IT JUST Works! Grout-EEZ Super Heavy Duty Tile & Grout Cleaner and brightener. Quickly Destroys Dirt & Grime. Safe for All Grout. Easy to Use. 2 Pack with Free Stand-Up Brush. The Floor Guys

How to quickly and properly clean the floors in the house

Before you wash the floor, you must remove all objects that interfere with the process, remove all large debris, vacuum, or sweep. In the matter of how to properly clean the floor, the main thing is to know that the procedure will vary for different types of flooring, as well as the means to carry it out.

Basic rules for cleaning and cleaning the floor after whitewashing
Before you clean the floors clean, it is recommended to know about some of the nuances that will allow to achieve the maximum result. To begin to wash the floor should be from baseboards, moving from the walls to the center of the room to make it easier to collect with a rag or mop all the dirt. Unpainted surface should be moistened with a heated solution of water and soap, wiped with a brush, and then rinsed with water and wiped dry.

How to clean the floors clean

In the question of how to clean the floor clean, which is painted, will help ammonia, diluted in water. The surface is washed out, dries out for a while, and then it must be brought to shine with cloth. If there is a problem with how to clean the “sweet” floor, you need to add a little acetic acid to the water and carefully wipe the sticky place.

The sequence of actions when cleaning the surface after whitewashing, to avoid strong streaks, is as follows:

Pour all contaminated part with a solution of soap (highly concentrated);
After all the remnants of the repair otkisli, collect all the dirt with a rag, often rinsing it in water;
Add table salt or kerosene to a clean soap solution, moisten a rag in this solution and rinse the surface thoroughly;
The final stage - the use of warm water and rags.
Thus, the floor surface will be cleared of the remnants of repair, there will be no white streaks on the floor.

How to clean different flooring: comments hostesses
In the matter of how to clean the wooden floor, experienced housewives advise to use any detergent diluted with water. Be sure to carry out cleaning with a stiff brush, if the floors are unpainted. The resulting foam is washed off with water, and the moisture is collected with the help of rags.

Similarly, how to clean a wooden floor, you can handle painted surfaces, but without using a brush. You can take a mop and move from the farthest corner to the doorway. For the gloss of boards used a mixture of "denatured vegetable oil".

Quick clean linoleum
To clean the floor of linoleum, without leaving stains, as follows:

In a container of water, add grated soap;
Rag should be well wrung out and thoroughly rinsed with water;
Water should be changed frequently;
It is impossible to heat water for washing, to add soda, as when cleaning a laminate.
To avoid the appearance of cracks on linoleum, to give it a shiny look, you need to rub the surface with linseed oil or drying oil 1 time per month.

How to clean the floor

Laminate and parquet flooring tips
When cleaning the parquet, it’s important not how quickly to clean the floor, but how well it should be. The procedure is practically no different from washing floors made of wood, but it should be carried out less frequently - once a month. It is impossible to wet a rag, as the parquet should not absorb excess liquid. It is possible to add a few tablespoons of glycerin for cleaning gloss. Polishing should be carried out several times a month with a polishing brush.

10A----------------------xx