.

3 Scrub the toilet bowl again with your toilet brush and pull the chain.

4 Repeat as necessary to remove any remaining toilet bowl ring.

How to remove iron stains a toilet bowl

How to remove iron stains a toilet bowl

The rust stains that build up inside the toilet bowl come from the iron and natural mineral components found in hard water, although even water softened over time can cause stains. Iron accumulates in the porcelain of the toilet bowl and oxidizes when exposed to air. The simplest way to avoid the accumulation of rust in toilets is to scrub the container regularly with a cleaning bath; However, once there is an accumulation, it is still relatively easy to remove.

Toilet Bowl Ring Remove Product

Instructions

1 Put on rubber gloves and open the bathroom windows, if possible, for ventilation.

2 Drain the water from the toilet. If necessary, scoop the water from the toilet bowl with an old cup and dump it in a bucket.

3 Add the bathroom cleaner to the bowl, following the manufacturer's instructions.

4 Scrub like this, using the bathroom brush.

5 Wipe up any spatters immediately with old rags. Bathroom cleaner can damage or lye bathroom carpets, tiles or accessories.

6 Pull the chain several times to rinse after scrubbing.

Tips and warnings

•     If you have chemical sensitivities, use a mask to protect your nose and mouth during cleansing.
•     Never combine any of the bleach products with bathroom cleaners that contain hydrochloric acid. In combination, they release toxic vapors. If a toilet tank cleaner containing bleach is used, remove and discharge several times to rinse the toilet before cleaning.
•     Wash the skin immediately with clean, cold water, if you get any cleanser by itself.

How to remove blue rings from a toilet bowl

How to remove blue rings from a toilet bowl

Blue rings in the toilet bowl are usually caused by deposits of minerals that are present in the water. Copper is the common culprit of blue or greenish stains. These stains can make your toilet to be old and dirty. Fortunately, there is no need to live with these unpleasant looking spots. With a few common household items and a little hard work, you can remove the blue rings and restore the look of the toilet bowl.

Toilet Bowl Ring Remove Product

Instructions

1 Pull the chain and allow the container to fill with clean water.

2 Pour 2 to 3 cups of white vinegar into the toilet bowl. Rub the toilet bowl with the mixture of water and vinegar and a toilet washer. Allow the vinegar to sit in the bowl for 20 minutes.

3 Scrub the toilet bowl once more with the water and vinegar mixture and an odorless scrubber. Pull the chain and allow the container to fill with clean water.

4 Pour 2 cups of ammonia into the toilet bowl. Scrub the blue rings with the ammonia-water mixture and a toilet scrubber. Let the mixture sit in the container for 15 minutes.

5 Scrub cleans the toilet bowl with the ammonia-water mixture and the scrubber. Scrub until the blue rings are no longer visible. If necessary, allow the ammonia-water mixture to sit for an extended period of time.

6 Pull the chain to rinse the container. Let it fill with clean water.

7 Clean toilet bowl every week with white vinegar or a commercial toilet cleaner.

Tips and warnings

•     Alternatively, empty as much water as possible and scrub the blue rings with a wet pumice stone.
•     Never mix ammonia with chlorine or products that contain chlorine. The resulting vapors are toxic.

Natural Handmade Organic Olive Oil Soap, Luxury Soap Bar Helleo (4.2 oz, Prickly, Aloe Vera)

How to cleanse your face with Aloe Vera

How to cleanse the face can apparently seem almost unimportant but the reality is that it is the most important step, and that you should not skip, in your beauty ritual. From Proaloecosmetics.com we explain in this simple tutorial how to clean your face and we invite you to try our Volcanic Lava Soap.



Natural Handmade Organic Olive Oil Soap, Luxury Soap Bar Helleo (4.2 oz, Prickly, Aloe Vera)

You can also learn how to make homemade aloe vera body shampoo soap!

How to clean the face in 7 steps
1. Washing your face is like brushing your teeth. What do you do every day? Well this must be the same and is part of the correct process of how to wash the face. You should clean your face every day before going to sleep (even if you have not left home all day). Environmental factors, pollution, dust, and even the skin's own fat are the main agents that cause dirt on our face and that we should remove daily.

2. Another of the determining factors that you should know about how to clean the face is the premise that you use a specific soap for this task. As the Aloe Vera and Rosa Mosqueta face soap. Soap made with Aloe Vera and Rosa Mosqueta, suitable for all skin types with moisturizing and regenerating properties. In addition, thanks to its high glycerin content, it helps to soften and hydrate the driest skins.

3. Use warm water to wash your face. Be generous with the contribution of water and moistening the Aloe Vera soap will get a very soft and pleasant foaming with which you will give circular movements for a minute on it. How to wash your face well, depends on the effort and care you put into this action.

4. Once the soap is well spread and the face is massaged, remove it with plenty of water.

5. Dry your face. It is important that you do not scrub the towel but that you do it by pressing gently and give yourself several "toquitos" thus activating the micro-circulation. If you scrub with the towel you can hurt yourself and have unwanted micro-breaks.

6. Once the face is washed, we recommend that you use a facial tonic to revitalize the skin of the face and make it shine and look healthy and nourishing.

7. Finally and as a final step of how to cleanse the face, apply a moisturizer. We recommend our Facial Moisturizer Aloe Vera 200ml. Facial cream that will restore and maintain the proper hydration of your face, thus providing luminosity, freshness and smoothness. Thanks to its centella asiatica stem cells, constant regeneration is achieved. Suitable for all skin types.

Bath & Body Works 2-Pack Stress Relief Body Bar - Eucalyptus & Spearmint

13 natural cleaning products you can do at home

Prepare these homemade cleaning products with ingredients that you already have in the pantry. Clean any surface of your house naturally and without toxic!



Bath & Body Works 2-Pack Stress Relief Body Bar - Eucalyptus & Spearmint

The most used cleaning products contain toxic chemical ingredients: phthalates, perchlorethylene, 2-butoxyethanol ...

Contact with these synthetic ingredients poses serious health risks. For example, phthalates are endocrine disruptors, alter the hormonal balance. They are present in all those products with "fragrances" and "perfumes", from multi-purpose cleaners to dishwashers. And also in many personal hygiene items.

13 homemade detergents to clean the entire house
It is very easy to prepare homemade cleaners based on natural products.

Sodium bicarbonate is used to clean, deodorize, soften water, dissolve dirt and grease, eliminate odors ... and does not scratch surfaces.

With lemon juice you not only end up with fungi and mold, but it also serves to whiten your clothes and aromatize them naturally.

Always have a natural vegetable soap on hand. It can be glycerin, coconut, Marseille, in tablets, liquid, in flakes ... It is biodegradable and serves everything.

White vinegar is very versatile. Get rid of bacteria and fat. Eliminates mold, odors and stains.

1. Multi-purpose cleaner
Mix white vinegar and water in equal parts in a spray and add a few drops of tea tree essential oil.

You can use it on metals, tiles, polished surfaces ...

2. Glittering floors
To clean terrazzo or ceramic floors, add 1 cup of white vinegar to 4 liters of water.

If you have parquet, dilute 1 tablespoon of potassium soap in 5 liters of water and then pass a dry mop.

3. Window cleaner
Mix vinegar and water in equal parts, add salt.

Then dry with newspaper.

4. Very natural air freshener
In 1 liter of water boil 1 lemon sliced, vanilla and 1 branch of rosemary.

Once cold, strain and fill the sprayer. You will enjoy a refreshing and natural aroma.

5. For countertops and surfaces of household appliances
You can clean all these surfaces directly with hydrogen peroxide.

Spray and then pass a cloth.

Ask yourself these 3 questions before buying kitchen utensils

HEALTHY KITCHEN

Ask yourself these 3 questions before buying kitchen utensils

6. Cutting boards and sinks
In this case we will also use vinegar.

Spray first with hydrogen peroxide and then with vinegar.

7. Grease remover for ovens
The grease that sticks to the walls of the oven is really difficult to remove.

The bicarbonate is a great alternative to conventional cleaners, very toxic and aggressive.

Use 200 grams of baking soda and mix with water until a thick paste is obtained. Extend it on the walls of the oven, especially the bottom one. Leave on all night.

8. Brightener for wood
Make a polish for your furniture with 15 milliliters of olive oil, the juice of a lemon and 15 milliliters of water.

Shake the mixture and spray.

To remove the dust, use microfiber or moistened cotton.

9. Carpet stain remover
The ingredients for this stain remover are: 15 milliliters of white vinegar, 30 milliliters of hot water and baking soda or corn starch.

Mix the vinegar with water and spray over the spots.

Then sprinkle some baking soda or corn starch on the carpet and vacuum.

10. Cleaner and descaler for the toilet
Use 1 cup of baking soda and 1 cup of white vinegar.

Spread the baking soda and let it act for one hour. Then pour vinegar and leave for 5 minutes. Rub well with the brush.

11. Antical and cleaner for taps and tiles
Thread half a lemon in the mouth of the tap and let it act against the lime.

Put a few drops of lemon on a cotton ball and clean the chrome. Wait 1 hour before clarifying.

For the tiles mix vinegar and water in equal parts.

12. Laundry detergent
The ingredients are: 2 bars of natural soap, 2 cups of borax, 2 cups of baking soda, 9 liters of water and 15 ml of essential oil to taste.

Grate the soap and boil it in a liter of water. Mix borax and bicarbonate. Add everything to 8 liters of water and aromatize with the essential oil.

13. Fabric softener
Use 5 liters of white vinegar and 30-40 drops of lavender or rosemary essential oil.

Mix it and use half a cup per wash.

(6 Pack) Real Castile Bar Soap, made with 100% Organic Olive Oil, All Natural, Vegan, for Super Sensitive Skin, Handmade by A Wild Soap Bar (6 pack)

Do you know what is the right way to clean your navel?

The moment you see a dirty navel, it will be enough to want to put in the shower and clean yours.



(6 Pack) Real Castile Bar Soap, made with 100% Organic Olive Oil, All Natural, Vegan, for Super Sensitive Skin, Handmade by A Wild Soap Bar (6 pack)

• - Doctors have removed navels, waste that turned out to be a mixture of bacteria, dirt, sweat, soap and cream ?, explains the Alexandria V. Booth certified dermatologist.
• - The patients go to the doctor because they think they have skin cancer, and when they analyze them, it turns out that they are years of accumulated grime, "he added.

Your navel should be cleaned as you clean other parts of your body; Otherwise, this part can develop bad odors and infections that cause itching and irritation.



Also, in extreme cases, the lack of navel cleansing can develop stone-like masses, which can grow to cover the entire navel and infect it, inflame it and even ulcerate it.

Even if your navel seems to be clean, the reality is that it is dirtier than the eye can see. On average, a normal navel, keeps 67 different species of bacteria.

HOW TO CLEAN IT?

Bathing normally and using your fingers to wash this part of the body with soap and water. Also once a week it is recommended to put a small cotton ball dipped in alcohol to eliminate all bacteria.

If your navel is in worse condition than you thought and the bad smell does not go away, you should go to your doctor so that together they can find the solution.

Stress Relief Eucalyptus Spearmint Body Bar Soap 8.8oz/249g

How to remove oil stains on clothes

The easiest way to remove oil stains on clothes is to put liquid soap on the stains. Use your hands or a toothbrush to rub the stain. Next, rinse the liquid soap thoroughly. Wash clothes alone with a regular cycle and then let dry. Do not put the garment in the dryer, because the stain may remain. If the stain persists, repeat the process until the stain disappears. To learn how to use baby powder or a stain remover to remove stains from clothing, continue reading.



Stress Relief Eucalyptus Spearmint Body Bar Soap 8.8oz/249g

Cover the entire stain with liquid soap.

Stain removers can help you, but they are not necessary. You can use shampoo, as well as body oils. Alternatively you can use a bar of soap, or a bar of soap for hands or body (make sure you do not have any additives that could prevent cleaning, for example, Dove would not be recommended). You can also use fatty soaps, with "laundry soap" labels. Moisten with water (or ammonia for extra fat removal), then rub the tablet over the oil stain until enough foam has formed. You can also decompose the soap and put the resulting pieces on the stain, after moistening.

If detergent is used for colored garments, be sure to dilute it, or the detergent may stain the garment. For persistent oil stains on clothing, use a toothbrush that will help you attack oil stains better than with your hand.

Create soap scum, detergent or shampoo on top of the stain.
You should see it dissolve. Dishwashers or laundry soaps contain special agents that fight fat, the same as shampoo.

Rinse the area with water first, then (optionally) you can rinse with vinegar.
Vinegar is a natural cleansing agent that can be applied in different solutions. However, it reduces the alkalinity of soaps or detergents, making them less effective. So do not use detergents or soaps along with vinegar. If desired, mix a part of vinegar with two pates of water and soak the garment. Then, rinse the vinegar and use the detergent / shampoo / soap methods mentioned above.

Wash the garment alone, with washing detergent.

Follow the washing instructions on the garment label. When ready to dry, let the garment air dry. Drying the garment in a dryer can cause oil stains on clothes to remain permanently.

Repeat the steps if necessary.

Acne Aid Soap Bar for Acne and Oily Skin 100 grams

Why does soap remove dirt?

To wash well we not only need water, but also soap. Its use is very important since water alone does not remove dirt. But why the soap cleans?



Acne Aid Soap Bar for Acne and Oily Skin 100 grams

Its manufacturing method is called saponification, which consists of heating fats with the ashes of alkaline plants, which produces soap, water and glycerin. However, what gives soap its peculiar ability to cleanse the human body and clothes is the double personality of its molecules. While one end (hydrophobic) flees from the water and tends to bind to the fat, the other (hydrophilic) grabs the water releasing the fat.

The hydrophilic molecule is represented as a head similar to water, while the hydrophobic is like a long chain that runs away from it and clings to dirt. When the soap comes into contact with water, the long hydrophobic chains bind to the fat particles, while the hydrophilic heads project into the water. At the same time an emulsion like oil and water is produced, which means that the oil particles (dirt) are suspended in the water and are released from the skin or clothes. Once it is clear, the emulsion is removed.

In addition, for the soap to clean properly, the hydrophilic side must exert a greater force to be able to remove the dirt. The movement that occurs in the washing process, either by rubbing with the hand or spinning the machine, in addition to the use of hot water, promotes the detachment of the fat particles, so that they divide and end up dissolving. For this reason it is important to rub on all sides, since we guarantee that the washing will be better.

The effectiveness of the soap is reduced when the water contains large amounts of mineral salts, especially calcium and magnesium, since the contact of the soap with these causes an insoluble precipitate to form that gives the clothes a touch as if it had been starched Therefore, the softener is normally used.

How to remove lime stains from the toilet bowl

How to remove lime stains from the toilet bowl

If the water in your home is hard, you will notice a rough and whitish substance in your toilet bowl. This is accumulation of lime. The scale of lime results from the remaining deposits of hard water. The buildup of lime scale on the toilet bowl makes the toilet dirty and stained. You can remove lime scale from the toilet bowl with common household items.

Toilet Bowl Ring Remove Product

Instructions

1. Remove as much water as possible from the toilet bowl. Close the valve behind the toilet to stop the flow of water. Pull the chain a couple of times until the cup is empty.
2. Clean the inside of the toilet bowl with toilet cleaner. Apply a generous amount of cleaner and scrub the bowl with the toilet brush. This will make part of the lime stains come out but it probably will not remove everything. Throw a bucket of clean water into the bowl to rinse the cleaner.
3. Throw 1 gallon (3.78 l) of white vinegar into the toilet bowl. If this is not enough to cover all the lime deposits, wet paper towels and vinegar and place them on the lime stains. Leave the vinegar in the toilet bowl all night.
4. The next day, remove the paper towels. Use the brush to clean toilets and skirmish to remove lime deposits that have become loose. Clean the toilet by throwing a bucket of water into the toilet bowl. Inspect the toilet bowl to see if there is any lime stain.
5. Use borax powder if the spots do not come out. Spray a good amount of borax directly on the affected areas of the toilet bowl. Leave it for 30 minutes and then scrub with the toilet brush. Rinse the cup with a bucket or two of water.

Tips

• Chlorine bleach can also be used to remove limescale. Pour 1/2 cup of bleach into the toilet bowl or soak paper towels in bleach and place them on top of the lime stains. Leave the product on the spots several hours before scrubbing the cup and rinse it with water.
• Do not forget to reopen the water valve when you have finished cleaning.
• Use a toothbrush to clean toilets that has plastic bristles so the cup does not get scratched.
• Use rubber gloves when using bleach to protect your skin.

Warnings

Never mix chlorine bleach with ammonia or products that contain these ingredients since the result can be toxic.

You will need to

• Toilet cleaner
• Brush to clean the toilet
• pail
• Water
• 1 gallon (3.78 l) of white vinegar
• Paper towels
• Borax powder

How to clean a very stained toilet bowl

How to clean a very stained toilet bowl

Toilets require frequent cleaning for sanitary reasons. The accumulated debris particles produce unpleasant spots, while the minerals contained in the water produce a large accumulation of calcium in the toilet bowl. The longer stains remain, the more difficult it will be to eliminate them. The dirty cup encourages germs and other contaminants which creates an unhealthy environment. Some cleaning agents are effective in treating heavily soiled toilet bowls.

Toilet Bowl Ring Remove Product

Instructions

1. Rub the toilet bowl with a brush to remove accumulated dirt. Loosen stubborn stains as much as possible with the brush.
2. Moisten a paper towel with distilled white vinegar. Leave the paper towel directly on the difficult spots.
3. Pour a quart (946 ml) of white vinegar into the water in the toilet bowl. Keep the wet paper towel and the vinegar in the cup overnight.
4. Remove the paper towel from the toilet bowl. Rub the spots vigorously with the brush. Download the toilet.
5. Inspect the toilet bowl for any stains that have remained. If necessary, apply a commercial cleaner based on acid. Wear gloves and safety glasses to protect yourself against chemicals.
6. Rub the toilet bowl with the brush until all stains have disappeared. Unload the toilet when you have finished cleaning it.

Warnings

Follow the manufacturer's instructions on the commercial cleaner label for greater safety; Acid-based cleaners are corrosive if they come in contact with the skin. Do not mix other commercial products with this cleaner, dangerous chemical reactions can occur.

You will need to

• A brush for the toilet bowl
• Paper towels
• Distilled white vinegar
• A commercial cleaner for acid-based toilets
• Gloves
• Safety glasses

How to remove brown rings and stains from the toilet bowl

How to remove brown rings and stains from the toilet bowl

There is nothing less attractive in the bathroom than a dirty toilet. Even if you have cleaned the bathroom, hard water can leave a buildup of brown mineral deposits inside the toilet bowl, causing unsightly stains. Although there are commercial products available to eliminate brown rings and stains on the toilet, effective home remedies provide alternatives to chemical-laden products. Once the hard water spots are removed, it is important to keep the toilet bowl clean to prevent stains from coming back.

Toilet Bowl Ring Remove Product

Instructions

1. Pour 12 oz (354 ml) of glue into the stained toilet bowl and clean it in circles with a bath brush. Leave the glue in the toilet water for an hour to remove the mineral stains.
2. Unload the toilet to wash the glue and loosen the brown rings and spots. Scrub the sides to remove mineral deposits removed by the tail.
3. Add 1 cup of white vinegar to the toilet water to dissolve the rest of the stains. Sprinkle baking soda over the brush to add a mild abrasive.
4. Rub the surface of the toilet bowl with the brush covered in baking soda to remove the remaining stains. Discharge the toilet to rinse the surface.

Tips

• Add 1 cup of white vinegar to the toilet bowl every week and let it sit overnight to remove stains and freshen the toilet bowl.
• Substitute for lemon juice to remove spots of lime deposits and minerals inside the toilet.

You will need to

• 12 oz (354 ml) of cola drink
• A brush for toilet
• 1 cup of white vinegar
• Sodium bicarbonate