Clorox Toilet Bowl Cleaner with Bleach, 6 Count

10 most effective tools for cleaning the toilet

Cleaning plumbing - a mandatory set of regular activities to maintain the cleanliness and safety of use of products. Lime deposits, rust, and urinary stone do not appear on the toilet bowl surface within a single day. The editorial “Plumber Portal” will talk about how to clean the toilet from dirt, using the 10 most effective cleaning tools.

Types of sediments and their causes

To understand how to clean the toilet from stubborn dirt, you need to find out what type of pollution in your case prevails. There are few hard-to-remove deposits and, as a rule, they are of the following types:

Urinary stone It consists of complex mineral salts, which with urine fall under the rim and on the surface of the bowl. This problem is characteristic where they forget to flush the toilet behind themselves or rarely treat the toilet for prevention. For health, it is not harmful, but sanitary ceramics corrodes. If the urinary stone has already appeared, it will be rather difficult, but possible, to eliminate it with the help of ordinary means.
Limescale. In houses where the water is hard enough, over time, the calcium salts contained in it settle on the walls of the tank and the toilet bowl. This is the main reason for the appearance of plaque in the toilet. Typically, lime deposits quickly accumulate various other contaminants. Lime scale in the toilet - what to remove? Use acid based products.
Rust. Rusty drips are often associated with poor water quality. The reason may be both old rusted water pipes, and water from a well with a high iron content. How to wash the yellow strip and whiten the toilet to the original whiteness? Chemical means.

To improve the quality of water, they usually use various filters or add various prophylactic agents in the form of special blisters and tablets that effectively get rid of lime and prevent its appearance.

Important! If time does not remove plaque from the water supply nozzles, deposits can cause them to clog.

During the acquisition of sanitary ceramics is recommended to check the inner surface of the bowl for smoothness. Ideally, it is best to purchase products made from sanitary porcelain, it differs from cheaper earthenware with a dense structure. Namely, the density directly affects the smoothness of the toilet, and thanks to this limescale it is more difficult to penetrate into the structure of ceramics, so cleaning it will be easier.

Mechanical damage to the faience allows dirt to accumulate. When removing contaminants from the toilet, you should not clean the surface of the bowl and cistern with tools that include abrasive materials, or use metal brushes. It is also not recommended to pour hot water into the toilet, as this contributes to the appearance of microcracks.

One of the main reasons due to which a urinary stone appears in the toilet and other types of sediments is the neglect of prevention methods for cleaning ceramics. So that you do not have to often look for ways to clean the toilet, you need to remember that the more often you carry out the planned cleaning of the toilet and clean the plumbing, the longer it will retain the original whiteness.
Folk ways to clean the toilet

To clean the pottery yourself, it is not necessary to purchase expensive chemical toilet cleaner products from the store. Effective substances that really whiten the surface of plumbing, are quite expensive, but for ineffective ones do not want to throw out money.

To avoid waste of money and clean the product from limescale, rusty streaks and urinary stone, you can use the improvised home remedies, which are always available in any self-respecting hostess.

So, here are some good folk ways to clean the toilets from the inside:

Lemon acid. One of the worst enemies of lime scale is citric acid. With its help you can easily remove deposits, the state of which has not yet reached a critical point. To do this, you need to take 3-4 sachets of substances, apply to contaminated places, cover the toilet with a lid, leave for 4-5 hours (best until the morning), wash off the water, process well with a brush. Effective removal of fresh dirt.
Acetic acid. The principle of action is similar to lemon. To apply it, you need to prepare it: you need to take 250 g of vinegar or food vinegar 9%, heat to 45-50 degrees under the lid closed. Then pour warm vinegar into the toilet, for greater effect, you can add a little baking soda (2-3 tsp.), Be sure to close the toilet bowl lid and leave for 2-3 hours or overnight. In the morning it is necessary to wash the toilet bowl intensively with water and wipe it with a brush. When working with acetic acid, it is necessary to protect the airways by covering them with a bandage.
Oxalic acid. It is a cheap and effective method to restore the original whiteness of your ceramics. The product should be applied on a slightly damp and soft cloth or sprinkled directly on the very place of deposition of lime and stone. Saving substance is not necessary. After processing, the accumulation of mineral deposits must be washed with a brush and rinsed thoroughly with water, the bowl will shine again like new.
Baking soda. Soda will help strengthen the action of acetic or citric acid. Soda, which falls on contaminated sites, destroys the structure of mineral deposits and thus allows them to be completely removed from the surface of ceramics. To clean the toilet you will need at least 1 pack (about 200 g). In order to increase the likelihood of destruction of deposits, it is recommended to leave the tool overnight. In the morning, it will only be necessary to process by cleaning the residual sediment with a brush.
Coca Cola. This drink has a good cleansing property. Coca-Cola will help not only freshen up in the heat, but also clean the toilet from the old limescale. To do this, it will be necessary to pour 1-2 liters of liquid into the bowl and leave it overnight. In the same way we clean the toilet "Belize" and get rid of old dirt.

If you are looking for options than to remove limescale in toilet bowls, then feel free to use any of the above folk methods.

Although the improvised means are not very strong concentrations of acids and alkalis, however, you should not neglect safety precautions and you should wear gloves while working with them. And when using vinegar, you also need to protect the airways.

If after the first time the contamination is not removed, the procedure must be repeated until the desired result is achieved. It so happens that the sediments that have “grown” over the years are not amenable to any efforts. Then you need to use the "heavy artillery."
Chemical removal of deposits

Handy tools will help get rid of small dirt. Code from the limescale is not visible cover the toilet, and sediments of urinary stone is dark brown in color, folk remedies can not do here. Here it is necessary to apply "heavy artillery", which is presented in the form of potent chemical cleaners. How to clean the toilet with chemicals:

Orthophosphoric acid. This tool will provide an opportunity not only to get rid of mineral deposits, but also to clean the toilet from rust, which often covers the parts of the drain and filling fittings inside the tank. In order to clean the drain barrel and the bowl of the toilet bowl, it is necessary to pour about 100-150 g of reagent into them, and after 10-15 minutes, rinse the surface of the product with running water. The main positive aspects of this drug is that it does not destroy rubber and plastic products.
Hydrochloric acid. It is necessary to work with it very carefully, before washing the plumbing with it, you must first protect not only the exposed skin, but also the respiratory tract. In order to dissolve lime deposits, it is enough to simply wipe them with this substance. In order to get rid of the urinary stone you need to pour half a glass of the product into the bowl and wait 10 minutes. Before using this reagent, it is necessary to make sure that no rubber or plastic compounds were used during connection of the toilet bowl, since their acid will dissolve as easily as plaque.
Chlorine. It is present in whiteness and is able to dissolve all organic compounds. Chlorine fumes can be harmful to health, because of this, this method is highly undesirable. Also, after chlorine has been used, rubber seals become less elastic and begin to leak water.
Abrasive preparations. Cleaning sanitary ceramics using powders is quite effective. But it is worth remembering that small granules are capable of leaving microscopic scratches on the floor of the toilet bowl, which will contribute to even larger mineral deposits.
With strong and abundant growths of lime deposits and urinary stone, you can use the liquid electrolyte used in automotive batteries. It is necessary to resort to its use only as a last resort, when the remaining funds do not give the desired result. It contains sulfuric acid, so it is recommended to secure yourself in advance before working with it.

Ideally, it is most effective to use special detergents for toilet bowls. Before you clean the toilet from urinary stone and other deposits, using these substances, carefully study the product label.

Very important! With caustic chemicals it is necessary to work only in rubber gloves! Do not neglect safety when using!

When choosing toilet cleaners, it is better to give preference to cream formulations and gels. Compared with powders and liquid products, they are simpler and more economical to use.

Regarding specific brands, based on user feedback, "Silit", "Toilet duckling", "Sanoks" and "Sanitary Gel", are able to get rid of any contamination. Domestos and Breffs do an excellent job with rust.

Universal means can be cleaned not only toilets, but also ceramic tiles: “Komet Universal”, “Santry”, “Sanitol”, “Sarma”, “Gel WC 5+” - are ideal means for daily care, sanitation and removal of deposits.
How to prevent the appearance of persistent pollution?

Many people know that it is much easier to prevent the appearance of pollution than to pick up the means to eliminate them. To prevent the spread of urinary stone and lime deposits, you need to use a few tips on how to prevent deposits in the toilet:

The drainage system must be adjusted so that water does not constantly flow from tank to bowl. This operation will not only prevent the occurrence of lime deposits, but also saves water.
There is no need to flush fat or other food debris into the toilet, since they can cause various tumors on the surface of the toilet bowl.
Take care of plumbing.
Regularly clean the surface of the toilet for prevention, do not allow it to be heavily soiled.
Constantly walk around the bowl after each use of the toilet, this will allow you to clean it of organic pollutants.
Use for the prevention of soapy substances that are mounted on the rim of the toilet bowl or added to the tank.
If you follow these recommendations, then you won’t have to ask how to remove plaque, rust or urinary stone from the toilet bowl.

Summing up, we note that when choosing a tool for cleaning the toilet, you should not often use potent substances, since they adversely affect the plumbing surface, leaving microdamages on it.

Once you get rid of mineral deposits, regularly resort to rehabilitation. If there is poor quality water, install house filters or use special pills that will help prevent the appearance of plaque in the cistern and toilet. With proper care, your plumbing will shine clean.


43A-------xx

Fluidmaster 8300 Flush 'n Sparkle Automatic Toilet Bowl Cleaning System, Bleach

Methods how to clean the urine stone toilet

The maintenance of the toilet room takes quite a lot of time and effort. Occasionally, rust stains of urinary stone may appear on the toilet. Without effective means it will be almost impossible to get rid of such a problem. What methods, how to clear a toilet bowl from an uric stone, exist?
Causes of urinary stone

There are several of them. It so happens that the stone appears because of the banal laziness of the owners to wash off after themselves. But this is not always the main reason. Even if the owners are especially clean - there is no guarantee that it will be possible to avoid the appearance of a raid. Here are the main reasons:

The appearance of microcracks on the glaze of the toilet. This happens if the surface is cleaned with metal wire wool, as well as due to the use of hard abrasive cleaners.
In microcracks accumulate lime deposits that appear with each flushing with hot water.
The water contains minerals. And, the more there will be flushes and water being flushed down the toilet, the greater the formation of urinary stone.
The other extreme is that the amount of water being washed is less than necessary.
Rare preventive cleaning.

how to clean the urine stone toilet
Disposal methods

There are several ways to clear the urinary stone, but folk methods are the least expensive. Choose a specific method of cleaning should be based on several factors: how strong the degree of contamination of the inner surface, and what the thickness of the plaque. You should not hope to clean the toilet to shine from the first attempt, but to achieve a good result after several regular cleanings is possible.

In no case is not recommended to try to get rid of plaque by scraping, with a knife or other sharp objects. From such merciless cleaning, the glaze will be damaged, and there will be even more problems. Most often, do without acid will not work. At the same time, you should wear rubber gloves, of sufficient density.
Folk remedies

Folk remedies are good and effective, and the undoubted additional advantage is their low price.
Vinegar

With the help of vinegar can be cleaned quite problematic and old urinary plaque. We take a metal saucepan, pour 0.5 liters of 9% vinegar into it, and heat well. Sprinkle the toilet from the inside with one glass of soda, and then pour the vinegar from the pot onto the walls. In this form, leave for the night. The next day, you should rub the problem areas with a sponge and wash the vinegar with water.
Citric acid

It is also effective, gives good results. We take a couple of tablespoons of acid, sprinkle the walls of the toilet bowl. Leave, as it is, all night. The next day, you should first wash off, then a brush to walk through the problem areas, again rinse. If you could not immediately achieve a positive result, then you can add soda to the acid. If the thickness of the urinary stone is of impressive size, then sachets of citric acid will be needed more.

what to clean the toilet
Soda

Such a way as to clean the toilet, suitable for less contaminated surfaces. Soda can not immediately take a fairly large thickness of the raid. It is applied just as simply: pour soda on the walls of the toilet bowl, wait a few hours or night. After washing and rubbing the problem areas with a brush.
White

We remove water from the toilet bowl to the end with the help of a plunger. Whitewash spill toilet and problem areas. Close the lid, put a rag on top to minimize harmful fumes. Waiting for the night. In the morning you should clean the dirt with a sponge, rinse. If necessary, repeat the procedure.
Household chemicals

When choosing a chemical cleaner should opt for those containing hydrochloric and formic acid. Below are some examples of household chemicals:

In "Silit" are quite strong acids, including hydrochloric. This cleaning is the most effective.
The main part of the means "Duckling active" - ​​hydrochloric acid. It helps to clean even the most old urinary deposits.
"Mr. Muscle" also provides a positive result. For several hours, the problem areas are filled up with granules, then they are simply washed away.

Preventive stone prevention measures

It is impossible that the water flowed without the need - this is one of the main causes of the stone.
Flush away with plenty of water.
Take care of regular toilet cleaning.


42A-------xx

Scrubbing Bubbles Toilet Cleaning Gel Fresh, 2Count, 2.68 oz

How to clean the toilet from limescale (stone) and rust

The rules of hygiene and sanitation are the generally accepted norm, but the measure of their observance for each individual. At home, the question of how to clean the toilet is quite relevant. The methods and means used for this purpose depend on the condition, period of operation and degree of contamination of the toilet bowl itself.

The most common problem in this aspect is the formation of a urinary stone . However, before proceeding to the specific methods of removal, you should be familiar with the reasons for its occurrence on the surface of the plumbing.

First of all, lime deposits contribute to the formation of stone. Their presence is inevitable where water is taken from artesian wells or river intakes. If you look, it's everywhere. With regular use of the toilet urine is only a concomitant factor in the process of "growth" of the stone.
Limestone (plaque) in the toilet - the causes of education?

A certain amount of water contains a fixed amount of dissolved minerals. The amount of precipitated lime is directly proportional to the amount of water passing through it. And such a trivial matter, as an unregulated cistern, favors even more flow of water than when using the toilet for the intended purpose.
Plumbing with a porous and rough surface is more prone to the formation of deposits. Dirt less going where, respectively, less irregularities. This pattern applies to lime and urinary stone, rust.

When buying a toilet bowl should be considered: in glazed models of sanitary ware a smoother surface. This means that the need for cleaning will appear less frequently.

Porcelain can be said to be ideal, since it has an even smoother surface, which naturally affects the price.

Preventive measures to prevent the formation of urinary stone and rust

Plaque with a concomitant unpleasant smell is the result of a rare cleaning. What can be done without buying expensive tools that can easily clean the toilet?

Eliminate the leakage of water from the toilet bowl. To prevent the tank from overflowing, it is sometimes enough to adjust the float. In some cases, repair or complete replacement of valves.
To purchase special pills for the drain tank, which prevent the formation of deposits and help to partially dissolve the existing plaque.
At least once a week you need to handle the toilet cleaner. It is not difficult to apply it to the surface, and after a while just wash it off.

We should not forget about preventive measures, since no single tool can clean the toilet from stone and rust of a centimeter thickness in a few minutes. If this problem is present - the urinary stone has grown over the years of use - go to the store!
Video to combat plaque and rust toilets

Modern household chemicals to help

Abrasive Scouring Powders

For example, the famous tool "Pemolyuks." The principle of its application is simple: put on gloves, scoop out water from the toilet bowl, evenly distribute the powdered product and rub it with a rag until a snow-white surface appears.

Lesson tedious and unpleasant. The disadvantage is that the inner surface of the toilet after cleaning will become rough, because the abrasive leaves microscratches on the glaze or faience, which, in turn, contribute to a more rapid accumulation of dirt.

Alkaline cleaners

The available domestic representative of this group of products is “Whiteness”, the more expensive is the imported “Domestos”. The basis of such funds is usually used caustic soda solution. He is able to dissolve the urinary stone, and the remnants of sediment are easily removed with a brush and water.

How to clean the toilet with alkali? Siphon water from the toilet bowl, apply the solution to the pollution, wash it off after half an hour. If necessary, the procedure can be performed several times, and “Whiteness” (due to its affordable cost) can be poured in place of water.

If the tank even leaks slightly - it is necessary to cut off the water supply to it before cleaning, rinse and wait until it leaves without residue, otherwise the alkali will quickly wash off, without having to dissolve part of the sediment.

Acid cleaning products.

For example, "Silite". The principle of its action and method of use is similar to alkaline cleaners.

Folk remedies

Long before entering the sale of imported household chemicals, people knew how to clean the toilet from the raid using improvised means. It was enough to get a concentrated solution of any acid.

Oxalic acid is dry . It is used in the chemical industry, with the aim of etching surfaces before the direct application of enamels. A certain amount of this substance will fully cope with the removal of urinary stone in the toilet. To do this, apply acid to a damp cloth (gloves must be worn) and wipe contamination or dissolve a fair amount of acid directly in the toilet. After applying the tool is washed off, and the surface is cleaned with a brush.

Electrolyte for batteries . Also an acid. Apply and wash off after 15 minutes (can be repeated if necessary).

Citric acid and soda

Acetic essence . Before its application should drain the surface of the toilet. The sharp smell of vinegar is unpleasant, so it is better not to inhale the fumes.
Coca-Cola or Sprite . This popular "recipe" appeared not so long ago. One or two bottles of drink are poured into the toilet. Citric acid, which it contains, relatively quickly eats deposits.

Conclusion - it is easy to clean the toilet, if you do it regularly. The longer you do not take preventive measures, the more difficult it will be to remove stone deposits. But, judging by the number of cleaning products, this will be possible.


41A-------xx

Scrubbing Bubbles Vanish Continuous Clean Toilet Bowl Drop-Ins, Box of 5 Blue Discs (2-Pack, 10 Discs Total)

How to clean the toilet from urinary stone at home

It's nice when the plumbing in the house shines clean, and according to the rules of hygiene, just a good tone, there should be a sterile environment in the bathroom. But sometimes the toilet is covered with brown bloom, and then the question arises: how to clean the toilet from urinary stone at home and return it to perfect whiteness? In the article we will tell why plaque and rust are formed in the tank and on the toilet, and what means to use to combat pollution.

to content ↑
Why is a raid?

To understand how to solve the problem, which drugs to use, you must first find out the type of pollution, the reason for its occurrence.

The main enemies of white toilet:

Urinary stone
Rust.
Limescale.

Let's get to know the enemies closer.

Urinary stone

The most important enemy that is very difficult to get rid of is the urinary stone. Usually it accumulates in the bottom of the toilet - where there is always water. The urinary stone consists of complex mineral salts that enter the toilet along with urine. The problem with brown deposits occurs in families where households often forget to flush with them or, if the toilet itself is rarely subjected to preventive treatment.

Sediating on the walls of plumbing, salt deposits turn into a rather thick layer of brown color. Due to such deposits, the diameter of the drain may even decrease. Therefore, ideally, it is necessary to fight the urinary stone as it is formed, and not to wait until it becomes “impenetrable”, because then, conventional chemical agents will not cope with it.
Rust

The appearance of rusty drips associated with the quality of water, the state of the metal parts of the pipe, the drain tank. The quality of water entering the drain can also be affected by old rusty plumbing plumbing pipes. In addition, if the rubber pads do not completely block the drain, and the metal parts used are of poor quality, then the rust formed on them will flow by gravity from the tank into the toilet and form an unaesthetic rusty strip.
Limescale

Such a pollutant is less common, as it is found in homes with increased hardness of water containing calcium salts. The higher the water hardness, the faster the plaque will form. Calcium salts, over time, settle in the tank and on the toilet, and on top, on a lime scale, other contaminants quickly form. To get rid of the limescale helps funds containing an acid in its base.

to content ↑
How to avoid serious pollution?

With different types of pollution easier to cope at the stage of appearance. In order not to look for, than to clean the toilet from rust and plaque with your own hands, follow simple preventive measures:

Eliminate leaks from the toilet bowl. Sometimes it is enough to adjust the float and the toilet will not overflow, and rust will not settle on its walls.
Get pills for the cistern. Preparations, albeit slowly, but still prevent the deposition of salts. In addition, the pills give the water a pleasant smell, color, help dissolve the already formed plaque.
To improve water quality, use different filters.
Ensure that no mechanical damage is formed on the surface of the toilet bowl. Porous, rough surface accelerates the formation of deposits. Do not use metal brushes or products with coarse abrasives for washing the toilet bowl or tank. In addition, hot water cannot be poured into the toilet, since microcracks are formed on the plumbing surface with such an impact.
Do not forget to clean the plumbing, at least once a week. Apply detergent, wipe with a brush after half an hour and rinse.

to content ↑
How to clean the toilet to white at home?

Before solving the problem of how to clean the urinary stone toilet at home, decide whether it is worth the effort that you expect to spend on cleaning plumbing. If it is quite old, it is easier to buy a new one, especially if the thicket has already served its place in the past millennium.

If the ceramic “participant in the process” is dear to you as a memory or it is not possible to purchase a new one, then get down to business and buy a toilet cleaner with your own hands in the store. As in all cases, methods for solving any problem are divided into benign and radical. We will acquaint you with household chemicals that will help remove the urinary stone in the toilet.
What can household chemicals offer?

The industry offers a huge amount of solutions and powders. All drugs can be divided into four main groups, each of which acts in its own way and in one way or another allows to clean the toilet bowl from urinary stone at home.
Abrasive Scouring Powders

An example of such a means might be “Pemolux”. The principle of cleaning is quite simple. Your actions:

Wear rubber gloves.
Scoop out all the water from the cistern and toilet bowl.
Pour the product onto the plumbing surface.
Using a soft sponge or cloth, scrub the dirt until a white surface appears.

Important! With frequent use of powder on the surface of the plumbing may appear micro-scratches, and the surface will become rough. Therefore, give preference to gels and cream formulations. In addition, they are more economical and easy to use.

Alkaline agents

Liquid preparations contain caustic soda. They dissolve the urinary stone and relieve the plumbing surface from contamination. Preparations are well disinfected, do not damage the plumbing coating. Alkaline preparations perfectly dissolve fats, which allows to remove blockages of organic origin.

To clean the toilet using alkali, proceed as follows:

Siphon water from the toilet and cistern.
Apply the product to the plumbing surface.
Leave the bathroom for half an hour.
Wash away all residues of plaque with water.
Repeat the procedure if necessary.

Important! Consider that such products have a rather pungent and peculiar odor, and also do not have the best effect on the skin. Therefore, be sure to use protective equipment - gloves, mask, goggles. Otherwise, you will be able to clean the urine stone toilet at home, but in return you will get health problems.

Chlorine based products

Suitable for daily care, perfectly cleaned, disinfected, do not corrode the coating, do not form microcracks. Commercially available as a concentrated solution and powder.

Drugs perfectly remove odors, but after themselves leave the smell of chlorine.

Important! The most popular tool with such compositions is the familiar “Whiteness”, it will be inexpensive, which is an undoubted advantage.

Acid Cleaners

These chemicals will defeat the oldest sediments of urinary stone and rust. Apply them in the same way as alkaline agents. However, it is often not recommended to use acidic preparations, since they contain aggressive substances: oxalic, hydrochloric, formic, orthophosphoric acids, and their mixtures, which are capable of corroding the coating to some extent. Yes, and a couple of acids are very bad for human health.

As an example, the leaders of the group of acidic funds are “Sillit”, “Domestos”. Available in convenient plastic bottles. Curved spout capacity allows you to apply the product directly under the rim of the toilet bowl.

to content ↑
How to whiten the toilet at home folk remedies?

Our mothers and grandmothers had to deal with the problem of hygiene in the bathroom long before the appearance of special household chemicals. Our ancestors knew how at home to clean the toilet from urinary stone with improvised means.

We offer you to use their recipes:

Heat a glass of 9% vinegar to 40 degrees and pour into the empty toilet bowl for several hours. This method is able to remove a significant portion of stone and limescale. To enhance the effect, add a little iodine, salt or soda (1 tbsp of soda per cup of vinegar). Perform all cleaning procedures in the evening to leave the solution overnight. The urinary stone will become soft, pliable, respectively - it can be easily removed.
Solve the problem and acetic essence with a concentration of 70%. From the toilet pump out all the water, the formed void, fill it with essence. Leave the plumbing for 1.5-2 hours. To enhance the effect, add a solution of iodine to vinegar, in a ratio of 1: 1. After the cleaning procedure, wipe the surface with a brush.
Citric acid is a worthy alternative to vinegar. Two or three tablespoons of acid poured into an empty toilet and tank. Leave for a few hours. Clean with a brush and rinse. Repeat the procedure several times until you have completely cleared the urine stone toilet.
Soda can not only enhance the action of acetic acid, but also perfectly copes with pollution. At night, put a whole pack of soda down the toilet and leave it until morning. When you wake up, clean the plumbing surface with a brush with a brush and wash away any residual dirt.
"Coca Cola". This popular recipe was born recently. Fill a dry toilet bowl with 1-1.5 liters of liquid and leave overnight. Soda water quickly corrode deposits.

Apply “heavy artillery”

If all the attempts made did not produce the expected effect, then use tough measures to clean the urinary stone toilet:

Dry oxalic acid. This tool is used in the chemical industry. Apply acid to etch the surface before applying enamel. Sold in powder form. Apply the product on a piece of cloth and wipe the coating. You can also use another method: dissolve a fair amount of product right in the toilet. After application, wash off the acid and clean the surface with a brush. Remember that when using acid, you must adhere to safety measures.
Hydrochloric acid. The tool is sold in plumbing stores. Use acid to clean water heaters in columns and gas boilers. Pour the liquid into the toilet, and after 0.5-1 hour rinse. Disadvantage: can not be used if the sewer pipes are made of plastic.
Monochloride iodine. Liquid can be purchased at veterinary pharmacies. Pour all contaminated areas with solution and immediately rinse with water. Liquid remedy perfectly removes all types of stone, and limescale and rust corrodes within a few minutes. Disadvantage: can not be used in homes with cast iron sewer pipes. In addition, iodine monochloride is aggressive to aluminum.
Electrolyte for acid batteries. The tool will get rid of all hard-to-remove unwanted deposits quickly and efficiently. Apply electrolyte for half an hour and hour and rinse with water. Disadvantage: it is necessary to use very carefully with the use of protective equipment, you can not use in houses and apartments with plastic pipes.

Important! When working with chemicals, use rubber gloves, a protective coat and a respirator. Do not close the door to the toilet during processing. After cleaning, thoroughly rinse the plumbing and ventilate the room well.

to content ↑
Useful tips:

Do not use potent agents too often, as they damage the coating and leave microdamages on the surface. Once, having strictly removed the urinary stone and lime deposits, regularly carry out preventive measures with the use of more gentle cleaners.
Before carrying out the cleaning work, be sure to dry the toilet bowl. Drain the water with a plastic container, and remove the remaining moisture with a cloth.
In addition to preventive cleaning and sediment control, be sure to adjust the water supply to the tank. Excess water for flushing is not only economically unprofitable, but is also one of the reasons for the appearance of lime scale. The easiest way to reduce the amount of water supplied is to place 1-2 plastic containers with water in the tank. Savings: 2-3 liters with each use. In the case of purchasing new plumbing, choose a tank with a double button and the function of economical use of water.

When answering the question of how to clean the toilet, the choice of means and methods is always left to the user, because it is necessary to take into account not only the features of the sanitary device, but also the type of material, the degree of pollution and the presence of microcracks and damage. If deposits have appeared recently, then you should not resort to radical methods - start with popular, proven means, because you can clean the toilet with vinegar, if its smell does not irritate you. We hope that the information obtained will help you keep the plumbing in perfect cleanliness.

40A-------xx

Lysol No Mess Automatic Toilet Bowl Cleaner, Ocean Fresh Scent, 8 Count

How to clean the toilet: from limescale, urinary stone

Even with the most careful use, the toilet still loses its whiteness over time. How to clean the toilet from urinary stone, rust, lime and other contaminants - all this in our article. What you need to pay attention when cleaning and what means to use to avoid large expenses.

What to look for

Of course, the toilet is a place that can hardly be called the "face" of the apartment. And yet, those who are visiting you quite often, judge your household and cleanliness precisely as a toilet. Yes, and you yourself, you see, is always nicer to use clean plumbing, rather than a toilet, overgrown with yellow bloom.

Another thing is that to achieve whiteness and beauty can be difficult. Few people like to clean up in a place like a toilet, and lime and urinary deposits on the walls, unfortunately, keep very firmly, and to eliminate them, you have to spend a lot of energy.
What do you need to pay attention to when cleaning the toilet so that regular cleaning does not turn into hard work?
The first problematic place of the toilet bowl is the area under the sides of the bowl, where most of the microbes accumulate, lime build-up accumulates, urinary stone is deposited, and over time it all spreads lower and lower in the bowl.
Therefore, when cleaning the toilet, special attention should be paid to this particular area. It is necessary to wipe it as thoroughly as possible with a sponge with a cleaning agent, and, if necessary, clean it with a brush to remove any existing deposits.

The second problematic place of the toilet bowl is the area where the water flows. Everyone at least once saw a toilet, which is quite clean by itself, the appearance of which nevertheless spoils the yellow stripe, which descends from the drain hole in the cistern to the “step”. Modern toilets, where there are no “steps” and the water washes the entire bowl, also suffer from this problem. The fact is that thin streams still flow down the same places on the walls - and over time they begin to leave rusty strips.
So that all this does not have to be cleared away, it is better, without waiting for the appearance of such strips, to especially carefully wipe the walls in these places, not leaving rust even a chance.
Finally, separate attention must be paid to the seat and sides of the toilet bowl. If on the outside of the seat you notice dirt easily, then on the reverse side the bloom can accumulate for a long time and unnoticed. At each wash, the back side of the seat should be thoroughly rinsed - not necessarily with a cleaning agent, you can simply sponge it.

And of course, do not forget to wash the toilet from the outside. This area is less susceptible to contamination, but dust, splashes and household dirt are still deposited on the sides (as on the tank and on the lid).
How to wash the toilet?
Washing the toilet - it is not too pleasant, but at first glance, it seems, quite simple. Especially if you know what to pay attention to. However, in fact there are still a few rules regarding the cleaning process - neglecting them, many complicate their lives, and they simply cannot wash the toilet properly.

First, you can really clean the toilet well only with the use of special tools. It is not enough to simply wipe its walls with a brush or brush and flush the water - this will not remove the inevitable deposits. There are quite a few tools for cleaning the toilet bowl - Domestos, Komet, Silit and other well-known powders and gels. To save a lot of people use the available tools - soda, vinegar, whiteness. What to choose - you decide, focus on your convenience and finances.

Secondly, cleaning the toilet bowl must certainly be carried out with rubber gloves. And the point, of course, is not only that it is unpleasant to touch all sorts of deposits with bare hands. Toilet bowl cleaners, household or chemical, are always quite poisonous and affect not only dirt, but also skin, eating away at it.
Therefore, gloves are needed for your safety - they must be tight and long, so that detergent does not exactly fall on your hands. Pay attention also to the sponge, which you will clean the toilet - it is necessary that on the one hand it was hard, abrasive, because a soft surface is unlikely to achieve a good result.
It is the best of all to fill in a cleaner not on a sponge or "step" of a toilet bowl, namely on its circle under a rim. Most cleaning products even have a special cover geometry that makes it easy to dispense.
Many people, pouring cleanser into the toilet, make a mistake, immediately starting to wash it. This is wrong - in order for a chemical or household remedy to work as it should and had time to thoroughly eat up the accumulated deposits, you should close the treated toilet with a lid and leave for 15-20 minutes just to stand - and then proceed to its immediate cleaning.

By the way, the restroom is a rather cramped space, especially when it comes to a separate bathroom. Therefore, when cleaning the toilet, it is important to ensure proper ventilation of the room. After all, you will have to lean over the cistern and inhale harmful vapors. If this cannot be avoided altogether, then it is necessary to at least reduce their concentration in the air to the maximum.
Do not lean over the tank too low - otherwise you may accidentally splash on your face and get into your eyes.
After you filled the toilet with a cleaning agent, waited, and then thoroughly cleaned the entire surface with a sponge or brush, you can drain the water. At the same time, continue to rub the walls to completely remove the cleaning agent.

At last, the lid and outer sides are traditionally handled - just with a wet sponge, since it is not a question of heavy pollution.
How to clean the toilet from complex dirt
We have listed the main points that need to be paid attention to and the procedure for cleaning the toilet bowl. But what if, for some reason, the toilet is already heavily covered with limescale, urinary stone and rust? Is it possible to somehow eliminate them, or the only way out is to buy a new toilet?
Eliminate ugly plaque in most cases still possible. And even if the toilet does not become “as good as new,” it will still be noticeably cleaner.
It is best to deal with sediment strong acids and alkalis. Thus, for the fight, you can choose a particularly strong tool, in which it is written that it is intended for heavy pollution - for example, Schumanit.

And you can use the household tools. Especially popular are citric acid, ordinary vinegar or soda.
By the principle of action, they work in approximately the same way - the tool is poured or poured into the toilet and left there for several hours (therefore it is advisable to fill the toilet overnight and close the lid). The difference is mainly in the dosage:
if you are using soda, then you need to pour a whole pack into the toilet;
in the case of a bite, there will be enough glass - but it is advisable to warm up the liquid slightly before this and add soda or iodine (spoon) to it;
Citric acid is poured in the amount of 4 - 5 bags.
The whiteness, which is generally very widely used in the household, also helps to cope with the patina.
To remove weak and medium contamination, cleaners simply enough to thoroughly rinse with water, before wiping with a sponge. Strong deposits will have to be fought with a brush.
What to do to the toilet soiled less?
Of course, the best way to keep the toilet clean is prevention. How to create conditions in which plaque and rust will not spread along the walls at all?
First of all, you need to wash the toilet regularly - at least once a week. Then all the sediments that begin to accumulate simply do not have time to go into a serious stage.
In addition, it is necessary to use the toilet carefully at all - that is, to monitor its cleanliness during use, not to forget about the brush.

If rusty smudges constantly appear on the toilet, this is not normal. You need to look into the toilet cistern and try to adjust the drain - once a yellow stripe appeared on the wall, it means that the water continues to flow imperceptibly even in an unused condition.
And finally, to avoid the appearance of urinary plaque, special balls and capsules for the toilet bowl are used, as well as special tablets that dissolve in the tank. Toilet blocks are hung on the rim, with each flush they doused with water, and thus, the toilet is immediately treated with a disinfecting and cleaning agent. In addition, such products also have a pleasant smell - that is, they will additionally deodorize the room.


39A-------xx

Clorox Automatic Toilet Bowl Cleaner Tablet - 3.5 Ounce, 6 Pack

How to clean the toilet from lime and urinary stone at home?

During operation, no matter how accurately its rules are observed, the inner surface of the toilet bowl is covered with bloom, which is based on mineral salts. Accumulating on the surface, such a bloom, whose color varies from light yellow to dark brown, not only spoils the appearance of the entire device, but also causes an unpleasant smell to spread. In addition, if you do not take any measures to clean the toilet from limescale, then, having grown, it can cause a decrease in the lumen of the drain of the device, which will lead to a deterioration in its performance.
Getting rid of plaque on the inner surfaces of the toilet bowl, for which you can use both special compositions and proven folk remedies, does not take much time and effort in those cases, if you do it immediately after its detection, without taking the situation to extremes.

Causes of sediment
Stone in the toilet, as it is often called, appears as a result of the deposition of minerals on its walls contained in the composition of any, even filtered water. Even if the toilet is cleared of mineral deposits, they will reappear with time, and such a process will be more intense the more often the surface of the device will be in contact with water from the drain tank. The most common reasons for the active formation of plaque on the inner walls of the toilet bowl are:

Leaking drain tank, from which water is constantly poured on the toilet wall. In such cases, plaque on the surface of the device is formed in the form of unsightly brown strips running from the point of water leaving the cistern to the toilet drain hole.
On the inner surface of the sanitary device there are microcracks and roughness, on which mineral deposits accumulate.
The toilet is often used to drain food into it. Contacts of the toilet bowl surface with hot food residues are especially undesirable, since cracks may form on such a temperature effect.
Thus, in order to spend time as little as possible on the cardinal cleaning of the toilet bowl from mineral deposits on its walls, it is sufficient to regularly maintain the cleanliness of such a device and monitor its technical condition, as well as follow the rules for operating such devices.
Cleaning with improvised and folk remedies
Clean the toilet from limescale, especially if its internal surface is not heavily polluted by it, you can use improvised means. The use of such means, some of which are able to cope even with old sediments, allows not only to save money on the acquisition of fairly expensive special compositions, but also to ensure the maintenance of the toilet bowl in proper hygienic condition.
Lemon acid
Such an inexpensive and widely available remedy, like citric acid, can be used both for cleaning limescale and urinary stone from the inner surface of the toilet bowl, as well as for removing mineral deposits from the walls of the drain tank. The process of cleaning the elements of the sanitary device using this tool is as follows:

All water is removed from the toilet bowl and its drain hole.
The surfaces on which there are mineral deposits are moistened with a wet cloth, after which citric acid powder is poured onto them. It is also necessary to pour lemongrass into the drain hole of the device, since there is necessarily a lime scale on its walls.
After half an hour, all cleaned surfaces are treated with a brush, and then thoroughly washed with clean water.
Acetic acid
With the help of table vinegar, which is based on acid, it is possible to remove limescale and rust from the surface of the toilet bowl, urinal, and sink. Since the acid content in such a tool is low, it can even be used to take care of sanitary devices connected to the sewage system through plastic pipes.
To clean the plumbing with table vinegar, proceed as follows:
All the water in them is removed from the drain holes of the sanitary devices, and their cleaned surfaces are wiped dry. To free the drain holes from the water, in such cases, you can use a plastic cup or rag.
Contaminated surfaces that need to be cleaned are wiped with a cloth moistened with vinegar.
The toilet lid is closed and left in this state for 5-6 hours. It is best to leave the toilet-treated toilet overnight so that all the mineral deposits present on its inner surface can dissolve better.
After the above time, the cleaned surfaces of the device are treated with a brush, and then washed with water several times.
Oxalic acid
One of the most popular tools used for cleaning plumbing from lime and urinary stone is oxalic acid, which is inexpensive and is sold in many hardware stores. The algorithm for applying such an agent, which is a white crystalline powder, is as follows:

The walls of the device to be cleaned are moistened with a wet cloth, after which oxalic acid powder is applied to them, for which you can also use a cloth. If you also need to clean the walls of the drain hole from limescale and urinary stone, then the acid is poured into it.
After 15-20 minutes, the places of pollution are treated with a brush, after which they are washed several times with water, blowing it out of the device’s drain cistern.
You can repeat the procedure described above several times if the contamination on the walls of the plumbing fixture is too large and is not removed after a single application of oxalic acid.
Baking soda
To help get rid of plaque on the walls of the toilet, if it is not very old, can the usual baking soda. When used as a cleansing agent, soda is poured onto the pre-moistened places of dirt, wait for a while, and then the surface is treated with a brush and washed several times with water from a drain tank. In order to make the result of using soda as a cleansing agent more impressive, it can be used together with vinegar, which is done as follows:
Vinegar, using lockable dishes, heated to a temperature of 500, then add soda to it.
The resulting solution is poured into contaminated places and left on them for some time.
The surface to be cleaned is treated with a brush, and then washed with water. After performing this procedure, the surface of the toilet can be further cleaned with clean soda to fix the result.
Coca Cola
Remarkably, such popular beverages as Coca-Cola, Sprite and Fanta can also be used to clean toilet walls from limescale and rust. Such properties of these drinks are explained by the fact that they contain citric acid, which acts as a decomposition on such contaminants.

The process of cleaning plumbing using popular carbonated drinks is as follows:
2-3 bottles of aerated drink containing citric acid are poured into the toilet bowl that was previously freed of water. Pour a drink should also be the walls of the device and the space under its rim.
After waiting for 2-3 hours, the surface to be cleaned is treated with a brush, then washed with clean water.
Chemistry on guard of purity
Today there is a large variety of chemical products on sale, with which you can effectively remove mineral deposits from the surface of sanitary devices. Among themselves, such tools differ in both chemical composition and application features, which must be considered when choosing them.
Orthophosphoric acid
Phosphoric acid, which is mainly sold in automotive stores, copes well with the removal of lime and urinary stone, but it does not adversely affect the rubber and plastic elements of sanitary devices and sewer systems.
To perform cleaning with orthophosphoric acid, it is treated with contaminated places, then close the lid of the toilet bowl, wait about 15 minutes, then wash the cleaned surface with plenty of water from the drain tank.
To enhance the effect of the use of this tool, particularly contaminated places can be further treated with a brush.
Hydrochloric acid
Apply hydrochloric acid, which is a powerful cleaning agent, it makes sense in cases where mineral deposits on the walls of the toilet and in its drain hole are long-standing in nature. You can not use this tool in cases where the toilet is connected to the sewer system through plastic pipes and fittings, which from the interaction with such a strong acid can simply become useless.

To clean the toilet bowl with hydrochloric acid, it must be mixed with water in equal proportions, pour the resulting solution into the bowl of the device to be cleaned and its drain hole, wait 10 minutes, then wash the plumbing with a large amount of clean water.
Bleach
Bleaching powder is one of the most traditional means by which you can not only clean the plumbing device from the old raid on its surfaces, but also effectively disinfect it, destroying most of the harmful organisms. Cleaning plumbing using this tool is performed in the following sequence:
a package of chlorine is poured into the bowl of the device and left in it for the night;
The cleaned surface is treated with a brush and washed with plenty of clean water.
Cleaning powders and pastes
The most popular powder products specifically designed for cleaning toilet bowls and other plumbing devices are Pemolux and Komet. Such means are most effective in dry form, therefore, before using them, the plumbing device must be wiped dry and all the water must be removed from its inside.
After the completion of the preparatory procedures, the powder is poured onto the contaminated surface, it is kept on it for some time, after which, using a brush, a stiff brush or a sponge, they begin to perform the cleaning process itself. After cleaning, the plumbing surface should be washed with plenty of clean water.

For cleaning toilet bowls from limescale, you can use special pastes, which, in addition to the active substance, corrodes mineral deposits, include abrasive particles. The principle of using such pastes is quite simple: they are applied to the contaminated surface with a sponge, wait for some time, and then begin cleaning, practically rubbing off the surface of the device mechanically.
Liquids and gels
The efficiency of using special fluids and gels for cleaning toilet bowls is explained by the fact that chlorine (Domestos, Whiteness, etc.) or acid (Toilet Duckling, Bref, etc.) form the basis of the majority of such products. Gels are more effective and convenient in use, because at the expense of their thick consistency, they flow more slowly along the walls of the toilet bowl to be cleaned, respectively, affect the surface longer, dissolving the impurities present on it.
Both liquid and gel cleansing agents use the same principle, which is as follows:
means put on the polluted surface;
give it time to dissolve lime;
scrub residues with a brush or a hard sponge;
perform a thorough flushing of the device.
Most of the above listed chemical cleaners are highly toxic, so when using them you should take care to protect the skin, eyes and respiratory system.
Preventive control measures
Not to be in situations where the surface of the toilet bowl needs to be cleaned of mineral deposits, or to be in them as rarely as possible, can help preventive measures to combat such pollution, which are as follows:
Regular, performed at intervals of at least once every two weeks, cleaning the device with the use of gentle means - special liquids and gels. The frequency with which it is necessary to perform such a procedure is determined by the number of regular users of this sanitary device.
At each sink, if there is a need for this, you should use a brush to clean the surface of the device from the impurities formed on it.
Do not allow leakage of the tank, timely carry out its repair and adjustment.
Use special tablets placed in the drain tank of the device, and gel blocks, fixed under its rim.


38A-------xx

Optimal 12 Count Automatic Toilet Bowl Cleaner Tablets, Bleach & Blue (3 Packs)

How to clean the toilet from lime?

The toilet provides a comfortable life in any apartment, but if it is used for a long time, a lime deposit may occur on it. He does not appear in one day. The raid does not harm human health, but will look very ugly. It is necessary to understand in detail how to clean the toilet from limescale, using methods available to all.
Causes

Even if you often flush the water in the toilet, there may appear limescale. The main reason is organic chemistry. If the surface is rough, the deposit there accumulates quickly enough. Of course, urea remains, but there are fewer such traces. It is from the flowing water that lime comes to the surface, which interacts with the urine and as a result remains inside as a bloom.

If people often flush behind themselves after using the toilet, a lot of water passes through the toilet and pollution appears very quickly. The situation is complicated in cases where there are problems with the cistern. Water flows constantly, which leads to a strong plaque. Of course, the liquid is filtered, because it gets into the tank from the faucet. However, lime has very small components that penetrate through the filters without any problems. These components are so small that they cannot be seen, but they can accumulate and create problems.
Fundamental rules

To clean the plumbing was as efficient as possible, you should consider certain rules. Otherwise, you can even damage the surface or damage your health. The rules are as follows:

remove all water from the toilet bowl beforehand. It can be drawn using a disposable plastic glass. Then drain the bottom with a rag;
since many detergents are dangerous to mucous membranes, it is recommended to use a respirator and goggles;
plumbing should be cleaned with rubber gloves. Thanks to them, the skin of your hands will be protected from aggressive detergents. Of course, hygiene is also important, because the toilet is far from the cleanest place in the house;

after applying liquid products to the surface, you need to leave them for some time (to find out exactly how long you have to wait, carefully read the instructions);
After preparing the plumbing, use the selected tool. Just pouring the powder on the surface will not be enough. It is recommended to use a stiff brush or brush (however, the cleaning tool should not be made of metal, otherwise you may damage the enamel).

It is necessary to thoroughly clean the surface, especially those places where there is too much of a raid. If necessary, add more powder in the process. When finished cleaning, flush water several times.

What to buy?

To effectively clean the plumbing, prepare the following:

brush, brush;
powder, cleaning gel;
rubber gloves;
fairly tough sponge;
plunger;
eye protection goggles, respirator.

Facilities

You can wipe off old traces using the following tools:

iodine;
hydrochloric acid;
citric acid, acetic acid;
electrolyte;
baking soda;
special means.

You can prepare a mixture of the following ingredients:

pharmacy iodine;
baking soda;
apple, nine percent table vinegar.

Vinegar

Take vinegar (200 ml) and heat it to 50 degrees. To do this, use a closed container. Add also iodine and baking soda. Completely empty the toilet from the liquid and pour the mixture there. Then you need to close it and wait about 12 hours (some leave so the plumbing for the night). Then clean the plumbing using a brush and rinse the surface with water. If there are a lot of traces, repeat the procedure.

It is also possible to apply pure vinegar to the surface . Immediately rub the treated area using a brush on a long handle or a brush.
Electrolyte

If limescale appeared long ago, to wash it, you can use the electrolyte. It contains acid, characterized by increased concentration. During work with this tool, you must use gloves, respirator, goggles. It should be very careful to pour the liquid into the toilet, so as not to splash. The tool should be on the plumbing from half an hour to an hour, not longer (the period depends on how many traces on the surface).

This tool can only be used if the pipes are made of steel. If they are plastic, you need to choose another cleaning method.

Lemon acid

To remove traces from the plumbing, clean the surface with citric acid. Enough two small packages. The same amount of money needed for a tank of water. Make sure that the liquid is not poured into the bowl of the toilet bowl.
Carbonated drinks

Today, many remove limescale by using carbonated beverages. Pour three liters of such liquid into the toilet and wait a few hours. After adding detergent, take a brush and rub the surface.
Iodine monochloride

Almost any sediment in the toilet can be removed at home using iodine monochloride. Such a solution can be purchased at a veterinary pharmacy. It is necessary to apply the product to the surface and after a while wash it with water.

This option is not suitable for sewer pipes made of aluminum or cast iron.

Household chemicals

At present, a variety of cleaning products are available to consumers: liquids, gels, creams, powders. They differ from each other in the main components. The following options are possible:

alkali;
acids;
chlorine.

Chlorine products are usually used for regular cleaning. With their help, you can disinfect and wash the plumbing equipment all the time - and not be afraid that it will deteriorate. The main disadvantage of chlorine products is an unpleasant smell, but it disappears rather quickly.

Acids can be used to remove traces that are already quite old.

Means consist of potent acids: oxalic, phosphoric, hydrochloric, formic. They should not be used too often. It is recommended not to forget about caution.

If you constantly clean plumbing with acids, the surface may deteriorate: they erode faience and ceramics. If you are going to use powder, be sure to read the instructions for use.

Oxalic acid powder can be used in one of two ways. You can mix the powder with water, pour it out and close the lid. Wait for about an hour and rinse the surface with water, get rid of any residue of the bloom with a brush. Another option is to slightly moisten a soft cloth, pour powder on it and treat the plumbing.

You can use hydrochloric acid and not oxalic acid. Having completely removed the water, pour the acid into the bowl. Close the toilet and wait 15 minutes, then rinse the surface with running water. For plastic pipes, this option is not suitable, and for steel it is possible to use one of the above acids.

Liquid alkaline solutions can be used without fear that the plumbing will be damaged. With their help, various contaminants are removed from the surface and they are disinfected. Alkaline means very well remove organic fats that clog sewer pipes, plumbing.
Varieties

Powder products help to cope with dry contaminations very well. If you are going to use them, carefully drain the drain pipe and bowl. Pre-read the instructions. For application you can use a brush or a hard sponge. It is better not to use metal products, otherwise the surface may be deformed.

Special gels and creams appeared not very long ago, but quickly became very popular. Such means allow to achieve very good results - and at the same time they are soft, do not damage the surface. It is easy to use them, you only need to take into account the recommendations that are listed in the instructions. Gels and creams can be designed for certain actions (combating certain impurities, regular cleaning) or universal.

Immediately understand that it is better to choose for cleaning plumbing in a particular case, it does not always work. To determine the most appropriate option, you need to use different gels, creams, powders or improvised means. So, you can compare the results and choose the best option.
Prevent re-occurrence

Of course, it is always better to prevent the occurrence of a problem than to deal with it. If you want to avoid limescale, do not forget about the following recommendations:

put wet wipes close to the toilet, it is very convenient to clean the outside part and the seat with their help. However, they should not be flushed away, otherwise you may encounter such a problem as blockage;
You can purchase effective tools or special pills, with which you can easily and quickly remove traces. They will get rid of lime and prevent the appearance of new layers;
repair the tank in time, so you will save on water and prevent the appearance of unsightly traces;
if necessary, remember to use a brush;
use a special non-aggressive means to clean the surface; exercise it every week, at least. The frequency depends on the number of people living in the apartment.

Clean the toilet from urinary stone and lime scale regularly. So, you not only can prevent the occurrence of an unpleasant odor in the room, but also achieve a neat appearance of plumbing. Regular meticulous processing of plumbing will ensure that various harmful bacteria do not breed.

And now we recommend to watch the video in which the housewife will tell a simple way to clean the toilet.


37A-------xx

12 Pieces Antibacterial Blue Automatic Toilet Bowl Bathroom Cleaner Tablets NEW VERSION - lasts up to 36 weeks to 48 weeks

How to clean the toilet from limescale by various means

The funny expression “toilet - the face of the hostess” is quite true, because clean, sparkling plumbing is an indispensable condition for order in the house. No matter how fashionable and expensive the repairs in the bathroom are, the yellow stains on the white faience look extremely untidy. Of course, this item needs daily care. But even in this case, over time, a layer of limescale will appear on the toilet, which is difficult to remove. Consider how to clean the toilet from limescale, using household chemicals or improvised means.

Household chemicals

In any supermarket there is at least a small assortment of care products for plumbing. They can be of several types:

Abrasive. For example, “Pemolux”, well known to older generations. First you need to scoop water from the toilet with a disposable plastic cup. Then evenly distribute the powder from the inside over the entire area and rub with a cloth until white. The disadvantage of this method is in great effort. In addition, abrasives scratch the faience surface, and in the future it on the contrary contributes to the formation of limescale.

how to clean the toilet

Alkaline. Such cleaning fluids, both expensive “Domestos” and cheap “Whiteness”, are made on the basis of sodium hypochlorite (the so-called “bleach”), which is capable of dissolving pollution. First, again, we scoop out the water, squeeze the gel onto the walls, leave it for 30 minutes and wash it off, rubbing it with a little brush for toilet bowls or a soft washcloth. This method, how to clean lime deposits, is the easiest, since there is no need to "scrub", chemistry will do everything itself.
Acidic. In "Sillite", "Utenka" and the like, oxalic, acetic, hydrochloric acids or their mixtures are responsible for combating lime. The principle of operation and technology of use are similar to alkaline.

Important! Be sure to read the instructions and wear rubber gloves when working. Be careful not to lean too close to the surface to be treated in order to avoid harmful substances on the skin and inhaling fumes. Do not use the compounds on a different basis at the same time - poisonous vapors are formed when mixed.

The decision in favor of chemistry, to clean the toilet, has its drawbacks. Effective means are expensive, in addition, almost all of them are toxic, have a pungent odor and are not suitable for frequent use, if the family has young children or are allergic. There is a risk that the baby will take a bright gel for something tasty if you forget to remove the bottles under the lock or at the moment when the solution is already applied. For the sake of child safety, it is better not to keep anything toxic in the apartment at all.

how to clean the toilet from lime scale
Folk methods

If you have difficulty with a choice, do not want to use it, or want to save money, you can try to clean the limescale with the help of ordinary kitchen products. You will need:

Table vinegar. One glass (250 ml) of 9% vinegar is heated in a microwave oven to a temperature of 40 degrees, add two teaspoons of soda. The resulting solution is applied to the dried surface of the toilet, close and leave overnight, and in the morning it is enough to clean everything with a brush and wash it off.
Baking soda. The same thing is done as in the previous paragraph, but instead of the vinegar mixture, sprinkle soda abundantly on the contaminated sites.
Lemon acid. Distribute the contents of two bags over the entire interior, after draining the toilet. Leave for three hours under the lid. During this time, limescale should dissolve. If not, repeat the procedure.
Coca-Cola or Sprite. After family holidays, often there are extra bottles of these drinks. They contain the same citric acid, so the "cola" can be used just like the usual tools for cleaning. This simple method is suitable for allergies and safe for children. We fill in several liters inside, and in half an hour it is possible to wash off.


36A-------xx

2000 Flushes 208086 Blue Plus Bleach Antibacterial Automatic Toilet Bowl Cleaner 3.5 OZ Twin Pack (Pack of 1)

How to clean the toilet from rust

Many housewives try to achieve sterile cleanliness in rooms such as a bathroom and toilet. Rust can ruin the impression of even the most seemingly clean bathroom. Rust is found in tap water and is an insoluble impurity. It gradually forms plaque on surfaces in contact with running water. At first, a slightly visible yellow bloom appears, then the color becomes more saturated.
In the end, if the toilet or sink does not wash, the surface will be completely covered with rust. It should not be brought to such a state, because rust can and must be fought.

Cleaning plumbing
For many people, tidying up the plumbing in the house is not a problem, because the shops sell all kinds of household chemicals, as they say, for every budget. As a rule, in the fight against rust help the same household chemicals designed to remove limescale. Abrasive cleaners are effective and affordable, but stains are washed only after a good job.
Powdered products can scratch the surface of the toilet bowl, which will cause rust in the future.

Alkaline household chemicals, for example "Domestos" are considered to be more common. It is quite simple to use it, it is necessary to put quite a bit of substance on the contaminated area and leave it for some time, after which you should flush the water. Alkali, which is part of, removes rust stains well and does not damage the surface of the toilet bowl, and also has bactericidal properties. It should be noted that with strong pollution this method of cleaning is ineffective.
Acidic remedies are used in a similar way. They easily remove rust, but are also aggressive, so you should wear gloves when handling them.
Folk methods in the fight against rust

Ardent opponents of household chemicals cope with ugly drips as follows.


Organic acids, such as acetic, oxalic and citric, are used. It is very easy to remove rust, you just need to cover the problem areas with a cloth dipped in a solution and leave for some time.
Similarly, you can wash plumbing with inorganic acid.
Such well-known drinks like Coca-Cola, Fanta, or Sprite help to get rid of rust on plumbing fixtures. Pour the liter of a drink down the toilet and leave for one hour. When flushing, these drinks remove even fatty solutions that form on the walls of sewer pipes.
If the stains are not old, then toothpaste will help to cope with them. Enough 4 centimeters of paste to get rid of rust, albeit briefly.
Calcium and peroxide is in every home, they can be used to clean rust in a matter of minutes.
At home, baking soda, citric acid and vinegar are suitable for cleaning the toilet bowl and cistern. They cope with possible pollution not worse than the well-known household chemicals.

How to clean the toilet from rust and the reasons for its appearance
For a start, it is advisable to consider the possible causes of this problem.
To prevent the formation of yellow stripes on the toilet is within the power of any person. It is worth paying attention to the following nuances.
Water should not go to the duct, most likely the problem lies in the drain tank. In most cases, this is an easily removable problem; simply pushing the float lever located in the tank. But, in some cases, it is necessary to seek the help of a specialist or independently change the valve.
Another reason is old rusty pipes. In new homes there are no such problems, but in old residential premises it is advisable to change the rusty pipes to new, more modern ones.
The surface roughness contributes to the accumulation of particles of rust, limescale and urinary stone. When choosing plumbing better to prefer porcelain or earthenware.
Preventive measures, performed regularly, will keep the toilet and other sanitary facilities in the house clean. With such work special tablets cope, which should be placed in the toilet bowl. They gradually dissolve in water and prevent possible contamination.
Some tips on "How to clean the toilet from pollution"
It is necessary to clean the toilet with hand movements from top to bottom. If you do the opposite, the water in the toilet will be dirty, which contributes to the transfer of bacteria to already clean surfaces. Finish washing the toilet should be cleaning the outer surface and do not forget about the tank.
Oddly enough, effective is considered to be a glass cleaner. This method of cleaning the toilet is rather the final stage. Inside, the toilet should be flushed with clean water, and the outer walls and cistern should be wiped with a dry cloth.
These simple tools and rules will keep the bathroom and toilet clean and tidy. Sterility can be achieved, the main thing is to make every effort and the result will not keep you waiting for a long time.


35A-------xx

Lysol Click Gel Automatic Toilet Bowl Cleaner, Lavender, 4ct

The best cleaning products for the toilet

The toilet room and its cleanliness - this is what is the best way to say about the accuracy of the hostess of the apartment. On the modern market there is a rich assortment of all kinds of substances that easily remove plaque and give neatness and gloss to the bathroom. Toilet bowl cleaners triumph over germs and clean the faience surface. In addition, they greatly facilitate cleaning, making it simple, but quite effective.
The main types of pollution toilet bowls
Depending on the type of pollution, you must use the appropriate detergents.
Giving the toilet cleanliness is the primary task, which is not too difficult to realize. It is important to regularly pay attention to this accessory, otherwise you can wait for such a situation when the dirt is densely injected, and it will be incredibly difficult to get rid of it.
It should be noted that usually the following contaminants appear on the surface of the toilet bowl, which must be cleaned by the housewives:
lime scurf that occurs when tap water has a high salt content and high levels of hardness. To combat it you need to use toilet cleaners that contain alkaline substances;
rust may occur in the case when the pipes through which water flows to the bathroom are not new and clean. Acid can handle it;
Domestic pollution that is deposited on the surface is removed with substances called surfactants;
the bad smell that breeding bacteria cause is quickly and easily removed by bleach, as a rule, it contains most of these products. In addition, they contain fragrances that perfectly mask any fragrance.

Gel is an economical and easy-to-use toilet cleaner.
It is worth noting that to combat the pollution of sanitary products such substances and means are used:
Chemically active, which pretty quickly tidy up the toilet bowl surface:
gel: perfectly applied to the surface of the toilet, moreover, its structure allows, slowly spreading, to take with it all the germs and bacteria. As a rule, for the convenience of applying such substances a bottle is used with a spout that is bent at a certain angle, which allows you to direct the flow of funds even to hard-to-reach places;
liquid: less economical means that quickly drains into the water;
powder: you have to constantly rub into the walls of the product, seeking their purification. Therefore, they are not very convenient for cleaning;
cream: gently removes plaque without damaging the surface of the earthenware. Unfortunately, manual application deprives him of consumer popularity.
Preventive, the main task of which is to prevent pollution:


tablets, washers or cubes that need to be attached to the toilet so that the drained water passes through them, ensuring the release of detergent and refreshing particles;
Magnetic rings, which must be installed directly in the drain tank. They have a high cost, but at the same time effectively dissolve pollution.
Folk remedies that have not the worst ability to deal with unpleasant phenomena:
soda;
vinegar.
Choosing a tool that helps effectively bring cleanliness in the bathroom, you should, first of all, pay attention to the most economical, which, moreover, can be used without much effort.
The best tool for cleaning the toilet

Acid or alkali in the composition of the cleanser helps to get rid of rust.
Any woman who manages the household is faced with the need to make a decision and choose the best toilet cleaner that removes plaque and gives the entire room the smell of freshness and cleanliness.
It should be noted that the correctly chosen cleaner copes with such problems:
removes impurities that appear during the operation of the product;
dissolves limescale;
removes rust marks on the surface;
disinfects the toilet.
To achieve the goals in the composition of the cleansing substance are the following ingredients:
Surfactants that combat organic pollution and are necessary for high-quality toilet bowl cleaning. As a rule, the safest species is considered to be non-ionic.
Acid or alkaline compounds that allow the dissolution of rust molecules, as well as plaque, which is quite often formed on the walls of the product. It should be noted that it is necessary to handle them with extreme caution so as not to get burned hands or mucous membranes.
Chlorine compounds that allow you to destroy bacteria and sanitize the bathroom.
To date, the most popular, and, therefore, effective, are considered such brands:
Cillit Bang. This toilet cleaner is created in the form of a gel, which makes its application simple and convenient. In addition, the tank is equipped with a spout that allows you to bring the substance to the most inaccessible places.

This gel contains hydrochloric acid, which dissolves and removes all contaminants, including rust. However, they must be worn when wearing gloves to prevent chemical burns.
The advantages of using Cillit Bang gel can be noted:
high efficiency;
minimum level of expenditure;
ergonomic packaging facilitates application.
Disadvantages of Cillit Bang Gel:
not the lowest price;
the tool is not equipped with a lid that children could not open.
Domestos. This tool for toilet bowls is also created in the form of a gel, which perfectly copes with quite complex types of contaminants. The acid which is in its structure perfectly dissolves rusty spots, and also fungi and bacteria.

This gel has important advantages:
its consistency is rather viscous and viscous, which makes it possible to evenly distribute it over the entire surface of the toilet bowl;
the lowest possible consumption of the substance with effective cleansing;
equipped with protection against opening by children.
Minuses:
presence of persistent and pungent odor.
"Comet 7 days of purity." This gel has the ability to keep cleanliness in the plumbing under control for a whole week. As the manufacturer notes, it is enough to apply it once, after which he copes with maintaining order for 7 days. The tool works due to sulfuric acid, which is in its composition.

Be sure to emphasize the following advantages:
the ability to remove any contamination;
low consumption with high efficiency;
small price;
prolonged protection plumbing;
a lid that children cannot open.
Disadvantages of cleaning agent:
quite a strong smell of chloride component.
"Toilet duckling". A gel that works on the basis of hydrochloric acid, thereby combating persistent stains.

It may be noted its advantages:
the presence of a spout that allows you to apply a tool under the bezel;
pleasant aroma;
affordable price;
effective fight against bacteria;
protective cap.
Disadvantages:
medium consistency, because of which the tool is consumed fairly quickly.
Sanox Ultra. A fairly good drug, it is produced by a domestic factory, which determines its low cost, and the effectiveness does not suffer from this at all. The active ingredient removes rust and plaque well, and it smells pretty good.

Advantages of "Sanoks Ultra":
low price;
effective work;
the presence of fragrances.
Disadvantages means:
not too thick texture;
packaging that does not have protection from children and a bent nose.
We clean the toilet with folk remedies

In the hardware stores there are various means for cleaning toilet bowls, which have differences not only in their cost, but also in their level of efficiency. Nevertheless, each hostess is quite capable of cleaning the plumbing, using the available folk remedies that are found in the house.
The most popular in the fight for the purity of the toilet recognized such methods:

Vinegar. The most common and gives excellent results due to the fact that it is an acid. Apply it as follows:
apply on walls and leave to affect for a period of from 20 to 30 minutes;
wash off with plenty of water.
Soda. Well washes deposits and plaque due to its abrasiveness. It should be applied to the walls of earthenware. In addition, it has an important ability to clean sewage.
Lemon acid. Allows you to clean the surface of the toilet bowl easily and simply. It is enough to apply it to the surface, after which it will be possible to get rid of both the annoyed plaque and the majority of microbes.
White. It contains chlorine and works great in cleaning the toilet. It must be applied in the evening to the substance worked throughout the night. After that, wash off the composition with water and not worry about the presence of bacteria.
DIY Toilet Cleaner


Craftsmen have long developed their own toilet cleaner, which with the maximum degree of efficiency can cope with various problems, including bacteria, dirt, plaque and unpleasant odor, while there are very few. In addition, such a substance will be as safe as possible for people living in the house, especially if they have all sorts of allergies, and pets.
How to cook it? You need to take some essential oils, vinegar, starch and salt. If the components are selected in the right quantity, you can hope to create a tool that will perfectly cope with all the problems of plumbing and caring for it.
Creating a toilet cleaner includes the following steps:
Put 3 teaspoons of coarse salt in a bowl and mix them with 3 tablespoons of starch.
Add to the resulting mixture 1/2 cup of water, then mix everything thoroughly.
Put the bowl on the stove and cook until thick, without ceasing to thoroughly knead its contents.
Remove the container from the heat and add 15 ml of vinegar and a little ethereal smell with any aroma.
The mixture will be very thick, now you can make a ball out of it, which you need to leave for the night, then attach it to the toilet using wire or other improvised objects.
This completely simple procedure for preparing a toilet cleaner can make the owners happy with an excellent result with minimal cash outlay.
Read more:
How to remove the urinary stone in the toilet folk remedies
Than to clean the toilet from rust and plaque with his own hands
How to clean the sewer at home
How to clean the toilet from clogging
How to clean the toilet from limescale
In conclusion, it should be emphasized that with a modern range of products in hardware stores that offer a wide selection of various cleaning products, it will not be difficult to clean the toilet. Nevertheless, keeping it clean regularly minimizes labor and costs, and also saves comfort in the home and the health of its inhabitants.


34A-------xx

Scrubbing Bubbles Toilet Gel, Rainshower (2 dispensers + 30 Gel Discs)

How easy it is to clean the toilet from clogging

Everyone can face an unexpected problem of stagnation in the toilet. Delay the repair of plumbing is not worth it. Consider the signs and causes of congestion in the toilet and learn how to remove the blockage in the toilet with your own hands.
Understand that the toilet is defective by the following features:
dirty water after draining does not completely leave the toilet;
unpleasant odors appeared in the toilet;
when draining, the water fills the toilet bowl by about half;
the water goes very slowly down the drain.

In the case when at least one of the listed signs is present in your toilet, it is safe to say that it is clogged and you need to clean the drain.
Causes clogging toilet
Foreign objects got into the toilet. For example, at the same time a large amount of toilet paper was flushed or the toilet was clogged with cat litter.
Improper installation of plumbing equipment.
Errors manufacturer in the manufacture of the toilet. Poor design of the sewer system.
The toilet does not have the necessary valves or a funnel.
What to do first

When the toilet is jammed, you need to call the emergency service and call the plumber to clean the plumbing equipment and sewage system with the help of professional equipment.
Or try to eliminate the blockage in the toilet yourself with your own hands.
We clean the clogged toilet using a plunger

Eliminating the mash with a plunger is related to the mechanical method and is suitable for removing the plug. If you assume that a foreign object (children's toy, rag) is in the toilet, it is better to remove it before you start working with the plunger.
You can get items wearing rubber gloves. Otherwise there is a risk to push the garbage further along the pipe and block the operation of the sewage system. Vantuz - an effective remedy for clogging the toilet.
Before starting, close all drain holes (bathtub, sink).
Place the plunger in the toilet drain hole. Pour five to six liters of water on top so that the rubber part of the plunger is completely covered.
Pump the plunger at least ten times up and down. Movement should be sharp, but uniform. If the water goes, then everything is done correctly.
We eliminate the clog of the toilet with a plastic bottle

Quickly get rid of a blockage in the toilet can be improvised. For example, using an ordinary plastic bottle with a cut-off bottom and tightly twisted cap.
The device must be carefully and slowly put into the drain.
As soon as you feel that the air is pushing the bottle back, press it sharply until the very end of the drain hole. After that, with a sharp movement remove the bottle from the drain.
The water will go away and the mash will disappear if the procedure is repeated two or three times.

We clean the toilet with a solution of soda and vinegar

Vinegar and soda will help to break through uncomplicated blockages in the toilet. You should not apply this method of cleaning if the corrugation (the connection of the toilet bowl and the pipe) is made of plastic. Hot water with soda and vinegar can spoil the thin plastic.
With the help of vinegar and soda, you can quickly and effectively clean the toilet from such contaminants as fat plug and food residue.
Take half a pack of baking soda and pour it into the drain hole.
Prepare one glass of vinegar and pour it into the toilet bowl.
Wait half an hour and pour 3-5 liters of boiling water into the drain.
Night cleaning toilet soda

Soda can clean the toilet and sewer system.
In the evening, pour a pack of baking soda into the toilet.
Fill the toilet bowl with boiling water.
Cap the drain using a stopper or wet cloth.
In the morning, rinse the drain with hot water.
How to break a blockage with a cable

The use of a special sewer cable will help to quickly and efficiently get rid of the blockage. It is better to work together.
Prepare unnecessary rags, oilcloth, bucket or basin with water and dishwashing detergent.
Roll the oilcloth over the floor and cover the walls.
Lower the end of the cable into the drain hole and slowly move it down with a rotating motion.
After the cable has rested and does not go further move it back and forth.
Pull the cable down to the oilcloth. Clean with a cloth moistened with dishwashing liquid to remove unpleasant odors.
What to do if the toilet is clogged with paper or cat litter

It is better to remove the stopper from the contents of cat litter or tamped toilet paper using a plunger. Before cleaning the toilet bowl, it is recommended to take out the garbage with gloved hands and pour five to ten liters of boiling water into the toilet bowl. Hot liquid partially dissolve contamination.
Remove the mash with sandbags.

With the help of a bag filled with sand it is possible to pierce the mash formed in the drain.
Tie a sandbag tightly and tie a strong rope to it.
Dip the bag in the drain, dropping all the water out of the tank. At the same time, release the tied rope so that the water carries the bag into the drain hole.
Pull the pouch out of the hole in the toilet bowl with a sharp movement.
After the tank is refilled, repeat the procedure.
We use chemicals

In the case when you did not manage to remove the mash in the toilet using gentle methods, you will have to use chemicals.
When using this or that tool for cleaning the toilet, be sure to follow the manufacturer's instructions. Depending on which pipes in the toilet (plastic or metal), choose a suitable tool.
If the above folk methods did not help to eliminate the stagnation in the toilet at all, immediately contact a specialist!
Read more:
Toilet bowl cleaners
How to clean the toilet from lime scale
How to clean the bathroom pipe at home
How to clean the toilet from rust
How to clean the urinary stone toilet at home
Tips

Do not throw foreign objects, household waste or food residue into the sink.
It is not recommended to throw used paper into the toilet.
Do not drain the water with floating debris in it.
Use prophylactic agents to prevent congestion.
Replace old, rusty pipes in time.


33A-------xx