Clorox Automatic Toilet Bowl Cleaner Tablet - 3.5 Ounce, 6 Pack

How to clean the toilet from lime and urinary stone at home?

During operation, no matter how accurately its rules are observed, the inner surface of the toilet bowl is covered with bloom, which is based on mineral salts. Accumulating on the surface, such a bloom, whose color varies from light yellow to dark brown, not only spoils the appearance of the entire device, but also causes an unpleasant smell to spread. In addition, if you do not take any measures to clean the toilet from limescale, then, having grown, it can cause a decrease in the lumen of the drain of the device, which will lead to a deterioration in its performance.
Getting rid of plaque on the inner surfaces of the toilet bowl, for which you can use both special compositions and proven folk remedies, does not take much time and effort in those cases, if you do it immediately after its detection, without taking the situation to extremes.

Causes of sediment
Stone in the toilet, as it is often called, appears as a result of the deposition of minerals on its walls contained in the composition of any, even filtered water. Even if the toilet is cleared of mineral deposits, they will reappear with time, and such a process will be more intense the more often the surface of the device will be in contact with water from the drain tank. The most common reasons for the active formation of plaque on the inner walls of the toilet bowl are:

Leaking drain tank, from which water is constantly poured on the toilet wall. In such cases, plaque on the surface of the device is formed in the form of unsightly brown strips running from the point of water leaving the cistern to the toilet drain hole.
On the inner surface of the sanitary device there are microcracks and roughness, on which mineral deposits accumulate.
The toilet is often used to drain food into it. Contacts of the toilet bowl surface with hot food residues are especially undesirable, since cracks may form on such a temperature effect.
Thus, in order to spend time as little as possible on the cardinal cleaning of the toilet bowl from mineral deposits on its walls, it is sufficient to regularly maintain the cleanliness of such a device and monitor its technical condition, as well as follow the rules for operating such devices.
Cleaning with improvised and folk remedies
Clean the toilet from limescale, especially if its internal surface is not heavily polluted by it, you can use improvised means. The use of such means, some of which are able to cope even with old sediments, allows not only to save money on the acquisition of fairly expensive special compositions, but also to ensure the maintenance of the toilet bowl in proper hygienic condition.
Lemon acid
Such an inexpensive and widely available remedy, like citric acid, can be used both for cleaning limescale and urinary stone from the inner surface of the toilet bowl, as well as for removing mineral deposits from the walls of the drain tank. The process of cleaning the elements of the sanitary device using this tool is as follows:

All water is removed from the toilet bowl and its drain hole.
The surfaces on which there are mineral deposits are moistened with a wet cloth, after which citric acid powder is poured onto them. It is also necessary to pour lemongrass into the drain hole of the device, since there is necessarily a lime scale on its walls.
After half an hour, all cleaned surfaces are treated with a brush, and then thoroughly washed with clean water.
Acetic acid
With the help of table vinegar, which is based on acid, it is possible to remove limescale and rust from the surface of the toilet bowl, urinal, and sink. Since the acid content in such a tool is low, it can even be used to take care of sanitary devices connected to the sewage system through plastic pipes.
To clean the plumbing with table vinegar, proceed as follows:
All the water in them is removed from the drain holes of the sanitary devices, and their cleaned surfaces are wiped dry. To free the drain holes from the water, in such cases, you can use a plastic cup or rag.
Contaminated surfaces that need to be cleaned are wiped with a cloth moistened with vinegar.
The toilet lid is closed and left in this state for 5-6 hours. It is best to leave the toilet-treated toilet overnight so that all the mineral deposits present on its inner surface can dissolve better.
After the above time, the cleaned surfaces of the device are treated with a brush, and then washed with water several times.
Oxalic acid
One of the most popular tools used for cleaning plumbing from lime and urinary stone is oxalic acid, which is inexpensive and is sold in many hardware stores. The algorithm for applying such an agent, which is a white crystalline powder, is as follows:

The walls of the device to be cleaned are moistened with a wet cloth, after which oxalic acid powder is applied to them, for which you can also use a cloth. If you also need to clean the walls of the drain hole from limescale and urinary stone, then the acid is poured into it.
After 15-20 minutes, the places of pollution are treated with a brush, after which they are washed several times with water, blowing it out of the device’s drain cistern.
You can repeat the procedure described above several times if the contamination on the walls of the plumbing fixture is too large and is not removed after a single application of oxalic acid.
Baking soda
To help get rid of plaque on the walls of the toilet, if it is not very old, can the usual baking soda. When used as a cleansing agent, soda is poured onto the pre-moistened places of dirt, wait for a while, and then the surface is treated with a brush and washed several times with water from a drain tank. In order to make the result of using soda as a cleansing agent more impressive, it can be used together with vinegar, which is done as follows:
Vinegar, using lockable dishes, heated to a temperature of 500, then add soda to it.
The resulting solution is poured into contaminated places and left on them for some time.
The surface to be cleaned is treated with a brush, and then washed with water. After performing this procedure, the surface of the toilet can be further cleaned with clean soda to fix the result.
Coca Cola
Remarkably, such popular beverages as Coca-Cola, Sprite and Fanta can also be used to clean toilet walls from limescale and rust. Such properties of these drinks are explained by the fact that they contain citric acid, which acts as a decomposition on such contaminants.

The process of cleaning plumbing using popular carbonated drinks is as follows:
2-3 bottles of aerated drink containing citric acid are poured into the toilet bowl that was previously freed of water. Pour a drink should also be the walls of the device and the space under its rim.
After waiting for 2-3 hours, the surface to be cleaned is treated with a brush, then washed with clean water.
Chemistry on guard of purity
Today there is a large variety of chemical products on sale, with which you can effectively remove mineral deposits from the surface of sanitary devices. Among themselves, such tools differ in both chemical composition and application features, which must be considered when choosing them.
Orthophosphoric acid
Phosphoric acid, which is mainly sold in automotive stores, copes well with the removal of lime and urinary stone, but it does not adversely affect the rubber and plastic elements of sanitary devices and sewer systems.
To perform cleaning with orthophosphoric acid, it is treated with contaminated places, then close the lid of the toilet bowl, wait about 15 minutes, then wash the cleaned surface with plenty of water from the drain tank.
To enhance the effect of the use of this tool, particularly contaminated places can be further treated with a brush.
Hydrochloric acid
Apply hydrochloric acid, which is a powerful cleaning agent, it makes sense in cases where mineral deposits on the walls of the toilet and in its drain hole are long-standing in nature. You can not use this tool in cases where the toilet is connected to the sewer system through plastic pipes and fittings, which from the interaction with such a strong acid can simply become useless.

To clean the toilet bowl with hydrochloric acid, it must be mixed with water in equal proportions, pour the resulting solution into the bowl of the device to be cleaned and its drain hole, wait 10 minutes, then wash the plumbing with a large amount of clean water.
Bleach
Bleaching powder is one of the most traditional means by which you can not only clean the plumbing device from the old raid on its surfaces, but also effectively disinfect it, destroying most of the harmful organisms. Cleaning plumbing using this tool is performed in the following sequence:
a package of chlorine is poured into the bowl of the device and left in it for the night;
The cleaned surface is treated with a brush and washed with plenty of clean water.
Cleaning powders and pastes
The most popular powder products specifically designed for cleaning toilet bowls and other plumbing devices are Pemolux and Komet. Such means are most effective in dry form, therefore, before using them, the plumbing device must be wiped dry and all the water must be removed from its inside.
After the completion of the preparatory procedures, the powder is poured onto the contaminated surface, it is kept on it for some time, after which, using a brush, a stiff brush or a sponge, they begin to perform the cleaning process itself. After cleaning, the plumbing surface should be washed with plenty of clean water.

For cleaning toilet bowls from limescale, you can use special pastes, which, in addition to the active substance, corrodes mineral deposits, include abrasive particles. The principle of using such pastes is quite simple: they are applied to the contaminated surface with a sponge, wait for some time, and then begin cleaning, practically rubbing off the surface of the device mechanically.
Liquids and gels
The efficiency of using special fluids and gels for cleaning toilet bowls is explained by the fact that chlorine (Domestos, Whiteness, etc.) or acid (Toilet Duckling, Bref, etc.) form the basis of the majority of such products. Gels are more effective and convenient in use, because at the expense of their thick consistency, they flow more slowly along the walls of the toilet bowl to be cleaned, respectively, affect the surface longer, dissolving the impurities present on it.
Both liquid and gel cleansing agents use the same principle, which is as follows:
means put on the polluted surface;
give it time to dissolve lime;
scrub residues with a brush or a hard sponge;
perform a thorough flushing of the device.
Most of the above listed chemical cleaners are highly toxic, so when using them you should take care to protect the skin, eyes and respiratory system.
Preventive control measures
Not to be in situations where the surface of the toilet bowl needs to be cleaned of mineral deposits, or to be in them as rarely as possible, can help preventive measures to combat such pollution, which are as follows:
Regular, performed at intervals of at least once every two weeks, cleaning the device with the use of gentle means - special liquids and gels. The frequency with which it is necessary to perform such a procedure is determined by the number of regular users of this sanitary device.
At each sink, if there is a need for this, you should use a brush to clean the surface of the device from the impurities formed on it.
Do not allow leakage of the tank, timely carry out its repair and adjustment.
Use special tablets placed in the drain tank of the device, and gel blocks, fixed under its rim.


38A-------xx

Optimal 12 Count Automatic Toilet Bowl Cleaner Tablets, Bleach & Blue (3 Packs)

How to clean the toilet from lime?

The toilet provides a comfortable life in any apartment, but if it is used for a long time, a lime deposit may occur on it. He does not appear in one day. The raid does not harm human health, but will look very ugly. It is necessary to understand in detail how to clean the toilet from limescale, using methods available to all.
Causes

Even if you often flush the water in the toilet, there may appear limescale. The main reason is organic chemistry. If the surface is rough, the deposit there accumulates quickly enough. Of course, urea remains, but there are fewer such traces. It is from the flowing water that lime comes to the surface, which interacts with the urine and as a result remains inside as a bloom.

If people often flush behind themselves after using the toilet, a lot of water passes through the toilet and pollution appears very quickly. The situation is complicated in cases where there are problems with the cistern. Water flows constantly, which leads to a strong plaque. Of course, the liquid is filtered, because it gets into the tank from the faucet. However, lime has very small components that penetrate through the filters without any problems. These components are so small that they cannot be seen, but they can accumulate and create problems.
Fundamental rules

To clean the plumbing was as efficient as possible, you should consider certain rules. Otherwise, you can even damage the surface or damage your health. The rules are as follows:

remove all water from the toilet bowl beforehand. It can be drawn using a disposable plastic glass. Then drain the bottom with a rag;
since many detergents are dangerous to mucous membranes, it is recommended to use a respirator and goggles;
plumbing should be cleaned with rubber gloves. Thanks to them, the skin of your hands will be protected from aggressive detergents. Of course, hygiene is also important, because the toilet is far from the cleanest place in the house;

after applying liquid products to the surface, you need to leave them for some time (to find out exactly how long you have to wait, carefully read the instructions);
After preparing the plumbing, use the selected tool. Just pouring the powder on the surface will not be enough. It is recommended to use a stiff brush or brush (however, the cleaning tool should not be made of metal, otherwise you may damage the enamel).

It is necessary to thoroughly clean the surface, especially those places where there is too much of a raid. If necessary, add more powder in the process. When finished cleaning, flush water several times.

What to buy?

To effectively clean the plumbing, prepare the following:

brush, brush;
powder, cleaning gel;
rubber gloves;
fairly tough sponge;
plunger;
eye protection goggles, respirator.

Facilities

You can wipe off old traces using the following tools:

iodine;
hydrochloric acid;
citric acid, acetic acid;
electrolyte;
baking soda;
special means.

You can prepare a mixture of the following ingredients:

pharmacy iodine;
baking soda;
apple, nine percent table vinegar.

Vinegar

Take vinegar (200 ml) and heat it to 50 degrees. To do this, use a closed container. Add also iodine and baking soda. Completely empty the toilet from the liquid and pour the mixture there. Then you need to close it and wait about 12 hours (some leave so the plumbing for the night). Then clean the plumbing using a brush and rinse the surface with water. If there are a lot of traces, repeat the procedure.

It is also possible to apply pure vinegar to the surface . Immediately rub the treated area using a brush on a long handle or a brush.
Electrolyte

If limescale appeared long ago, to wash it, you can use the electrolyte. It contains acid, characterized by increased concentration. During work with this tool, you must use gloves, respirator, goggles. It should be very careful to pour the liquid into the toilet, so as not to splash. The tool should be on the plumbing from half an hour to an hour, not longer (the period depends on how many traces on the surface).

This tool can only be used if the pipes are made of steel. If they are plastic, you need to choose another cleaning method.

Lemon acid

To remove traces from the plumbing, clean the surface with citric acid. Enough two small packages. The same amount of money needed for a tank of water. Make sure that the liquid is not poured into the bowl of the toilet bowl.
Carbonated drinks

Today, many remove limescale by using carbonated beverages. Pour three liters of such liquid into the toilet and wait a few hours. After adding detergent, take a brush and rub the surface.
Iodine monochloride

Almost any sediment in the toilet can be removed at home using iodine monochloride. Such a solution can be purchased at a veterinary pharmacy. It is necessary to apply the product to the surface and after a while wash it with water.

This option is not suitable for sewer pipes made of aluminum or cast iron.

Household chemicals

At present, a variety of cleaning products are available to consumers: liquids, gels, creams, powders. They differ from each other in the main components. The following options are possible:

alkali;
acids;
chlorine.

Chlorine products are usually used for regular cleaning. With their help, you can disinfect and wash the plumbing equipment all the time - and not be afraid that it will deteriorate. The main disadvantage of chlorine products is an unpleasant smell, but it disappears rather quickly.

Acids can be used to remove traces that are already quite old.

Means consist of potent acids: oxalic, phosphoric, hydrochloric, formic. They should not be used too often. It is recommended not to forget about caution.

If you constantly clean plumbing with acids, the surface may deteriorate: they erode faience and ceramics. If you are going to use powder, be sure to read the instructions for use.

Oxalic acid powder can be used in one of two ways. You can mix the powder with water, pour it out and close the lid. Wait for about an hour and rinse the surface with water, get rid of any residue of the bloom with a brush. Another option is to slightly moisten a soft cloth, pour powder on it and treat the plumbing.

You can use hydrochloric acid and not oxalic acid. Having completely removed the water, pour the acid into the bowl. Close the toilet and wait 15 minutes, then rinse the surface with running water. For plastic pipes, this option is not suitable, and for steel it is possible to use one of the above acids.

Liquid alkaline solutions can be used without fear that the plumbing will be damaged. With their help, various contaminants are removed from the surface and they are disinfected. Alkaline means very well remove organic fats that clog sewer pipes, plumbing.
Varieties

Powder products help to cope with dry contaminations very well. If you are going to use them, carefully drain the drain pipe and bowl. Pre-read the instructions. For application you can use a brush or a hard sponge. It is better not to use metal products, otherwise the surface may be deformed.

Special gels and creams appeared not very long ago, but quickly became very popular. Such means allow to achieve very good results - and at the same time they are soft, do not damage the surface. It is easy to use them, you only need to take into account the recommendations that are listed in the instructions. Gels and creams can be designed for certain actions (combating certain impurities, regular cleaning) or universal.

Immediately understand that it is better to choose for cleaning plumbing in a particular case, it does not always work. To determine the most appropriate option, you need to use different gels, creams, powders or improvised means. So, you can compare the results and choose the best option.
Prevent re-occurrence

Of course, it is always better to prevent the occurrence of a problem than to deal with it. If you want to avoid limescale, do not forget about the following recommendations:

put wet wipes close to the toilet, it is very convenient to clean the outside part and the seat with their help. However, they should not be flushed away, otherwise you may encounter such a problem as blockage;
You can purchase effective tools or special pills, with which you can easily and quickly remove traces. They will get rid of lime and prevent the appearance of new layers;
repair the tank in time, so you will save on water and prevent the appearance of unsightly traces;
if necessary, remember to use a brush;
use a special non-aggressive means to clean the surface; exercise it every week, at least. The frequency depends on the number of people living in the apartment.

Clean the toilet from urinary stone and lime scale regularly. So, you not only can prevent the occurrence of an unpleasant odor in the room, but also achieve a neat appearance of plumbing. Regular meticulous processing of plumbing will ensure that various harmful bacteria do not breed.

And now we recommend to watch the video in which the housewife will tell a simple way to clean the toilet.


37A-------xx

12 Pieces Antibacterial Blue Automatic Toilet Bowl Bathroom Cleaner Tablets NEW VERSION - lasts up to 36 weeks to 48 weeks

How to clean the toilet from limescale by various means

The funny expression “toilet - the face of the hostess” is quite true, because clean, sparkling plumbing is an indispensable condition for order in the house. No matter how fashionable and expensive the repairs in the bathroom are, the yellow stains on the white faience look extremely untidy. Of course, this item needs daily care. But even in this case, over time, a layer of limescale will appear on the toilet, which is difficult to remove. Consider how to clean the toilet from limescale, using household chemicals or improvised means.

Household chemicals

In any supermarket there is at least a small assortment of care products for plumbing. They can be of several types:

Abrasive. For example, “Pemolux”, well known to older generations. First you need to scoop water from the toilet with a disposable plastic cup. Then evenly distribute the powder from the inside over the entire area and rub with a cloth until white. The disadvantage of this method is in great effort. In addition, abrasives scratch the faience surface, and in the future it on the contrary contributes to the formation of limescale.

how to clean the toilet

Alkaline. Such cleaning fluids, both expensive “Domestos” and cheap “Whiteness”, are made on the basis of sodium hypochlorite (the so-called “bleach”), which is capable of dissolving pollution. First, again, we scoop out the water, squeeze the gel onto the walls, leave it for 30 minutes and wash it off, rubbing it with a little brush for toilet bowls or a soft washcloth. This method, how to clean lime deposits, is the easiest, since there is no need to "scrub", chemistry will do everything itself.
Acidic. In "Sillite", "Utenka" and the like, oxalic, acetic, hydrochloric acids or their mixtures are responsible for combating lime. The principle of operation and technology of use are similar to alkaline.

Important! Be sure to read the instructions and wear rubber gloves when working. Be careful not to lean too close to the surface to be treated in order to avoid harmful substances on the skin and inhaling fumes. Do not use the compounds on a different basis at the same time - poisonous vapors are formed when mixed.

The decision in favor of chemistry, to clean the toilet, has its drawbacks. Effective means are expensive, in addition, almost all of them are toxic, have a pungent odor and are not suitable for frequent use, if the family has young children or are allergic. There is a risk that the baby will take a bright gel for something tasty if you forget to remove the bottles under the lock or at the moment when the solution is already applied. For the sake of child safety, it is better not to keep anything toxic in the apartment at all.

how to clean the toilet from lime scale
Folk methods

If you have difficulty with a choice, do not want to use it, or want to save money, you can try to clean the limescale with the help of ordinary kitchen products. You will need:

Table vinegar. One glass (250 ml) of 9% vinegar is heated in a microwave oven to a temperature of 40 degrees, add two teaspoons of soda. The resulting solution is applied to the dried surface of the toilet, close and leave overnight, and in the morning it is enough to clean everything with a brush and wash it off.
Baking soda. The same thing is done as in the previous paragraph, but instead of the vinegar mixture, sprinkle soda abundantly on the contaminated sites.
Lemon acid. Distribute the contents of two bags over the entire interior, after draining the toilet. Leave for three hours under the lid. During this time, limescale should dissolve. If not, repeat the procedure.
Coca-Cola or Sprite. After family holidays, often there are extra bottles of these drinks. They contain the same citric acid, so the "cola" can be used just like the usual tools for cleaning. This simple method is suitable for allergies and safe for children. We fill in several liters inside, and in half an hour it is possible to wash off.


36A-------xx

2000 Flushes 208086 Blue Plus Bleach Antibacterial Automatic Toilet Bowl Cleaner 3.5 OZ Twin Pack (Pack of 1)

How to clean the toilet from rust

Many housewives try to achieve sterile cleanliness in rooms such as a bathroom and toilet. Rust can ruin the impression of even the most seemingly clean bathroom. Rust is found in tap water and is an insoluble impurity. It gradually forms plaque on surfaces in contact with running water. At first, a slightly visible yellow bloom appears, then the color becomes more saturated.
In the end, if the toilet or sink does not wash, the surface will be completely covered with rust. It should not be brought to such a state, because rust can and must be fought.

Cleaning plumbing
For many people, tidying up the plumbing in the house is not a problem, because the shops sell all kinds of household chemicals, as they say, for every budget. As a rule, in the fight against rust help the same household chemicals designed to remove limescale. Abrasive cleaners are effective and affordable, but stains are washed only after a good job.
Powdered products can scratch the surface of the toilet bowl, which will cause rust in the future.

Alkaline household chemicals, for example "Domestos" are considered to be more common. It is quite simple to use it, it is necessary to put quite a bit of substance on the contaminated area and leave it for some time, after which you should flush the water. Alkali, which is part of, removes rust stains well and does not damage the surface of the toilet bowl, and also has bactericidal properties. It should be noted that with strong pollution this method of cleaning is ineffective.
Acidic remedies are used in a similar way. They easily remove rust, but are also aggressive, so you should wear gloves when handling them.
Folk methods in the fight against rust

Ardent opponents of household chemicals cope with ugly drips as follows.


Organic acids, such as acetic, oxalic and citric, are used. It is very easy to remove rust, you just need to cover the problem areas with a cloth dipped in a solution and leave for some time.
Similarly, you can wash plumbing with inorganic acid.
Such well-known drinks like Coca-Cola, Fanta, or Sprite help to get rid of rust on plumbing fixtures. Pour the liter of a drink down the toilet and leave for one hour. When flushing, these drinks remove even fatty solutions that form on the walls of sewer pipes.
If the stains are not old, then toothpaste will help to cope with them. Enough 4 centimeters of paste to get rid of rust, albeit briefly.
Calcium and peroxide is in every home, they can be used to clean rust in a matter of minutes.
At home, baking soda, citric acid and vinegar are suitable for cleaning the toilet bowl and cistern. They cope with possible pollution not worse than the well-known household chemicals.

How to clean the toilet from rust and the reasons for its appearance
For a start, it is advisable to consider the possible causes of this problem.
To prevent the formation of yellow stripes on the toilet is within the power of any person. It is worth paying attention to the following nuances.
Water should not go to the duct, most likely the problem lies in the drain tank. In most cases, this is an easily removable problem; simply pushing the float lever located in the tank. But, in some cases, it is necessary to seek the help of a specialist or independently change the valve.
Another reason is old rusty pipes. In new homes there are no such problems, but in old residential premises it is advisable to change the rusty pipes to new, more modern ones.
The surface roughness contributes to the accumulation of particles of rust, limescale and urinary stone. When choosing plumbing better to prefer porcelain or earthenware.
Preventive measures, performed regularly, will keep the toilet and other sanitary facilities in the house clean. With such work special tablets cope, which should be placed in the toilet bowl. They gradually dissolve in water and prevent possible contamination.
Some tips on "How to clean the toilet from pollution"
It is necessary to clean the toilet with hand movements from top to bottom. If you do the opposite, the water in the toilet will be dirty, which contributes to the transfer of bacteria to already clean surfaces. Finish washing the toilet should be cleaning the outer surface and do not forget about the tank.
Oddly enough, effective is considered to be a glass cleaner. This method of cleaning the toilet is rather the final stage. Inside, the toilet should be flushed with clean water, and the outer walls and cistern should be wiped with a dry cloth.
These simple tools and rules will keep the bathroom and toilet clean and tidy. Sterility can be achieved, the main thing is to make every effort and the result will not keep you waiting for a long time.


35A-------xx

Lysol Click Gel Automatic Toilet Bowl Cleaner, Lavender, 4ct

The best cleaning products for the toilet

The toilet room and its cleanliness - this is what is the best way to say about the accuracy of the hostess of the apartment. On the modern market there is a rich assortment of all kinds of substances that easily remove plaque and give neatness and gloss to the bathroom. Toilet bowl cleaners triumph over germs and clean the faience surface. In addition, they greatly facilitate cleaning, making it simple, but quite effective.
The main types of pollution toilet bowls
Depending on the type of pollution, you must use the appropriate detergents.
Giving the toilet cleanliness is the primary task, which is not too difficult to realize. It is important to regularly pay attention to this accessory, otherwise you can wait for such a situation when the dirt is densely injected, and it will be incredibly difficult to get rid of it.
It should be noted that usually the following contaminants appear on the surface of the toilet bowl, which must be cleaned by the housewives:
lime scurf that occurs when tap water has a high salt content and high levels of hardness. To combat it you need to use toilet cleaners that contain alkaline substances;
rust may occur in the case when the pipes through which water flows to the bathroom are not new and clean. Acid can handle it;
Domestic pollution that is deposited on the surface is removed with substances called surfactants;
the bad smell that breeding bacteria cause is quickly and easily removed by bleach, as a rule, it contains most of these products. In addition, they contain fragrances that perfectly mask any fragrance.

Gel is an economical and easy-to-use toilet cleaner.
It is worth noting that to combat the pollution of sanitary products such substances and means are used:
Chemically active, which pretty quickly tidy up the toilet bowl surface:
gel: perfectly applied to the surface of the toilet, moreover, its structure allows, slowly spreading, to take with it all the germs and bacteria. As a rule, for the convenience of applying such substances a bottle is used with a spout that is bent at a certain angle, which allows you to direct the flow of funds even to hard-to-reach places;
liquid: less economical means that quickly drains into the water;
powder: you have to constantly rub into the walls of the product, seeking their purification. Therefore, they are not very convenient for cleaning;
cream: gently removes plaque without damaging the surface of the earthenware. Unfortunately, manual application deprives him of consumer popularity.
Preventive, the main task of which is to prevent pollution:


tablets, washers or cubes that need to be attached to the toilet so that the drained water passes through them, ensuring the release of detergent and refreshing particles;
Magnetic rings, which must be installed directly in the drain tank. They have a high cost, but at the same time effectively dissolve pollution.
Folk remedies that have not the worst ability to deal with unpleasant phenomena:
soda;
vinegar.
Choosing a tool that helps effectively bring cleanliness in the bathroom, you should, first of all, pay attention to the most economical, which, moreover, can be used without much effort.
The best tool for cleaning the toilet

Acid or alkali in the composition of the cleanser helps to get rid of rust.
Any woman who manages the household is faced with the need to make a decision and choose the best toilet cleaner that removes plaque and gives the entire room the smell of freshness and cleanliness.
It should be noted that the correctly chosen cleaner copes with such problems:
removes impurities that appear during the operation of the product;
dissolves limescale;
removes rust marks on the surface;
disinfects the toilet.
To achieve the goals in the composition of the cleansing substance are the following ingredients:
Surfactants that combat organic pollution and are necessary for high-quality toilet bowl cleaning. As a rule, the safest species is considered to be non-ionic.
Acid or alkaline compounds that allow the dissolution of rust molecules, as well as plaque, which is quite often formed on the walls of the product. It should be noted that it is necessary to handle them with extreme caution so as not to get burned hands or mucous membranes.
Chlorine compounds that allow you to destroy bacteria and sanitize the bathroom.
To date, the most popular, and, therefore, effective, are considered such brands:
Cillit Bang. This toilet cleaner is created in the form of a gel, which makes its application simple and convenient. In addition, the tank is equipped with a spout that allows you to bring the substance to the most inaccessible places.

This gel contains hydrochloric acid, which dissolves and removes all contaminants, including rust. However, they must be worn when wearing gloves to prevent chemical burns.
The advantages of using Cillit Bang gel can be noted:
high efficiency;
minimum level of expenditure;
ergonomic packaging facilitates application.
Disadvantages of Cillit Bang Gel:
not the lowest price;
the tool is not equipped with a lid that children could not open.
Domestos. This tool for toilet bowls is also created in the form of a gel, which perfectly copes with quite complex types of contaminants. The acid which is in its structure perfectly dissolves rusty spots, and also fungi and bacteria.

This gel has important advantages:
its consistency is rather viscous and viscous, which makes it possible to evenly distribute it over the entire surface of the toilet bowl;
the lowest possible consumption of the substance with effective cleansing;
equipped with protection against opening by children.
Minuses:
presence of persistent and pungent odor.
"Comet 7 days of purity." This gel has the ability to keep cleanliness in the plumbing under control for a whole week. As the manufacturer notes, it is enough to apply it once, after which he copes with maintaining order for 7 days. The tool works due to sulfuric acid, which is in its composition.

Be sure to emphasize the following advantages:
the ability to remove any contamination;
low consumption with high efficiency;
small price;
prolonged protection plumbing;
a lid that children cannot open.
Disadvantages of cleaning agent:
quite a strong smell of chloride component.
"Toilet duckling". A gel that works on the basis of hydrochloric acid, thereby combating persistent stains.

It may be noted its advantages:
the presence of a spout that allows you to apply a tool under the bezel;
pleasant aroma;
affordable price;
effective fight against bacteria;
protective cap.
Disadvantages:
medium consistency, because of which the tool is consumed fairly quickly.
Sanox Ultra. A fairly good drug, it is produced by a domestic factory, which determines its low cost, and the effectiveness does not suffer from this at all. The active ingredient removes rust and plaque well, and it smells pretty good.

Advantages of "Sanoks Ultra":
low price;
effective work;
the presence of fragrances.
Disadvantages means:
not too thick texture;
packaging that does not have protection from children and a bent nose.
We clean the toilet with folk remedies

In the hardware stores there are various means for cleaning toilet bowls, which have differences not only in their cost, but also in their level of efficiency. Nevertheless, each hostess is quite capable of cleaning the plumbing, using the available folk remedies that are found in the house.
The most popular in the fight for the purity of the toilet recognized such methods:

Vinegar. The most common and gives excellent results due to the fact that it is an acid. Apply it as follows:
apply on walls and leave to affect for a period of from 20 to 30 minutes;
wash off with plenty of water.
Soda. Well washes deposits and plaque due to its abrasiveness. It should be applied to the walls of earthenware. In addition, it has an important ability to clean sewage.
Lemon acid. Allows you to clean the surface of the toilet bowl easily and simply. It is enough to apply it to the surface, after which it will be possible to get rid of both the annoyed plaque and the majority of microbes.
White. It contains chlorine and works great in cleaning the toilet. It must be applied in the evening to the substance worked throughout the night. After that, wash off the composition with water and not worry about the presence of bacteria.
DIY Toilet Cleaner


Craftsmen have long developed their own toilet cleaner, which with the maximum degree of efficiency can cope with various problems, including bacteria, dirt, plaque and unpleasant odor, while there are very few. In addition, such a substance will be as safe as possible for people living in the house, especially if they have all sorts of allergies, and pets.
How to cook it? You need to take some essential oils, vinegar, starch and salt. If the components are selected in the right quantity, you can hope to create a tool that will perfectly cope with all the problems of plumbing and caring for it.
Creating a toilet cleaner includes the following steps:
Put 3 teaspoons of coarse salt in a bowl and mix them with 3 tablespoons of starch.
Add to the resulting mixture 1/2 cup of water, then mix everything thoroughly.
Put the bowl on the stove and cook until thick, without ceasing to thoroughly knead its contents.
Remove the container from the heat and add 15 ml of vinegar and a little ethereal smell with any aroma.
The mixture will be very thick, now you can make a ball out of it, which you need to leave for the night, then attach it to the toilet using wire or other improvised objects.
This completely simple procedure for preparing a toilet cleaner can make the owners happy with an excellent result with minimal cash outlay.
Read more:
How to remove the urinary stone in the toilet folk remedies
Than to clean the toilet from rust and plaque with his own hands
How to clean the sewer at home
How to clean the toilet from clogging
How to clean the toilet from limescale
In conclusion, it should be emphasized that with a modern range of products in hardware stores that offer a wide selection of various cleaning products, it will not be difficult to clean the toilet. Nevertheless, keeping it clean regularly minimizes labor and costs, and also saves comfort in the home and the health of its inhabitants.


34A-------xx

Scrubbing Bubbles Toilet Gel, Rainshower (2 dispensers + 30 Gel Discs)

How easy it is to clean the toilet from clogging

Everyone can face an unexpected problem of stagnation in the toilet. Delay the repair of plumbing is not worth it. Consider the signs and causes of congestion in the toilet and learn how to remove the blockage in the toilet with your own hands.
Understand that the toilet is defective by the following features:
dirty water after draining does not completely leave the toilet;
unpleasant odors appeared in the toilet;
when draining, the water fills the toilet bowl by about half;
the water goes very slowly down the drain.

In the case when at least one of the listed signs is present in your toilet, it is safe to say that it is clogged and you need to clean the drain.
Causes clogging toilet
Foreign objects got into the toilet. For example, at the same time a large amount of toilet paper was flushed or the toilet was clogged with cat litter.
Improper installation of plumbing equipment.
Errors manufacturer in the manufacture of the toilet. Poor design of the sewer system.
The toilet does not have the necessary valves or a funnel.
What to do first

When the toilet is jammed, you need to call the emergency service and call the plumber to clean the plumbing equipment and sewage system with the help of professional equipment.
Or try to eliminate the blockage in the toilet yourself with your own hands.
We clean the clogged toilet using a plunger

Eliminating the mash with a plunger is related to the mechanical method and is suitable for removing the plug. If you assume that a foreign object (children's toy, rag) is in the toilet, it is better to remove it before you start working with the plunger.
You can get items wearing rubber gloves. Otherwise there is a risk to push the garbage further along the pipe and block the operation of the sewage system. Vantuz - an effective remedy for clogging the toilet.
Before starting, close all drain holes (bathtub, sink).
Place the plunger in the toilet drain hole. Pour five to six liters of water on top so that the rubber part of the plunger is completely covered.
Pump the plunger at least ten times up and down. Movement should be sharp, but uniform. If the water goes, then everything is done correctly.
We eliminate the clog of the toilet with a plastic bottle

Quickly get rid of a blockage in the toilet can be improvised. For example, using an ordinary plastic bottle with a cut-off bottom and tightly twisted cap.
The device must be carefully and slowly put into the drain.
As soon as you feel that the air is pushing the bottle back, press it sharply until the very end of the drain hole. After that, with a sharp movement remove the bottle from the drain.
The water will go away and the mash will disappear if the procedure is repeated two or three times.

We clean the toilet with a solution of soda and vinegar

Vinegar and soda will help to break through uncomplicated blockages in the toilet. You should not apply this method of cleaning if the corrugation (the connection of the toilet bowl and the pipe) is made of plastic. Hot water with soda and vinegar can spoil the thin plastic.
With the help of vinegar and soda, you can quickly and effectively clean the toilet from such contaminants as fat plug and food residue.
Take half a pack of baking soda and pour it into the drain hole.
Prepare one glass of vinegar and pour it into the toilet bowl.
Wait half an hour and pour 3-5 liters of boiling water into the drain.
Night cleaning toilet soda

Soda can clean the toilet and sewer system.
In the evening, pour a pack of baking soda into the toilet.
Fill the toilet bowl with boiling water.
Cap the drain using a stopper or wet cloth.
In the morning, rinse the drain with hot water.
How to break a blockage with a cable

The use of a special sewer cable will help to quickly and efficiently get rid of the blockage. It is better to work together.
Prepare unnecessary rags, oilcloth, bucket or basin with water and dishwashing detergent.
Roll the oilcloth over the floor and cover the walls.
Lower the end of the cable into the drain hole and slowly move it down with a rotating motion.
After the cable has rested and does not go further move it back and forth.
Pull the cable down to the oilcloth. Clean with a cloth moistened with dishwashing liquid to remove unpleasant odors.
What to do if the toilet is clogged with paper or cat litter

It is better to remove the stopper from the contents of cat litter or tamped toilet paper using a plunger. Before cleaning the toilet bowl, it is recommended to take out the garbage with gloved hands and pour five to ten liters of boiling water into the toilet bowl. Hot liquid partially dissolve contamination.
Remove the mash with sandbags.

With the help of a bag filled with sand it is possible to pierce the mash formed in the drain.
Tie a sandbag tightly and tie a strong rope to it.
Dip the bag in the drain, dropping all the water out of the tank. At the same time, release the tied rope so that the water carries the bag into the drain hole.
Pull the pouch out of the hole in the toilet bowl with a sharp movement.
After the tank is refilled, repeat the procedure.
We use chemicals

In the case when you did not manage to remove the mash in the toilet using gentle methods, you will have to use chemicals.
When using this or that tool for cleaning the toilet, be sure to follow the manufacturer's instructions. Depending on which pipes in the toilet (plastic or metal), choose a suitable tool.
If the above folk methods did not help to eliminate the stagnation in the toilet at all, immediately contact a specialist!
Read more:
Toilet bowl cleaners
How to clean the toilet from lime scale
How to clean the bathroom pipe at home
How to clean the toilet from rust
How to clean the urinary stone toilet at home
Tips

Do not throw foreign objects, household waste or food residue into the sink.
It is not recommended to throw used paper into the toilet.
Do not drain the water with floating debris in it.
Use prophylactic agents to prevent congestion.
Replace old, rusty pipes in time.


33A-------xx

Lysol Click Gel Automatic Toilet Bowl Cleaner, Ocean Fresh, 4ct

Getting rid of limescale in the toilet

Probably, each of us faced with such a problem as limescale in the toilet. It is not easy to remove it, especially if it has already managed to enter the enamel surface.
There are ways to help you get rid of the problem and to keep the whiteness of the plumbing for a long time.
Means for removing limescale in the toilet
Liquid toilet cleaners are easy to use.
In our apartments comes not too clean water. The raid, which settles on the walls of the toilet, can inform you that the water in the aqueduct is very hard or rust has appeared on the pipes.
Most often, in the fight against lime deposits use special tools, a huge range of which is presented in hardware stores. Cleaning compositions are of the following types:
Abrasive detergents (powders). It is difficult enough to clean the toilet to shine, they have to spend a lot of time and effort on it. In addition, solid particles damage the enameled plumbing surface, it will become rough, and the patina will appear much faster. It is better to use powders less often or not to use them.
Alkali based detergents. Such a composition will remove urinary stone deposits in case they have appeared recently; it is more difficult to dissolve old contaminants with an alkaline agent. To clean the surface of the substance should be applied for a long time, preferably at night, then the effect will be much better.
Acidic formulations. Such a tool is more effective than alkali or abrasive, and copes well even with long-standing bloom. And you can also use the acid in its pure form, for example, hydrochloric and orthophosphoric. They are suitable to remove the most ingrained lime scale on the toilet. Remember that hydrochloric acid destroys plastic and rubber, and if the sewer pipes in your house are made of these materials, this method should be discarded.
Acid is the most aggressive, but also the most effective remedy against lime scale.
For effective cleaning, you will need to pour 1/2 cup of acid into the toilet and wait 10 minutes, and then flush the chemical with water from the tank.
Put the gloves on before using the limescale on the toilet with acids. This will protect you from chemical burns.
Chlorine based products. Such compositions perfectly cope not only with bloom on the walls of the toilet, but also disinfect the surface. The action of the substance is quite gentle, it does not spoil the enamel, after the chlorine-based products no roughness or scratches are formed. But they have one major drawback - a very sharp and heavy smell, after such processing it is almost impossible to enter the toilet for some time, you have to wait until the room is ventilated, and when cleaning it is better to protect the respiratory organs with a medical mask.
Liquid battery electrolyte. It is an excellent tool to combat any sediment. It is a mixture made from distilled water and sulfuric acid. In order to get rid of deposits with its help, it is enough to apply the agent on the surface and hold for 10 minutes. Then you need to clean the toilet brush and rinse with water. But it should be remembered that sulfuric acid is a very caustic substance, therefore, this method of cleaning should be applied only in extreme cases, and all possible precautions should be observed.
When working with purchased products is very important to follow the instructions for use. Otherwise, you risk damaging the enamelled plumbing surface.
Basic rules of work

Any tool must first be applied to the surface of the toilet, and wait a certain time.
To effectively perform the cleaning of plumbing, and not to damage it at the same time, as well as not to damage your health, you must adhere to the following rules:
Wear rubber gloves before cleaning the toilet to remove limescale. This is necessary in order to protect your hands from aggressive cleaning products with which you will work. And, of course, for reasons of hygiene, since the toilet is not the cleanest place in the apartment, and you should not touch it with your “bare” hands.
It is advisable to wear protective goggles and a respirator, since many detergents can corrode the mucous membranes.
Before you remove plaque, you need to scoop all the water from the toilet. This can be done using a disposable plastic cup, and dry the bottom with a cloth.
Before cleaning the toilet bowl it is necessary to remove water from it.
After the toilet is ready for use, use the tool you have chosen. If it is a scouring powder it is not enough just to put it on the walls of the toilet bowl. You will need to apply a brush or a stiff brush (but not metal, so as not to spoil the enamel). Intensively clean the walls, paying special attention to the places where there is a strong patina. If necessary, pour in the process of working fresh powder. Then flush the toilet several times.
If you have chosen a liquid agent, apply it on the walls and leave it for several hours (for usage time, see the instructions for the cleaning composition). Since a liquid agent has the ability to flow along the walls, it will have to be applied repeatedly.
If you follow all the subtleties of cleaning, you can easily get rid of plaque and lime deposits.
Home remedies for lime scale in the toilet

If you do not have special formulations, the question arises, how can you clean the toilet from limescale with the help of folk remedies. They are good because they are always at hand and relatively inexpensive, and if the pollution is not very strong and old, they can handle it no worse than the store supplies.
What else can clean the toilet from lime? Try one of these tools.
Lemon acid



This substance effectively fights against such sediments, which have not yet managed to “firmly” settle on the walls of the toilet bowl.
In order to clean the toilet using citric acid, you need to take 3-4 sachets of powder, put on the places you want to clean, and leave for 5-6 hours, and even better - overnight. Then you need to carefully treat the surface with a brush and rinse the toilet, rinse the water several times. Perhaps, to achieve the desired effect, the procedure will have to be repeated.
Acetic acid


Vinegar acts on the same principle as the "lemon". To clean the toilet you need 250 grams of 9% of the composition, heated in a sealed container to 45-50 degrees. Pour the product into the toilet (for best effect, you can add 3 teaspoons of baking soda to vinegar). Close the lid and leave overnight.
In the morning, clean the walls with a brush and rinse off the product by flushing the toilet several times.
Oxalic acid

Recently, the tool is undeservedly forgotten, and it can be found less and less in hardware stores. However, oxalic acid is very good at combating pollution, and can easily restore the whiteness of your toilet bowl.
In order to clean off the plaque, abundantly apply the substance on the wall of the toilet, paying particular attention to the most contaminated areas. After cleaning the toilet brush and rinse the acid with water.
Baking soda


This product is in the kitchen of any hostess, it is considered to be a multifunctional tool. Soda perfectly dissolves mineral deposits, as well as disinfects the surface, and it can be used both in pure form and as an enhancer of the action of citric and acetic acids.
To clean the walls of plaque with soda, you need a whole pack of powder. Treat the toilet and leave overnight. In the morning you will only need to clean the walls with a brush and rinse off the soda with water.
Coca Cola


To get rid of plaque in the toilet will help Coca-Cola, this is an unusual, but very effective method of purification. In soda there are acidity regulators such as citric and orthophosphoric acids, this explains the ability of cola to dissolve deposits.
How to get rid of plaque using this drink? Just pour it overnight in the toilet, it is better to take a 2-liter bottle. In the morning, wash the soda with water from the tank, if necessary, perform additional cleaning with a brush.
Cleaning the toilet - not the most pleasant homework. But with regular care, your plumbing will always remain perfectly clean and snow-white.
Read more:
How to clean the toilet at home from clogging
How to clean the urinary stone toilet at home
How to clean the toilet from rust
The best cleaning products for the toilet
Preventing limescale

Special tools for a toilet bowl prevent lime scale deposits.
In order to prevent the formation of a strong raid, the following measures should be taken:
Ensure that the water from the flush cistern is not constantly flowing down the toilet. This will prevent the formation of limescale and, importantly, reduce water consumption.
Do not throw leftover food into the toilet. This can cause the formation of plaque on its walls, as well as blockage in the pipes.
Use purchased means for the prevention of plaque, today in the shops you can find such substances that are added directly to the tank. And there are also devices that are attached under the rim of the toilet bowl, and emit cleaning fluid with each flush of water.
Dispose of dirt regularly. After each use, clean the bowl with a brush.
Following these rules, you will be much less likely to think about how to remove plaque from the plumbing surface.


32A-------xx

Scrubbing Bubbles Fresh Gel Toilet Cleaning Stamp, Citrus, Dispenser with 6 Stamps

How to eliminate clogs in the sink in the kitchen or in the bathroom

The situation when the water from the sink does not go to the drain is not new. She will not take you by surprise if you prepare in advance. To decide what to do to quickly remove the problem at home, you will be prompted by experts and those who have repeatedly encountered it. Having received proven advice over the years on how to eliminate clogging in the sink, you will not get lost when faced with such a situation, as you will know exactly how to act.

Causes of shell clogging
The drainage system in the houses consists of pipes of small diameter, so they easily accumulate debris, dirt and grease, forming a plug that prevents the passage of water. The drain in the kitchen sink is blocked for the following reasons:
fatty deposits
leftover food
garbage.
The situation when the water does not leave the sink often has other reasons:
hair,
animal hair,
a pile of clothes
sor.
Why there is a blockage in the sink sink, we figured out, now we will determine what to do to get rid of it. There are several ways to choose from. Which one of them to try in practice first is up to you.
Removing a blockage with a plunger


To pierce a cork formed with the help of a plunger is the first thing that comes to mind when such a problem arises. The action plan is as follows:
Fill the sink half with water (preferably hot).
Cover the lower wide part of the plunger drain hole.
We press on the handle of the plunger with a force of two or three times.
This method works in such a way that pressure is created in the pipe and a strong stream of water is sent to the drain, which washes the litter. It is possible to clean the clogged sink with a plunger in most cases, but not in all. What to do if the method did not work, you will be prompted by the following tips.
Mechanical siphon cleaning

If the sink clogged, try to unscrew the siphon and clean it with a rag and water.
You can do it in another way: pour hot water into it and shake it in your hands, having previously closed the hole on one side with cellophane. At the same time, flush the corrugated plastic pipe to clean the sink to the end.
Pipe cleaning with a metal cable

How to eliminate clogging in the sink with a metal cable, every plumber knows. You can clean the drain yourself at home if you own such a tool and know how to use it.
It is necessary to run the end of the cable into the hole of the pipe under the corrugated pipe and gently push it deep into the blockage.
Turning the control handle cable will help him easier to pass in places bending pipes.
Increase the pressure on the tool when it hits the stopper. Perform with this rotational movement of the handle.
Experts recommend not to stop at this, and push the cable as far as possible so that the blockage does not remain in the pipe. The destruction of a traffic jam is the main goal to be achieved.
Folk remedies: soda, vinegar, boiling water


Pipe cleaning with folk remedies is a popular way to eliminate the clogging of a sink without a plunger and cable. Try to do it with soda and vinegar, which you will probably find in the house. This composition eats away fat, so it is often recommended to use it if the sink in the kitchen is clogged.
Pour 3 tablespoons of soda into the drain and then pour a glass of vinegar into it. After that, wait 10–15 minutes for a chemical reaction to occur between the soda and vinegar. Together with the soda, try pouring or pouring the same amount of dishwashing liquid or laundry detergent into the sink.
Another way to remove blockage in the sink sink with improvised means is boiling water. To enhance the effectiveness of the first is to fall asleep in the drain two or three spoons of soda. Pour water into the drain and wait 3–4 minutes for the pipe to clear. Water after such a cleaning always goes to the drain as it should, if the main reason for clogging the sink was the accumulation of fat.
Cleaning pipes with special means

In the case of an unsuccessful attempt to remove the blockage using soda with vinegar or hot water, try using a tool specifically designed to combat blockages in the pipes.
In the department of household chemicals you will find a wide range of such compounds: "Mr. Muskul", "Mole", "Tiret", "Flup", "Bagi Pothan". With their help, you can quickly clean the drain at home.
But if the water does not go away because of a bundle of hair or wool, then against such clogging of the sink such a tool is useless.

Chemical means for cleaning the drain pipes are aggressive. They have a damaging effect on the rubber gasket and the pipes themselves (especially plastic). Therefore, they are recommended to use only in extreme cases.
Before you clean the clog in the sink using household chemicals, carefully read the instructions. The correct procedure is indicated by the manufacturer on the packaging. There you will find information about how long after pouring funds into the drain you need to flush the pipes with a stream of clean cold water.
Do not exceed the recommended period of exposure, as this can seriously damage the drain system.
Now you know that if the sink is clogged at home, the problem can be solved without causing plumbing. Before taking action, think carefully about what caused the blockage. A plug of hair, wool, food, or debris will help eliminate mechanical cleaning.
Read more:
Means for clearing pipe blockages
What to do if the toilet is clogged
Toilet Cleaners
How to break a pipe at home
What to do if the kitchen sink is clogged
Soda vinegar, boiling water or special household chemicals destroy the accumulation of grease and dirt in the pipes that prevent water from passing freely. If none of these methods helped to clean the sink at home, call the plumber.


31A-------xx

Soft Scrub 4-in-1 Toilet Care, Sapphire Waters, 50 Gram

How to clean the toilet from plaque and rust

A good housewife bathroom always shines with cleanliness. However, despite all efforts, the inner surface of the toilet can periodically become stained and rust.
Why is this happening? Often the cause is corrosion of metal parts of the sewer system, as a result of which rusty particles settle on the white surface of the toilet bowl. And it also happens that the works are new, but the point is the quality of water.
How to clean the toilet from rust? What kind of gel or powder to use? Is it possible to solve the problem with the help of available tools? How to clean complex dirt? The answers to these questions will be given below.
How to clean the toilet from rust at home

How to remove rust from the toilet? Regardless of what means you are going to use, you must follow the rules of cleaning:
Before you start work, remove the water from their toilet bowl. It can be just scooped up, and the remains wet with a piece of cloth.
Distribute the cleaner evenly over the surface, paying particular attention to problem areas.
Do not use the cleaned toilet for 8–10 hours to allow chemicals to dissolve contamination.
Carefully wipe off any plaque and rusty stains with a brush.
Rinse the water several times to remove the cleaning agent from the surface without a trace.
Follow a simple rule: cleaning the toilet from rust should be done regularly, until it “ingrained” into the material.
How to wash the rust in the toilet

How to clean the rust from the toilet at home? To restore cleanliness in the bathroom, you can use a number of inexpensive tools that each hostess has. Traditional methods are not inferior in efficiency to publicized household chemicals, and are safer.

Hydrogen peroxide and ammonia

The method is effective with a slight rust plaque. You need a solution of ammonia and peroxide, prepared in a ratio of 1: 5. The resulting tool is applied to stains and drips for half an hour, after which it is necessary to remove rust from the toilet brush. Then take a few times to flush the water.
Vinegar

This method is suitable for "point" effects. How to flush the toilet in this way? Moisten a piece of soft cloth in vinegar in vinegar and place a cloth on the stain. After 1–2 hours, when the acid corrodes rust, remove any residual contamination with a brush and flush.
Acetic Essence or Citric Acid

With these tools, you can effectively clean the toilet, and remove the old heavy pollution. Moisten the toilet bowl surface with an essence or citric acid solution (2 sachets per 1 liter of water). After 2–3 hours, use a brush to remove rusted stains and several times wash the plumbing with water from the tank.

Soda and Vinegar

It is better to clean this way overnight so that the rust is under the influence of cleaning agents for a long time. Prepare a solution in the ratio of 1 cup of vinegar to 1 tablespoon of soda, and moisten the surface with plenty of water. In the morning, remove any rust residue with a brush and flush water several times.
In a similar way, you can put in order the toilet, the Bay at night "Belize".
Coca-Cola or Sprite

These carbonated drinks are quite capable of coping with a slight touch of rust, as well as remove lime deposits.
Liberally moisten surfaces with soda and leave for 10–12 hours. After this, perform cleaning with a brush and flush the toilet with water.

Battery Electrolyte

Use this tool with caution, it is an aggressive chemical. It is possible to use electrolyte only in houses or apartments with plastic sewage pipes.
Fill the electrolyte into the toilet, evenly distributing it with a brush. The rust will dissolve right before your eyes, after which you need to clean the remnants of stains and wash the plumbing.
Oxalic acid

No less effectively and quickly you can cope with stains with the help of dry oxalic acid. Pour the product onto a damp cloth or foam sponge and rub the dirt. Cleaning the plumbing, do not forget about gloves, otherwise you risk getting burned.
Hydrochloric acid

For heavy pollution use hydrochloric acid. Pour the product on the drips, leave for 3-5 minutes, then proceed to the active cleaning with a brush.
To remove the acid, you will need to drain the water 3-4 times.
Remedies for rust in the toilet (chemistry)


In the shops you can buy ready-made tools for cleaning plumbing. They have a strong effect and even cope with complex contaminations in a short time. There are several types of chemicals:
Based on alkali. Such means include the well-known "Domestos". Active substances affect rust, softening it and without harming the plumbing surfaces. It is enough to apply alkaline agent on the spots and leave for 10–15 minutes, and the problem is solved. You will put the toilet in order without any special effort, but this is possible in cases where there is not so much pollution.
Drugs with acid. With the help of acids dissolves everything that can be soluble in principle, and rust will disappear in a matter of minutes. As well as alkaline, acidic agents are applied to surfaces for 10–15 minutes, and then washed off with plenty of water. However, cleaners with acids can only be used on porcelain and earthenware surfaces; enamel cannot be treated with this tool.
Abrasives. These tools are designed for "mechanical" cleaning: they are applied to a rag and rubbed off contamination until the rust marks and plaque disappear. It takes a lot of time and effort, besides the surface is covered with small scratches, which will be clogged with dirt.
When using chemicals, you must follow the instructions in order not to harm your own health and effectively clean the plumbing.

Inside the tank no less than in the "bowl" of the toilet bowl accumulates plaque and rusty deposits. If you do not clean the tank, to maintain cleanliness will not work, because the toilet will be constantly washed with rusty water.
How to clean the toilet bowl? Removing pollution requires compliance with the following algorithm:
Remove the water from the tank.
Apply the selected agent, evenly spreading on the inner surface.
Soak the cleaning compound for the required amount of time.
Remove residual dirt.
Flush the tank with water.
In order to remove rust from the tank, you can use the tools from the range of shops of household chemicals, or use the popular recipes. In this case, the same tools that clean the rusty traces of the bowl of the toilet bowl will help to cope with the problem.
Read more:
Than to clean the clog in the pipes at home
Effective means for cleaning the toilet bowl
How at home to clean the joints between the tiles in the bathroom
Bath cleaners
How to clean the urinary stone toilet at home
How to prevent rust stains

Get rid of the need to clean the toilet from rust, if the house is old metal pipes, will not work. But you can significantly reduce the amount of sediment by applying these little tricks:
When buying plumbing, give preference to models that have a water-repellent coating.
If the tank leaks, immediately repair the damage.
The problem of the appearance of deposits due to poor quality water can be solved with the help of a filter or special means for the tank (tablets or powders) that neutralize rust and other deposits.
Reduce water use by adjusting the tank.
Remove rust immediately after the appearance, with fresh dirt cope much easier.
If you follow these recommendations, you can keep your toilet in perfect condition.


30A-------xx

2000 Flushes Bleach Automatic Toilet Bowl Cleaner, 1.25 OZ

How to clean the toilet from urinary stone at home

Disorder in the bathroom will not leave indifferent any housewife. The catch phrase "The toilet - the face of the hostess" has not lost its relevance in our days.
Often one has to deal with the fact that even with regular care of plumbing the surface of the toilet bowl darkens, rust spots and traces of lime deposits appear on it. How to clean the toilet from dirt yourself? How to remove the urinary stone, plaque and rust? What cleaning solution or powder should be used to flush your toilet to shine and not damage the surface? First you need to understand how these or other types of deposits are formed.

Why is a raid in the toilet

The main "enemies" of cleanliness in the bathroom and impeccable type of plumbing include urinary stone, limescale and rust. Let's take a closer look at the problem:
The formation of urinary stone is a serious and intractable problem for those who do not know how to deal with it. Sediments form at the bottom, at the site of water accumulation. The urinary stone is a complex compound, the basis of which are mineral salts contained in human urine.
As a result, a persistent brown bloom forms at the bottom of the toilet bowl, and when there is a lot of deposits, it can lead to a decrease in the diameter of the drain hole. For this reason, you should dispose of the urinary stone immediately after its appearance.
The appearance of lime scale is due to calcium salts, which contains tap water. The more of these compounds, the higher the hardness of the water and the heavier the deposits.
Plaque is formed on the internal surfaces of the toilet, as well as in the tank. Limescale deposits are an ideal “base” for other types of pollution, and to avoid this, it must be removed immediately.
Rusty drips on plumbing appear due to poor water quality and poor condition of water pipes. If the system is old, and a large amount of rust has formed inside, its particles, along with water, fall onto the plumbing surface, forming orange-brown drips. It should be remembered that the “older” the stains, the harder it is to remove them, and to clean in a timely manner.
How to clean the toilet from urinary stone, rust stains and lime deposits? To cope with the pollution on the surface of the plumbing is not difficult if you know how to do it and act in accordance with the rules.

How to clean the toilet from urinary stone at home

Cleaning the toilet from plaque, rust and urinary stone will be most effective if you follow these guidelines:
Remove water from the toilet bowl. Simply scoop it up with a small mug, and the remnants can be “wetted” with a rag.
Protect your hands with gloves and your respiratory system with a medical mask.
Apply the selected cleaning agent to the surface and leave for the amount of time required by the instructions.
Clean the rim and walls with a brush. Brushes with a metal base is better not to use, it will lead to the formation of scratches on the surface.
After cleaning, rinse the toilet several times, flushing the water from the tank.
Be prepared for the fact that contamination may not disappear after the first cleaning. If necessary, the manipulation will have to be repeated several times.
How to remove the stone in the toilet folk remedies

If you need to tidy up the plumbing, you can use a number of tools that will help not only to remove plaque, urinary stone and rust, but also return the surface to the lost shine and whiteness.
Chemical cleaners

In the household chemical goods shops you can choose the necessary product, a variety of gels, liquids and powders are available in a wide range. How to flush the toilet store tool? All you need is a thorough observance of instructions, and the problem of cleanliness in the bathroom will be solved.
However, many housewives avoid the use of special tools. This is due to the high cost of chemicals, as well as strong toxicity. In such a case, there are a number of folk remedies that can be used without fear of harm to their health.
Baking soda

This tool copes with pollution on plumbing equipment and is suitable for cleaning the toilet from various contaminants. Pour a pack of soda in a pre-“dehydrated” toilet and leave overnight. You can spend these manipulations in the morning, before leaving for work. The main thing. To the toilet did not use 8-10 hours.
After the specified time, clean the dirt off with a brush, and rinse off the residues with water. Soda not only has the ability to eliminate various kinds of pollution, but also whitens the surface.

Warm Acetic Solution

Heat 1 cup of 9% vinegar and fill the toilet without water for 2–3 hours, then remove the stains from the surface. Vinegar is effective against lime scale, as well as dissolves urinary stone.
To achieve the maximum effect, you can make such a tool for the toilet with your own hands: add iodine, soda or salt to the vinegar solution (in proportion 1 tsp to the glass of vinegar). In this case, it is necessary to withstand the agent for at least 8 hours
Lemon acid

Empty the toilet bowl and pour 2–3 tablespoons of acid into it. Leave the product for 3 hours, then clean with a brush. The procedure will need to be repeated several times to get rid of plaque and urinary stone.
Citric acid will not only remove impurities, but also unpleasant odors. With it, you can prepare a toilet freshener with your own hands. Just dissolve a couple of tablespoons of powder in 1 glass of water and clean the surface.
Acetic Essence

If the acetic solution does not cope with contamination, you can apply 70% concentrate. Remove the water from the toilet bowl and pour the essence inside. After 3 hours, clean the surfaces with a brush and flush the water several times to wash off the remains of the caustic substance.

"Coca Cola"

Unsuitable for quenching thirst drink, however, is very useful in the household. It will help when cleaning the toilet.
Fill the toilet with a 1.5–2 liter of drink at night, during which time caustic substances “loosen” the plaque, and you can easily remove their residues with a brush.
These tools are effective, provided that the plumbing is cleaned regularly. But what to do with strong and old sediments? There are several "serious" means.
How to clean rust, bloom and old urine stone in the toilet

In the case when the sparing means were ineffective, you can use "heavy artillery" in the form of aggressive chemicals.
Iodine monochloride

This substance can be purchased at a veterinary pharmacy. Pour the solution on the dirt, and after 1-2 minutes, rinse with water from the tank. This time is enough to remove plaque, urinary stone or rust. If necessary, remove residual dirt with a brush.
It is important to know that the use of iodine monochloride is not recommended in cases where sewage pipes are cast-iron or aluminum.
Hydrochloric acid

Hydrochloric acid can be purchased at the plumbing store. Pour the liquid down the toilet and leave for 30–50 minutes. Wash the rest of the substance with water from the tank, and clean the toilet with a brush.
It is undesirable to use the tool if the works of the sewer system are plastic.


Electrolyte for acid batteries

Any unwanted stains and deposits will disappear if you use electrolyte. Apply the substance to the dirt, and leave for 1 hour. After a few times, flush the water to remove the residue and clean the surface with a brush.
This tool can cause significant damage to plastic pipes, so in homes where the system is made of this material, it is better not to use electrolyte for cleaning toilet bowls.
Dry oxalic acid

This substance is actively used by the chemical industry and is a fine powder. Removal of stains and plaque is carried out as follows: the acid is applied to a rag and the resulting impurities are wiped, then the remains are washed off with water.
You can do it another way: pour the dry acid into the toilet with water and leave for 20 minutes. Then flush and clean the surfaces with a brush.
When you work with these substances, be sure to protect your skin with gloves and wear closed clothing. You should also wear a medical mask or respirator, since toxic fumes can cause serious harm to your health. It is better to leave the door to the bathroom open and open the windows in the room closest to the toilet.
Read more:

How to clean the toilet from rust at home******
How at home to clean the sink from clogging
How to remove limescale in the toilet
How to clean the toilet from blockage at home
The best means for cleaning the toilet bowl
How to keep the toilet clean

The best way to solve a problem is to prevent it. Of course, it is impossible to avoid the appearance of deposits, but it is quite realistic to make their number and intensity of appearance significantly reduced. Use the following guidelines:
Systematically clean the plumbing with special or folk remedies and a brush.
Monitor the work of the cistern, with the slightest malfunction, eliminate the problem from the same cut.
Avoid "stagnating" urine in the toilet, flush after every use of the toilet.
Try to avoid severe contamination of plumbing, which entails the use of aggressive chemicals that damage the surface. It is better to regularly clean the plumbing using gentle means.
Do not allow an excess supply of water in the process of flushing, namely it contains substances that form deposits. The problem can be solved by placing a pair of 0.5-liter plastic bottles filled with water in a tank. This will save at least 2 liters of water with each flush.
Before cleaning, it is necessary to remove water from the toilet bowl, this will enhance the effect of the substances used.
If you decide to change the toilet, buy a version with the function of saving water, then tricks with plastic bottles will not be needed.
Implementation of these recommendations will allow to keep the plumbing clean without much difficulty.


29A-------xx

Kaboom BowlBlaster Toilet Bowl Cleaner for Hard Water, 24.0 oz

How to clean the toilet from urinary stone and limescale

The condition of the toilet depends on the care of its use. Such plumbing needs special care, so you must follow all the rules of operation, so as not to worry about how to clean the toilet from lime and urinary stone.

Causes of sediment

Because of the rare cleaning of the toilet bowl, a urinary stone appears on the rim and drain hole. Another reason for this phenomenon is irregular discharge , which is observed in families where there are small children. Due to untimely flushing of urine mineral deposits are deposited on the walls of the toilet bowl. Its density is constantly increasing, resulting in a urinary stone. Remove it with the brush will not succeed. Ordinary household chemicals are also unlikely to help get rid of the stone.

Too hard water with a specific chemical composition leads to limescale. To avoid the formation of plaque, it is necessary from time to time to clean the toilet using special tools. It is also important to take care of water softening.

One of the causes of lime and urinary stone are damage to the plumbing surface. Such defects are formed due to improper operation. So, it is enough to pour hot liquid into the toilet, so that small cracks appear there, where the build-up will increase.
Cleaning and coating type

Many people do not think about the type of coverage in the care of plumbing. In fact, when creating such modern products , glaze is used with various coatings , including antibacterial, anti-mud and water-repellent. This material has its drawbacks. So, when used for washing a hot liquid, the coating will crack, which will spoil the appearance of the toilet bowl and become a source of bacteria. Although this material is resistant to external factors, it may suffer from exposure to certain acids. Accordingly, hard scouring pads and abrasive powders should not be used to clean stone or plaque.

In advanced cases, when the layer of contamination is very large, it is worth considering whether to flush the toilet using expensive tools. Perhaps a more rational option is to buy a new plumbing. If you still decide to start cleaning, first study the composition and instructions for the selected detergent.
Proper toilet cleaning

To clean the plumbing from sediment, you must first remove the water . For this purpose, suitable plunger or a glass with a handle. After that you should use detergents. They are applied to the walls and leave at least an hour. If necessary, the composition is re-poured, and then clean the coating with a brush. In the presence of old sediments will need more serious means.
Household chemicals

Abrasive powders , namely “Pemolux”. The principle of application of such compounds is very simple. It is necessary to scoop up water from the plumbing, put on gloves, distribute the powder over the surface and then rub the product until the surface becomes snow white. This occupation is quite tedious. Also the disadvantage of this method is the loss of smoothness of the walls of the toilet bowl, as a result of which microcracks appear on the faience coating. As a result, dirt will accumulate here.
Alkaline products , including "Whiteness" and "Domestos". They contain caustic soda solution. It easily dissolves the urinary stone, the remnants of which can be removed from the walls with the help of water and an ordinary brush. You must first drain the water and then apply the solution to the contaminated areas and wash it off after 30 minutes. If necessary, the procedure is repeated twice. The alkali completely dissolves the urinary stone and limescale. When using such compounds, it is necessary to close the tank even with a slight flow.
Acid-based detergents , namely “Silit”. Such household chemicals work in the same way as alkaline compounds.

Folk remedies

Ordinary vinegar will help remove the stone from the toilet. A glass of this liquid is heated to 35–40 ˚ C, and some baking soda and iodine are added to the container. The mixture is poured into the toilet and left overnight, so that the stone is completely dissolved.
You can remove plaque and stone with citric acid. For this procedure, enough 2 packs of powder. The tool is poured into the toilet, and then close the lid. After 2–3 hours, the stone will dissolve. To completely remove it, you need to repeat the procedure several times.
For cleaning the toilet bowl is often used technical oxalic acid , which is sold in powder form. Before using it, it is necessary to familiarize yourself with the instructions and observe the safety measures, namely to wear rubber gloves. The powder is applied to a damp cloth and wipe her fate, covered with urinary stone or bloom. If desired, you can dissolve the acid in the toilet, and then leave it for an hour. In this case, you need a lot of powder. After cleaning, plumbing equipment is thoroughly washed.
Remove plaque or stone from the toilet bowl using an electrolyte. This is the most effective method of removing old stains. When performing the procedure, you must wear a respirator, rubber gloves and goggles. It is necessary to pour out electrolyte very carefully, so as not to splash it. Such an effective tool will not work in the presence of plastic pipes.

Preventive measures

As mentioned earlier, plaque in the toilet is due to irregular cleaning. To avoid or reduce the likelihood of stone formation, you can use simple tools and tips .

First of all, it is necessary to eliminate the leakage of water from the drain tank. In some cases, it is sufficient to slightly adjust the float. Sometimes it is necessary to replace or repair valves.
If desired, you can use tablets designed for the cistern. Thanks to them, deposits will not form, and the plaque on the walls will partially dissolve.
Once a week should clean the toilet with special means. Gels are applied to the surface and washed off after 30 minutes.

Simple preventive measures are very important, because to clean the layer of plaque or stone with a thickness of 1-2 cm is not easy. In order not to encounter such a troublesome event, it is sufficient to regularly use special detergents and not to forget about flushing after each use of the toilet.


28A-------xx