Damn broken tank ... I'm sure you'd like to know how to fix the tank, because it keeps dripping, and that dripping noise from the head ... and over spending water ... It's time to do something!
American Standard 3068.001.020 Evolution 2 Elongated Toilet Bowl Only with Right Height Bowl, White
Sure you have not changed the toilet flushing system ever, and it's about time to do it. You can call "daddy hands", or become a Super Mario for a moment and do it yourself. It really does not make it necessary to know about plumbing to fix a dripping cistern, it has leaks, and it does not stop flowing. With our advice, in 10 minutes you will have fixed the tank. We start?
Prerequisites to fix tank
The system of discharge of the cistern is very simple: When "strips of the chain", a valve is opened to let out the water. This water comes from the reservoir of the cistern, which will then gradually be refilled. When the float that we can see inside it reaches a certain height, it acts as a closure so that water does not continue to enter the cistern.
Causes of leakage in the toilet cistern
When you notice that the cistern does not stop coming out, it is that it has a leak, and always water comes out. The first thing that needs to be done to fix the cistern is to determine the causes:
- - It may be that the filling valve does not seal properly and allows a little water to pass through. It is located in the lower part inside the cistern tank.
- - It may be problems with the float. The float of a toilet is connected to the valve of the float, through a rod. This connection is carried out by means of a screw, which we can open and close manually.
- - Leakage due to slit or deterioration of the base of the toilet. In this case, a small puddle of water appears on the foot of the toilet.
- Solutions to fix toilet cistern
- - If the filling valve fails:
The first thing we have to do is close the stopcock. Next, we unclog the cistern tank.
Now and with the help of a spanner or a clamp and a clamp we remove the flexible or tube that carries the water to the tank. We must buy a valve for our tank, that is, we must take into account whether the water intake is lateral or the bottom of the tank. In any hardware store or DIY center we can buy it with the characteristic of our toilet. It is very easy to assemble.
We begin with the installation, we must use the accessories that we have removed from the previous valve (ring, trims, ...). The procedure is the same as to remove it but in reverse. Once installed in the tank, we will put teflon in the mouth of the water intake of the new valve, to avoid possible water leakage.
In the video you have all the detailed steps to fix this failure of the tank:
- If what's wrong is the cistern float:
If the problem lies in the cistern float, we must change it. To do this, we close the stopcock, pull the chain to empty the water tank. With a wrench we unscrew the external hose that connects the stopcock with the float. The thread for this step is located on the side below the cistern.
We also remove the plastic nut from the float and we can remove it.
Go to a hardware store or mall with these pieces, so they give you the same.
When you have the new pieces, you just have to put them in a simple way, twisting and fixing with a nut.
Problem solved! Cistern without leaks and like new:
- Fix leakage of water through the base of the toilet:
Clean the base of the toilet thoroughly, with medicinal alcohol. Do not use other types of products that can leave a greasy film. After this, apply silicone around the perimeter of the toilet.
We already have our cistern fixed and without leaks. Still do not have time to fix the tank? Do not worry, you can find a cheap plumber through Helpy .