Wooden beds can be set up again an eye for the expensive if you head to the store for one, and do not even think of a handmade bed frame, if you're on a budget. If you have your heart set on a wooden bed frame, try your woodworking skills and make your own. Building a sturdy, attractive wooden bed frame is not as difficult as many might think, and it does not require expert knowledge of carpentry either.
WEEKENDER 14 Inch Folding Platform Bed Frame - Extra Storage Base for All Mattress Types - Full
Instructions
1 Cut the wood 2 by 8 in two lengths of 79 inches and two of 54 inches for the frame of the full-size wooden bed. Cut 2-by-4 lumber into four 54-inch lengths for the mattress support slats of the bed frame, in two lengths of 30 inches for the final bed legs and two 60-inch lengths for the legs of the bed. the bed with the head. Cut five 2-by-4 lengths into 58-inch boards, two for the stirrup and three for the headboard. Cut the plywood into a 54-by-75-inch mattress support board. Sand all the boards.
2 Mount the 2-by-8-inch planks in a rectangular frame. The ends of the 54-inch planks should be on the inside edge of the 79-inch planks to form 90-degree corners. Follow two screws through the sides of the 79-inch plates on the 54-inch butt boards.
3 Insert the four 54-inch mattress slats through the bed frame. There must be two staples with the ends of the frame and two equal distances in the center, all four flush with the bottom of the frame. Follow two screws through the part of the frame at the butt ends of the mattress fixing systems.
4 Turn the bed frame on its side so that one side is facing up. One end position I ask for legs and one of the legs of the head bed on the side, with 10 inches of both legs protruding over the bottom of the frame. Pull the four bolts through each leg in the frame of the bed to secure them. Turn the bed frame over on its other side and fix the remaining legs.
5 Insert two of the 58-inch planks between the final bed posts, the first of which is 3 inches from the top of the posts, the second 3 inches from the first. Clamp in place then drive two screws through the sides of the bed posts into it from the ends of the 58-inch planks. Repeat with the headboard and the remaining three 58-inch planks.
6 Insert the wood plugs into the visible screw holes then varnish the bed. When the frame is dry, place the laminated wood mattress support on the mattress fixation systems to finish the frame of the bed.