Lysol Power Toilet Bowl Cleaner, 48oz (2X24oz), 10X Cleaning Power (Pack of 2)

How to clean the toilet from stone and rust

The most common problem during toilet bowl cleaning is the removal of urinary stones and rust. One of the main reasons for the appearance of any traces on the perfect surface of your faience friend is lime.
How to remove plaque in the toilet?

Special pills for the tank prevent the formation of deposits and, when flushing, partially remove the existing plaque.
Cleaner will regularly protect the toilet from the appearance of plaque. Many hostesses consider Sanoks to be the best budget tool for the toilet. It removes even the strongest pollution. It is enough to clean it once a week. How to wash the toilet: fill the agent for 5 minutes, spread it over the surface, then wipe with a brush and rinse with water.
Abrasive powders - Pemolux is considered a proven agent. It is evenly applied to the surface and rubbed with a rag to completely remove dirt. Before this, do not forget to scoop up the water and wear protective gloves.
Alkaline products - based on a solution of sodium. Among these funds allocate "Whiteness" and "Domestos". To use them, it is necessary to remove water from the toilet bowl, apply the solution and wash it off after half an hour.

How to wash the toilet with the help of "folk remedies":

Dry oxalic acid - wipe it with dirt or dissolve a significant amount of the product in the toilet. Then clean the surface with a brush.
Battery electrolyte - also applies to acids. It must be applied to the surface of the toilet and leave for 15 minutes, then rinse.
Acetic essence - applied on a dry surface, valid for 10-15 minutes.

Some of these methods can damage the enamel of the toilet, so you should carefully select what to clean the toilet and wear rubber gloves to protect your hands.



46A-------xx