Friday, April 26, 2019

HOME AND GARDEN: How to remove tartar stains from the toilet

HOME AND GARDEN: How to remove tartar stains from the toilet

How to remove lime stains from the toilet bowl If the water in your home is hard, you will notice a rough, whitish substance in your toilet bowl. This is accumulation of lime. The scale of lime results from the remaining deposits of hard water. The buildup of lime scale on the toilet bowl makes the toilet dirty and stained.

Toilet Bowl Ring Remove Product

You can remove lime scale from the toilet bowl with common household items.

You will need to
  • Toilet cleaner
  • Brush to clean the toilet
  • pail
  • Water
  • 1 gallon (3.78 l) of white vinegar
  • Paper towels
  • Borax powder


Instructions

  1. Remove as much water as possible from the toilet bowl. Close the valve behind the toilet to stop the flow of water. Pull the chain a couple of times until the cup is empty.
  2. Clean the inside of the toilet bowl with toilet cleaner. Apply a generous amount of cleaner and scrub the bowl with the toilet brush. This will make part of the lime stains come out but it probably will not remove everything. Throw a bucket of clean water into the bowl to rinse the cleaner.
  3. Throw 1 gallon (3.78 l) of white vinegar into the toilet bowl. If this is not enough to cover all the lime deposits, wet paper towels and vinegar and place them on the lime stains. Leave the vinegar in the toilet bowl all night.
  4. The next day, remove the paper towels. Use the brush to clean toilets and skirmish to remove lime deposits that have become loose. Clean the toilet by throwing a bucket of water into the toilet bowl. Inspect the toilet bowl to see if there is any lime stain.
  5. Use borax powder if the spots do not come out. Spray a good amount of borax directly on the affected areas of the toilet bowl. Leave it for 30 minutes and then scrub with the toilet brush. Rinse the cup with a bucket or two of water.

Tips and warnings
  1. Chlorine bleach can also be used to remove limescale. Pour 1/2 cup of bleach into the toilet bowl or soak paper towels in bleach and place them on top of the lime stains. Leave the product on the spots several hours before scrubbing the cup and rinse it with water.
  2. Do not forget to reopen the water valve when you have finished cleaning.
  3. Use a toothbrush to clean toilets that has plastic bristles so the cup does not get scratched.
  4. Use rubber gloves when using bleach to protect your skin.
  5. Never mix chlorine bleach with ammonia or products that contain these ingredients since the result can be toxic.



How to remove the dark circle around the toilet bowl OTHER METHOD

You will need to

  • 12 oz (354 ml) of cola drink
  • A brush for toilet
  • 1 cup of white vinegar
  • Sodium bicarbonate

Instructions

1-The tail effectively removes stains from the toilet.
Pour 12 oz (354 ml) of glue into the stained toilet bowl and clean it in circles with a bath brush. Leave the glue in the toilet water for an hour to remove the mineral stains.

2-Unload the toilet to wash the glue and loosen the brown rings and spots. Scrub the sides to remove mineral deposits removed by the tail.

3-Add 1 cup of white vinegar to the toilet water to dissolve the rest of the stains. Sprinkle baking soda over the brush to add a mild abrasive.

4-The scraping action of the toilet brush helps in the cleaning process.

Rub the surface of the toilet bowl with the brush covered in baking soda to remove the remaining stains. Discharge the toilet to rinse the surface.

Tips and warnings

  • Add 1 cup of white vinegar to the toilet bowl every week and let it sit overnight to remove stains and freshen the toilet bowl.
  • Substitute for lemon juice to remove spots of lime deposits and minerals inside the toilet.



How to eliminate brown mold in the toilet


You will need to
  •  Whitening tablets for bathrooms
  • Rubber gloves
  • A bathroom brush
  • A toilet cleaner
  • 1 gallon (3.78 liters) of bleach


Instructions

1- Collect the elements that will help you clean. Any supermarket or pharmacy will have what you need.

2 - Pre-treat the toilet for an entire night. Brown mold usually gets together and grows in the pores, which makes it harder to remove. The best method to pre-treat mold is to wash the toilet. Pour half a gallon (1.89 liters) of bleach into the toilet and into the upper water tank and let it work overnight. Do not use the bathroom or throw the chain while you are following this treatment. Let it settle for at least eight to 10 hours or more. Make sure you close the toilet lid and the bathroom door, so your pets can not enter. Also, if you have a fan inside the room, turn it on so you can run more air.

3 - Flush the toilet. Put on rubber gloves and apply a generous amount of toilet cleaner. Scrub until you have removed all the mold left. The bleach will kill the most part and then the circular movements that you will make with the brush will take care of the rest.

4- Pull the chain several times until all chemicals are gone.

5- Treat the toilet again and scrub if necessary. Follow steps two and three.

6-Add a chlorine tablet to the toilet and water tank to prevent mold from returning.

Tips and warnings

It may take several applications of bleach and scrubbing sessions to remove and eliminate brown mold.
Always wear rubber gloves as protection when dealing with industrial-grade chemicals.


Natural products to remove scale from a toilet


White vinegar

White vinegar is a common product used to remove tartar from bathroom surfaces, including the inside of the toilet bowl, because white vinegar is a weak acid that will work by removing hard, alkaline water and stains from debris. of soap. It is not toxic and is completely natural. White vinegar also kills bacteria and other contaminants. To use, add 1 cup of white vinegar to the water in the toilet bowl. Leave to rest during the night before scrubbing the tartar and pull the chain. As an alternative, remove all the water from the toilet bowl and cover the tartar with cloth soaked in white vinegar.

Lemon juice

Another mild acid that dissolves the mineral deposits from the residue of hard water or soap scum is lemon juice. To use it, empty the toilet and apply the lemon juice to the tartar. Let it rest for at least 30 minutes before scrubbing the tartar with a bath brush. Rinse the area by pulling on the chain. Lemon juice will not harm porcelain or fiberglass toilets.

Pumice

Pumice stone is a natural stone that is abrasive and strong enough to remove scale from the toilet without scratching it. To use it, submerge the pumice stone in water so that it softens a little. Never use a dry pumice stone, as it can scratch the toilet. Rub the tartar stains until they run out. Rewet the stone as often as necessary to keep it moist while you work. Rinse the area with clean water.

Tartar prevention


Tartar will develop naturally in the toilet because hard water minerals accumulate on the surface. Soap residue could also accumulate and contribute to tartar stains. Prevent tartar by installing a water softener in your home. Also, scrub the toilet every week to eliminate the minute buildup and make sure the buildup does not reach a point where it is difficult to remove.