Lime-A-Way Toilet Bowl Cleaner, Liquid 16 oz (Pack of 2)
How to properly wash the toilet - instructions, tools, washing
Cleaning should be done in the correct order with special tools and detergents so that there are no germs and no unpleasant smell in the toilet.
How to wash the toilet
1. Wear rubber gloves.
They should be long, up to the elbows, so that the detergent does not get on the skin and does not cause a chemical burn.
After work, wash your hands with gloves and soap for disinfection. Instead of soap, hydrogen peroxide will do - wet a cotton pad and wipe the gloves outside. After washing your hands with soap and water.
2. Pour detergent under the rim of the toilet bowl and into the drain hole, distribute it with a brush and leave for 10-15 minutes.
The brush can be synthetic or silicone. Glass for the brush - plastic, glass or ceramic.
Disinfect the brush and tumbler once a week - pour detergent into the tumbler and leave for 15 minutes, then rinse with water. If the brush turns yellow and starts to smell, put it in a container, add detergent to disinfect, half a cup of soda, 60–70 grams of vinegar, hot water and leave for an hour. Then discard the container. Instead, it is better to buy a new brush.
Silicone brush that will replace the plunger
Floor brush with lid to prevent odor
Brush with removable brush
3. While the detergent disinfects the toilet, wash the seat and cover. Lather a napkin and wipe the seat, cover and bezel from all sides. Rinse the cloth and wipe again so that there is no money left on the seat, cover and rim. After use, wash the cloth with detergent, store separately from other napkins. Wash the walls around the toilet with another cloth: soap it and wipe the walls, rinse and wipe again, wash the cloth and clean.
4. After 10–15 minutes, take the brush, rub the walls and drain hole, simultaneously flush the water and continue rubbing to wash off the residual product.
The floor should be washed every day at the end of the cleaning. You can use those detergents with which you wash the floor in other rooms.
All the rest - shelves, cabinets, washing machine - wipe once a week with a damp cloth without detergent.
Detergents
I used the website Otzovik.com to compile the rating - I read the reviews for each detergent and arranged them in decreasing order of effectiveness.
All of these tools are suitable for removing germs and small contaminants, that is, to maintain cleanliness. To remove a large amount of rust, plaque or urinary stone, there are other ways.
How to remove urinary stone, limescale and rust
Stone and plaque are dark colored salt deposits that accumulate, interfere with the discharge of water and look repulsive.
Urinary stone
Limescale
Rust - are particles of oxidized metal, which fall into the water from rusty water pipes or from the tank, where there are metal parts.
Rust
If some tool did not help, repeat the procedure again or try another one, but you cannot mix the tools - they can react.
To clean the rust tank, pour a bottle of detergent (acetic, oxalic or citric acid) into the water, leave for 2 hours, rub with a brush and rinse. You can drain the water and process one of the ways above.
If these measures have to be applied more than once a month and rust quickly covers the plumbing, you need to change the old metal pipes to plastic.
48A-------xx