Unsealed floor grout is porous and stain-free. For grout Cleaning effectively, it is necessary to use a product that will infiltrate the material and lift dirt and stains. Once cleaned, a sealant can be applied to reduce porosity and prevent staining.
Instructions
1 Vacuum the entire floor thoroughly. Use a dry nylon brush on grout lines to loosen lint and other debris. Of emptiness again.
2 Sprinkle baking soda into the grout and then pour the smooth white vinegar over the powder. The mixture fizzles and impregnates the grout. Let the frothing mix for one minute then wipe with a damp sponge. Rinse and dry again. If grout is still stained, use a stronger cleaning agent such as oxygen bleach.
3 Mix oxygen bleach with water according to the label instructions. The use of rubber gloves, apply the mixture to the grout. Let the mixture rest in the grout for 30 to 60 minutes. Sponge the area with more solution if it starts to dry. Rinse several times. Allow grout to dry for several hours; Grout must be completely dry before cleaning can be determined. If stains are still evident, consider using chlorine.
4 diluted use of chlorine bleach in a proportion of one part chlorine to four parts water. They scrub the solution over the grout, making sure there is good ventilation. Do not allow this mixture over carpets or clothing, and do not use in colored grout. Let the mixture stand in place for ten minutes and then rinse several times.
Tips and warnings
- Call a professional steam cleaner if none of the above solutions bring your grout back to life. These companies use commercial quality equipment in steam and remove the dirt from their grout. They usually offer services such as clean sealing well. After, seal the grout. This is the best way to prevent future stains and keep your grout cleaner.
- Do not use a wire brush to clean the grout.