Clorox Automatic Toilet Bowl Cleaner Tablets with Bleach - 4 Count (Pack of 2)
How to clean the toilet from urinary stone, rust and other deposits: the pros and cons of various methods
Perfect cleanliness in the bathroom is possible, but it requires a lot of effort. This is sure most housewives. However, if you know the nature of the pollution that appears inside the plumbing fixtures and use well-chosen tools to deal with them, the task is much easier.
Talk about how to clean the toilet quickly, efficiently and without cost.
Three main enemies of toilet cleanliness
The toilet flashing with purity is the pride of any hostess. Only now, unfortunately, as such, it remains not for long. Shortly after cleaning, unpleasant ginger stains may appear on the surface of the equipment.
These are stains of rust, the product of oxidation of iron or other metal alloys. It seems that she has nowhere to take in the toilet, which is made of ceramics using plastic parts.
However, there are several causes of rust. The first is the poor state of engineering communications. The old lines were made of non-galvanized metal, which eventually inevitably corrodes.
Particles of oxides fall into the water, which leaves a rusty mark on the surface of the equipment.
Among the common causes of rust stains are also enriched with iron water entering the water supply system, and leakage of fluid from the tank.
In addition to rust marks on the surface of the toilet leaves limescale . The intensity of its formation depends on the composition of the water used in the plumbing system.
It necessarily contains various mineral compounds that settle on the walls of the toilet bowl and form an unpleasant hard grayish bloom. The more lime compounds in the water, the faster plaque appears.
And the third “enemy” of sanitary equipment cleanliness is a urinary stone. It is formed like a lime scale, the only difference is its composition. Stone is formed from minerals contained in human urine.
When inaccurate use of the toilet or with an irregular flushing of the remnants of urine linger on the surface of the toilet bowl, forming a solid bloom of an unpleasant brown-yellow color.
Toilet bowl cleaning
Ideally, for each type of toilet contamination should use a special tool, so it is easier to cope with them. But universal solutions can also be useful.
Thus, there are three main types of pollution of the toilet. They differ significantly from each other in their chemical composition, respectively, it will be possible to get rid of them with the help of various means. Although there are universal cleansing methods that will help in all cases.
I would like to note one more thing. All types of pollution first of all begin to be deposited where the surface of the toilet bowl has become rough or microcracks have appeared.
Most often, ceramics lose their smoothness after contact with excessively hot liquids or objects. It is not very useful for the toilet and sudden temperature changes, as a result, microcracks can appear.
You need to know that low-end models of plumbing produced from the usual sanitary faience with a fairly high porosity. Such material is prone to accumulation of pollution. It is better to purchase equipment from sanitary porcelain, which is characterized by increased surface smoothness.
How to start cleaning?
Whatever method of cleaning the toilet bowl was chosen, we should not forget about the preparation stage. First of all, care should be taken to protect. All work should be carried out only in rubber gloves.
They will protect the skin on your hands from aggressive cleansers, and you should not forget about basic hygiene. Toilet bowl - a place of accumulation of pathogens.
Toilet Cleaner
When working with aggressive chemicals, the use of rubber protective gloves is mandatory. Otherwise, you can earn allergies or dry out your skin.
For the same reason, it is advisable to wear an oilcloth or plastic apron. It is good that it covers as large a surface as possible. So it will be possible to prevent the ingress of germs on clothing. If it is intended to use aggressive chemistry, do not neglect the respirator. The airway must also be protected.
And a few more words about security. Try to ensure that cleaning solutions do not fall on the skin, and especially the mucous membranes. If a drop of funds still fell on them, you should immediately wash them with water.
When working with products with a pungent smell, always leave the door to the toilet room open. Similarly, should be done in the case when the interaction of cleaning agents produces gas.
Cleaning the toilet, it is desirable to begin with the removal of water. It is necessary to scoop out of the device and pour it. For this it is very convenient to use a bucket with a long handle. Only then can you begin to apply cleaning products.
Fighting pollution with folk remedies
Not all housewives are ready to use aggressive chemicals in the struggle for cleanliness and prefer to use softer "folk" means. There is nothing wrong with this, especially since these methods are quite effective.
Especially in the early stages, when the raid and the stone did not have time to harden too much. Consider how you can flush the toilet popular sparing methods.
Method number 1 - soda with vinegar
It seems everyone knows how to wash the toilet with soda and vinegar, but there are some nuances. At first we prepare baking soda, one package will be quite enough. After that, we moisten the internal surface of the equipment, so we will prepare it for processing.
We fall asleep toilet bowl soda. It will stick to a wet surface. If there are areas with bloom and stone, be sure to literally coat them with wet soda.
We clean the toilet soda
Regular baking soda is a powerful detergent, only it needs to be properly used. It is effective both at separate application, and together with vinegar
We leave the toilet in this form for about half an hour. During this time, the soda will react with contaminants and begin to destroy them. After the time we take the container with vinegar. If only essence is available, it is better to dilute it. Carefully pour the vinegar on the surface of the toilet bowl sprinkled with soda. A violent reaction will begin, which will help remove contamination.
We take a brush and scrub the pollution, "helping" a boiling chemical reaction. After its completion, once again we pass the brush over the bowl and rinse the toilet well. It will take a few flushing or, if you do not want to wait until the tank is typed, you can rinse the equipment with clean water from a bucket.
Method number 2 - mustard powder
First prepare the cleaning mixture. To do this, take two tablespoons of mustard powder, add an equal amount of crystalline citric acid and four tablespoons of starch.
Mix thoroughly until a homogeneous mixture. We are starting to add pure water. Stir until a slurry is obtained. This will be our cleaning agent.
Mustard powder
The homemade mustard powder not only cleans, but also disinfects the toilet well. The components in the mix are completely harmless to plumbing.
Moisten the surface of the toilet bowl so that the mixture sticks better. Carefully distribute the composition of the bowl. Carefully rub the tool on particularly contaminated areas and leave in this form for about half an hour. Then rinsed with water and at the same time three brushes. Rinse off with clean water.
Method number 3 - vinegar and salt
This method is especially effective for getting rid of urinary stone. We will need one glass of nine percent table vinegar. If it is not, you can dilute acetic acid according to the instructions, which is usually present on the bottle.
Pour the vinegar in a dish that is not afraid of heating, and begin to warm the solution. It is important to remember that at this moment a strong smell may appear, so it is advisable to close the container tightly.
Preparation of cleaning agent
From the simplest ingredients that are in any home, you can prepare a powerful detergent. But it is important to keep proportions in order to increase the effectiveness of
Vinegar is heated to a temperature of about 40 ° C, after which we pour half a teaspoon of salt and mix well. The resulting solution carefully treat the surface of the toilet. In areas with particularly strong pollution, we increase the amount of the product, rubbing it into the stone.
We close the toilet lid and leave it in this condition at night. In the morning, we remove the solution along with the contaminants by lowering water from the tank.
Method number 4 - wood ash
To prepare the cleaning composition, we need an equal amount of wood ash and crystalline citric acid. Usually two standard packs of "lemon" and the same amount of ash are enough. All mix well.
Moisten the toilet bowl and fill it with the resulting product. Leave in this form at night. In the morning, clean the toilet with a brush and rinse it, washing away the remnants of the funds.
Solutions of acids of different concentrations
As you know, the acidic environment very well dissolves lime deposits and urinary stone. It is also effective against rust, which is why acids and products based on them are considered to be a good choice for cleaning a toilet bowl.
In practice, you can use various acids without mixing with other substances. The use of orthophosphoric acid is the best answer to the question of how to clean your toilet from rust.
The substance can easily be bought at a store where it is sold as an 85% solution. Means represents colorless syrupy very aggressive substance. You can work with it only with the use of protection.
Prepare a cleaning agent: take half a liter of pure water and dissolve 100 ml of phosphoric acid in it, stir until a homogeneous mixture is obtained.
Toilet bowl cleaning
Acids are able to clean up almost any contamination, but you need to remember that they can ruin the plastic parts of the toilet bowl and piping.
The bowl of the toilet bowl is degreased, rinsing with any soap detergent. After that, apply the prepared detergent, brush the surface, preferably with natural bristles. Leave the bowl with the solution for a while. Depending on the intensity of the pollution, it may take from 1 to 12 hours.
Over time, flush the toilet with a weak soda solution. For its preparation in every liter of water dissolve a tablespoon of soda.
Hydrochloric acid is also used to remove rust and plaque. But you need to know that it can not be used for equipment with plastic and rubber parts, as well as its use is excluded if the toilet is connected to a plastic pipe. The acid will dissolve the plastic.
Approximately half a cup of hydrochloric acid is poured into the bowl, where it is left for 15 minutes. Then the surface is washed with clean water.
Can be used to clean citric and acetic acid. Since their effect is somewhat weaker, this technique gives better results. Toilet paper is saturated with vinegar and placed under the rim and on contaminated sites.
It is likewise treated with citric acid, but since it is crystalline, it may be more convenient to apply it on a damp cloth. The tool is left for several hours, preferably at night. Wash with clean water in the morning.
Similar to citric acid, oxalic acid is used. This inexpensive tool can be purchased at hardware stores.
Oxalic acid
Oxalic acid is also widely used for cleaning plumbing. The powder is applied to a damp cloth and put on contaminated sites.
Often you can hear tips on the use of electrolyte for the battery as a cleaning agent. This is really effective, just need to remember that the liquid contains acids, so do not forget about caution and protection. Electrolyte process the bowl, leave for 20 minutes, then wash it off with water.
Abrasive Cleaners
In the compositions of this type necessarily present abrasives. These are very small, but sharp and hard particles, with the help of which mechanical surface treatment is carried out. Abrasives literally peel off dirt, thereby removing them from the surface. They are added in various quantities to the detergent.
In any case, such mixtures are undesirable to use on ceramics. This is especially true for sanitary porcelain. Abrasives leave scratch-like marks on a smooth surface. Over time, they accumulate more and more, the bowl becomes rough, literally "attracting" pollution.
Abrasive Cleaners
Powders with abrasives are very little, therefore, are very popular. However, it must be remembered that solids spoil the surface of sanitary equipment.
If you still want to use cleaning products of this type, you should read the instructions on the bank. Most often, in addition to abrasives, they contain some bleach. Therefore, most manufacturers advise to use their products in this way.
The powder is applied to a sponge moistened with water or directly on the bowl, after which it is intensively rubbed into the surface. Then you should leave the tool for some time in order to effectively "work". After that, once again thoroughly rub with a sponge and rinse with water.
Industrial cleaners
This is a large group of different formulations based on acids or alkalis. The former are more efficient because the acid copes better with the removal of rusty edema and limescale.
But alkaline agents work well against organic matter, respectively, perfectly decompose the urinary stone and fats. Consider the most popular formulations.
Gel "Cillit Bang" for toilet bowls
All products manufactured under this brand have the consistency of a gel. They are packaged in bottles with a convenient dispenser in the form of a spout, which helps to deliver the solution to the most hard-to-reach places.
The main active ingredient in the composition of the product is hydrochloric acid. Therefore, it is best to use against rust stains and limescale. In this case, do not forget about the means of protection.
Toilet Cleaners
Industrial cleaning products are very effective. You need to know that you can not mix them. An unpredictable chemical reaction can occur, which is very dangerous.
In the line of products you can find directional compounds: anti-rust, for disinfection, for bleaching or gloss, for hard-to-remove limescale. Consumers appreciate the high composition efficiency, economical consumption and convenient packaging.
Of the disadvantages, the most significant is the relatively high cost of the drug. But the gel is very easy to use. It should be applied to the bowl, leave for 15-20 minutes, then rinse.
“Domestos” for toilet
Under this brand popular popular multifunctional cleaner for toilets and other plumbing. The composition of the drug is alkali, well coping with the destruction of organic matter. For this reason, the means of limescaling is not very effective.
In addition, the tool contains chlorine bleach, so not only bleaches rust stains, but also disinfects the surface.
Available in several varieties of the drug, differing mainly in fragrances. The latter are necessary to dampen the extremely unpleasant smell of chlorine. Consumers appreciate the product for high efficiency, thick consistency and economical consumption. Of the disadvantages noted a sharp unpleasant smell of the drug.
Domestos is universal, in diluted form it can be used as a bleach and as a disinfectant for kitchen work surfaces. And in undiluted form, it and other equally effective means can be used to eliminate blockages in sewer pipes.
Cleaning agent “Toilet duckling”
Liquid product, produced in bottles of characteristic shape with a strongly curved neck, which allows you to apply the gel in the most inaccessible places. The duckling contains hydrochloric acid, so it does an excellent job with lime deposits and with rust stains.
Somewhat worse, but the drug also dissolves the urinary stone. The concentration of the acid is quite high, so the tool is aggressive towards bacteria.
Toilet duckling
Toilet duck is a very effective acid-based remedy. In addition to the universal manufacturer produces highly targeted drugs to solve various problems.
The drug has a pronounced disinfectant effect. When working with the composition must use protective equipment. Buyers noted the good efficacy of the drug, convenient packaging, budget cost.
Duck consists of chlorine derivatives, despite which it has a pleasant smell. The disadvantages include liquid consistency, which provokes a rapid consumption of the drug.
Cleaning tablets and cubes
Many housewives, thinking about how to clean their toilet from urinary stone, do not take into account the numerous tablets cleaners. They are produced by most manufacturers of household chemicals. This is an effective multi-functional tool that can not only clean the equipment, but also disinfect it and deodorize the air in the bathroom.
Tank cleaning pills
Cleaning pills for the tank - a practical multi-tool that can cope with the three main problems of sanitary equipment. The composition of these tablets and the concentration of active substances in them varies depending on the manufacturer.
Famous brands issue funds that operate for one to two months. The tablet in a water-soluble shell is lowered into the drain tank. Slowly dissolving, it gradually "gives" the active substances into the water. As a result, the parts of the cistern are cleaned. After pressing the flush button, the liquid enters the bowl, it is also cleaned of all types of contaminants.
In this case, the active substances freely fall on the most inaccessible areas and clean them. Means can have the most different aroma, the user chooses any pleasant smell.
Tablets are quite effective, especially if there are no old stains. Among the drawbacks of the product, it is worth noting that the preparation is quite fast, especially if a large number of people use the toilet.
Conclusions and useful video on the topic
With the help of video instructions, you can solve some of the problems associated with pollution of sanitary equipment in the toilet.
A simple way to clean the toilet with Coca-Cola and citric acid:
Cleaning the toilet - not the most pleasant of the lessons. However, this should be done regularly, so that later we should not use aggressive chemistry to bring the equipment in order.
If, however, plumbing has an unsightly appearance, it is necessary to determine the nature of the contaminants and select the most effective cleaning agent especially for them, since their range is very, very wide.
Are there other effective ways to clean the toilet from dirt and you successfully apply them in practice? Please tell about them to other visitors of our site in the block with comments. Or any questions about the topic of the article? Ask them, we will understand together.
3A-------xx