Showing posts with label Toilet Ring Remove. Show all posts
Showing posts with label Toilet Ring Remove. Show all posts

Wednesday, April 24, 2019

How to clean the toilet and remove tartar by 3 tricks

How to clean the toilet and remove tartar

If you want to know how to clean the toilet and remove the tartar effectively from inside this sanitary device ... Then, you have come to the website indicated here, we present a guide where it is clearly explained how to clean this sanitary device and In addition, we present some homemade tricks to remove the tartar from the inside of the toilet and thus, this sanitary device look clean, white and without those ugly yellow and brown spots that appear for example, as a dark halo at the water level or, in the interior of the toilet that makes it look very dirty and projects an unattractive image of the bathroom. Next, you can see the ways to clean a toilet and remove tartar .

Toilet Bowl Ring Remove Product


The first alternative or option to clean a toilet is of course, the traditional way and has many variants as people who do this cleaning but without doubt, has some core or fundamental things in the procedure. It should be noted that this cleaning should be done about once a week so that you have a clean toilet and thus, avoid the formation of unpleasant tartar stains that are impossible to remove from this method and you have to use other forms that we describe below. Then, I leave the traditional way.

They will need :

  • Toilet cleaning brush.
  • Rubber gloves.
  • Bleach and / or cleaning products.

Indications :

First, put on rubber gloves to avoid exposure or contact with surfaces and contaminated water.

Now, they will close the stopcock of the toilet that is usually behind this sanitary appliance and after doing this, they will throw the chain in this way, reduce the level of water and can work or clean to a better extent the interior of the toilet.

So now, they will take the bleach, bleach or product they use and pour it into the toilet trying to soak or wet the entire surface of it and to do it properly, throw it from the inside edge of the entire cup so that, run off by the wall at the bottom of the toilet and let it rest for at least 5 minutes.

In the meantime, they will take the cleaning brush and put some plastic bleach or cleaning product into the plastic bristles and begin scrubbing the inner concavity where the pond water is discharged.

After spending the time they have deemed appropriate for this work they will then begin to scrub the entire interior of the toilet with energy to remove all dirt.

Now, they will pour some more of the cleaning product they use inside the toilet and wait 10 to 15 minutes. Taking advantage of this time to clean the outside of the toilet with a rag and disinfectant, ie the lid, the seat, the backpack, the discharge button, the sides and practically all the external surface to remove any trace of dirt and Bad smell.

Well, now they will pick up the brush again and they will scrub again with vehemence or energy the inside of the toilet focusing on the places that were more machado or more difficult to access and finally, they will have a clean toilet with a pleasant smell.

By the way, if cleaning the toilet have not been able to remove some tartar then, it will be necessary to resort to some tricks or home remedies that we explain below ..

Trick # 1


When a traditional cleaning is not enough to clean a toilet and remove tartar stains then it is necessary to resort to some trick or home remedy that can help in this task and thus, have a clean toilet without tartar stains. One of these homemade tricks that works very well is precisely, to do a cleaning of toilet with vinegar that is, an element that in the majority of the homes this, review it with attention.

They will need :

  • Toilet cleaning brush.
  • Rubber gloves.
  • Half a liter of white vinegar or optionally, pink vinegar.

Indications :


Logically, the first thing to do is put on rubber gloves to avoid contact with the surface and contaminated water coming from the toilet.

Now, you should pour the white vinegar inside the toilet and for this to have a very good result, it is necessary to do it from the edge or part of the top of the cup trying to wet the whole surface from the top and in a movement circulate along the edge with such, to wet the entire interior surface of the toilet.

* Home trick attached | there is a very difficult part to clean inside the toilet and that is, that inner concavity where the water discharges into the bowl when the pond is pulled. Well, to carry out a cleaning there, there are 3 options that can be applied in this home trick and in the others:

1. Wet with the solution the fingers of the glove of a hand and with it to pass it there with so, that it is wet and damp.

2. Add part of the solution in a bottle with a system of pressurization (aerosol) and throw in that concavity that is in the entire inner ring.

3. Finally, with sections of toilet paper will make some rolls, wet them very well with the solution (soak) and put it without falling on the entire interior ring of discharge.

So now, we will proceed to wait a prudent and reasonable time for the solution of white vinegar (pH) to make a good effect and soften the scale embedded in the toilet. But how long do you have to wait? Well, if the toilet has almost no tartar or, apparently has no, maybe it's enough 20 or 30 minutes to cause the desired effect and in the case, that the interior of the toilet has a lot of yellow tartar and even brown then , it is advisable to wait at least 4 or 6 hours and in some cases, it is better to leave all night to make sure.

After the wait, the moment of truth arrives ... They will put on the gloves again and take the brush to pass it all over the inside of the toilet in a diligent, energetic and neat way to remove the tartar from the toilet correctly and be clean as pretend and if something has remained, you can repeat the operation with such, to remove the scale that has remained.

Finally, pull the chain of the pond in the bathroom so that all the tartar and dirt removed from the inside of the toilet go down the drain and then, they can disinfect everything with bleach or product they use to leave everything very clean.

Trick # 2


If they have a very dirty toilet and wish to remove all those ugly yellow and brown spots that are incrusting inside the toilet or WC then this solution or homemade trick can be the effective solution to this problem and thus, they can leave the toilet as new, clean and free of scale that inexorably appears and can not be removed with a simple cleaning or brushing of the area.

They will need :

  • Toilet cleaning brush.
  • Rubber gloves.
  • Half a liter of white vinegar.
  • Lemon juice.
  • Sodium bicarbonate.
  • Container.

Indications :

The first step is to place in a container the baking soda, the juice of a squeezed lemon and the half liter of white vinegar that is going to occupy and mix very well with some kind of spoon.

So now, they will put rubber gloves on so as to avoid possible splashes of contaminated water or contacts with dirty toilet surfaces.

Now, proceed to take the container and throw or pour much of the solution into the toilet trying to do so, cover or wet the entire surface throwing the compound well from the surface of the top of the toilet to this form runs off and all along the edge of it.

Well, with the part of the solution that is left in the container, it will proceed to wet that difficult art, which had already commented on the previous homemade trick with 3 possible options to do this, review it.

After doing the above, it will proceed to wait a reasonable time so that the solution created can generate the desired effect and that is, soften the tartar and descale it. The waiting time can be at least 2 hours but, people who are cautious and looking for a good effect expect more (may be, all night).

Well, after a while waiting time comes the time to clean and for this, take the cleaning brush and pass it all over the surface of the toilet, concavities, edges and bottom with such, to remove the tartar and surely, will be surprised how the tartar comes out easily from the inside of the toilet.

Finally, throw the chain and take advantage of disinfecting the toilet with bleach to have a clean bathroom and free of unwanted germs and bacteria.

Trick # 3


This homemade trick to be able to clean the toilet and thus, remove tartar is at least, something curious and picturesque because, to achieve this task you will need mainly one of the most known drinks, Coca Cola .. Yes, you have read Well, to clean and remove the tartar from the toilet, Coca Cola will be used and I will explain it to you so that you can do it and get out of this dirty inconvenience.

They will need :


  • Toilet cleaning brush.
  • Rubber gloves.
  • Half a liter of Coca Cola.

Indications :

The first thing they should do is open the Coca Cola and pour it into the toilet, worrying that the Coca Cola will wet the entire interior surface of the toilet from the edge of the upper part.

For the cleaning of the interior area where the pond water is discharged, we will use just one of the recommendations commented in the home trick # 1 to clean this part and using rubber gloves to protect yourself.

After soaking the entire interior of the toilet with Coca Cola, then let it rest for a couple of hours so that this way it has the desired effect and that is, soften the tartar on the surface of the toilet. By the way, the recommended waiting time is at least 1 hour but nevertheless, it is best to wait a while longer to ensure a good cleaning.

Now put on the rubber gloves and proceed then, to brush the entire interior surface of the toilet with the idea of ​​removing the plaque softened by Coca Cola and thus leave a clean bathroom as appropriate in the case that has not been All removed can repeat the operation or, use one of the home remedies to clean toilet described above.

After doing this, they can use a disinfectant product to finish cleaning the toilet and be free of germs and bacteria.

These are some of the interesting ways to clean the toilet and thus, remove the scale that accumulates inside this sanitary appliance and you, do you know another way to clean the toilet ?. Finally, we leave some items that can also help them protect and keep the bathroom clean.

Tuesday, April 23, 2019

How to clean the black mold in toilet bowls

How to clean the black mold in toilet bowls

If you see black spots on the toilet bowl, mold is likely to cause it. When stagnant water sits in the cup, mold can form. The black mold in the bathroom is unsightly and makes the bathroom look impure. The longer black mold is left untreated, the more it extends. The right cleaning products remove the black mold from the toilet bowl quickly and with little effort.

Toilet Bowl Ring Remove Product


Instructions

1 Sprinkle the borax on the toilet bowl to cover the mildew stains. If the mold is below the water line, drain the water first and then sprinkle on the borax.

2 Let the borax sit on the toilet during the night.

3 Mix a solution of 1/2 cup of borax and 1 gallon of water in a bucket. Dip a bath brush in the borax mixture and rub the mold stains on the toilet bowl until they are gone. Pull the chain to rinse.

4 Pour the chlorine bleach into the empty toilet bowl if the mold is still there. Let the bleach sit in the bowl for a few hours, then rub with a bath brush to remove the black mold. Pull the chain to rinse.

How to get rid of mold in the toilet bowl

How to get rid of mold in the toilet bowl

Toilets work as the perfect environment for mold growth. One of the reasons is its constant humidity, while the other is the natural presence of mold spores that are deposited on the surfaces of the toilet, including the bowl. When the bowl is not washed very often, the mold spores will lock in the bowl and grow. Fortunately, you can get rid of the mold and once again enjoy a clean toilet bowl.

Toilet Bowl Ring Remove Product


Instructions

The elimination of the Mold


1 Put on a pair of rubber gloves. Pour the bleach directly through a funnel into a spray bottle or squeeze the bottle.

2 spray or squeeze the bleach all the interior surfaces of the toilet bowl - especially those that show mold growth. Leave the bleach in the container overnight if possible. If not, leave it as long as you can.

3 Rub the inner tray with a bath brush to remove the mold.

Keep the mold away


4 Pour 1/4 cup of sodium borate into the toilet. Allow it to remain on the toilet overnight - or at least a couple of hours - without water, if possible.

5 scrub the toilet bowl with the cup brush before pulling the string to thoroughly clean all surfaces.

6 Repeat the sodium borate cleansing treatment on a weekly basis to maintain mold growth in the bay.

How to replace a wax ring in a toilet bowl

How to replace a wax ring in a toilet bowl

The wax ring that fits underneath a toilet provides a seal with the drain pipe, preventing leaks and sewer odors from entering the house. If your toilet moves from its original position on the floor, that seal likely breaks, requiring a replacement. The signs of a defective ring are when the toilet rounds back and forth like a rocking chair, water leaks from the base of the toilet after it is emptied, or if you notice constantly sewer odors in the bathroom.

Toilet Bowl Ring Remove Product


Instructions


1 Cut the water supply to the toilet by turning the stopcock completely to the right. Pull the chain, holding down the handle to allow as much water as possible to drain. Remove the tank lid and absorb the remaining water from the tank with a towel. Pushing the remaining water from the cup with a plunger.

2 Place the towel on the floor under the tank, where the water supply line connects to the tank. Remove the water supply line from the bottom of the tank, using an adjustable wrench. Remove the bolt caps on the base of the toilet and remove the nuts from the bolts, using the adjustable wrench.

3 Place a towel on the floor near the toilet. Straddle the toilet bowl and lift the toilet, placing both hands on the flat area behind and under the seat. Lift with your legs and not your back. Place the toilet face down on the towel. Place a rag on the open flange to prevent sewer gases from entering the room.

4 Scrape the old wax ring from the flange, using a small spatula. Scrape off the remaining wax from the bottom of the toilet. Clean the water and debris from the floor around the flange with a rag. Place the spare wax ring on the odorless horn or discharge outlet on the bottom of the container, and press it into place.

5 Remove the flange adjustment bolts and install two new screws. Install the screw heads in the flange slots and position the bolts approximately six inches apart and parallel to the wall behind the flange.

6 Turn the toilet upright and lift the toilet, to deposit it, on the flange. Make sure that the wax ring is connected with the flange and the adjustment bolts passes through the mounting holes in the bottom of the cup. Sit on the toilet and gently back and forth, with the weight of the body to crush the wax ring underneath. Install the adjusting bolts and washers. Tighten each nut evenly, with the adjustable wrench. Do not over tighten and damage the container. Fit the bolt caps into place.

7 Connect the water supply hose to the lower threaded part of the filling valve protruding from the bottom of the tank. Hand tighten the connecting nut and, using the wrench, tighten 1/2 turn more tightly by hand. Turn on the water supply and check for leaks around the toilet. Put the lid on the tank.

Tips and warnings

  •     Use a saw to cut the nuts of the adjustment bolts that anchor the toilet if you are able to remove the nuts with a wrench.

How to remove rust spots in a colored toilet bowl

How to remove rust spots in a colored toilet bowl

Rust stains on the toilet bowl often come from iron or manganese in the water supply or sometimes from old pipes. Colored toilet bowls do not hide these rust spots. Stains do not easily remove, but can be removed with acidic cleaners. Colored toilet bowls are usually colored vitrified porcelain mixed in porcelain. It will not damage the color with acidic cleaners, because the color is not just on the surface.

Toilet Bowl Ring Remove Product


Instructions

Vinegar

1 Saturate a paper towel with vinegar. Vinegar is acetic acid, a soft and safe product for the toilet bowl.

2 Place the paper towel over the rust stain. If the rust stain is below the water level, you may need to empty the toilet bowl, turning off the water on the back of the toilet and flushing. This does not remove all the water, but it will remove most of it to allow your paper towel to cling to the surface.

Place 3 more paper towels soaked in vinegar around the toilet bowl, where the rust stains show.

4 Leave the paper towels in place for a few hours.

5 Remove the paper towels and discard. Make paper towels do not flush down the toilet.

Lemonade Drink Mix

6 Wash the toilet to wet the sides.

7 Empty the toilet bowl if necessary to reach the rust spots. Close the water on the back and flush to do this.

8 Pour dry lemonade beverage mix into the wet surface of the toilet bowl, where the rust stains show.

9 Wait an hour or so for the acid to remove the rust.

10 Rub with a toothbrush to remove all residue and discoloration. Turn the water again and wash the toilet.

Oxalic acid

11 Buy a household cleaner with oxalic acid. Zud and Barkeeper's friend are two products that contain this acid, and both are in powder form.

12 Rinse the pot to wet the sides. Drain the toilet bowl if necessary to reach oxidation. Close the water at the bottom of the dresser and go to the drain.

13 Sprinkle the cleaner containing oxalic acid on the rust spots.

14 Wait 30 minutes for the acid to remove the rust.

15 Rub with a toothbrush to remove remaining rust spots. Turn the water again and wash the toilet.

Tips and warnings

  •     A paste of cream of tartar can clean the stains of rust, if you do not have other products.
  •     Do not use abrasive cleaners or scouring pads on the toilet bowl. Over time, this could damage the finish and allow the oxide to penetrate the surface.
  •     Do not mix different types of household cleaners.

How to clean mineral deposits from a toilet bowl

How to clean mineral deposits from a toilet bowl

Mineral deposits that are not taken care of in a timely manner can build over time and lead to a tedious project to clean. Deposits can be brown or rust-colored streaks or sections of light colors, visible on the toilet bowl. Recently, I had the pleasure of cleaning two bathrooms in an unoccupied rental unit with serious mineral deposits. If you are patient and present the effort, these deposits can be removed and the toilet can look like a brand new one.

Toilet Bowl Ring Remove Product


Instructions


1 After determining that you have mineral deposits and not normal dirt (ie, discoloration can not be removed with a conventional toilet cleaner and brush), remove as much water as possible from the bowl. This can be achieved either by removing water manually from the container with a cup or bowl, or by pulling the chain and preventing a water replenishment by cutting off the water valve.

2 Fill the toilet bowl with distilled white vinegar, covering the spots. Depending on the location of the deposits, this can take several cups or quart of vinegar. Leave the vinegar in the bowl overnight, making sure the toilet is "out of order" for family members (including pets !!). The acid in the vinegar should help loosen if the deposits do not dissolve over time. In the morning, use a bath brush to try to remove deposits. If you can not get everything removed, proceed to the next step. If everything looks clean, go to step 4.

3 Rinse the vinegar and refill the container with water. Put on your gloves, grab your pumice stone, and roll up your sleeves! Begin firmly to wash the deposits with the pumice stone, making sure that both the stone and the bowl are wet. Unfortunately, this really means working with your hands in the water. Continue to work on it - this could take some time to grind out of the deposits. You may wonder if the pumice will scratch the cup - if used wet, this should not be a problem since the pumice is softer than the composition of the toilet bowl. In fact, it is possible that the pumice stone may crumble a little as you work on the stains, and that you may have to reload the water if it becomes cloudy. Continue working until the spots are removed. Actually it took me about an hour each toilet (more frequent breaks), so do not give up!

4 When you are satisfied that the spots are gone, flush them again, and you're done! Be sure to periodically clean the toilet to prevent future accumulations.

Tips and warnings

  •     Mineral deposits can also form under the edge of the toilet, where water enters the toilet - be sure to check for deposits there.
  •     Pumice stones can sometimes be found in the cleaning supply sections of retail stores, but not many stock stores this article. Instead, look in the cosmetic / nail care sections for affordable pumice stones (which are also used in the removal of dead skin from the feet).
  •     There are more powerful acids available for serious problems. However, these acids can be very dangerous and require special handling. Look for muriatic acid (also called hydrochloric acid) for these difficult problems.

The elimination of accumulation of desquamation in toilet bowls

The elimination of accumulation of desquamation in toilet bowls

Cleaning the toilet bowl can be the least pleasant task of the home. Cleaning a toilet that has, hard yellow stains scale is even more of a chore. Toilets are made of porous material that traps calcium deposits and makes them difficult to remove. Acid cleaners such as gamma acid or cleaning chemicals made especially for scale removal are best for the job. You can buy these products in the home and garden stores.

Toilet Bowl Ring Remove Product


Instructions

1 Put on rubber gloves before handling chemical cleaning products.

2 Close the water in your toilet. Odorless until the water is removed from the toilet bowl.

3 Spray thick paper towels, with scale elimination cleaners until they become saturated. Line of toilet bowl with paper towels.

4 Leave the paper towels in the toilet bowl for two hours. Continue to spray the paper towels inside the toilet bowl every half hour.

5 Remove the paper towels after two hours and throw them away.

6 Wet a scrubbing brush and scrub loose scale spots.

7 Rinse the toilet bowl with a bowl of cold water. If the spots are still noticeable, repeat the procedure.

8 Wet a pumice stone and rub gently over the remaining spots.

9 Clean the toilet bowl with the toilet brush.

10 Open the water in the toilet. After the water fills the tank, so flush rinse the toilet bowl.

11 Clean the toilet bowl daily with the bath brush. Weekly cleaning with a toilet cleaner.

Tips and warnings

  •     Open a window in the bathroom or turn on the air outlet to prevent polluting gases.
  •     Be careful not to splash any cleaning product on your eyes when scrubbing the toilet bowl.

How to remove calcium buildup from a toilet bowl

How to remove calcium buildup from a toilet bowl

Calcium builds up in a toilet bowl when your home has hard water, meaning there is a high alkaline content in the water supply. As the water sits on the toilet bowl, these calcium deposits are deposited on the surface of the toilet bowl, causing the unattractive calcium buildup that is often not removable with the hygienic cleaning brush alone. Luckily, you can eliminate the accumulation by combining a few items from the low-cost home pantry.

Toilet Bowl Ring Remove Product


Instructions

1 Sprinkle a heavy baking powder with baking soda on a scrubbing brush and rub over the deposits. Sodium bicarbonate will provide a slightly abrasive texture plus a cleaning element that removes the freshest stains.

2 Pour 2 cups of vinegar into the toilet bowl, along with 1 cup of baking soda. The vinegar will dissolve these calcium deposits and the sodium bicarbonate adds an extra cleansing and deodorizing agent.

3 Place the lid on the toilet, and let it sit for an hour.

4 Scrub the toilet bowl with a toilet brush, and the calcium buildup will easily wipe away. The time gives enough time for the calcium accumulation to soften.

5 Pull the chain and allow it to be refilled with fresh water.

How to remove the accumulation of minerals in a toilet bowl

How to remove the accumulation of minerals in a toilet bowl

Toilets accumulate mineral buildup quickly, especially when your home has a hard water supply. The key to eliminating the buildup is the first to get rid of any existing residue, then apply a regular cleaning of the toilet bowl. By cleaning the container regularly, you will remove the same residue quickly as it develops, so it is imperceptible to the common eye. Instead of buying chemically based toilet bowl cleaning products, use inexpensive alternatives, such as vinegar and baking soda.

Toilet Bowl Ring Remove Product


Instructions

1 Pour 2 cups of white vinegar into the bowl along with 1 cup of baking soda. Let stand for 10 minutes.

2 scrub the toilet bowl with a brush for the toilet. In many cases, this will eliminate all accumulation. Download the bathroom.

3 Mix a paste of baking soda and vinegar by mixing 1 cup of baking soda and 1/4 cup of vinegar in a bowl.

4 Spread the paste over the accumulation zones and let stand for 30 minutes.

5 Scrub the toilet bowl again with the bath brush, and then pull the string.

Tips and warnings

  •     Pour 1 cup of vinegar and 1 cup of baking soda into the toilet bowl at least once a week, then rub the container with the bath brush to minimize mineral buildup.

How to remove lime from a toilet bowl

How to remove lime from a toilet bowl

If you have hard water, you may notice a crunchy, whitish substance in the toilet bowl. This is the accumulation of lime. Lime is the result of hard water deposits or waste. Formation of calcareous deposits in the toilet bowl makes the bathroom look impure and dirty. Removing calcareous deposits from a toilet bowl can be done using common household products.

Toilet Bowl Ring Remove Product


Instructions

1 Remove as much water from the toilet bowl as possible. Close the valve behind the toilet to stop the flow of water. Pull the chain a couple of times until the toilet bowl is empty.

2 Clean the inside of the toilet bowl with toilet bowl cleaners. Apply a generous amount of vacuum cleaner and scrub the container with a bath brush. This will eliminate some of the lime deposits, but probably not all. Dump a bucket of tap water into the container to rinse it after cleaning with the toilet cleaner.

3 Pour 1 gallon of white vinegar into the toilet bowl. If this is not enough to cover the lime deposits, soak paper towels with the vinegar and place them over the lime stains. Leave the vinegar in the toilet bowl overnight.

4 Remove the paper towels the next day. Use the bath brush to wash any loosened lime deposit. Pull the chain with a bucket of water. Inspect the toilet bowl to see if any of the lime stains remain.

5 Use borax powder if the lime stains persist. Sprinkle a generous amount of borax directly on the affected areas of the toilet bowl. Leave on for 30 minutes and then rub with the bath brush. Rinse the container with a spoon or two of water.

Tips and warnings

  •     Chlorine can also be used to remove limescale. Pour about 1/2 cup of chlorine into the toilet or take the paper towels in bleach and put them on top of the lime stains. Leave the bleach on the stains for several hours before scrubbing and washing the container with water.
  •     Do not forget to activate the water valve again when you have finished cleaning.
  •     Use a bath brush with plastic bristles so that the toilet bowl will not be scratched.
  •     Wear rubber gloves when working with chlorine to protect your skin.
  •     Never mix chlorine and ammonia or products that contain these ingredients. The results could be toxic.

How to clean copper stains in a toilet bowl

How to clean copper stains in a toilet bowl

Hard water increases the minerals' ability to stain bathroom surfaces. Acidic water increases the corrosion of copper pipes, which can leave a green or blue tinge on the porcelain. This can be noticeable in the toilet bowl, especially near the holes where water slips into the bowl. Weekly cleaning will prevent the accumulation of copper in a toilet bowl. If copper accumulates, however, it can remove copper stains.

Toilet Bowl Ring Remove Product


Instructions

1 Open a window or turn on the exhaust fan. Ammonia should only be used in a well-ventilated area.

2 Pour 1 cup of baking soda into the toilet bowl. Use a bath brush to mix the baking soda in the water and scrub the stains and under the rim of the toilet.

3 Thoroughly rinse the baking soda from the toilet by pulling the chain.

4 Pour 3 cups of ammonia into the toilet bowl.

5 Use the bath brush to mix the ammonia in the water and scrub under the edge and around the remaining spots.

6 Rinse the toilet bowl and pull the chain.

Tips and warnings

  •     The odorless week is washed with a mild natural abrasive, such as baking soda.
  •     Never mix ammonia with other cleaning products. Mixture of household chemicals can produce toxic chloramines. Always pull the chain to rinse the ammonia, as soon as you have finished cleaning the toilet.

Monday, April 22, 2019

Rust Cleaning Of a toilet bowl

Rust Cleaning Of a toilet bowl

Porcelain sinks and toilets can give a beautiful feeling, harvest to a bathroom. However, a vintage toilet can have the unsightly problem of stains and mineral deposits from years of use. Well water can also cause unattractive mineral deposits in porous porcelain. There are several methods and inexpensive products available to help clean rust from a stained toilet bowl.


Toilet Bowl Ring Remove Product


How to get rid of rust stains


Getting rid of the rust stains on the toilet bowl is simple with the right products and know-how. The amount of time it takes to get rid of rust stains will depend on the severity of the stain, what material your plate is and what product you are using. If a stain has been built over years, you may have to absorb or rub it for longer than the initial directions indicate, sometimes during the night. You may also have to reapply the product or method after the first time. Different products will work better in different materials, always check the warning labels of any product to know the restrictions of use and safety precautions that must be taken. Also, know that white vinegar and baking soda will not normally work in rust spots; Let the brew for other spots and spots of hard water.

One of the simplest ways to find a rust removal product is to ask a salesperson for a home improvement or hardware store. Or you could try one of the following methods that are said to be tried and true. Fine sandpaper or a pumice stone rubs gently over very difficult stains should rub them out without damaging your bowl. The abrasion of the paper or stone breaks the mineral particles (mold), bringing them to the surface to be eliminated. You can also try to remove the stain by applying a pile of table salt to the area and then pour the lemon juice over it; the juice of lemon and salt will absorb the oxide. Do not be afraid to leave the rye / lemon juice mixture in a long period of time; It can be left for hours if necessary. You will be able to see the absorption of rust by observing a change of color in the treatment.

There are products that exist purely for the removal of rust. CLR, acronym for calcium, lime and rust, is a chemical that will remove stains when applied. Read the label for instructions. Shaw Pads makes a product called Ecological toilet ring remover that does not use chemicals, just abrasion on the pad. Finally, there is pumice "scrubbing" sticks in the market. A pumice stone with a united wand that is intended to remove difficult stains from toilets. Even though the product is not expensive (around $ 9) a pumice stone alone does the same job.

How to remove rust from a toilet bowl

How to remove rust from a toilet bowl

The rust stains on a toilet bowl are mainly caused by water with a high iron content, and the problem occurs most often when you get water from such a system. Most household cleaners are usually not effective in removing porcelain oxide stains. Some cleaning products, particularly those that contain chlorine, can even make the problem worse. However, some common household ingredients can help eliminate rust from an easy and inexpensive toilet bowl.

Toilet Bowl Ring Remove Product



Instructions

1 Pour 1 to 2 cups of distilled white vinegar directly into the rusted toilet bowl. Let the vinegar hold for at least two hours, or overnight for very stubborn stains. Concentrated vinegar can disappear or even eliminate rust spots, according to the University of Florida IFAS.

2 Sprinkle with a layer of soft lemon drink mixture over the stained areas of the toilet bowl and in the water. Allow the powder to remain for at least an hour, then scrub with a bath brush and flush. The citric acid in the mixture neutralizes the oxide, says Linda Cobb in her book "Dirty Talk with the Queen of Cleanliness" (2004).

3 Pour 1 to 2 cups of bottled lemon juice into the rusted toilet bowl, and let it sit overnight. A natural, mild, lemon juice works similarly to white distilled vinegar to gently remove rust stains from porcelain toilet bowls. Scrub the container with a brush toilet the next day and flush.

4 Add two or three denture cleaning tablets to the toilet bowl, and allow them to stay overnight. The tablets effervescence when dropped in the water. Scrub the container with a brush toilet the next morning and flush. Repeat if necessary to remove the most difficult spots.

5 If other methods to remove stains fail, use a commercial rust remover made specifically for porcelain fixtures. Read the instructions on the label, and use the product according to the manufacturer's instructions to obtain the best results.

Tips and warnings


  •     Washing the toilet bowl with a pumice stone or steel wool can help loosen the rust.
  •     Do not use bleach to remove rust from the toilet bowl. Chlorine bleach establishes rust spots, explains Washington State University, which may be even more difficult to eliminate.

How to remove line pencil stains From a toilet bowl

How to remove line pencil stains From a toilet bowl

The marks of a pencil are made by graphite, which is insoluble and resistant to many of the stain removal procedures. However, you can remove pencil spots from a porous surface, such as a porcelain toilet bowl with simple household tools like an eraser and alcohol.

Toilet Bowl Ring Remove Product



Instructions

1 Remove any excess pencil marks with a soft eraser. A simple white nylon eraser, art eraser or rubber eraser will do it very well. They work especially well if the pencil spot is light and can remove the stain completely.

2 Apply a white toothpaste if the stain remains, and allow several hours for it to dry. Scrub the toothpaste dried using a toothbrush with water and wipe any remaining residue. Use a toothpaste instead of a clear gel.

3 Gently wipe the surface with a cloth or sponge moistened in hot, soapy water. Exfoliate in small circles to avoid contagion of the stain for a larger area of ​​the toilet bowl.

4 Check if the pencil stain is still there, and use a cloth or sponge to apply rubbing alcohol, dry cleaning solvent based on citrus or stain remover if so.

5 Rinse the area thoroughly with water from a spray bottle or damp cloth, and use a sponge to clean the bowl of the dry toilet.

Tips and warnings

  •     The success of stain removal depends on the length of time the stain has been set and the types of extraction procedures used before.
  •     If a combination of eraser and alcohol does not do the trick, try other stain removal solutions such as toothpaste, white vinegar, a solution of sodium bicarbonate with water, ammonia or household detergents. Apply the solution to the stain and rub gently with a cloth or sponge to pull the pencil stain off.
  •     For difficult pencil stains in a slightly colored toilet bowl, you can also wipe off some hydrogen peroxide with a white cloth and rinse with water a few hours later. The hydrogen peroxide acts as a mild bleach to clean the stain.

How to remove water spots from a toilet bowl

How to remove water spots from a toilet bowl

Stains can appear inside a toilet bowl on the sides and bottom of the container due to the minerals found in the water. When neglected, these spots can get worse over time, and even become extremely difficult to remove. Water spots found inside a toilet bowl can be even harder to remove if the stains are on the bottom of the bowl, where there is always water.

Toilet Bowl Ring Remove Product



Instructions

1 Turn the toilet bowl shutoff valve (the valve under the toilet bowl) clockwise until it can no longer be turned. Rinse the toilet bowl, and then submerge if necessary in order to remove all the water from the bowl.

2 Pour or sprinkle undiluted white vinegar over the water spots found in the toilet bowl. Leave the white vinegar inside the toilet bowl for 10 to 15 minutes.

3 Moisten the bristles of the toilet brush with hot water from the tap.

4 Scrub the areas of the toilet bowl covered by water spots. Scrub harder in places where there are more spots.

5 Pour or spray tap water into the toilet bowl to rinse it. Then rinse the toilet brush with water from the washing tap, and scrub the inside of the toilet bowl one more time.

6 Repeat steps 2 to 5 until the water spots are no longer visible. Turn the shutoff valve on the toilet bowl back to "On" and rinse to rinse the container one more time.

Tips and warnings

  •     If water spots are found near the bottom of the toilet bowl, you can also pour a couple of cups of undiluted white vinegar into the toilet after you have turned off the toilet's shut-off valve. Leave the vinegar inside the toilet overnight, then scrub with a wet toilet brush the next morning.

How to remove lime scale from a toilet bowl

How to remove lime scale from a toilet bowl

Lime builds up in areas of the house, where water stagnates, such as the toilet bowl. This is especially a problem in homes that have a supply of hard water that contains a high mineral content, as lime is even more present and stains the toilet bowl much more quickly. To remove the lime, you must use a cleaning mixture that dissolves the buildup without causing damage to the toilet bowl or piping system.

Toilet Bowl Ring Remove Product



Instructions

1 Pour 2 cups of white vinegar into the toilet, put on the toilet lid and let the vinegar loosen the lime buildup for an hour.

2 Scrub lime stain the toilet bowl with the brush, and pull the chain.

3 Mix 1 cup of borax and 1 cup of vinegar in a disposable container with a disposable spoon until a paste forms.

4 Smear the paste on the spots of lime residues with the spoon, and discard both the plate and spoon, as borax is harmful if swallowed.

5 Let the paste sit on the stains of the toilet bowl overnight, scrub the lime with a bath brush and empty the toilet bowl.

How to get rid of a brown ring in a toilet bowl

How to get rid of a brown ring in a toilet bowl

A brown ring often develops around the top of the water line in the toilet bowl, as that is where the hard water residue, lime, dirt and other elements end up forming and creating the stain. To get rid of the toilet bowl ring, you want to use ingredients that directly attack the accumulation without using much physical effort. You also want to stay away from the harmful chemical ingredients that are dangerous to the home and the environment.

Toilet Bowl Ring Remove Product



Instructions

1 Pour 2 cups of baking soda into the toilet bowl and scrub the ring with your bath brush. Often, this will eliminate the light toilet rings.

2 Fill a spray bottle with white vinegar, and spray it heavily around the ring of the toilet bowl. Let the vinegar sit for about 30 minutes.

3 Scrub the toilet bowl again with your toilet brush and pull the chain.

4 Repeat as necessary to remove any remaining toilet bowl ring.

How to remove iron stains a toilet bowl

How to remove iron stains a toilet bowl

The rust stains that build up inside the toilet bowl come from the iron and natural mineral components found in hard water, although even water softened over time can cause stains. Iron accumulates in the porcelain of the toilet bowl and oxidizes when exposed to air. The simplest way to avoid the accumulation of rust in toilets is to scrub the container regularly with a cleaning bath; However, once there is an accumulation, it is still relatively easy to remove.

Toilet Bowl Ring Remove Product



Instructions

1 Put on rubber gloves and open the bathroom windows, if possible, for ventilation.

2 Drain the water from the toilet. If necessary, scoop the water from the toilet bowl with an old cup and dump it in a bucket.

3 Add the bathroom cleaner to the bowl, following the manufacturer's instructions.

4 Scrub like this, using the bathroom brush.

5 Wipe up any spatters immediately with old rags. Bathroom cleaner can damage or lye bathroom carpets, tiles or accessories.

6 Pull the chain several times to rinse after scrubbing.

Tips and warnings

  •     If you have chemical sensitivities, use a mask to protect your nose and mouth during cleansing.
  •     Never combine any of the bleach products with bathroom cleaners that contain hydrochloric acid. In combination, they release toxic vapors. If a toilet tank cleaner containing bleach is used, remove and discharge several times to rinse the toilet before cleaning.
  •     Wash the skin immediately with clean, cold water, if you get any cleanser by itself.

How to remove blue rings from a toilet bowl

How to remove blue rings from a toilet bowl

Blue rings in the toilet bowl are usually caused by deposits of minerals that are present in the water. Copper is the common culprit of blue or greenish stains. These stains can make your toilet to be old and dirty. Fortunately, there is no need to live with these unpleasant looking spots. With a few common household items and a little hard work, you can remove the blue rings and restore the look of the toilet bowl.

Toilet Bowl Ring Remove Product

Instructions

1 Pull the chain and allow the container to fill with clean water.

2 Pour 2 to 3 cups of white vinegar into the toilet bowl. Rub the toilet bowl with the mixture of water and vinegar and a toilet washer. Allow the vinegar to sit in the bowl for 20 minutes.

3 Scrub the toilet bowl once more with the water and vinegar mixture and an odorless scrubber. Pull the chain and allow the container to fill with clean water.

4 Pour 2 cups of ammonia into the toilet bowl. Scrub the blue rings with the ammonia-water mixture and a toilet scrubber. Let the mixture sit in the container for 15 minutes.

5 Scrub cleans the toilet bowl with the ammonia-water mixture and the scrubber. Scrub until the blue rings are no longer visible. If necessary, allow the ammonia-water mixture to sit for an extended period of time.

6 Pull the chain to rinse the container. Let it fill with clean water.

7 Clean toilet bowl every week with white vinegar or a commercial toilet cleaner.

Tips and warnings


  •     Alternatively, empty as much water as possible and scrub the blue rings with a wet pumice stone.
  •     Never mix ammonia with chlorine or products that contain chlorine. The resulting vapors are toxic.

Sunday, April 21, 2019

How to remove lime stains from the toilet bowl

How to remove lime stains from the toilet bowl

If the water in your home is hard, you will notice a rough and whitish substance in your toilet bowl. This is accumulation of lime. The scale of lime results from the remaining deposits of hard water. The buildup of lime scale on the toilet bowl makes the toilet dirty and stained. You can remove lime scale from the toilet bowl with common household items.

Toilet Bowl Ring Remove Product

Instructions

  1. Remove as much water as possible from the toilet bowl. Close the valve behind the toilet to stop the flow of water. Pull the chain a couple of times until the cup is empty.
  2. Clean the inside of the toilet bowl with toilet cleaner. Apply a generous amount of cleaner and scrub the bowl with the toilet brush. This will make part of the lime stains come out but it probably will not remove everything. Throw a bucket of clean water into the bowl to rinse the cleaner.
  3. Throw 1 gallon (3.78 l) of white vinegar into the toilet bowl. If this is not enough to cover all the lime deposits, wet paper towels and vinegar and place them on the lime stains. Leave the vinegar in the toilet bowl all night.
  4. The next day, remove the paper towels. Use the brush to clean toilets and skirmish to remove lime deposits that have become loose. Clean the toilet by throwing a bucket of water into the toilet bowl. Inspect the toilet bowl to see if there is any lime stain.
  5. Use borax powder if the spots do not come out. Spray a good amount of borax directly on the affected areas of the toilet bowl. Leave it for 30 minutes and then scrub with the toilet brush. Rinse the cup with a bucket or two of water.

Tips

  • Chlorine bleach can also be used to remove limescale. Pour 1/2 cup of bleach into the toilet bowl or soak paper towels in bleach and place them on top of the lime stains. Leave the product on the spots several hours before scrubbing the cup and rinse it with water.
  • Do not forget to reopen the water valve when you have finished cleaning.
  • Use a toothbrush to clean toilets that has plastic bristles so the cup does not get scratched.
  • Use rubber gloves when using bleach to protect your skin.

Warnings

Never mix chlorine bleach with ammonia or products that contain these ingredients since the result can be toxic.

You will need to

  • Toilet cleaner
  • Brush to clean the toilet
  • pail
  • Water
  • 1 gallon (3.78 l) of white vinegar
  • Paper towels
  • Borax powder